Search NASA⌕ Search

SEARCH · Search NASA

Results for “Solar Plus”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

High Speed CCD Photometry of the P/Shoemaker-Levy 9-Jupiter Collision

Using the National Solar Observatory 64-inch Vacuum Tower Telescope at Sacramento Peak, we have obtained high spatial and time resolution images of Jupiter in the visible continuum at 5000 A, in the 7250 A and 8900 A methane bands, plus their adjacent continuum bands (at 7500 A and 9500 A), before, during, and after the times of the collisions. In addition, with the use of a beam splitter, near-IR images (J-band) were also obtained simultaneously with a 256 x 256 NICMOS chip. The observations spanned the time period 14 - 25 July 1994, at intervals of several hours each day, depending on the weather and the visibility of Jupiter. The original proposal was to use the data to track the evolution of the impact clouds produced by impacts from comet Shoemaker-Levy 9. We are still refining the automated data analysis software and finalizing the calibration of the images. The latter is an arduous problem since many of the images were made in daylight. We expect to finish these two tasks in early 1998, whereupon the analysis will proceed very quickly. Our goals remain unchanged. We will use lightcurves of the impact sites for the following goals: (1) to monitor and understand the time variability of the optical depths of the impact clouds; (2) to monitor and understand the time variability of the masses of the impact clouds; (3) to monitor the wind speeds in the upper atmosphere of Jupiter.

Source record↗

A device model for the tandem junction solar cell

A conceptual device model has been developed to explain operation of the tandem junction cell (TJC) when back contacts only are used. Operation and parameters of the cell are explained by transistor action. Experimental observations are presented which confirm that current is collected for carrier generation in the front uncontacted n(plus) region. The model should be useful as a guideline to optimize the TJC by application of transistor design principles.

Matzen, W. T.↗

Black Holes and Neutron Stars in Nearby Galaxies: Insights from NuSTAR

Nearby galaxy surveys have long classified X-ray binaries (XRBs) by the mass category of their donor stars (high-mass and low-mass). The NuSTAR (Nuclear Spectroscopic Telescope Array) observatory, which provides imaging data at E greater than 10 keV (kiloelectronvolts), has enabled the classification of extragalactic XRBs by their compact object type: neutron star (NS) or black hole (BH). We analyzed NuSTAR/Chandra/XMM-Newton observations from a NuSTAR-selected sample of 12 galaxies within 5 Mpc (megaparsecs) having stellar masses (M (sub asterisk)) 10 (sup 7-11) solar masses and star formation rates (SFRs) approximately 0.01-15 solar masses per year. We detected 128 NuSTAR sources to a sensitivity of 10 (sup 38) ergs per second. Using NuSTAR color-intensity and color-color diagrams we classified 43 of these sources as candidate NSs and 47 as candidate BHs. We further subdivide BHs by accretion states (soft, intermediate, and hard) and NSs by weak (Z/Atoll) and strong (accreting pulsar) magnetic field. Using eight normal (Milky Way-type) galaxies in the sample, we confirm the relation between the SFR and galaxy X-ray point source luminosity in the 4-25 and 12-25 keV energy bands. We also constrained galaxy X-ray point source luminosity using the relation L (sub X) equals M (sub asterisk) plus Beta SFR, finding agreement with previous work. The X-ray luminosity function (XLF) of all sources in the 4-25 and 12-25 keV energy bands matches the alpha = 1.6 slope for high-mass XRBs. We find that NS XLFs suggest a decline beginning at the Eddington limit for a 1.4 solar mass NS, whereas the BH fraction shows an approximate monotonic increase in the 4-25 and 12-25 keV energy bands. We calculate the overall ratio of BH to NS to be approximately 1 for 4-25 keV and approximately 2 for 12-25 keV.

Vulic, N.↗

Significant Efficiency Enhancements in Non‐Y Series Acceptors by the Addition of Outer Side Chains

Abstract Most current highly efficient organic solar cells utilize small molecules like Y6 and its derivatives as electron acceptors in the photoactive layer. In this work, a small molecule acceptor, SC8‐IT4F, is developed through outer side chain engineering on the terminal thiophene of a conjugated 6,12‐dihydro‐dithienoindeno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene (IDTT) central core. Compared to the reference molecule C8‐IT4F, which lacks outer side chains, SC8‐IT4F displays notable differences in molecule geometry (as shown by simulations), thermal behavior, single‐crystal packing, and film morphology. Blend films of SC8‐IT4F and the polymer donor PM6 exhibit larger carrier mobilities, longer carrier lifetimes, and reduced recombination compared to C8‐IT4F, resulting in improved device performance. Binary photovoltaic devices based on the PM6:SC8‐IT4F films reveal an optimal efficiency over 15%, which is one of the best values for non‐Y type small molecule acceptors (SMAs). The resultant devices also show better thermal and operational stability than the control PM6:L8‐BO devices. SC8‐IT4F and its blend exhibit a higher relative degree of crystallinity and π coherence length, compared to C8‐IT4F samples, beneficial for charge transport and device performance. The results indicate that outer side chain engineering on existing small electron acceptors can be a promising molecular design strategy for further pursuing high‐performance organic solar cells.

