Search NASA⌕ Search

SEARCH · Search NASA

Results for “Science activities”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Crystallization of niobium germanosilicate glasses

Niobium germanosilicate glasses are potential candidates for the fabrication of transparent glass ceramics with interesting non-linear optical properties. A series of glasses in the (Ge,Si)O{sub 2}-Nb{sub 2}O{sub 5}-K{sub 2}O system were prepared by melting and casting and their characteristic temperatures were determined by differential thermal analysis. Progressive replacement of GeO{sub 2} by SiO{sub 2} improved the thermal stability of the glasses. Depending on the composition and the crystallization heat-treatment, different nanocrystalline phases-KNbSi{sub 2}O{sub 7}, K{sub 3}Nb{sub 3}Si{sub 2}O{sub 13} and K{sub 3.8}Nb{sub 5}Ge{sub 3}O{sub 20.4} could be obtained. The identification and characterization of these phases were performed by X-ray diffraction and Raman spectroscopy. The 40 GeO{sub 2}-10 SiO{sub 2}-25 Nb{sub 2}O{sub 5}-25 K{sub 2}O (mol%) composition presented the higher ability for volume crystallization and its nucleation temperature was determined by the Marotta's method. An activation energy for crystal growth of {approx}529 kJ/mol and a nucleation rate of 9.7x10{sup 18} m{sup -3} s{sup -1} was obtained, for this composition. Transparent glass ceramics with a crystalline volume fraction of {approx}57% were obtained after a 2 h heat-treatment at the nucleation temperature, with crystallite sizes of {approx}20 nm as determined by transmission electron microscopy. - Abstract: TEM image and XRD pattern of the glass ceramic produced (circles indicate nanocrystals).

36 MATERIALS SCIENCE↗

Generation kinetics of boron-oxygen complexes in p-type compensated c-Si

Kinetics characteristics of boron-oxygen complexes responsible for light-induced degradation in p-type compensated c-Si have been investigated. The generation of B-O complexes is well fitted by a fast-forming process and a slow-forming one. Activation energies of complexes generation during the fast-forming process are determined to be 0.29 and 0.24 eV in compensated and non-compensated c-Si, respectively, and those during the slow-forming process are the same, about 0.44 eV. Moreover, it is found that the pre-exponential factors of complexes generation in compensated c-Si is proportional to the square of the net doping concentration, which suggests that the latent centers should exist.

36 MATERIALS SCIENCE↗

Electron Effective Mass and g Factor in Wide HgTe Quantum Wells

The magnetic-field (0 T < B < 9 T) dependence of the longitudinal and Hall resistances at fixed temperatures (2 K < T < 50 K) for the HgCdTe/HgTe/HgCdTe system with a HgTe quantum well 20.3 nm in width are measured. The activation analysis of the magnetoresistance curves is used as a tool for identifying the mobility gaps between neighboring Landau levels. The activation-energy values obtained from the temperature dependences of the longitudinal resistance in the plateau regions of the quantum Hall effect with the filling factors ν = 1, 2, 3 make it possible to estimate the effective mass and the g factor of electrons in the system under study. Indications concerning the possibility of large values of the g factor (≅ 80) are obtained.

36 MATERIALS SCIENCE↗

Dimensional and chemical characterization of particles at a downwind receptor site of a waste-to-energy plant

