Search NASA⌕ Search

SEARCH · Search NASA

Results for “PRESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Reduced-temperature processing and consolidation of ultra-refractory Ta4HfC5

TaC, HfC, and WC powders were subjected to high-energy milling and hot pressing to produce Ta4HfC5, a composite of Ta(4)HfC5 + 30 vol.% WC, and a composite of Ta4HfC5 + 50 vol.% WC. Sub-micron powders were examined after four different milling intervals prior to hot pressing. XRD was used to verify proper phase formation. SEM, relative density, and hardness measurements were used to examine the resulting phases. Hot pressed compacts of Ta4HfC5 showed densification as high as 98.6% along with Vickers hardness values of 21.4 GPa. Similarly, Ta4HfC5 + 30 vol.% WC exhibited 99% densification with a Vickers hardness of 22.5 GPa. These levels of densification were achieved at 1500 degrees C, which is lower than any previously reported sintering temperature for Ta4HfC5. Microhardness values measured in this study were higher than those previously reported for Ta4HfC5. The WC additions to Ta4HfC5 were found to improve densification and increase microhardness. (C) 2013 Elsevier Ltd. All rights reserved.

36 MATERIALS SCIENCE↗

Physical properties of madocite: A quaternary chalcogenide with very low thermal conductivity

The madocite Pb{sub 17}(Sb{sub 0.75}As{sub 0.25}){sub 16}S{sub 41} was synthesized by reaction of binary compounds and densified using hot pressing. The optical band-gap, thermal stability, and temperature-dependent heat capacity and thermal conductivity are reported for the first time. The thermal properties are evaluated using the Debye model. The findings in this work lay the foundation for a more detailed understanding of the physical properties of this material, and is part of the continuing effort in investigating materials with new compositions that possess low thermal conductivity for potential low-cost thermal barrier coating and energy-related applications. - Graphical abstract: The report describes the synthesis and physical properties characterization of Pb{sub 17}(Sb{sub 0.75}As{sub 0.25}){sub 16}S{sub 41}, a quaternary chalcogenide with the madocite crystal structure that possesses a low thermal conductivity, for the first time. The compositions was synthesized by reaction of binary compounds and densified using hot pressing. Optical band-gap, thermal stability, and temperature-dependent heat capacity measurements are also discussed. - Highlights: • Pb{sub 17}(Sb{sub 0.75}As{sub 0.25}){sub 16}S{sub 41} was synthesized by reaction of binary compounds and densified using hot pressing. • We report the characterizations of this quaternary chalcogenide that possesses a low thermal conductivity for the first time. • The optical band-gap, thermal stability, and temperature-dependent heat capacity are also investigated for the first time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanically induced self-propagating reaction and consequent consolidation for the production of fully dense nanocrystalline Ti{sub 55}C{sub 45} bulk material

We employed a high-energy ball mill for the synthesis of nanograined Ti{sub 55}C{sub 45} powders starting from elemental Ti and C powders. The mechanically induced self-propagating reaction that occurred between the reactant materials was monitored via a gas atmosphere gas-temperature-monitoring system. A single phase of NaCl-type TiC was obtained after 5 h of ball milling. To decrease the powder and grain sizes, the material was subjected to further ball milling time. The powders obtained after 200 h of milling possessed spherical-like morphology with average particle and grain sizes of 45 μm and 4.2 nm, respectively. The end-products obtained after 200 h of ball milling time, were then consolidated into full dense compacts, using hot pressing and spark plasma sintering at 1500 and 34.5 MPa, with heating rates of 20 °C/min and 500 °C/min, respectively. Whereas hot pressing of the powders led to severe grain growth (∼ 436 nm in diameter), the as-spark plasma sintered powders maintained their nanograined characteristics (∼ 28 nm in diameter). The as-synthesized and as-consolidated powders were characterized, using X-ray diffraction, high-resolution electron microscopy, and scanning electron microscopy. The mechanical properties of the consolidated samples obtained via the hot pressing and spark plasma sintering techniques were characterized, using Vickers microhardness and non-destructive testing techniques. The Vickers hardness, Young's modulus, shear modulus and fracture toughness of as-spark plasma sintered samples were 32 GPa, 358 GPa, 151 GPa and 6.4 MPa·m{sup 1/2}, respectively. The effects of the consolidation approach on the grain size and mechanical properties were investigated and are discussed. - Highlights: • Room-temperature synthesizing of NaCl-type TiC • Dependence on the grain size on the ball milling time • Fabrication of equiaxed nanocrystalline grains with a diameter of 4.2 nm • Fabrication of nanocrystalline bulk TiC material by SPS with minimal grain growth • Dependence of improved mechanical properties on the consolidation techniques.

