Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHASE STABILITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Experimental Analysis of Salt Hydrate Latent Heat Thermal Energy Storage System With Porous Aluminum Fabric and Salt Hydrate as Phase Change Material With Enhanced Stability and Supercooling

Phase change materials (PCMs), especially salt hydrates possess high volumetric energy storage capacity in their transition temperature range. These materials are used in applications where it is necessary to store thermal energy due to temporary load shift between demand and availability. Thus, possible applications are HVAC, recovery of waste heat, and defense thermal management. Despite salt hydrates potential, the practical feasibility of latent heat storage with salt hydrates is limited due to low power rating, supercooling, phase segregation, and long-term stability. Its low power rating and long-term stability limits its application in most applications. This work experimentally validates the stability and thermal performance of a compact heat exchanger charged with salt hydrate during melting and freezing. The compact heat exchanger was designed with fins on both the heat transfer fluid (HTF) and salt hydrate PCM side. The thermal performance of the latent heat thermal energy storage system (LHTESS) was evaluated for various operating conditions. The results show that LHTESS could achieve an average heat transfer coefficient of 124 and 87 W/(m2 K) during melting and solidification, respectively. The stability of the system in suppressing supercooling was validated over 800 cycles with nucleating agent and active homogenous nucleation techniques. The supercooling was reduced to 3 °C with zinc hydroxyl nitrate as nucleating agent and less than 1 °C with the active homogenous nucleation technique. The LHTESS showed less than 6% degradation in energy storage capacity over 800 cycles.

42 ENGINEERING↗
DOE OSTI2020

Structural, Spectroscopic, and Kinetic Insight into the Heating Rate Dependence of Studtite and Metastudtite Dehydration

Uranyl peroxide minerals studtite (UO 2 O 2 ·4H 2 O) and metastudtite (UO 2 O 2 ·2H 2 O) are important materials in the nuclear fuel cycle. When heated, they dehydrate and transform to amorphous uranium oxides (UO x ), yet phase stability and heating rate dependence of these transformations are poorly understood. This information is critical to proper management of fuel cycle materials. In this work, we use in situ powder X-ray diffraction (PXRD), Raman spectroscopy, and thermogravimetric analysis (TGA) to monitor the dehydration of studtite and metastudtite. Strong linear correlation between the heating rate and phase transition temperature is observed. Geometric contraction and diffusion-related kinetic models describe studtite dehydration at slow heating rates, whereas Avrami–Erofeev or reaction order models become more accurate for faster thermal treatments. A second order model describes the transition from metastudtite to UO x regardless of the heating rate. Water retention during studtite dehydration is indicated by PXRD, Raman spectroscopy, and TGA. Here, we observe mixed-phase UO x dehydration products of metastudtite with a likely formation mechanism involving conversion of some uranyl centers from hexagonal to pentagonal bipyramidal coordination units via peroxide liberation. Our observations clarify over 100 years of measurements on these materials and represent an advancement in understanding the chemical behavior of nuclear fuel cycle materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Helioseismic observations at Stanford, 1977-1986

Observations of low degree modes of solar oscillations were made at the Wilcox Solar Observatory for more than a decade. The set of observations from 1977 through 1986 are reexamined. The stability of the p-mode frequencies for modes of degree l=2-5 in each year is tested. A marginally significant trend of a decrease in p-mode frequencies of 0.06 microHz per year is found. The continuity of the observed signal at 160.01 minutes are also examined. It was found that the previously reported phase stability is no longer present. However, due to uncertainties in calibration, the reality of the reported signal can not be excluded.

Henning, H. M.↗
DOE OSTI2015

The generation of 68 Gbps quantum random number by measuring laser phase fluctuations

The speed of a quantum random number generator is essential for practical applications, such as high-speed quantum key distribution systems. Here, we push the speed of a quantum random number generator to 68 Gbps by operating a laser around its threshold level. To achieve the rate, not only high-speed photodetector and high sampling rate are needed but also a very stable interferometer is required. A practical interferometer with active feedback instead of common temperature control is developed to meet the requirement of stability. Phase fluctuations of the laser are measured by the interferometer with a photodetector and then digitalized to raw random numbers with a rate of 80 Gbps. The min-entropy of the raw data is evaluated by modeling the system and is used to quantify the quantum randomness of the raw data. The bias of the raw data caused by other signals, such as classical and detection noises, can be removed by Toeplitz-matrix hashing randomness extraction. The final random numbers can pass through the standard randomness tests. Our demonstration shows that high-speed quantum random number generators are ready for practical usage.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2021

