Search NASA⌕ Search

SEARCH · Search NASA

Results for “Plot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Modeling multi-frequency diurnal backscatter from a walnut orchard

The Michigan Microwave Canopy Scattering Model (MIMICS) is used to model scatterometer data that were obtained during the August 1987 EOS (Earth Observing System) synergism study. During this experiment, truck-based scatterometers were used to measure radar backscatter from a walnut orchard in Fresno County, California. Multipolarized L- and X-band data were recorded for orchard plots for which dielectric and evapotranspiration characteristics were monitored. MIMICS is used to model a multiangle data set in which a single orchard plot was observed at varying impedance angles and a series of diurnal measurements in which backscatter from this same plot was measured continuously over several 24-h periods. MIMICS accounts for variations in canopy backscatter driven by changes in canopy state that occur diurnally as well as on longer time scales. L-band backscatter is dependent not only on properties of the vegetation but also on properties of the underlying soil surface. The behavior of the X-band backscatter is dominated by properties of the tree crowns.

Mcdonald, Kyle C.↗
NASA NTRS1992

Seasonal LAI in slash pine estimated with Landsat TM

The leaf area index (LAI, total area of leaves per unit area of ground) of most forest canopies varies throughout the year, yet for logistical reasons it is difficult to estimate anything more detailed than a seasonal maximum LAI. To determine if remotely sensed data can be used to estimate LAI seasonally, field measurements of LAI were compared to normalized difference vegetation index (NDVI) values derived using Lnandsat Thematic Mapper (TM) data, for 16 fertilized and control slash pine plots on 3 dates. Linear relationships existed between NDVI and LAI with R (sup 2) values of 0.35, 0.75, and 0.86 for February 1988, September 1988, and March, 1989, respectively. This is the first reported study in which NDVI is related to forest LAI recorded during the month of sensor overpass. Predictive relationships based on data from eight of the plots were used to estimate the LAI of the other eight plots with a root-mean-square error of 0.74 LAI, which is 15.6 percent of the mean LAI. This demonstrates the potential use of Landsat TM data for studying seasonal dynamics in forest canopies.

Curran, Paul J.↗
NASA NTRS1992

Polar stratospheric cloud processed air and potential vorticity in the Northern Hemisphere lower stratosphere at mid-latitudes during winter

The present study compares small-scale (less than 100 km) features in ER-2 measurements of ClO, O3, H2O, N2O, and NO(y) outside the lower stratospheric Arctic vortex of 1988-1989 with features on potential vorticity maps from ECMWF. The potential vorticity maps are obtained from T106 analyses and forecasts. Some of the plots were truncated to lower resolution (T63 or T42) which smooths out the finer-scale structure. Comparison of these lower resolution plots shows how much detail is lost by excessive smoothing. It is also evident that the forecast plots lose fine-scale structure due to dissipation in the model resulting mainly from horizontal diffusion. It is concluded that blobs of air on the maps at latitudes between the vortex edge and 25 deg N having potential vorticities characteristic of the vortex did indeed originate from the vortex, but that the real atmosphere is more sharply differentiated than the meteorological analyses, implying that the potential vorticity maps underestimate the amount of peeled-off material.

Tuck, A. F.↗
NASA NTRS1992

A stochastic optimal feedforward and feedback control methodology for superagility

A new control design methodology is developed: Stochastic Optimal Feedforward and Feedback Technology (SOFFT). Traditional design techniques optimize a single cost function (which expresses the design objectives) to obtain both the feedforward and feedback control laws. This approach places conflicting demands on the control law such as fast tracking versus noise atttenuation/disturbance rejection. In the SOFFT approach, two cost functions are defined. The feedforward control law is designed to optimize one cost function, the feedback optimizes the other. By separating the design objectives and decoupling the feedforward and feedback design processes, both objectives can be achieved fully. A new measure of command tracking performance, Z-plots, is also developed. By analyzing these plots at off-nominal conditions, the sensitivity or robustness of the system in tracking commands can be predicted. Z-plots provide an important tool for designing robust control systems. The Variable-Gain SOFFT methodology was used to design a flight control system for the F/A-18 aircraft. It is shown that SOFFT can be used to expand the operating regime and provide greater performance (flying/handling qualities) throughout the extended flight regime. This work was performed under the NASA SBIR program. ICS plans to market the software developed as a new module in its commercial CACSD software package: ACET.