36 MATERIALS SCIENCE↗

Meso-scale microstructural agglomerate quantification in boron carbide using X-ray microcomputed tomography

Highlights: • First known quantification of agglomerate defect distributions comprising of carbonaceous and aluminum nitride phases B{sub 4}C. • In-depth statistical analyses of the size, orientation, and morphology of the defects. • The determination of directional dependence of the hot-pressing direction on the agglomerate distributions. - Abstract: Failure in brittle materials is governed, in part, by the specific microstructure of that material, with heterogeneous microstructures generally leading to reduced mechanical properties and performance. In ceramics used for armor, an increase in compressive strength can be an indicator of improved ballistic performance. In hot-pressed boron carbide (B{sub 4}C) ceramic plates, failure has been attributed to carbonaceous flakes observed on the fracture surfaces of failed specimens. However, this current work shows agglomerates, in addition to the carbonaceous flakes, are present in this boron carbide. The density and distribution of these agglomerates are believed to influence the ballistic performance. Therefore, it is of interest to improve the quantification of meso-scale microstructural agglomerates so that strategies can be developed to mitigate them. This work is focused on the microstructural characterization of dumbbell-shaped compression specimens that were machined from a single tile of pressure-aided densification (PAD) B{sub 4}C, using high-resolution micro-computed tomography (microCT). Large clusters of non-B{sub 4}C agglomerates, up to 125 μm in diameter, were observed in addition to the typical smaller carbonaceous flakes and aluminum-based phases. Agglomerate size distribution, orientation, morphology, and spacing were quantified both parallel and perpendicular to the pressing direction. This defect quantification provides valuable information for a better understanding of the material microstructure which is a critical step in improving armor materials for the future.

36 MATERIALS SCIENCE↗

One component metal sintering additive for {beta}-SiC based on thermodynamic calculation and experimental observations

Graphical abstract: . Standard Gibbs formation free energies vs. temperature for various metal carbides. The heavy line represents the standard Gibbs free energy for {beta}-SiC. The hatched area denotes the typical liquid phase hot pressing temperature of {beta}-SiC (1973-2123 K). Highlights: {yields} Various metal elements were examined as a sintering additive for {beta}-SiC. {yields} Al and Mg enhanced the density significantly without decomposing {beta}-SiC, as predicted by thermodynamic simulation. {yields} Cr, Fe, Ta, Ti, V and W additives formed metal carbide and/or silicide compounds by decomposing {beta}-SiC. {yields} This approach would be useful for selecting effective sintering additive for high temperature ceramics. -- Abstract: Various types of metals were examined as sintering additives for {beta}-SiC by considering the standard Gibbs formation free energy and vapor pressure under hot pressing conditions (1973-2123 K), particularly for applications in nuclear reactors. Metallic elements having the low long-term activation under neutron irradiation condition, such as Cr, Fe, Ta, Ti, V and W, as well as widely used elements, Al, Mg and B, were considered. The conclusions drawn from thermodynamic considerations were compared with the experimental observations. Al and Mg were found to be effective sintering additives, whereas the others were not due to the formation of metal carbides or silicides from the decomposition of SiC under hot pressing conditions.