Phase evolution during reactive flash sintering of Li 6.25 Al 0.25 La 3 Zr 2 O 12 starting from a chemically prepared powder

Here, reactive flash sintering (RFS) of a chemically prepared multiphase precursor powder was performed to fabricate Li 6.25 Al 0.25 La 3 Zr 2 O 12 (Al-LLZO) ceramics. This approach allowed for obtaining single-phase dense samples in a remarkably short processing time of 30 s, at a furnace temperature of 600 °C, with an electric field of 50 V cm -1 and a current limit of 150 mA mm -2 . The ceramics display high bulk conductivity of 0.18 mS cm -1 at room temperature. Furthermore, phase evolution is studied by in-situ X-ray diffraction during: i) conventional heating and ii) RFS under current rate mode. As expected, the intermediate phases progressively dissolved into the Al-LLZO matrix by conventional heating. On the other hand, RFS promoted the growth of the intermediate La 2 Zr 2 O 7 , an effect that was overcome by the thermally driven formation of Al-LLZO at higher temperatures. The observed different reaction pathway suggests that RFS can be used for stabilizing phases that are not thermodynamically favored upon conventional heating.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Imaginary phonon modes and phonon-mediated superconductivity in Y 2 C 3

For Y 2 C 3 with a superconducting critical temperature ($T_c$) ~18 K, zone-center imaginary optical phonon modes have been found for the high-symmetry I-43d structure due to C dimer wobbling motion and electronic instability from a flat band near Fermi energy. After lattice distortion to the more stable lowest-symmetry P1 structure, these stabilized low-energy phonon modes with a mixed C and Y character carry a strong electronphonon coupling to give rise to the observed sizable $T_c$. Our work shows that compounds with the calculated dynamical instability should not be simply excluded in the high-throughput search for new phonon-mediated superconductors. Moreover, we have studied the phase stability of the I-43d structure by calculating the enthalpy of different structural motifs of binary compounds containing group-IV elements at the 2:3 composition and also exploring the energy landscapes via ab initio molecular dynamics near and out of the I-43d structure. Here, our results show that the I-43d-type structures with C dimers are preferred in the low to medium pressure range. Because of the wobbling motion of the C dimers, there are many local energy minimums with degenerated energies. Thus, the ensemble average of many I-43d-distorted structures with C dimer wobbling motion at finite temperature still gives an overall I-43d structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

Design of a V–Ti–Ni alloy with superelastic nano-precipitates

Stress-induced martensitic transformations enable metastable alloys to exhibit enhanced strain hardening capacity, leading to improved formability and toughness. As is well-known from transformation-induced plasticity (TRIP) steels, however, the resulting martensite can limit ductility and fatigue life due to its intrinsic brittleness. In this work, we explore an alloy design strategy that utilizes stress-induced martensitic transformations but does not retain the martensite phase. This strategy is based on the introduction of superelastic nano-precipitates, which exhibit reverse transformation after initial stress-induced forward transformation. To this end, utilizing ab-initio simulations and thermodynamic calculations we designed and produced a V 45 Ti 30 Ni 25 (at%) alloy. In this alloy, TiNi is present as nano-precipitates uniformly distributed within a ductile V-rich base-centered cubic (bcc) β matrix, as well as being present as a larger matrix phase. We characterized the microstructure of the produced alloy using various scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. Furthermore, the bulk mechanical properties of the alloy are demonstrated through tensile tests, and the reversible transformation in each of the TiNi morphologies were confirmed by in-situ TEM micro-pillar compression experiments, in-situ high-energy diffraction synchrotron cyclic tensile tests, indentation experiments, and differential scanning calorimetry experiments. The observed transformation pathways and variables impacting phase stability are critically discussed.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Quantum paramagnetism in a non-Kramers rare-earth oxide: Monoclinic Pr 2 Ti 2 O 7

