Search NASA⌕ Search

SEARCH · Search NASA

Results for “Shells”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Nonlinear Finite Element Analysis of Shells with Large Aspect Ratio

A higher order degenerated shell element with nine nodes was selected for large deformation and post-buckling analysis of thick or thin shells. Elastic-plastic material properties are also included. The post-buckling analysis algorithm is given. Using a square plate, it was demonstrated that the none-node element does not have shear locking effect even if its aspect ratio was increased to the order 10 to the 8th power. Two sample problems are given to illustrate the analysis capability of the shell element.

Chang, T. Y.↗
NASA NTRS1983

The input mobility of an infinite circular cylindrical elastic shell filled with fluid

The force input mobility of an infinite elastic circular cylindrical shell filled with fluid is derived by using the spectral equations of motion. Mobilities are evaluated and their physical interpretations are discussed for a steel shell of thickness h/a = 0.05 filled with water and vibrating in the n = 0, 1 and 2 circumferential modes. The results are subsequently used to analyze the related situations of wave transmission through a radial ring constraint and the far field vibrational energy distributions between the contained fluid and the shell wall for line and point driving forces.

Fuller, C. R.↗
NASA NTRS1984

Atomic inner-shell transitions

Atomic inner-shell processes have quite different characteristics, in several important aspects, from processes in the optical regime. Energies are large, e.g., the 1s binding energy reaches 100 keV at Z = 87; relativistic and quantum-electrodynamic effects therefore are strong. Radiationless transitions vastly dominate over photon emission in most cases. Isolated inner-shell vacancies have pronounced single-particle character, with correlations generally contributing only approximately 1 eV to the 1s and 2p binding energies; the structure of such systems is thus well tractable by independent-particle self-consistent-field atomic models. For systems containing multiple deep inner-shell vacancies, or for highly stripped ions, the importance of relativistic intermediate coupling and configuration interaction becomes pronounced. Cancellation of the Coulomb interaction can lead to strong manifestations of the Breit interaction in such phenomena as multiplet splitting and hypersatellite X-ray shifts. Unique opportunities arise for the test of theory.

Crasemann, B.↗
NASA NTRS1984

Einstein observations of selected close binaries and shell stars

Several evolved close binaries and shell stars were observed with the IPC aboard the HEAO 2 Einstein Observatory. No eclipsing target was detected, and only two of the shell binaries were detected. It is argued that there is no substantial difference in L(X) for eclipsing and non-eclipsing binaries. The close binary and shell star CX Dra was detected as a moderately strong source, and the best interpretation is that the X-ray flux arises primarily from the corona of the cool member of the binary at about the level of Algol-like or RS CVn-type sources. The residual visible-band light curve of this binary has been modeled so as to conform as well as possible with this interpretation. HD 51480 was detected as a weak source. Substantial background information from IUE and ground scanner measurements are given for this binary. The positions and flux values of several accidentally detected sources are given.

Guinan, E. F.↗
NASA NTRS1985

Centrifugal Generator of Filled Spherical Shells

Centrifugal apparatus produces filled spherical shells for wide range of industrial and scientific applications. Rotating container has radially extending nozzle in which centrifugal force draws liquid shell material from container. Liquid shell material fed from outside container and automatically maintained at fixed level. Along axis of nozzle is tube that connects through rotating seal to source of gas or other filler material. Material-flow and rotation rates adjusted to change bubble size.

Wang, T. G.↗
NASA NTRS1985

The effect of source location on the structural-acoustic interaction of an infinite elastic shell

This paper deals with the response of an infinite elastic shell to simple acoustic sources (monopole and dipole). This simplified model is considered in order to gain insight into the characteristics of aircraft interior noise. The shell represents the aircraft fuselage and the sources are due to the propellor. Specifically, in this study the location of the source with respect to the cylinder is the major concern. How this affects acoustic line power, intensity flow into the shell and internal sound pressure is analyzed.

Kelly, J. J.↗
NASA NTRS1985

The Sigma-D relation for shell-like supernova remnants

A large fraction of Galactic supernova remnants, including a dozen shell-like remnants, can be associated with large molecular clouds or cloud complexes with well-determined distances. The Sigma-D relation for these shell-like remnants, derived using distances to the associated molecular clouds, shows substantially smaller scatter than previous relations and establishes a good distance scale for shell-like remnants from Type II events.