36 MATERIALS SCIENCE↗

A new n-type half-Heusler thermoelectric material NbCoSb

Highlights: • Half-Heusler alloy NbCoSb with 19 valence electron count was studied as TE material. • It is surprising that NbCoSb is n-type. • A maximum ZT of ∼0.4 is achieved at 700 °C without optimization. • It opens up a new route to develop new half-Heusler thermoelectric materials. • It is very interesting that a traditionally thought of VEC of 18 is not required. - Abstract: We surprisingly made a new n-type thermoelectric compound NbCoSb with half-Heusler (HH) structure having valence electron count of 19, different from the traditional 18, which opens up a new route to develop new half-Heusler thermoelectric materials not following the traditional valence electron count of 18. The samples are made by arc melting followed by ball milling and hot pressing. The effect of hot pressing temperature on the thermoelectric properties of NbCoSb samples has been studied. A maximum thermoelectric figure-of-merit (ZT) of ∼0.4 is achieved at 700 °C in NbCoSb sample that is hot pressed at 1000 °C. This work add a new member to HH compounds for thermoelectric applications, although the peak ZT of ∼0.4 is still lower than that of the traditional HHs. Moreover, it is very interesting to see that a traditionally thought of valence electron counts of 18 is not required.

36 MATERIALS SCIENCE↗

Tunning of microstructure and thermoelectric properties of Ca{sub 3}Co{sub 4}O{sub 9} ceramics by high-magnetic-field sintering

The structural, magnetic, electrical, and thermal transport properties of Ca{sub 3}Co{sub 4}O{sub 9} ceramics sintered under high magnetic field were investigated. Crystal grain texturing and densification were achieved through cold-pressing and high-magnetic-field sintering techniques. The c-axis of the layered crystal grain was partly oriented along the c-axis of the pressed samples via a cold-pressing technique, and the degree of orientation was further increased while applying the magnetic field in the sample sintering progress. The easy magnetization axis of Ca{sub 3}Co{sub 4}O{sub 9} polycrystalline ceramics was found to be the c-axis. The room-temperature resistivity along the ab-plane of the sample sintered under 8 T magnetic field was about 30% smaller than that of the sample sintered without magnetic field, and the Seebeck coefficient of the former reached 177.7 {mu}V/K at the room temperature, which is about 50% larger than that of the latter. Consequently, for the sample sintered at 8 T magnetic field, the power factor along the ab-plane was enhanced by about 1.8 times compared to the sample without magnetic field sintering. The obtained result is suggested to originate from the variations of the carrier mobility and spin-orbital degeneracy due to high-magnetic-field sintering in the progress of the sample preparation.

36 MATERIALS SCIENCE↗

Shock compression behavior of bi-material powder composites with disparate melting temperatures

Laser driven experiments were used to investigate the shock compression behavior of powder processed Bismuth/Tungsten (Bi/W) composite samples. The constituents provide different functionality to the composite behavior as Bi could be shock melted at the pressures attained in this work, while the W could not. Samples were prepared by uniaxial pressing, and the relative density was measured as a function of particle size, applied pressure, and composition for both hot and cold pressing conditions. This resulted in sample densities between 73% and 99% of the theoretical maximum density, and also noticeable differences in microstructure in the hot and cold pressed samples. The compression waves were generated with a 1.3 × 1.3 mm square spot directly onto the surface of the sample, using irradiances between 10{sup 12} and 10{sup 13} W/cm{sup 2}, which resulted in calculated peak pressures between 50 and 150 GPa within a few micrometers. Sample recovery and post-mortem analysis revealed the formation of a crater on the laser drive surface, and the depth of this crater corresponded to the depth to which the Bi had been melted. The melt depth was found to be primarily a function of residual porosity and composition, and ranged from 167 to 528 μm. In general, a higher porosity led to a larger melt depth. Direct numerical simulations were performed, and indicated that the observed increase in melt depth for low-porosity samples could be largely attributed to increased heating associated with work done for pore collapse. However, the relative scaling was sensitive to composition, with low volume fraction Bi samples exhibiting a much stronger dependence on porosity than high Bi content samples. Select samples were repeated using an Al foil ablator, but there were no noticeable differences ensuring that the observed melting was indeed pressure-driven and was not a result of direct laser heating. The resultant microstructures and damage near the spall surface were also investigated qualitatively.

