Search NASA⌕ Search

SEARCH · Search NASA

Results for “PHYSICS LABORATORY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Direct prediction of saturated neoclassical tearing modes in slab using an equilibrium approach

We demonstrate for the first time that the nonlinear saturation of neoclassical tearing modes (NTMs) can be found directly using a variational principle based on Taylor relaxation, without needing to simulate the intermediate, resistivity-dependent dynamics. As in previous investigations of classical tearing mode saturation (Loizu et al 2020 Phys. Plasmas 27 070701; Loizu and Bonfiglio 2023 J. Plasma Phys. 89 905890507), we make use of Stepped Pressure Equilibrium Code (SPEC) (Hudson et al 2012 Phys. Plasmas 19 112502), an equilibrium solver based on the variational principle of the multi-region relaxed magnetohydrodynamics (MHDs), featuring stepped pressure profiles and arbitrary magnetic topology. We work in slab geometry and employ a simple bootstrap current model J bs = C$\boldsymbol{\nabla}$p to study the bootstrap-driven tearing modes, scanning over the asymptotic matching parameter Δ' and bootstrap current strength. Saturated island widths produced by SPEC agree well with the predictions of an initial value resistive MHDs code (Huang and Bhattacharjee 2016 Astrophys. J. 818 20) while being orders of magnitude faster to calculate. Additionally, we observe good agreement with a simple analytical modified Rutherford equation, without requiring any fitting coefficients. The match is obtained for both linearly unstable classical tearing modes in the presence of bootstrap current, and NTMs, which are linearly stable but nonlinear-unstable due to the effects of the bootstrap current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Exascale workflow applications and middleware: An ExaWorks retrospective

Exascale computers offer transformative capabilities to combine data-driven and learning-based approaches with traditional simulation applications to accelerate scientific discovery and insight. However, these software combinations and integrations are difficult to achieve due to the challenges of coordinating and deploying heterogeneous software components on diverse and massive platforms. Here, we present the ExaWorks project, which addresses many of these challenges. We developed a workflow Software Development Toolkit (SDK), a curated collection of workflow technologies that can be composed and interoperated through a common interface, engineered following current best practices, and specifically designed to work on HPC platforms. ExaWorks also developed PSI/J, a job management abstraction API, to simplify the construction of portable software components and applications that can be used over various HPC schedulers. The PSI/J API is a minimal interface for submitting and monitoring jobs and their execution state across multiple and commonly used HPC schedulers. We also describe several leading and innovative workflow examples of ExaWorks tools used on DOE leadership platforms. Furthermore, we discuss how our project is working with the workflow community, large computing facilities, and HPC platform vendors to address the requirements of workflows sustainably at the exascale.

97 MATHEMATICS AND COMPUTING↗

Transition to Petschek Reconnection in Subrelativistic Pair Plasmas: Implications for Particle Acceleration

While relativistic magnetic reconnection in pair plasmas has emerged in recent years as a candidate for the origin of radiation from extreme astrophysical environments, the corresponding subrelativistic pair-plasma regime has remained less explored, leaving open the question of how relativistic physics affects reconnection. In this paper, we investigate the differences between these regimes by contrasting two-dimensional particle-in-cell simulations of reconnection in pair plasmas with relativistic magnetization (σ ≫ 1) and subrelativistic magnetization (σ < 1). By utilizing unprecedentedly large domain sizes and outflow boundary conditions, we demonstrate that lowering the magnetization results in a change in the reconnection geometry from a plasmoid chain to a Petschek geometry, where laminar exhausts bounded by slow-mode shocks emanate from a single diffusion region. We attribute this change to the reduced plasmoid production rate in the low-σ case: When the secondary tearing rate is sufficiently low, plasmoids are too few in number to prevent the system from relaxing into a stable Petschek configuration. This geometric change also affects particle energization: We show that while high-σ plasmoid chains generate power-law energy spectra, low-σ Petschek exhausts merely heat incoming plasma and yield negligible nonthermal acceleration. These results have implications for predicting the global current sheet geometry and the resulting energy spectra in a variety of systems.