In the last years numerous epidemiological studies were carried out to evaluate the effects of particulate matter on human health. In industrialized areas, anthropogenic activities highly contribute to the fine and ultrafine particle concentrations. Then, it is important to characterize the evolution of particle size distribution and chemical composition near these emission points. Waste incineration represents a favorable technique for reducing the waste volume. However, in the past, municipal waste incinerators (MWIs) had a bad reputation due to the emission of toxic combustion byproducts. Consequently, the risk perception of the people living near MWIs is very high even if in Western countries waste incineration has nowadays to be considered a relatively clean process from a technical point of view. The study here presented has an exemplary meaning for developing appropriate management and control strategies for air quality in the surrounding of MWIs and to perform exposure assessment for populations involved. Environment particles were continuously measured through a SMPS/APS system over 12 months. The monitoring site represents a downwind receptor of a typical MWI. Furthermore, elements and organic fractions were measured by means of the Instrumental Neutron Activation Analysis and using dichotomous and high volume samplers. Annual mean values of 8.6 x 10{sup 3} +- 3.7 x 10{sup 2} part. cm{sup -3} and 31.1 +- 9.0 mug m{sup -3} were found for number and mass concentration, typical of a rural site. Most of the elements can be attributed to long-range transport from other natural and/or anthropogenic sources. Finally, the Polycyclic Aromatic Hydrocarbons present low concentrations with a mean value of 24.6 ng m{sup -3}.

54 ENVIRONMENTAL SCIENCES↗

Molecular Genetic Analysis of Activation-Tagged Transcription Factors Thought to be Involved in Photomorphogenesis

This is a final report for Department of Energy Grant No. DE-FG02-08ER15927 entitled “Molecular Genetic Analysis of Activation-Tagged Transcription Factors Thought to be Involved in Photomorphogenesis”. Based on our preliminary photobiological and genetic analysis of the sob1-D mutant, we hypothesized that OBP3 is a transcription factor involved in both phytochrome and cryptochrome-mediated signal transduction. In addition, we hypothesized that OBP3 is involved in auxin signaling and root development. Based on our preliminary photobiological and genetic analysis of the sob2-D mutant, we also hypothesized that a related gene, LEP, is involved in hormone signaling and seedling development.

59 BASIC BIOLOGICAL SCIENCES↗

Shallow Cumulus (SHALLOWCUMULUS) Value-Added Product Report

Periods of shallow cumulus clouds are identified automatically at the U.S. Department of Energy (DOE) Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) observatory in order to help determine times of interest for Large-Eddy Simulation (LES) and Observation (LASSO) modeling efforts. This value-added data product (VAP) uses input from the Cloud Type (CLDTYPE) VAP (with cloud types determined from Active Remotely Sensed Cloud Locations [ARSCL] VAP cloud boundaries), the ceilometer, and the total sky imager (TSI). The data set uses an hourly temporal resolution and only classifies events as shallow cumulus when low clouds are detected for at least 1.5 hours and meet specified criteria for cloud occurrence and cloud fraction. In addition to time periods that contain just shallow cumulus, cases with overlying cirrus and a number of transitional cases (transitions to/from cirrus, stratus, and altocumulus/altostratus) are also identified.

54 ENVIRONMENTAL SCIENCES↗

Formation of an 18R long-period stacking ordered structure in rapidly solidified Mg{sub 88}Y{sub 8}Zn{sub 4} alloy

The formation of the long-period stacking ordered structure (LPSO) in a Mg{sub 88}Y{sub 8}Zn{sub 4}(at%) ribbon produced by melt spinning was studied using high energy X-ray synchrotron radiation diffraction during in-situ isochronal heating and transmission electron microscopy. The microstructure of the rapidly solidified ribbons is characterised by fine magnesium grains with yttrium and zinc in solid solution and primary 18R LPSO-phase segregated at grain boundaries. Using differential scanning calorimetry, a strong exothermal peak was observed around 300 °C which was associated with the development of the 18R-type LPSO-phase in the magnesium grains. The apparent activation energy calculated using the Kissinger model was 125 KJmol{sup −1} and it is related to simultaneous diffusion of Y and Zn through magnesium basal plane. - Highlights: •The formation of the LPSO phase in rapidly solidified ribbons was studied. •The formation of the 18R LPSO starts at around 300 °C. •LPSO formation have to steps: Stacking faults along basal plane and then growth of 18R structure along the c direction.