36 MATERIALS SCIENCE↗

How Gamification will change Business Intelligence

In 1958, William Higginbotham was part of the Brookhaven National Laboratory (BNL) Instrumentation Division. In those days, BNL hosted a visitors day each fall. This was an opportunity for thousands of visitors to come and tour the lab and get a better understanding of the capabilities and operations at a nuclear research facility. William Higinbotham wanted to do something that would impress the audience as well as demonstrate the capabilities of the instrumentation division. Higinbotham came up with an idea that would allow the audience to play a simulated game of table tennis. By utilizing an analog computer and an oscilloscope, Higinbotham created the first publically available video game. The game was very simple and simulated the vertical side of a tennis court, the edge of the floor with the edge of the net perpendicular, on a screen. Each player had a button and a rotating knob. Rotating the knob would change the angle of the bar controlling the ball; pressing the button sent the ball toward the opposite side of the court. If the ball hit the net, it rebounded at an unexpected angle. If the ball went over and was not hit back, it would hit the floor and bounce again at a natural angle. If it disappeared off the screen, a reset button could be pressed, causing the ball to reappear and remain stationary until the user pressed the button to send the ball flying back across the net. Higginbotham recounted that "it was a simple design. Back then, analog computers were used to work out all kinds of mechanical problems. They didn't have the accuracy of digital computers, which were very crude at the time, but then you don't need a great deal of precision to play TV games. " The game was wildly successful and Higinbotham could tell from the crowd’s reaction that he had developed something very special. From the days of Higinbotham’s rudimentary version of the classic game Pong, video games have matured and become much more complex. Not only has the technology advanced, allowing for better graphics, sound and game play, but also significant research has been done in the area of game mechanics. “Game mechanics are rule based systems that facilitate and encourage a user to explore and learn the properties of their possibility space through the use of feedback mechanisms.” (Koster, 2004) As these game mechanics become better understood, they are being applied to areas outside of the realm of video game development. Game mechanics have become the basis for understanding the psychological drivers of users in the digital world. Business Intelligence, part of this digital experience, can learn some great lessons in how to engage users and revolutionize the user experience through the application of these game mechanics. In the tradition of BNL’s innovative spirit and as a sister laboratory in the Department of Energy laboratory complex, Idaho National Laboratory (INL) looks to determine how we can enhance the user experience through the effective application of game mechanics to Business Intelligence to meet the needs of our business.

99 GENERAL AND MISCELLANEOUS↗

The aqueous corrosion behavior of technetium - Alloy and composite materials

Metal waste forms are under study as possible disposal forms for technetium and other fission products. The alloying of Tc is desirable to reduce the melting point of the Tc-containing metal waste form and potentially improve its corrosion resistance. Technetium-nickel composites were made by mixing the two metal powders and pressing the mixture to make a pellet. The as-pressed composite materials were compared to sintered composites and alloys of identical composition in electrochemical corrosion tests. As-pressed samples were not robust enough for fine polishing and only a limited number of corrosion tests were performed. Alloys and composites with 10 wt% Tc appear to be more corrosion resistant at open circuit than the individual components based on linear polarization resistance and polarization data. The addition of 10 wt% Tc to Ni appears beneficial at open circuit, but detrimental upon anodic polarization. Qualitatively, the polarizations of 10 wt% Tc alloys and composites appear like crude addition of Tc plus Ni. The 1 wt% Tc alloys behave like pure Ni, but some effect of Tc is seen upon polarization. Cathodic polarization of Tc by Ni appears feasible based on open circuit potential measurements, however, zero resistance ammetry and solution measurements are necessary to confirm cathodic protection.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Effect of laminae count and manufacturing methods on mechanical properties of thin‐ply woven composites

Abstract Thin‐ply woven composites exhibit exceptional mechanical performance by delaying the onset of damage, making them suitable for high‐performance structural applications. This study outlines the impact of manufacturing techniques (vacuum bagging and hot pressing), ply count, and fiber waviness on the mechanical properties of aromatic thermosetting copolyester/carbon‐fiber (ATSP/CF) composites. The analysis encompasses several different ply counts, evaluating their effects on the in‐plane elastic modulus (0°–90°) and tensile strength. Results demonstrate that reducing the waviness (or crimp) ratio significantly enhances the in‐plane elastic modulus, with improvements up to 188%, highlighting the importance of fiber alignment. Vacuum bagging produced ply thicknesses from 128 to 58 μm for 1–36 plies, with in‐plane elastic moduli from 30.3 to 87.2 GPa, and 4‐ and 8‐ply samples showed approximately 40% higher stiffness than those made by hot pressing. ATSP resin with high thermal stability (up to 400°C) and recyclability was used. Furthermore, this study highlights the microstructural enhancements achieved through vacuum bagging, as revealed by scanning electron and optical microscopy, and micro‐computed tomography imaging. This paper provides insights into damage mitigation and achieving enhanced mechanical properties by controlling fiber waviness using vacuum bagging and higher ply count in thin‐ply ATSP/CF composites. Highlights Crimp ratio reduction enhances elastic in‐plane elastic modulus up to 188%. Vacuum bagging increases modulus over the hot pressing manufacturing method by 40%. Lowering thickness‐per‐ply increases failure strain from 0.8% to 1.2%. Explored the performance of a novel ATSP matrix with high recyclability and thermal stability.