He, Qiao [Department of Chemistry and Centre for P↗

Observations of the solar wind speed near the sun

Two-antenna scintillation (IPS) observations can provide accurate measurements of the velocity with which electron density fluctuations drift past the line of sight. We will present recent IPS measurements made with the EISCAT and VLBA arrays. It is common, particularly during declining activity. for the line of sight to pass through plasma with a wide range of speed. Therefore it is important to account for the line of sight integration. It is clear from ULYSSES measurements that the speed is bimodal in nature, i.e., either 'fast' or 'slow.' Thus it is not necessary to model a continuous velocity distribution - one need only locate the 'fast-slow' interface. In addition one must consider the possibility that the density fluctuations are moving with respect to the flow of particles. Alfven waves propagating through field-aligned density fluctuations can mimic a sound wave in this respect, so the apparent IPS velocity can be the flow speed plus the Alfven speed. In modeling the IPS it is important that the scattering be 'weak,' because the weak scattering model requires only 1 spatial parameter instead of 3. Furthermore the effect of multiple velocities in much more distinct in weak scattering. EISCAT can only operate near 933 MHz, which limits the observations to outside of 17R(solar mass). The VLBA is the only facility with the combination of high frequency operation and long baselines required to observe inside of 15R(solar mass). A simple bimodal model has been successfully used to interpret our IPS observations near the sun. Farther out interaction regions have built up significantly and a two speed model is no longer valid. An apparent deceleration in the fast polar wind is sometimes evident when compared to the ULYSSES observation. The density variance delta N(exp 2)e in the fast wind appears to decrease from equator to pole.

Grall, R. R.↗

Solar flare proton spectrum averaged over the last 5000 years

The solar flare differential energy spectrum and integral proton flux above 10 MeV averaged over the last several thousand years are derived from thermoluminescence (TL) data. The dose-rate depth profile is obtained using a new TL equilibrium technique which is independent of the TL decay kinetics. The dose-rate depth profile produced by solar flare protons with a differential energy spectrum of the form dJ/dE = KE to the minus gamma power is calculated for arbitrary gamma. The best fit to the TL data in rock 14310 is obtained for gamma = 2.3 plus or minus 0.2 and an omnidirectional (4 pi) integral flux above 10 MeV of 40 to 80 prot/sq cm/sec. The TL half-life is determined to be 2000 yr. These results are compared to those for Na-22 (half-life of. 2.6 yr) and Al-26 (half-life of 740,000 yr) obtained by Wahlen et al. (1972) and Rancitelli et al. (1972), and it is concluded that the spectral shape and flux of protons in the interval from 25 to 100 MeV is the same within experimental errors when averaged over these three very different time periods.

Hoyt, H. P., Jr.↗

Low-cost Solar Array (LSA) project

Progress made by the Low-Cost Silicon Solar Array Project during the period January through March 1978 is reported. It includes task reports on silicon material processing, large-area silicon sheet development, encapsulation materials testing and development, project engineering and operations, and manufacturing techniques, plus the steps taken to integrate these efforts.

Source record↗

STS-61 Space Shuttle mission report

The STS-61 Space Shuttle Program Mission Report summarizes the Hubble Space Telescope (HST) servicing mission as well as the Orbiter, External Tank (ET), Solid Rocket Booster (SRB), Redesigned Solid Rocket Motor (RSRM), and the Space Shuttle main engine (SSME) systems performance during the fifty-ninth flight of the Space Shuttle Program and fifth flight of the Orbiter vehicle Endeavour (OV-105). In addition to the Orbiter, the flight vehicle consisted of an ET designated as ET-60; three SSME's which were designated as serial numbers 2019, 2033, and 2017 in positions 1, 2, and 3, respectively; and two SRB's which were designated BI-063. The RSRM's that were installed in each SRB were designated as 360L023A (lightweight) for the left SRB, and 360L023B (lightweight) for the right SRB. This STS-61 Space Shuttle Program Mission Report fulfills the Space Shuttle Program requirement as documented in NSTS 07700, Volume 8, Appendix E. That document requires that each major organizational element supporting the Program report the results of its hardware evaluation and mission performance plus identify all related in-flight anomalies. The primary objective of the STS-61 mission was to perform the first on-orbit servicing of the Hubble Space Telescope. The servicing tasks included the installation of new solar arrays, replacement of the Wide Field/Planetary Camera I (WF/PC I) with WF/PC II, replacement of the High Speed Photometer (HSP) with the Corrective Optics Space Telescope Axial Replacement (COSTAR), replacement of rate sensing units (RSU's) and electronic control units (ECU's), installation of new magnetic sensing systems and fuse plugs, and the repair of the Goddard High Resolution Spectrometer (GHRS). Secondary objectives were to perform the requirements of the IMAX Cargo Bay Camera (ICBC), the IMAX Camera, and the Air Force Maui Optical Site (AMOS) Calibration Test.