36 MATERIALS SCIENCE↗

Correlation between relaxations and plastic deformation, and elastic model of flow in metallic glasses and glass-forming liquids

We study the similarity and correlations between relaxations and plastic deformation in metallic glasses (MGs) and MG-forming liquids. It is shown that the microscope plastic events, the initiation and formation of shear bands, and the mechanical yield in MGs where the atomic sites are topologically unstable induced by applied stress, can be treated as the glass to supercooled liquid state transition induced by external shear stress. On the other hand, the glass transition, the primary and secondary relaxations, plastic deformation and yield can be attributed to the free volume increase induced flow, and the flow can be modeled as the activated hopping between the inherent states in the potential energy landscape. We then propose an extended elastic model to describe the flow based on the energy landscape theory. That is, the flow activation energy density is linear proportional to the instantaneous elastic moduli, and the activation energy density {rho}{sub E} is determined to be a simple expression of {rho}{sub E}=(10/11)G+(1/11)K. The model indicates that both shear and bulk moduli are critical parameters accounting for both the homogeneous and inhomogeneous flows in MGs and MG-forming liquids. The elastic model is experimentally certified. We show that the elastic perspectives offers a simple scenario for the flow in MGs and MG-forming liquids and are suggestive for understanding the glass transition, plastic deformation, and nature and characteristics of MGs.

36 MATERIALS SCIENCE↗

Electron levels and luminescence of dislocation networks formed by the hydrophilic bonding of silicon wafers

Local energy levels produced by dislocations at the interface between bonded n- and p-Si wafers are studied by deep level transient spectroscopy and by a new technique for the detection of impurity luminescence, induced by the occupation of electron states upon the application of electric pulses (the pulsed trap-refilling-enhanced luminescence technique). It is established that only the shallow levels of the dislocation network, with activation energies of about 0.1 eV, are responsible for the D1 dislocation-related luminescence band in both n- and p-type samples. The occupation of deep levels has no effect on the D1-band intensity. A model of coupled neutral trapping centers for charge carriers is proposed. In this model, the difference between the energy position of the D1 band (0.8 eV) and the corresponding interlevel energy spacing (0.97 eV) is attributed to the Coulomb interaction between charge carriers trapped at the levels.

36 MATERIALS SCIENCE↗

DISCOVR strain pipeline screening – Part I: Maximum specific growth rate as a function of temperature and salinity for 38 candidate microalgae for biofuels production

Here, to identify high productivity strains for microalgal biofuels generation, the maximum specific growth rate of 38 strains was measured as a function of salinity (i.e., 5, 15, and 35 PSU) and temperature (i.e., at 8 temperatures along a linear gradient from ca. 5 to 45°C) to determine the most suitable growth medium salinity and best growing season, respectively, for outdoor raceway pond cultivation. The following strains were evaluated: Agmenellum quadruplicatum UTEX 2268, Anabaena sp. ATCC 33081, Arthrospira fusiformis UTEX 2721, Arthrospira platensis UTEX 3086, Chlorella vulgaris NREL 4-C12, Chlorella autotrophica CCMP 243, Chlorella sorokiniana DOE1044, Chlorella sorokiniana DOE 1116, Chlorella sorokiniana DOE 1412 (UTEXB3016), Chlorella vulgaris LRB AZ-1201, Chlorococcum littorale UTEX 117, Chlorococcum sp. UTEX-B P7, Chloromonas reticulata CCALA 870, Coelastrella sp. DOE 0202, Cyanobacterium sp. AB1, Micractinium reisseri NREL 14-F2, Microchloropsis gaditana CCMP1894, Microchloropsis salina CCMP 1776, Monoraphidium sp. MONOR1, Monoraphidium minutum 26B-AM, Nannochloropsis oceanica CCAP 849/10, Oscillatoria cf. priestleyi CCMEE 5020.1-1, Picochlorum celeri TG2-WT-CSM/EMRE, Picochlorum oklahomensis CCMP 2329, Picochlorum renovo NREL 39-A8, Picochlorum soloecismus DOE 101, Porphyridium cruentum CCMP 675, Scenedesmus acutus LRB-AP-0401, Scenedesmus obliquus DOE 0152.z, Scenedesmus obliquus UTEX393,Scenedesmus rubescens NREL 46B-D3, Scenedesmus sp. IITRIND2, Stichococcus minor CCMP 819, Stichococcus minutus CCALA 727, Synechococcus elongatus UTEX2973.1, Tetraselmis striata LANL 1001, Tisochrysis lutea CCMP 1324, and Tribonema minus UTEXB3156. For each strain, the identity and the presence of bacterial cohorts was determined using 18S and 16S rDNA sequencing, respectively. The maximum specific growth rate versus temperature data were also used to determine the activation energies (Arrhenius equation) for most strains. For all strains, the measured salinity and temperature tolerance data were compared to those reported in the literature. The fastest growing strains were down-selected for subsequent biomass productivity measurements in climate-simulation photobioreactors, as reported in the next paper in the issue.