Kushwaha, Shashank [The Grainger College of Engine↗

Synthesis and Evaluation of 3-Picrylamino-1,2,4-Triazole (PATO) Formulations

3–Picrylamino–1,2,4–triazole (PATO) is a thermally stable explosive invented at Los Alamos National Laboratory (LANL) almost half a century ago. Despite a rapid and high yielding synthesis, performance data for this promising explosive are scant. We prepared material using Coburn's synthesis, and discovered that the particle size distribution and morphology leads to difficulty in pressing formulations to high density. Three formulations were made using glycidyl azide polymer (GAP), FK–800, and Estane 5703/nitroplasticizer (NP) as binders. The maximum pressed density of these formulations was 89 % of theoretical maximum density (TMD). We determined detonation velocity and, for the FK–800 formulation, detonation pressure. Furthermore, the performance of PATO is similar to TATB at equivalent pressed density.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Bulk nanocrystalline Al–Mg–Y alloys with amorphous grain boundary complexions display high strength and compressive plasticity

Although nanocrystalline alloys regularly exhibit high strengths, their use in structural applications often face challenges due to sample size limitations, unstable microstructures, and the limited ability to plastically deform. The incorporation of amorphous grain boundary complexions has been proposed to address these issues, by simultaneously stabilizing nanocrystalline grain structures for scale-up processing and improving alloy toughness. In the present study, the mechanical behavior of bulk nanocrystalline Al–Mg–Y is examined with macroscale compression testing, probing a length scale that is relevant to real-world structural applications. Bulk samples were fabricated via a simple powder metallurgy approach, with different hot-pressing temperatures and durations employed for consolidation in order to investigate microstructural and property evolution. All of the specimens contained primary face-centered cubic Al and secondary Al 4 C 3 and Al 3 Y phases, with the Al 3 Y particles exhibiting two populations of small equiaxed and larger elongated particles. Appreciable plasticity was measured along with high ultimate stresses over 800 MPa due to the presence of amorphous grain boundary complexions. Microstructural characterization of fracture surfaces revealed that the area fraction of dimpled regions increased with longer hot-pressing time. Most importantly, the elongated Al 3 Y particles formed regular cellular patterns with increasing hot-pressing time, delaying shear localization and significantly enhancing plasticity. The hierarchy present in the microstructure of the Al–Mg–Y alloy, from amorphous grain boundary complexions to secondary phases, gives rise to excellent bulk mechanical properties, which are attractive for structural applications.

Bulk nanocrystalline alloy↗

In situ neutron scattering study of nanostructured PbTe-PbS bulk thermoelectric material

Nanostructures play an important role in thermoelectric materials. Their thermal stability, such as phase change and evolution at elevated temperatures, is thus of great interest to the thermoelectric community. In this study, in situ neutron diffraction was used to examine the phase evolution of nanostructured bulk PbTe-PbS materials fabricated using hot pressing and pulsed electrical current sintering (PECS). The PbS second phase was observed in all samples in the as-pressed condition. The temperature dependent lattice parameter and phase composition data show an initial formation of PbS precipitates followed by a redissolution during heating. The redissolution process started around 570 600 K, and completed at approximately 780 K. During cooling, the PECS sample followed a reversible curve while the heating/cooling behavior of the hot pressed sample was irreversible.