Halyo, Nesim↗
NASA NTRS1993

Thermal history effects on electrical relaxation and conductivity for potassium silicate glass with low alkali concentrations

Electrical response measurements from 10 Hz to 100 kHz between 120 and 540 C were made on potassium-silicate glasses with alkali oxide contents of 2, 3, 5 and 10 mol percent. Low alkali content glasses were chosen in order to try to reduce the Coulombic interactions between alkali ions to the point that frozen structural effects from the glass could be observed. Conductivity and electrical relaxation responses for both annealed and quenched glasses of the same composition were compared. Lower DC conductivity (sigma(sub DC)) activation energies were measured for the quenched compared to the annealed glasses. The two glasses with the lowest alkali contents exhibited a non-Arrhenius concave up curvature in the log(sigma(sub DC)) against 1/T plots, which decreased upon quenching. A sharp decrease in sigma(sub DC) was observed for glasses containing K2O concentrations of 5 mol percent or less. The log modulus loss peak (M'') maximum frequency plots against 1/T all showed Arrhenius behavior for both annealed and quenched samples. The activation energies for these plots closely agreed with the sigma(sub DC) activation energies. A sharp increase in activation energy was observed for both series as the potassium oxide concentration decreased. Changes in the electrical response are attributed to structural effects due to different alkali concentrations. Differences between the annealed and quenched response are linked to a change in the distribution of activation energies (DAE).

Angel, Paul W.↗
NASA NTRS1993

Long term trending of engineering data for the Hubble Space Telescope

A major goal in spacecraft engineering analysis is the detection of component failures before the fact. Trending is the process of monitoring subsystem states to discern unusual behaviors. This involves reducing vast amounts of data about a component or subsystem into a form that helps humans discern underlying patterns and correlations. A long term trending system has been developed for the Hubble Space Telescope. Besides processing the data for 988 distinct telemetry measurements each day, it produces plots of 477 important parameters for the entire 24 hours. Daily updates to the trend files also produce 339 thirty day trend plots each month. The total system combines command procedures to control the execution of the C-based data processing program, user-written FORTRAN routines, and commercial off-the-shelf plotting software. This paper includes a discussion the performance of the trending system and of its limitations.

Cox, Ross M.↗
NASA NTRS1994

PATRAN 2.5/EAL interface guide

The PATRAN/EA interface guide describes two programs, EALPAT and PATEAL. EALPAT reads an EAL LO1 file and translates the model and results into a PATRAN 2.5 neutral file, element results file, and nodal results file. An EAL model can be color coded in PATRAN, and geometry, loads, boundary conditions, section and material properties, rigid masses, springs, and beam orientations can be plotted and debugged. EAL results can be brought into PATRAN as element or nodal quantities and displayed as deformed plots, animated shapes, color coded elements, or color filled contour plots. PATEAL converts a PATRAN 2.5 data base into an EAL runstream. Geometry, including all element types, alternate coordinate systems, material properties, section properties, loads and boundary conditions are all converted. EALPAT and PATEAL can also be used together with the PATNAS translator from PDA Engineering to convert an EAL runstream to an MSC/NASTRAN bulk data file.