Plasma astrophysics↗

Influence of preheating on tungsten damage under pulsed hydrogen plasma exposure

Preheated tungsten plate behavior under multiple pulsed hydrogen plasma irradiations in the PW-7 plasma accelerator was investigated. The preheating temperature was 973 K, which is above the ductile to brittle transition temperature (DBTT ≈ 673 K). The plate was exposed to three consecutive series of 13 plasma pulses each. Preheating sufficiently suppressed surface cracking at the early irradiation stage: after 13 pulses, cracks were rare, localized, and did not form extensive fractures. During subsequent irradiation series, the area fraction of fine cracks increased by ∼ 2% due to accumulation of dislocations around the pre-existing defects. However, their width remained nearly constant, averaging 0.2–0.3 μm, with rare cracks up to 1 μm in size. Repeated plasma exposure resulted in pronounced surface roughening associated with multiple melting cycles, crater formation and blister rupture, with roughness reaching ∼ 204 nm and a recorded sample mass loss of ∼ 2.8 mg. These results indicate that controlling tungsten preheating well above DBTT effectively reduces damage. However, the surface condition during initial irradiation significantly influences its subsequent morphological evolution. Preheating to 773 K, selected regarding the minimum DBTT value, has previously been demonstrated to be an effective approach for limiting crack growth. A further increase in temperature of approximately ∼ 1000 K did not qualitatively improve results: crack still formed and widths did not decrease. At the same time, the absence of further crack coarsening indicates that the limiting effect of preheating has been reached. Considering the increased energy costs, further increasing the preheating temperature seems unjustified.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Is there an exact magnetic moment for charged particle motion in a time-dependent, homogeneous magnetic field?

The non-perturbative guiding-centre model provides an exact alternative to full-orbit simulations of charged particle dynamics in situations where traditional guiding-centre theory may fail. We demonstrate that the charged particle motion in a homogeneous, time-varying magnetic field is a solvable example of the non-perturbative guiding-centre model. This entails showing that the exact magnetic moment of Qin and Davidson can be constructed to be asymptotic to the adiabatic invariant series of Kruskal. In contrast to the perturbative invariant, the exact invariant contains information about parametric resonances. These resonances destroy the conservation of the usual magnetic moment over very long times. This refutes some previous claims about the all-time invariance of the magnetic moment.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing the impact of oxygen negative ions on the self-organized pattern in 1 atm DC glow with liquid anode

In an atmospheric DC glow discharge with a liquid anode, the plasma anode glow attached to the grounded liquid surface under certain conditions self-organizes into coherent patterns. Optical emission spectroscopy revealed that the emission consists primarily of the second positive system of nitrogen, N 2 (C-B), whose excitation energy is low and sensitive to changes in the electron energy distribution. In addition to electrons, negative ions can accumulate in the anode sheath and affect the local space charge. It has been speculated that these negative ions play a role in pattern formation at the anode surface. In this work, the role of oxygen negative ions was explored. It was found that the formation of anode patterns requires at least a 7% volume fraction of oxygen in the ambient gas. Results showed that O 2 - is the dominant negative ion species in atmospheric DC glow discharge, with a density of ~10 12 cm -3 . While the presence of oxygen appears to be crucial for pattern formation, this study indicated that patterns still formed without geometric changes even when 62% of negative ions in the plasma were detached by a laser. This suggests that negative ions do not support the patterns, while oxygen's heating effect may induce instability at the anode.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Maintenance strategy, structural design, and site layout of the ST-E1 fusion power plant

An effective fusion reactor maintenance scheme enables safe operations and short downtimes. This in turn leads to high availability, which is critical to the commercial viability of a power-producing plant. In tokamak-based fusion power plants, the chosen maintenance approach has a significant impact on the spatial design of the tokamak, as well as the surrounding infrastructure, and therefore needs to be considered from the outset. Tokamak Energy has developed a pre-concept design of a fusion power plant, ST-E1. This work describes the major drivers and constraints that have been considered, presents the tokamak architecture and chosen maintenance regime, and discusses how this enables the plant’s two-phased approach to demonstrating commercial operations. It also shows the implications for the design of other systems areas, in particular the machine structural arrangement and bioshield and hot cell layout. The reactor core segmentation and removal scheme replaces entire toroidal segments radially through a large vacuum port, along a single axis only. The result is a change-tolerant machine and plant layout that can accommodate the evolving designs of the tokamak.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Postdoctoral positions in Experimental Physics - Acoustics at Los Alamos National Laboratory

We are seeking a postdoctoral research associate to join our Acoustics and Sensors Team of the Materials Physics and Applications Division at the Los Alamos National Laboratory LANL). We solve challenging technical problems for the industry and the US government, typically involving development of novel sensors (with particular emphasis on acoustic sensors) to characterize materials (solids, liquids, gases) in a non-invasive manner.