Little is so far known about the magnetism of the A 2 B 2 O 7 monoclinic layered perovskites that replace the spin-ice supporting pyrochlore structure for r A /r B > 1.78. We show that high quality monoclinic Pr 2 Ti 2 O 7 single crystals with a three-dimensional network of non-Kramers Pr 3+ ions that interact through edge-sharing superexchange interactions, form a singlet ground-state quantum paramagnet that does not undergo any magnetic phase transitions down to, at least, 1.8 K. The chemical phase stability, structure, and magnetic properties of the layered perovskite Pr 2 Ti 2 O 7 were investigated using x-ray diffraction, transmission electron microscopy, and magnetization measurements. Synthesis of polycrystalline samples with the nominal compositions of Pr 2 Ti 2+x O 7 (–0.16 ≤ x ≤ 0.16 ) showed that deviations from the Pr 2 Ti 2 O 7 stoichiometry lead to secondary phases of related structures including the perovskite phase Pr 2/3 TiO 3 and the orthorhombic phases Pr 4 Ti 9 O 24 and Pr 2 TiO 5 . No indications of site disordering (stuffing and antistuffing) or vacancy defects were observed in the Pr 2 Ti 2 O 7 majority phase. A procedure for growth of high-structural-quality stoichiometric single crystals of Pr 2 Ti 2 O 7 by the traveling solvent floating zone method is reported. Thermomagnetic measurements of single-crystalline Pr 2 Ti 2 O 7 reveal an isolated singlet ground state that we associate with the low-symmetry crystal electric-field environments that split the (2J + 1 = 9)-fold degenerate spin-orbital multiplets of the four differently coordinated Pr 3+ ions into 36 isolated singlets resulting in an anisotropic temperature-independent van Vleck susceptibility at low T. Here, a small isotropic Curie term is associated with 0.96(2)% noninteracting Pr 4+ impurities.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Reaction mechanism studies towards effective fabrication of lithium-rich anti-perovskites Li 3 OX (X=Cl, Br)

Lithium-rich Anti-perovskite (LiRAP), with general formula Li 3 OX (X = Cl, Br, I), and recently reported as superionic conductors with 3-dimensional Li + migrating channels, is emerging as a promising candidate for solid electrolyte of all-solid-state LIBs. But, it is still difficult to fabricate pure LiRAP due to the difficulty of the phase formation and moisture-sensitive nature of the products. In this work, we thoroughly studied the formation mechanism of Li 3 OCl and Li 3 OBr in various solid state reaction routes. We developed different experimental strategies in order to improve the syntheses, in purposes of improved phase stability and large-scale production of LiRAP. One feasible method is to use strongly reductive agents Li metal or LiH to eliminate OH species. The results show that LiH is more effective than Li metal because of negatively charged H - and uniform reaction. The other well-established method is using Li 2 O and LiX mixture as reagents to preventing OH phase at the beginning, and using protected ball milling to make fine powders and hence active the reaction. Finally, IR spectroscopy, thermal analyses and first-principle calculation were performed to give indications on the reaction pathway.

25 ENERGY STORAGE↗
DOE OSTI2026

Unlocking superplasticity in medium and high-entropy alloys

Superplasticity, the capacity of materials to sustain extraordinary tensile elongations at elevated temperatures, underpins a range of advanced metal-forming technologies. Conventionally, it is achieved in fine-grained alloys where deformation is dominated by grain-boundary sliding, accommodated by diffusion and dislocation activity. The advent of medium- and high-entropy alloys (M/HEAs), with their high chemical complexity and unconventional phase stability, offers new pathways to superplastic behavior beyond traditional alloy systems. Although investigated only recently, several M/HEAs already exhibit elongations that rival or exceed those of classical superplastic materials, particularly when ultrafine or metastable microstructures are engineered. Here, we review progress in understanding superplastic deformation in M/HEAs, emphasizing the interplay among composition, initial microstructure, thermomechanical processing, and microstructural evolution during high-temperature deformation. We discuss approaches to generating the fine-grained structures necessary for grain-boundary sliding, including severe plastic deformation and tailored heat treatments. We further highlight dynamic phenomena such as phase transformations, evolving grain-boundary chemistry, and deformation-induced grain refinement that can enhance plasticity in these systems. These mechanisms often shift the balance of deformation processes, enabling large elongations even outside classical criteria. Finally, we outline key challenges for application, including cost, scalability, recyclability, and microstructural stability.

klenam, Desmond [University of the Witwatersrand, ↗
DOE OSTI2019

Brownmillerite Phase Formation and Evolution in Epitaxial Strontium Ferrite Heterostructures

By controlling the synthesis and process conditions, we show that the oxygen vacancy channels (OVCs) of Brownmillerite-structured SrFeO2.5+? (0=??0.5) thin films can be oriented differently on the same LaAlO3(001) substrate due to either a bottom up or top down synthesis route. The brownmillerite structure formation and evolution processes yield distinctively different optical and electronic properties, owing to the difference in the oxygen content and OVC configuration in the resultant films. Moreover, we also show that in situ transmission electron microscopy (TEM) can induce oxygen loss and drive a phase transition from perovskite SrFeO3 to brownmillerite SrFeO2.5+? with mixed horizontally and vertically aligned OVCs. The dimensionality change during the TEM sample preparation makes the bottom up and top down model not applicable. Our results offer further insight into the phase stability and oxygen-diffusion mechanisms, which is important for the predictive synthesis of novel functional materials.