Feldhaus, Winifred S.↗
NASA NTRS1994

Absolute calibration technique for broadband ultrasonic transducers

Calibrating an ultrasonic transducer can be performed with a reduced number of calculations and testing. A wide-band pulser is connected to an ultrasonic transducer under test to generate ultrasonic waves in a liquid. A single frequency is transmitted to the electrostatic acoustic transducer (ESAT) and the voltage change produced is monitored. Then a broadband ultrasonic pulse is generated by the ultrasonic transducer and received by the ESAT. The output of the ESAT is amplified and input to a digitized oscilloscope for fast Fourier transform. The resulting plot is normalized with the monitored signal from the single frequency pulse. The plot is then corrected for characteristics of the membrane and diffraction effects. The transfer function of the final plot is determined. The transfer function gives the final sensitivity of the ultrasonic transducer as a function of frequency. The advantage of the system is the speed of calibrating the transducer by a reduced number of measurements and removal of the membrane and diffraction effects.

Yost, William T.↗
NASA NTRS1993

A critical evaluation of theories for predicting microcracking in composite laminates

We present experimental results on 21 different layups of Hercules AS4 carbon fiber/3501-6 epoxy laminates. All laminates had 90 deg plies; some had them in the middle, while some had them on a free surface. During tensile loading, the first form of damage in all laminates was microcracking of the 90 deg plies. For each laminate, we recorded both the crack density and the complete distribution of crack spacings as a function of the applied load. By rearranging various microcracking theories, we developed a master-curve approach that permitted plotting the results from all laminates on a single plot. By comparing master-curve plots for different theories, it was possible to critically evaluate the quality of those theories. We found that a critical-energy-release-rate criterion calculated using a 2D variational stress analysis gave the best results. All microcracking theories based on a strength-failure criteria gave poor results. All microcracking theories using 1D stress analyses, regardless of the failure criterion, also gave poor results.

Nairn, John A.↗
NASA NTRS1994

Windshear certification data base for forward-look detection systems

Described is an introduction to a comprehensive database that is to be used for certification testing of airborne forward-look windshear detection systems. The database was developed by NASA Langley Research Center, at the request of the Federal Aviation Administration (FAA), to support the industry initiative to certify and produce forward-looking windshear detection equipment. The database contains high-resolution three-dimensional fields for meteorological variables that may be sensed by forward-looking systems. The database is made up of seven case studies that are generated by the Terminal Area Simulation System, a state-of-the-art numerical system for the realistic modeling of windshear phenomena. The selected cases contained in the certification documentation represent a wide spectrum of windshear events. The database will be used with vendor-developed sensor simulation software and vendor-collected ground-clutter data to demonstrate detection performance in a variety of meteorological conditions using NASA/FAA pre-defined path scenarios for each of the certification cases. A brief outline of the contents and sample plots from the database documentation are included. These plots show fields of hazard factor, or F-factor (Bowles 1990), radar reflectivity, and velocity vectors on a horizontal plane overlayed with the applicable certification paths. For the plot of the F-factor field the region of 0.105 and above signify an area of hazardous, performance decreasing windshear, while negative values indicate regions of performance increasing windshear. The values of F-factor are based on 1-Km averaged segments along horizontal flight paths, assuming an air speed of 150 knots (approx. 75 m/s). The database has been released to vendors participating in the certification process. The database and associated document have been transferred to the FAA for archival storage and distribution.

Switzer, George F.↗
NASA NTRS1994

Equatorial Kelvin waves: A UARS MLS view

Data from the Microwave Limb Sounder (MLS) instrument on the Upper Atmosphere Research Satellite (UARS) are used to compare two periods of Kelvin wave activity during different stages of the equatorial quasi-biennial oscillation. The analysis is carried out using an asynoptic mapping technique. A wide bandpass filter is used to isolate the frequency bands where Kelvin waves have been identified in previous studies. Time-height and time-latitude plots of the bandpassed data are used to identify Kelvin wave activity in the temperature and ozone fields. Frequency spectra of temperature and ozone amplitudes are constructed to further analyze the latitudinal and meridional distribution of Kelvin wave activity in zonal wavenumbers 1 and 2. The characteristics identified in these plots agree well with theoretical predictions and previous observations of middle atmosphere Kelvin waves. The time-height and time-latitude plots support the existence of Kelvin waves in discrete frequency bands; the slow, fast, and ultrafast Kelvin modes are all identified in the data. The characteristics of these modes do not vary much despite different mean flow conditions in the two periods examined. For the Kelvin wave-induced perturbations in ozone, the change from a transport-dominated regime below 10 hPa to a photochemically controlled regime above 10 hPa is clearly apparent in the height dependence of the phase difference between temperature and ozone. The ratios of the ozone perturbation amplitude to the temperature perturbation amplitude for the various observed Kelvin wave modes are in agreement with model estimates and LIMS (Limb Infrared Monitor of the Stratosphere) observations in the lower half of the region sampled but appear to be too large in the upper stratosphere and lower mesosphere.