18S and 16S rDNA sequencing↗

Structural study and physical properties of a new phosphate KCuFe(PO{sub 4}){sub 2}

Single crystals of a new phosphate KCuFe(PO{sub 4}){sub 2} have been prepared by the flux method and its structural and physical properties have been investigated. This compound crystallizes in the monoclinic system with the space group P2{sub 1}/n and its parameters are: a=7.958(3) A, b=9.931(2) A, c=9.039(2) A, {beta}=115.59(3){sup o} and Z=4. Its structure consists of FeO{sub 6} octahedra sharing corners with Cu{sub 2}O{sub 8} units of edge-sharing CuO{sub 5} polyhedra to form undulating chains extending infinitely along the b-axis. These chains are connected by the phosphate tetrahedra giving rise to a 3D framework with six-sided tunnels parallel to the [101] direction, where the K{sup +} ions are located. The Moessbauer spectroscopy results confirm the exclusive presence of octahedral Fe{sup 3+} ions. The magnetic measurements show the compound to be antiferromagnetic with C{sub m}=5.71 emu K/mol and {theta}=-156.5 K. The derived experimental effective moment {mu}{sub ex}=6.76{mu}{sub B} is somewhat higher than the theoretical one of {mu}{sub th}=6.16{mu}{sub B}, calculated taking only into account the spin contribution for Fe{sup 3+} and Cu{sup 2+} cations. Electrical measurements allow us to obtain the activation energy (1.22 eV) and the conductivity measurements suggest that the charge carriers through the structure are the potassium cations. -- Graphical abstract: A projection along the [101] direction of the structure showing the six-edged tunnels, occupied by the K{sup +} ions. Display Omitted Highlights: {yields} The reported structure is of a new type. {yields} The structural model is supported by a Moessbauer spectroscopy study. {yields} The magnetic susceptibility results are reported. {yields} The electrical properties are discussed.

36 MATERIALS SCIENCE↗

Analysis of defects in GaAsN grown by chemical beam epitaxy on high index GaAs substrates

The lattice defects in GaAsN grown by chemical beam epitaxy on GaAs 311B and GaAs 10A toward [110] were characterized and discussed by using deep level transient spectroscopy (DLTS) and on the basis of temperature dependence of the junction capacitances (C{sub J}). In one hand, GaAsN films grown on GaAs 311B and GaAs 10A showed n-type and p-type conductivities, respectively although the similar and simultaneous growth conditions. This result is indeed in contrast to the common known effect of N concentration on the type of conductivity, since the surface 311B showed a significant improvement in the incorporation of N. Furthermore, the temperature dependence of C{sub J} has shown that GaAs 311B limits the formation of N-H defects. In the other hand, the energy states in the forbidden gap of GaAsN were obtained. Six electron traps, E1 to E6, were observed in the DLTS spectrum of GaAsN grown on GaAs 311B, with apparent activation energies of 0.02, 0.14, 0.16, 0.33, 0.48, and 0.74 eV below the bottom edge of the conduction band, respectively. In addition, four hole traps, H1 to H4, were observed in the DLTS spectrum of GaAsN grown on GaAs 10A, with energy depths of 0.13, 0.20, 0.39, and 0.52 eV above the valence band maximum of the alloy, respectively. Hence, the surface morphology of the GaAs substrate was found to play a key factor role in clarifying the electrical properties of GaAsN grown by CBE.