99 GENERAL AND MISCELLANEOUS↗

The Dresden Felsenkeller shallow-underground accelerator laboratory for nuclear astrophysics - Status and first physics program

Favored by the low background in underground laboratories, low-background accelerator-based experiments are an important tool to study nuclear reactions involving stable charged particles. This technique has been used for many years with great success at the 0.4 MV LUNA accelerator in the Gran Sasso laboratory in Italy, protected from cosmic rays by 1400 m of rock. However, the nuclear reactions of helium and carbon burning and the neutron source reactions for the astrophysical s-process require higher beam energies than those available at LUNA. Also the study of solar fusion reactions necessitates new data at higher energies. As a result, in the present NuPECC long range plan for nuclear physics in Europe, the installation of one or more higher-energy underground accelerators is strongly recommended. An intercomparison exercise using the same High-Purity Ge detector at several sites has shown that, with a combination of 45 m rock overburden, as can be found in the Felsenkeller underground site in Dresden, and an active veto against the remaining muon flux, in a typical nuclear astrophysics setup a background level can be achieved that is similar to the deep underground scenario as in the Gran- Sasso underground laboratory, for instance. Recently, a muon background study and geodetic measurements were carried out by the REGARD group. It was estimated that the rock overburden at the place of the future ion accelerator is equivalent to 130 m of water. The maximum muon flux measured was 2.5 m{sup -2} sr{sup -1} s{sup -1}, in the direction of the tunnel entrance. Based on this finding, a used 5 MV pelletron tandem accelerator with 250 μA up-charge current and external sputter ion source has been obtained and transported to Dresden. Work on an additional radio-frequency ion source on the high voltage terminal is in progress and far advanced. The installation of the accelerator in the Felsenkeller is expected for the near future. The status of the project and the planned access possibilities for external users will be reported, together with the instrumentation to be installed and proposals for the first solar physics measurements to be done at this new low-background facility. (authors)

43 PARTICLE ACCELERATORS↗

Enhanced shear stabilization of turbulence in NSTX

In studying a particular non-stationary NSTX L-mode plasma, we observed unexpectedly high levels of flux—first with quasilinear (TGLF) modeling and subsequently with nonlinear gyrokinetic simulations. Upon more detailed analysis, a novel confinement regime was discovered in which a modest increase in E x B shear (beyond baseline experimental estimates) rapidly reduced turbulent transport to levels consistent with power balance. This modest increase is plausible given the errors inherent to the estimation of shearing rates, and the added complexity of the non-stationary (time-dependent) power balance. Remarkably, an additional small increase in shear yields the familiar ion-neoclassical transport level with what appears to be the onset of high-k electron transport only. Although analyses using the TGLF-SAT2 model successfully capture numerous parametric dependencies of this plasma, TGLF does not reproduce the rapid E x B stabilization seen in CGYRO. We believe the results presented should help to better characterize the nonlinear physics of spherical tokamak confinement regimes, provide useful ST datasets for reduced model development, and motivate more accurate experimental diagnosis of E x B shearing rates.

Atomic and molecular collisions↗

Including the vacuum energy in stellarator coil design

Being three-dimensional, stellarators have the advantage that plasma currents are not essential for creating rotational-transform; however, the external current-carrying coils in stellarators can have strong geometrical shaping, which can complicate the construction. Reducing the inter-coil electromagnetic forces acting on strongly shaped 3D coils and the stress on the support structure while preserving the favorable properties of the magnetic field is a design challenge. In this work, we recognize that the inter-coil forces are the gradient of the vacuum magnetic energy. We introduce an objective functional built on the usual quadratic flux on a prescribed target surface together with a weighed penalty on the vacuum energy. The Euler–Lagrange equation for stationary states is derived, and numerical illustrations are computed using a modern stellarator optimization framework. A study of the effect of the energy functional on the inter-coil forces is conducted and the energy is shown to be a promising quantity in producing coils with low forces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Verification of the Shafranov shift in free-boundary VMEC, DESC, and SPEC calculations with elliptical geometry

Here, given a set of current-carrying filaments that create a magnetic field with rotating elliptical flux surfaces, we present verification calculations using the VMEC, DESC, and SPEC free-boundary magnetohydrostatic equilibrium codes for both the “vacuum” equilibrium, for which there is no plasma pressure and no plasma currents, and for a non-zero pressure, zero toroidal current equilibrium. For the vacuum case, these codes are quantitatively compared to the magnetic field produced by the coils. For the non-zero pressure case, they are compared to each other. As the stepped pressure profile used in SPEC approaches the continuous profile used in VMEC and DESC, the SPEC magnetic axis approaches the VMEC and DESC axes. To within an error given by the difference between the pressure profiles, the VMEC, DESC, and SPEC calculations give the same pressure-induced geometric shift of the magnetic axis, known as the Shafranov shift.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Characterizing the negative triangularity reactor core operating space with integrated modeling