Fricke, Robert W., Jr.↗

Transport of Solar Wind Fluctuations: A Two-Component Model

We present a new model for the transport of solar wind fluctuations which treats them as two interacting incompressible components: quasi-two-dimensional turbulence and a wave-like piece. Quantities solved for include the energy, cross helicity, and characteristic transverse length scale of each component, plus the proton temperature. The development of the model is outlined and numerical solutions are compared with spacecraft observations. Compared to previous single-component models, this new model incorporates a more physically realistic treatment of fluctuations induced by pickup ions and yields improved agreement with observed values of the correlation length, while maintaining good observational accord with the energy, cross helicity, and temperature.

Oughton, S.↗

Evidence for the Thermal Sunyaev Zeldovich Effect Associated with Quasar Feedback

Using a radio-quiet subsample of the Sloan Digital Sky Survey spectroscopic quasar catalogue, spanning redshifts 0.5-3.5, we derive the mean millimetre and far-infrared quasar spectral energy distributions (SEDs) via a stacking analysis of Atacama Cosmology Telescope and Herschel-Spectral and Photometric Imaging REceiver data. We constrain the form of the far-infrared emission and find 3 sigma-4 sigma evidence for the thermal Sunyaev-Zel'dovich (SZ) effect, characteristic of a hot ionized gas component with thermal energy (6.2 plus or minus 1.7) × 10 (exp 60) erg. This amount of thermal energy is greater than expected assuming only hot gas in virial equilibrium with the dark matter haloes of (1-5) × 10(exp 12) h(exp −1) solar mass that these systems are expected to occupy, though the highest quasar mass estimates found in the literature could explain a large fraction of this energy. Our measurements are consistent with quasars depositing up to (14.5 +/- 3.3)tau (sub 8)(exp -1) per cent of their radiative energy into their circumgalactic environment if their typical period of quasar activity is tau(sub 8) x 108 yr. For high quasar host masses, approximately 10(exp 13) h(exp −1) solar mass, this percentage will be reduced. Furthermore, the uncertainty on this percentage is only statistical and additional systematic uncertainties enter at the 40 per cent level. The SEDs are dust dominated in all bands and we consider various models for dust emission. While sufficiently complex dust models can obviate the SZ effect, the SZ interpretation remains favoured at the 3 sigma-4 sigma level for most models.

Sunyaev-Zeldovich (SZ)↗

Evaluation of the Applicability of Solar and Lamp Radiometric Calibrations of a Precision Sun Photometer Operating Between 300 and 1025 nm

Over a period of 3 year a precision Sun photometer (SPM) operating between 300 and 1025 nm was calibrated four times at three different high-mountain sites in Switzerland, Germany, and the United States by means of the Langley-plot technique. We found that for atmospheric window wavelengths the total error (2 sigma-statistical plus systematic errors) of the calibration constants V(sub 0)(lambda), the SPM voltage in the absence of any attenuating atmosphere, can be kept below 1.60% in the UV-A and blue, 0.9% in the mid-visible, and 0.6% in the near-infra red spectral region. For SPM channels within strong water-vapor or ozone absorption bands a modified Langley-plot technique was used to determine V(sub 0)(lambda) with a lower accuracy. Within the same period of time, we calibrated the SPM five times using irradiance standard lamps in the optical labs of the Physikalisch-Meteorologisches Observatorium Davos and World Radiation Center, Switzerland, and of the Remote Sensing Group of the Optical Sciences Center, University of Arizona, Tucson, Arizona. The lab calibration method requires knowledge of the extraterrestrial spectral irradiance. When we refer the standard lamp results to the World Radiation Center extraterrestrial solar irradiance spectrum, they agree with the Langley results within 2% at 6 or 13 SPM wavelengths. The largest disagreement (4.4%) is found for the channel centered at 610 nm. The results of these intercomparisons change significantly when the lamp results are referred to two different extraterrestrial solar irradiance spectra that have become recently available.