36 MATERIALS SCIENCE↗

Temperature dependent electrical transport characteristics of BaTiO{sub 3} modified lithium borate glasses

The glass samples with composition (70B{sub 2}O{sub 3}-29Li{sub 2}O-1Dy{sub 2}O{sub 3})-xBT; x = 0, 10 and 20 weight percent, have been prepared by conventional melt quench technique. The dielectric measurements as a function of temperature have been carried out on these samples in the frequency range 1 Hz-10 MHz. The dielectric relaxation characteristics of these samples have been studied by analyzing dielectric spectroscopy, dielectric loss, electric modulus formulation and electrical conductivity spectroscopy. It is found that the dielectric permittivity of the samples increases with an increase in the temperature and BT content. The frequency dependent ac conductivity has been analyzed using Jonscher’s universal power law whereas non exponential KWW function has been invoked to fit the experimental data of the imaginary part of the electric modulus. The values of the activation energy determined from the electric modulus and that from dc conductivity have been found to be quite close to each other suggesting that the same type of charge barriers are involved in the relaxation and the conduction mechanisms. The stretched exponent (β) and the power exponent (n) have been found to be temperature and composition dependent. The decrease in n with an increase in temperature further suggested that the ac conduction mechanism of the studied samples follows the correlated barrier hopping (CBH) model.

36 MATERIALS SCIENCE↗

Solid state reaction synthesis and photoluminescence properties of Dy{sup 3+} doped Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12} phosphor

Highlights: • Ca{sub 3−x}Sc{sub 2}Si{sub 3}O{sub 12}:xDy{sup 3+} (0.01 ≤ x ≤ 0.03) was successfully synthesized under a reducing atmosphere. • The thermal stability of the Ca{sub 2.975}Sc{sub 2}Si{sub 3}O{sub 12}:0.025Dy{sup 3+} is superior to commercial phosphors in theory and experiment. • The optimal chromaticity coordinates of Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} is (x = 0.3425, y = 0.3343) upon 350 nm excitation. - Abstract: The white emission phosphor Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} was synthesized by the solid-state reaction. Phase analysis and characteristic luminescence properties are investigated by X-ray diffraction and photoluminescence spectra measurement. Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} phosphor shows strong absorption in 350–410 nm region and exhibits white emission with CIE chromaticity coordinates of (0.3425, 0.3343). Its emission intensity at 250 °C remained 74% of that measured at room temperature. Moreover, the activation energy is also calculated through the Arrhenius equation. The result shows that the thermostability of Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} is superior than that of commercial phosphor Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Ce{sup 3+}. The outstanding luminescent properties indicate that Ca{sub 3}Sc{sub 2}Si{sub 3}O{sub 12}:Dy{sup 3+} could be a potential white light emission phosphor.