SrFeO3-d, compressive strain, oxygen vacancy chann↗
DOE OSTI2019

Investigating the stability of second phase particles in Zr-Nb alloys under irradiation

The stability of the β-Nb Second Phase Particles (SPPs) in two types of Zr–Nb alloys (recrystallised Zr-1.0Nb and Zr-2.5Nb) was studied by in-situ heavy ion irradiation in a transmission electron microscope (TEM), combined with ex-situ analysis by energy dispersive x-ray spectroscopy (EDX). TEM thin foils were irradiated by 1 MeV Kr + ions at four different temperatures from 50 K to 873 K, and by 350 keV Kr + ions at different doses up to 39dpa. The change in size of individual β-Nb SPPs has been measured quantitatively, and the degradation mechanisms under irradiation at different temperatures discussed. It has been shown that the Nb redistribution between the SPPs and the Zr matrix is governed both by radiation induced mixing and local diffusion in the surrounding Zr matrix. Finally, under the radiation conditions reported in this study, the β-Nb SPPs have shown remarkably stability against irradiation, and the extent of Nb redistribution between the SPPs and Zr matrix is very limited under all experimental conditions.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Influence of starting precursors and synthesis methods on the physiochemical properties of zirconia

Graphical abstract: Crystallite size of tetragonal phase of the zirconia samples prepared using different synthesis parameters and precursors as a function of calcination temperature. Surface area values of the zirconia samples calcined at 500 and 700 °C are in given brackets. - Highlights: • Zirconia prepared with modified sol–gel method is less stable compared with zirconia prepared by precipitation method. • Optimized synthesis conditions shifted the glow exotherm to higher temperature range indicating better thermal stability. • Tetragonal-zirconia could be synthesized in cost-effective manner using zirconium oxy-nitrate. • In our studies no co-relation between the surface area and crystallite size was observed. - Abstract: Under identical and judiciously pre-optimized synthesis conditions, the influence of different combinations of zirconium sources and/or post treatment conditions on structural properties, thermal stability, phase composition and morphology of zirconia has been investigated. High surface area tetragonal zirconia could be synthesized in a cost-effective manner from 1 M solution of zirconium oxy-nitrate at pH 11 using aqueous ammonia solution as a precipitant when calcined at 400 °C for 3 h. Irrespective of the preparation method, pH and starting precursor, zirconia samples prepared without digestion contained dominant monoclinic phase with some traces of tetragonal phase when calcined at 700 °C. Even though there is linear decrease in surface area with increase in the crystallite size for each sample as a function of calcination temperature, no co-relation between the surface area and crystallite size could be achieved. SEM images show agglomerated and irregular shape particles between 10 to 20 μm.

36 MATERIALS SCIENCE↗
NASA NTRS1999

Microgravity Processing of Oxide Superconductors

Considerable effort has been concentrated on the synthesis and characterization of high T(sub c) oxide superconducting materials. The YBaCuO system has received the most intense study, as this material has shown promise for the application of both thin film and bulk materials. There are many problems with the application of bulk materials- weak links, poor connectivity, small coherence length, oxygen content and control, environmental reactivity, phase stability, incongruent melting behavior, grain boundary contamination, brittle mechanical behavior, and flux creep. The extent to which these problems are intrinsic or associated with processing is the subject of controversy. This study seeks to understand solidification processing of these materials, and to use this knowledge for alternative processing strategies, which, at the very least, will improve the understanding of bulk material properties and deficiencies. In general, the phase diagram studies of the YBaCuO system have concentrated on solid state reactions and on the Y2BaCuO(x) + liquid yields YBa2Cu3O(7-delta) peritectic reaction. Little information is available on the complete melting relations, undercooling, and solidification behavior of these materials. In addition, rare earth substitutions such as Nd and Gd affect the liquidus and phase relations. These materials have promising applications, but lack of information on the high temperature phase relations has hampered research. In general, the understanding of undercooling and solidification of high temperature oxide systems lags behind the science of these phenomena in metallic systems. Therefore, this research investigates the fundamental melting relations, undercooling, and solidification behavior of oxide superconductors with an emphasis on improving ground based synthesis of these materials.