Negative triangularity (NT) has received renewed interest as a fusion reactor regime due to its beneficial power-handling properties, including low scrape-off layer power and a larger divertor wetted area that facilitates simple divertor integration. NT experiments have also demonstrated core performance on par with positive triangularity (PT) high confinement mode (H-mode) without edge-localized modes (ELMs), encouraging further study of an NT reactor core. In this work, we use integrated modeling to scope the operating space around two NT reactor strategies. The first is the high-field, compact fusion pilot plant concept Modular, Adjustable, NT ARC (MANTA) and the second is a low field, high aspect ratio concept based on work by Medvedev et al. By integrating equilibrium, core transport, and edge ballooning instability models, we establish a range of operating points with less than 50 MW scrape-off layer power and fusion power comparable to PT H-mode reactor concepts. Heating and seeded impurities are leveraged to accomplish the same fusion performance and scrape-off layer exhaust power for various pressure edge boundary conditions. Scans over these pressure edge conditions accommodate any current uncertainty of the properties of the NT edge and show that the performance of an NT reactor will be extremely dependent on the edge pressure. The high-field case is found to enable lower scrape-off layer power because it is capable of reaching high fusion powers at a relatively compact size, which allows increased separatrix density without exceeding the Greenwald density limit. Adjustments in NT shaping exhibit small changes in fusion power, with an increase in fusion power density seen at weaker NT. Infinite-n ballooning instability models indicate that an NT reactor core can reach fusion powers comparable to leading PT H-mode reactor concepts while remaining ballooning-stable. Seeded krypton is leveraged to further lower scrape-off layer power since NT does not have a requirement to remain in H-mode while still maintaining high confinement. We contextualize the NT reactor operating space by comparing to popular PT H-mode reactor concepts, and find that NT exhibits competitive ELM-free performance with these concepts for a variety of edge conditions while maintaining relatively low scrape-off layer power.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Shock and Detonation Physics at Los Alamos National Laboratory

WX-9 serves the Laboratory and the Nation by delivering quality technical results, serving customers that include the Nuclear Weapons Program (DOE/NNSA), the Department of Defense, the Department of Homeland Security and other government agencies. The scientific expertise of the group encompasses equations-of-state, shock compression science, phase transformations, detonation physics including explosives initiation, detonation propagation, and reaction rates, spectroscopic methods and velocimetry, and detonation and equation-of-state theory. We are also internationally-recognized in ultra-fast laser shock methods and associated diagnostics, and are active in the area of ultra-sensitive explosives detection. The facility capital enabling the group to fulfill its missions include a number of laser systems, both for laser-driven shocks, and spectroscopic analysis, high pressure gas-driven guns and powder guns for high velocity plate impact experiments, explosively-driven techniques, static high pressure devices including diamond anvil cells and dilatometers coupled with spectroscopic probes, and machine shops and target fabrication facilities.

36 MATERIALS SCIENCE↗

An Overview of the Computational Physics and Methods Group at Los Alamos National Laboratory

CCS Division was formed to strengthen the visibility and impact of computer science and computational physics research on strategic directions for the Laboratory. Both computer science and computational science are now central to scientific discovery and innovation. They have become indispensable tools for all other scientific missions at the Laboratory. CCS Division forms a bridge between external partners and Laboratory programs, bringing new ideas and technologies to bear on today’s important problems and attracting high-quality technical staff members to the Laboratory. The Computational Physics and Methods Group CCS-2 conducts methods research and develops scientific software aimed at the latest and emerging HPC systems.

97 MATHEMATICS AND COMPUTING↗

Methanol adsorption and dissociation on GaP(110) studied by ambient pressure X-ray photoelectron spectroscopy

Ambient pressure X-ray photoelectron spectroscopy (AP-XPS) was used to investigate methanol (CH 3 OH) adsorption and reaction on the GaP(110) surface. Exposure of CH 3 OH to GaP(110) at room temperature led to the formation of at least four different surface species as indicated by analysis of C 1s and O 1s XPS features. By combining AP-XPS data with density functional theory calculations, the surface species were identified as methoxy (CH 3 O*), formaldehyde (CH 2 O*), and paired methanol (p-CH 3 O*H) and methoxy (p-CH 3 O*) species, where “paired” means that they belong to a hydrogen-bonded methoxy-methanol complex. Asterisk * here indicates an adsite. The formation of CH 2 O* via the dehydrogenation of CH 3 O* was shown to be limited by the availability of vacant phosphorus (P) sites on GaP(110). With an increase in CH 3 OH pressure, the fractional coverage of CH 3 O* species reached 0.55, and the surface P sites were completely saturated with hydrogen. Under a constant CH 3 OH pressure of 0.5 Torr, the surface concentration of the paired species and of CH 2 O* remained constant until 400 K. At higher temperatures, thermally driven reactions led to a significant increase in the concentration of surface CH x * species, which suggests that C-O bond cleavage of the CH 3 O group is the dominant decomposition mechanism on GaP(110). In conclusion, based on the reactivity of GaP(110) toward CH 3 OH dehydrogenation, elevated temperatures and CH 3 OH pressures may be used to functionalize this surface.

36 MATERIALS SCIENCE↗