36 MATERIALS SCIENCE↗

Effect of phase separation induced supercooling on magnetotransport properties of epitaxial La{sub 5/8−y}Pr{sub y}Ca{sub 3/8}MnO{sub 3} (y≈0.4) thin film

Thin films of La{sub 5/8−y}Pr{sub y}Ca{sub 3/8}MnO{sub 3} (y≈0.4) have been grown on single crystal SrTiO{sub 3} (001) by RF sputtering. The structural and surface characterizations confirm the epitaxial nature of these film. However, the difference between the ω-scan of the (002) and (110) peaks and the presence of pits/holes in the step-terrace type surface morphology suggests high density of defect in these films. Pronounced hysteresis between the field cooled cooling (FCC) and field cooled warming (FCW) magnetization measurements suggest towards the non-ergodic magnetic state. The origin of this nonergodicity could be traced to the magnetic liquid like state arising from the delicacy of the coexisting magnetic phases, viz., ferromagnetic and antiferromagnetic-charge ordered (FM/AFM-CO). The large difference between the insulator metal transitions during cooling and warming cycles (T{sub IM}{sup C} ∼ 64 K and T{sub IM}{sup W} ∼ 123 K) could be regarded as a manifestation of the nonergodicity leading to supercooling of the magnetic liquid while cooling. The nonergodicity and supercooling are weakened by the AFM-FM phase transition induced by an external magnetic field. T{sub IM} and small polaron activation energy corresponding the magnetic liquid state (cooling cycle) vary nonlinearly with the applied magnetic field but become linear in the crystalline solid state (warming cycle). The analysis of the low temperature resistivity data shows that electron-phonon interaction is drastically reduced by the applied magnetic field. The resistivity minimum in the lower temperature region of the self-field warming curve has been explained in terms of the Kondo like scattering in the magnetically inhomogeneous regime.

36 MATERIALS SCIENCE↗

Influence of Temperature on Reaction Mechanism of Ilmenite Ore Smelting for Titanium Production

The carbothermic smelting reduction process of ilmenite ore at high temperature was investigated by thermodynamic calculations in conjunction with smelting experiments. Based on thermodynamic calculations, conducting the smelting process at a higher temperature was recommended to achieve a larger amount of FeO reduction, i.e., higher Ti-enrichment, as less precipitate and thus large amounts of a liquid slag were predicted. However, even though the reduction of FeO in ilmenite ore at the initial stage seemed to be faster as the temperature increased, no significant difference in the TiO{sub 2} or FeO concentration was observed after the reaction was complete, regardless of the temperature. This was caused by the precipitation of pseudobrookite due to the local depletion of FeO during reaction at higher temperatures, by which further reduction reaction was prohibited. The apparent rate constant increased with increasing temperature and the activation energy of the reduction process was estimated to be 144 kJ/mol, from which it was concluded that the reduction reaction of FeO in ilmenite slag by carbonaceous reductant was generally controlled through the mass transfer in the slag phase. Additionally, the formation of TiC also occurred in the iron bath. At 1923 K (1650 °C), approx. 20 pct more TiC was generated as compared to TiC formation at 1823 K (1550 °C), which also prevented further reduction of Fe at higher temperatures.

36 MATERIALS SCIENCE↗

Effect of sulfur content in a sulfur-activated carbon composite on the electrochemical properties of a lithium/sulfur battery

Highlights: • The content of sulfur in activated carbon was controlled by solution process. • The sulfur electrode with low sulfur content shows the best performance. • The Li/S battery has capacity of 1360 mAh/g at 1 C and 702 mAh/g at 10 C. - Abstract: The content of sulfur in sulfur/activated carbon composite is controlled from 32.37 wt.% to 55.33 wt.% by a one-step solution-based process. When the sulfur content is limited to 41.21 wt.%, it can be loaded into the pores of an activated carbon matrix in a highly dispersed state. On the contrary, when the sulfur content is 55.33 wt.%, crystalline sulfur can be detected on the surface of the activated carbon matrix. The best electrochemical performance can be obtained for a sulfur electrode with the lowest sulfur content. The sulfur/activated carbon composite with 32.37 wt.% sulfur afforded the highest first discharge capacity of 1360 mAh g{sup −1} at 1 C rate and a large reversible capacity of 702 mAh g{sup −1} at 10 C (16.75 A/g)

36 MATERIALS SCIENCE↗