high temperature↗

Sinter-Bonding of AISI 316L and 17-4 PH Stainless Steels

The sinter-bonding method was used to produce AISI 316L/17-4 PH components by conventional powder metallurgy technology. The production process consisted of following steps: the powder layering, co-pressing and co-sintering processes. The co-sintering process was carried out at different sintering temperatures (1200, 1250 and 1300 °C), and times (60, 90 and 120 min) in hydrogen atmosphere. The effect of co-pressing and co-sintering conditions on the ability to create a permanent connection between AISI 316L and 17-4 PH stainless steels was investigated. The densification, dimensional change and microstructural evolution of sintered AISI 316L/17-4 PH components were studied. The increase in co-pressing pressure as well as using of the longer time and the higher temperature of co-sintering process contributed to increase in AISI 316L/17-4 PH component density. The dilatometric study as well as dimensional changes measurements revealed an appropriate sintering compatibility for AISI 316L and 17-4PH steels when the sintering process was carried out at the temperature of 1200 °C for time ranging from 60 to 120 min and at 1250 °C for shorter sintering times. The sintering at temperature of 1300 °C (regardless of other manufacturing conditions) led to a significant deviation from the cylindrical shape of samples, as a result of difference of shrinkage of AISI 316L and 17-4 PH steels. Microstructural study indicated that AISI 316L and 17-4 PH steels creates a good diffusion joint (without any cracks and warpage) during the high-temperature sintering process. Nickel diffusion takes place from the AISI 316L to 17-4 PH stainless steel, and copper and molybdenum diffuse in opposite direction of nickel diffusion. It is possible to achieve a solid connection between two materials exhibiting difference in chemical composition by using sinter-bonding and conventional powder metallurgy technology.

36 MATERIALS SCIENCE↗

Progress in development of SiC-based joints resistant to neutron irradiation

This study fills a knowledge gap regarding neutron-irradiation resistance of SiC joints for nuclear applications, by investigating high-dose neutron irradiation effects on the strength of selected joints and low-dose neutron irradiation effects on recently developed joints fabricated by state of the art processing methods. The joining methods used for the high-dose radiation study included pressure-assisted liquid-phase sintering (LPS) of SiC nanopowder, pressureless calcia-alumina glass ceramics joining, and reaction sintering of Ti-Si-C powders with hot-pressing. The joints were neutron-irradiated at 530 °C to 20 displacements per atom (dpa). Other joining methods included low-pressure LPS of cold-pressed SiC green body, pressureless reaction sintered Ti-Si-C powder joint, spark plasma–sintered Ti diffusion bond, and hot-pressed Ti diffusion bond, which were irradiated at ~500 °C to ~2 dpa. There was no notable degradation of torsional strengths of the joints following the high-dose irradiation. The irradiation-induced degradation at low neutron dose was highly dependent on joint type.

36 MATERIALS SCIENCE↗

Effect of forging strain rate and deformation temperature on the mechanical properties of warm-worked 304L stainless steel

Stainless steel 304L forgings were produced with four different types of production forging equipment – hydraulic press, mechanical press, screw press, and high-energy rate forging (HERF). Each machine imparted a different nominal strain rate during the deformation. The final forgings were done at the warm working (low hot working) temperatures of 816 °C, 843°C, and 871°C. The objectives of the study were to characterize and understand the effect of industrial strain rates (i.e. processing equipment), and deformation temperature on the mechanical properties for the final component. Some of the components were produced with an anneal prior to the final forging while others were deformed without the anneal. The results indicate that lower strain rates produced lower strength and higher ductility components, but the lower strain rate processes were more sensitive to deformation temperature variation and resulted in more within-part property variation. The highest strain rate process, HERF, resulted in slightly lower yield strength due to internal heating. Lower processing temperatures increased strength, decreased ductility but decreased within-part property variation. The anneal prior to the final forging produced a decrease in strength, a small increase in ductility, and a small decrease of within-part property variation.

36 MATERIALS SCIENCE↗

Mitigation and Diagnosis of Pin-Hole Formation in Polymer Electrolyte Membrane Fuel Cells

In this work, we implement a calendering technique to flatten stray fibers within the gas diffusion media, thereby mitigating pin-hole formation in the hot-pressed MEAs. We have investigated the influence of calendering on the long-term durability for several types of gas diffusion electrodes (GDEs) using a combined chemical and mechanical accelerated stress test (AST). The calendered MEAs demonstrate an average AST lifetime improvement of 77% relative to the as-fabricated MEAs.

AMR↗