Huang, Y.-L.↗
NASA NTRS1985

A pressurized cylindrical shell with a fixed end which contains an axial part-through or through crack

In this paper a cylindrical shell having a very stiff end plate or a flange is considered. It is assumed that near the end the cylinder contains an axial flow which may be modeled as a part-through surface crack or through crack. The primary objective is to study the effect of the end constraining on the stress intensity factor which is the main fracture mechanics parameter. The applied loads acting on the cylinder are assumed to be axisymmetric. Thus the crack problem under consideration is symmetric with respect to the plane of the crack and consequently only the mode I stress intensity factors are nonzero. With this limitation, the general perturbation problem for a cylinder with a built-in end containing an axial crack is considered. Reissner's shell theory is used to formulate the problem. The part-through crack problem is treated by using a line-spring model. In the case of a crack tip terminating at the fixed end it is shown that the integral equation of the shell problem has the same generalized Cauchy kernel as the corresponding plane stress elasticity problem. Even though the problem is formulated for a general surface crack profile and arbitrary crack surface tractions, the numerical results are obtained only for a semielliptic part-through axial crack located at the inside or outside surface of the cylinder and for internal pressure acting on the cylinder. The stress intensity factors are calculated and presented for a relatively wide range of dimensionless length parameters of the problem.

Yahsi, O. S.↗
NASA NTRS1986

The crack problem in a reinforced cylindrical shell

In this paper a partially reinforced cylinder containing an axial through crack is considered. The reinforcement is assumed to be fully bonded to the main cylinder. The composite cylinder is thus modelled by a nonhomogeneous shell having a step change in the elastic properties at the z=0 plane, z being the axial coordinate. Using a Reissner type transverse shear theory the problem is reduced to a pair of singular integral equations. In the special case of a crack tip touching the bimaterial interface it is shown that the dominant parts of the kernels of the integral equations associated with both membrane loading and bending of the shell reduce to the generalized Cauchy kernel obtained for the corresponding plane stress case. The integral equations are solved and the stress intensity factors are given for various crack and shell dimensions. A bonded fiberglass reinforcement which may serve as a crack arrestor is used as an example.

Yahsi, O. S.↗
NASA NTRS1986

The crack problem in a reinforced cylindrical shell

A partially reinforced cylinder containing an axial through crack is considered. The reinforcement is assumed to be fully bonded to the main cylinder. The composite cylinder is thus modelled by a nonhomogeneous shell having a step change in the elastic properties at the z = 0 plane, z being the axial coordinate. Using a Reissner type transverse shear theory the problem is reduced to a pair of singular integral equations. In the special case of a crack tip touching the bimaterial interface it is shown that the dominant parts of the kernels of the integral equations associated with both membrane loading and bending of the shell reduce to the generalized Cauchy kernel obtained for the corresponding plane stress case. The integral equations are solved and the stress intensity factors are given for various crack and shell dimensions. A bonded fiberglass reinforcement which may serve as a crack arrestor is used as an example.

Yahsi, O. S.↗
NASA NTRS1985

The infrared echo of Type II supernovae with circumstellar dust shells. II - A probe into the presupernova evolution of the progenitor star

This paper studies the spectral appearance and evolution of the infrared light curve, also referred to as the infrared echo, of Type II supernovae embedded in carbon- or oxygen-rich circumstellar dust shells. The distinct spectral signature of the echo and its temporal evolution can be used to estimate the mass of the shell and identify the composition of the dust. Since the shell mass and dust composition are determined by the combined effect of stellar mass loss and the dredging of newly synthesized heavy elements to the stellar surface, observations of the infrared echo may provide useful clues to the presupernova evolution of the progenitor star.

Dwek, E.↗
NASA NTRS1985

Applications of spherical shells

A new technique of producing hollow spheres of many materials at a very rapid rate, at very low cost, and with high reproducibility of shell diameter and wall thickness has been developed. Shells formed of metal or of other solid materials are expected to find numerous technical and industrial applications. For example, metal shells might be used as inertial confinement fusion targets, or as the principal constituents in lightweight structural materials for NASA Space Stations or DOD large antennas and mirrors, or be employed as containers for phase-change heat-storage media, or serve as containers for hazardous materials, or be employed as catalytic surface agents.