Olive, James R.↗
DOE OSTI2016

Vacancy structures and melting behavior in rock-salt GeSbTe

Ge-Sb-Te alloys have been widely used in optical/electrical memory storage. Because of the extremely fast crystalline-amorphous transition, they are also expected to play a vital role in next generation nonvolatile microelectronic memory devices. However, the distribution and structural properties of vacancies have been one of the key issues in determining the speed of melting (or amorphization), phase-stability, and heat-dissipation of rock-salt GeSbTe, which is crucial for its technological breakthrough in memory devices. Using spherical aberration-aberration corrected scanning transmission electron microscopy and atomic scale energy-dispersive X-ray mapping, we observe a new rock-salt structure with high-degree vacancy ordering (or layered-like ordering) at an elevated temperature, which is a result of phase transition from the rock-salt phase with randomly distributed vacancies. First-principles calculations reveal that the phase transition is an energetically favored process. Furthermore, molecular dynamics studies suggest that the melting of the cubic rock-salt phases is initiated at the vacancies, which propagate to nearby regions. The observation of multi-rock-salt phases suggests another route for multi-level data storage using GeSbTe.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Polytype selection in the antisolvent-free crystallization of formamidinium lead iodide using alkylammonium chlorides

This work presents a systematic study of how the size of the C 0 –C 4 alkylammonium chloride additive directs the crystallization pathway in antisolvent-free FAPbI 3 films. We find that larger cations promote the intermediate formation of hexagonal polytypes, correlating with enhanced film crystallinity. Understanding the nucleation, crystallization, and phase transition mechanisms in perovskite thin films produced without antisolvent quenching is crucial for improving phase stability and optoelectronic performance at scale. By means of in situ grazing incidence wide-angle X-ray scattering experiments, we show that the nature of alkylammonium chloride (RACl) additives significantly influences the crystallization dynamics and temperature-dependent stability of formamidinium lead iodide (FAPbI 3 ) perovskite films formed using antisolvent-free processes. The in situ experiments reveal that the effective radius of the RA + cation and the vapor pressure of the RA 0 conjugate base are critical factors affecting the crystallization pathway and film morphology. C 2 –C 3 additives with moderate chain lengths may strike a balance between promoting the early crystallization of the cubic 3C phase while suppressing unwanted phases. This balance promotes the formation of highly crystalline cubic perovskite phase with well-oriented structure and better optoelectronic properties. These findings provide guidance regarding the design of additives to crystallize more stable and efficient perovskite films for optoelectronic applications.

Marchezi, Paulo E↗
DOE OSTI2026

Selective transport of light vs. heavy rare earth elements by sulfate/bisulfate complexes in hydrothermal fluids

Here, this study explores the transport of rare earth elements (REE) in acidic sulfate-bearing hydrothermal fluids and the implications for the fractionation of light/heavy REE in critical mineral deposits. The speciation of Nd (light REE) and Yb (heavy REE) sulfate complexes were determined via in situ Raman spectroscopy using fused SiO 2 capillary cells up to 300 ºC at saturated water vapor pressure and in a hydrothermal diamond anvil cell up to 500 ºC and 540 MPa. The REE monosulfate (REESO 4 + ) and REE disulfate (REE(SO 4 ) 2 - ) species are stable below 150 to 250 ºC but become less stable at higher temperatures, particularly the light REE, due to the decreased solubility of REE sulfate solids. At higher pressure, these REE sulfate complexes display an increased stability field up to 400 ℃. The REE bisulfate complex (REEHSO 4 2+ ) was identified with a wide stability field below 400 ºC for the HREE in acidic Yb 2 (SO 4 ) 3 -bearing solutions, whereas in Nd 2 (SO 4 ) 3 -bearing solutions, the LREE bisulfate complex is restricted to below 100 ℃. These results suggest that bisulfate is a previously unrecognized selective ligand for heavy REE transport at low temperature in acidic oxidized hydrothermal fluids. Such fluids are responsible for hydrothermal alteration in many REE deposits. Prediction of phase stabilities across pressure, temperature, and composition space (P-T- x ) is crucial for predicting the role of aqueous REE sulfate complexes in the mobilization of REE in crustal fluids.

58 GEOSCIENCES↗
NASA NTRS1974

Parachute dynamics and stability analysis

The nonlinear differential equations of motion for a general parachute-riser-payload system are developed. The resulting math model is then applied for analyzing the descent dynamics and stability characteristics of both the drogue stabilization phase and the main descent phase of the space shuttle solid rocket booster (SRB) recovery system. The formulation of the problem is characterized by a minimum number of simplifying assumptions and full application of state-of-the-art parachute technology. The parachute suspension lines and the parachute risers can be modeled as elastic elements, and the whole system may be subjected to specified wind and gust profiles in order to assess their effects on the stability of the recovery system.

Ibrahim, S. K.↗