Canziani, Pablo O.↗
NASA NTRS1995

A remotely sensed index of deforestation/urbanization for use in climate models

The object of this research is to use indirect measurements, notably thermal infrared, to describe urbanization and deforestation with parameters that can be used to assess, as well as predict, the effects of land use changes on local microclimate. More specifically, we use a new approach for the treatment of remotely sensed data; this is referred to as the 'triangle' method. The name triangle is given because the envelope of data points, when plotted as a function of surface radiant temperature versus vegetation index or fractional vegetation cover, exhibits the shape of a triangle. From the information contained on these 'scatter plots', land use changes can be related to two intrinsic surface variables, the surface moisture availability (M(sub 0))(sup 1) and fractional vegetation cover. Recent work by Carlson et al. indicate that the triangle shape on the scatter plots may be scale similar, suggesting that these two parameters are subject to the same interpretation on differing scales. A second objective in this research is to determine if historical data for Advanced Very High Resolution Radiometer (AVHRR) (NOAA satellite; 1.1 km resolution at nadir) can be used to assess changes in regional land use over time. To this end, two target areas were chosen for the investigation of urbanization and two for deforestation. The former comprise tow areas in Pennsylvania, one a small but rapidly growing population center (State College) and the other a medium-sized urban area which continues to undergo development (Chester County). The two deforestation sites consist of rain forest areas in western and central Costa Rica and a region in the Brazilian Amazon.

Gillies, Robert R.↗
NASA NTRS1995

Visualization of International Solar-Terrestrial Physics Program (ISTP) data

The International Solar-Terrestrial Physics Program (ISTP) is a multispacecraft, multinational program whose objective is to promote further understanding of the Earth's complex plasma environment. Extensive data sharing and data analysis will be needed to ensure the success of the overall ISTP program. For this reason, there has been a special emphasis on data standards throughout ISTP. One of the key tools will be the common data format (CDF), developed, maintained, and evolved at the National Space Science Data Center (NSSDC), with the set of ISTP implementation guidelines specially designed for space physics data sets by the Space Physics Data Facility (associated with the NSSDC). The ISTP guidelines were developed to facilitate searching, plotting, merging, and subsetting of data sets. We focus here on the plotting application. A prototype software package was developed to plot key parameter (KP) data from the ISTP program at the Science Planning and Operations Facility (SPOF). The ISTP Key Parameter Visualization Tool is based on the Interactive Data Language (IDL) and is keyed to the ISTP guidelines, reading data stored in CDF. With the combination of CDF, the ISTP guidelines, and the visualization software, we can look forward to easier and more effective data sharing and use among ISTP scientists.

Kessel, Ramona L.↗
NASA NTRS1997

Time/Temperature Dependent Tensile Strength of SiC and Al2O3-Based Fibers

In order to understand and model the thermomechanical behavior of fiber-reinforced composites, stress-rupture, fast-fracture, and warm-up rupture studies were conducted on various advanced SiC and Al2O3-based fibers in the,temperature range from 20 to 1400 C in air as well as in inert environments. The measured stress-rupture, fast fracture, and warm-up rupture strengths were correlated into a single master time/temperature-dependent strength plot for each fiber type using thermal activation and slow crack growth theories. It is shown that these plots are useful for comparing and selecting fibers for CMC and MMC reinforcement and that, in comparison to stress rupture tests, the fast-fracture and warm-up tests can be used for rapid generation of these plots.