Wang, T. G.↗
NASA NTRS1986

Sensational spherical shells

Fluid-dynamic and capillary forces can be used to form nearly perfect, very small spherical shells when a liquid that can solidify is passed through an annular die to form an annular jet. Gravity and certain properties of even the most ideal materials, however, can cause slight asymmetries. The primary objective of the present work is the control of this shell formation process in earth laboratories rather than space microgravity, through the development of facilities and methods that minimize the deleterious effects of gravity, aerodynamic drag, and uncontrolled cooling. The spherical shells thus produced can be used in insulation, recyclable filter materials, fire retardants, explosives, heat transport slurries, shock-absorbing armor, and solid rocket motors.

Lee, M. C.↗
NASA NTRS1985

Noise transmission of double wall composite shells

This paper describes analytical studies of noise transmission of double wall laminated composite cylindrical shells of finite extent. The main objective is to estimate structureborne noise generated by the concentrated random forces. The theoretical solutions of the governing acoustic-structural equations are obtained utilizing modal decomposition. Results indicate that from the viewpoint of noise attenuation the composite shell does not seem to offer advantage over an aluminum shell. However, the orientation of the fibers and the material characteristics of the soft viscoelastic core can be tailored to meet the specific needs of noise attenuation.

Vaicaitis, R.↗
NASA NTRS1986

Two supergiants in the Large Magellanic Cloud with thick dust shells

Ground-based observations from 0.6 to 20 microns have identified two luminous, evolved stars surrounded by thick dust shells among the Magellanic Cloud sources detected by the Infrared Astronomical Satellite. Their energy distributions resemble those of typical Galactic OH/IR stars, but they have bolometric magnitudes brighter than -9 and the small-amplitude variability of supergiants. One star, IRAS 04553 - 6825, has a special type of M7.5 and a dust shell which absorbs and reradiates roughly 75 percent of the star's luminosity; its radial velocity confirms its LMC membership. The second star, IRAS 05346 - 6949, has an even thicker dust shell, and the central star is not observable.

Elias, J. H.↗
NASA NTRS1986

Experiments on annular liquid jet instability and on the formation of liquid shells

An annular jet flow of liquid surrounding a flow of gas at its core is extremely unstable. Experiments are described in which such a flow is generated by an annular nozzle operated at fairly specific conditions. It is shown that periodic, axisymmetric oscillations arise spontaneously within the cylindrical sheet emerging from the nozzle and grow with such rapidity along the axial dimension that a sealing-off and encapsulation of the core gas occurs within a few jet diameters. This is closely followed by a pinchoff of the liquid between adjacent bubbles. The liquid shells set free thereby assume spherically symmetric form under capillary forces, and each contains a precisely uniform measure of gas and of liquid on account of the extremely high frequency-stability of the process. Description is given of the fluid dynamic processes by which the shells are formed, and mention is made of exploiting the instability for the production of rigid shells for technological applications.

Kendall, J. M.↗
NASA NTRS1986

Arbitrarily laminated, anisotropic cylindrical shell under internal pressure

An arbitrarily laminated, anisotropic cylindrical shell of finite length, under uniform internal pressure, is analyzed using Love-Timoshenko's kinematic relations and under the framework of classical lamination theory. The previously obtained solutions for asymmetrically laminated orthotropic (cross-ply) as well as unbalanced-symmetric and balanced-unsymmetric (angle-ply) cylindrical shells under the same loading conditions have been shown to be special cases of the present closed-form solution. Numerical results have been presented for a two-layer cylindrical shell and compared with those obtained using finite element solutions based on the layerwise constant shear-angle theory. These are expected to serve as benchmark solutions for future comparisons and to facilitate the use of unsymmetric lamination in design.

Chaudhuri, Reaz Z.↗
NASA NTRS1986

IRAS observations of R Coronae Borealis - Detection and study of a fossil shell

IRAS observations of the extreme hydrogen-deficient supergiant R CrB are presented and discussed. The star is surrounded by an enormous cool dust cloud which is tentatively identified as a fossil remnant of the hydrogen-rich envelope of the star. The angular extent of the emission corresponds to a linear extent of 8 pc, 20 times larger than the largest previously known shell around a late-type star. The radiating material is distributed very symmetrically over a wide range of radial distances from the star. The dust temperature is nearly constant throughout the extended shell. The total mass in the shell is about 0.3 solar mass. The ejection process appears to have occurred in a spherically symmetric fashion with a nearly constant mass loss rate and expansion velocity over a period of about 150,000 yr, terminating about 26,000 yr ago.

Gillett, F. C.↗