Yun, Hee Mann↗
NASA NTRS1997

Preliminary Findings of the Photovoltaic Cell Calibration Experiment on Pathfinder Flight 95-3

The objective of the photovoltaic (PV) cell calibration experiment for Pathfinder was to develop an experiment compatible with an ultralight UAV to predict the performance of PV cells at AM0, the solar spectrum in space, using the Langley plot technique. The Langley plot is a valuable technique for this purpose and requires accurate measurements of air mass (pressure), cell temperature, solar irradiance, and current-voltage(IV) characteristics with the cells directed normal to the direct ray of the sun. Pathfinder's mission objective (95-3) of 65,000 ft. maximum altitude, is ideal for performing the Langley plot measurements. Miniaturization of electronic data acquisition equipment enabled the design and construction of an accurate and light weight measurement system that meets Pathfinder's low payload weight requirements.

Vargas-Aburto, Carlos↗
NASA NTRS1997

Restoration and Archiving of Data from the Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE 1)

The objective of this project has been to complete the archiving of energetic (10 eV/epsilon - 18 keV/epsilon) ion composition data from the Lockheed Plasma Composition Experiment on the International Sun-Earth Explorer One (ISEE 1) satellite, using a particular data format that had previously been approved by NASA and the NSSDC. That same format, a combination of ion velocity moments and differential flux spectra, had been used in 1991 to archive, at the NSSDC, the first 28 months (the "Prime" period of ISEE investigations) of data from the Lockheed instrument under NASA Contract NAS5-33047. With the completion of this project, the almost 4 1/2-year time span of these unique data is now covered by a very compact set, approximately 1 gigabyte in total, of electronic files with physical quantities, all in ASCII. The files are organized by data type and time of data acquisition, in Universal Time, and named according to year and day of year. Each calendar day has five separate files (five types of data), the lengths of which vary from day to day, depending on the instrument mode of operation. The data format and file structure are described in detail in appendices 1 and 2. The physical medium consists of high-density (6250 cpi) 9-track magnetic tapes, complemented by a set of hardcopy line plots of certain plasma parameters. In this case there are five tapes, to be added to the six previous ones from 1991, and 25 booklets of plots, one per month, to be added to the previous 28. The tapes, including an extra standard-density (1600 cpi) tape with electronic versions of the Data User's Guide and self-guiding VAX/VMS command files, and the hardcopy plots are being boxed for shipment to the NSSDC.

Lennartsson, O. W.↗
NASA NTRS1997

Development of Software to Model AXAF-I Image Quality

This report describes work conducted on Delivery Order 181 between October 1996 through June 1997. During this period software was written to: compute axial PSD's from RDOS AXAF-I mirror surface maps; plot axial surface errors and compute PSD's from HDOS "Big 8" axial scans; plot PSD's from FITS format PSD files; plot band-limited RMS vs axial and azimuthal position for multiple PSD files; combine and organize PSD's from multiple mirror surface measurements formatted as input to GRAZTRACE; modify GRAZTRACE to read FITS formatted PSD files; evaluate AXAF-I test results; improve and expand the capabilities of the GT x-ray mirror analysis package. During this period work began on a more user-friendly manual for the GT program, and improvements were made to the on-line help manual.

Geary, Joseph↗
NASA NTRS1998

Implementation and Testing of Turbulence Models for the F18-HARV Simulation

This report presents three methods of implementing the Dryden power spectral density model for atmospheric turbulence. Included are the equations which define the three methods and computer source code written in Advanced Continuous Simulation Language to implement the equations. Time-history plots and sample statistics of simulated turbulence results from executing the code in a test program are also presented. Power spectral densities were computed for sample sequences of turbulence and are plotted for comparison with the Dryden spectra. The three model implementations were installed in a nonlinear six-degree-of-freedom simulation of the High Alpha Research Vehicle airplane. Aircraft simulation responses to turbulence generated with the three implementations are presented as plots.

Yeager, Jessie C.↗