Schmid, Beat↗

Identifying Barriers to Solar and Storage Hybrids: Modeled vs. empirical wholesale market value and net-value for co-located solar + storage projects [Slides]

Large-scale (1MW+) co-located solar and battery storage projects are expanding rapidly in the United States, but their realized contribution to the bulk power system remains poorly understood because public project-level operating data are limited. The Lawrence Berkeley National Laboratory estimates the wholesale market value of 280 operational photovoltaic-plus-storage (PV+S) projects across the seven ISOs/RTOs and 19 additional balancing authorities, representing roughly 95% of the U.S. PV+S fleet in 2024. We model optimized hourly dispatch under energy, capacity, and ancillary-service market opportunities and compare the resulting value with standalone PV value, project-specific levelized cost estimates, and empirical operating or revenue data where available.

14 SOLAR ENERGY↗

A TRANSMISSION SPECTRUM OF TITAN'S NORTH POLAR ATMOSPHERE FROM A SPECULAR REFLECTION OF THE SUN

Cassini/VIMS T85 observations of a solar specular reflection off of Kivu Lacus (87.°4N 241.°1E) provide an empirical transmission spectrum of Titan's atmosphere. Because this observation was acquired from short range (33,000 km), its intensity makes it visible within the 2.0, 2.7, and 2.8 μm atmospheric windows in addition to the 5 μm window where all previous specular reflections have been seen. The resulting measurement of the total one-way normal atmospheric optical depth (corresponding to haze scattering plus haze and gas absorption) provides strong empirical constraints on radiative transfer models. Using those models, we find that the total haze column abundance in our observation is 20% higher than the Huygens equatorial value. Ours is the first measurement in the 2-5 μm wavelength range that probes all the way to the surface in Titan's arctic, where the vast majority of surface liquids are located. The specular technique complements other probes of atmospheric properties such as solar occultations and the direct measurements from Huygens. In breaking the degeneracy between surface and atmospheric absorptions, our measured optical depths will help to drive future calculations of deconvolved surface albedo spectra.

79 ASTRONOMY AND ASTROPHYSICS↗

Energy and pitch angle distributions for auroral ions using the current sheet acceleration model

Using a dipole-plus-tail magnetic field model, H(+), He(+2), and O(+6) ions are followed numerically, backward in time, from an output plane perpendicular to the axis of the geomagnetic tail, to their point of entrance to the magnetosphere as solar wind particles in the magnetosheath. An adiabatic or guiding center approximation is used in regions where the particles do not interact directly with the current sheet. A Maxwellian distribution with bulk flow is assumed for solar wind particles in the magnetosheath. Bulk velocity, density, and temperature along the magnetopause are taken from the fluid calculations of Spreiter. Using Liouville's theorem, and varying initial conditions at the output plane, the distribution function is found as a function of energy and pitch angle at the output plane. These results are then mapped to the auroral ionosphere using guiding center theory.

Jaeger, E. F.↗

Accuracy Assessment and Correction of Vaisala RS92 Radiosonde Water Vapor Measurements

Relative humidity (RH) measurements from Vaisala RS92 radiosondes are widely used in both research and operational applications, although the measurement accuracy is not well characterized as a function of its known dependences on height, RH, and time of day (or solar altitude angle). This study characterizes RS92 mean bias error as a function of its dependences by comparing simultaneous measurements from RS92 radiosondes and from three reference instruments of known accuracy. The cryogenic frostpoint hygrometer (CFH) gives the RS92 accuracy above the 700 mb level; the ARM microwave radiometer gives the RS92 accuracy in the lower troposphere; and the ARM SurTHref system gives the RS92 accuracy at the surface using 6 RH probes with NIST-traceable calibrations. These RS92 assessments are combined using the principle of Consensus Referencing to yield a detailed estimate of RS92 accuracy from the surface to the lowermost stratosphere. An empirical bias correction is derived to remove the mean bias error, yielding corrected RS92 measurements whose mean accuracy is estimated to be +/-3% of the measured RH value for nighttime soundings and +/-4% for daytime soundings, plus an RH offset uncertainty of +/-0.5%RH that is significant for dry conditions. The accuracy of individual RS92 soundings is further characterized by the 1-sigma "production variability," estimated to be +/-1.5% of the measured RH value. The daytime bias correction should not be applied to cloudy daytime soundings, because clouds affect the solar radiation error in a complicated and uncharacterized way.

Whiteman, David N.↗

EUNIS Underflight Calibrations of CDS, EIT, TRACE, EIS, and EUVI

The Extreme-Ultraviolet Normal-Incidence Spectrograph (EUNIS) is a sounding rocket instrument that obtains imaged high-resolution solar spectra. It has now had two successful flights, on 2006 April 12 and 2007 November 16, providing data to support underflight calibrations for a number of orbiting solar experiments on both occasions. A regular part of each campaign is the end-to-end radiometric calibration of the rocket payload carried out at RAL in the UK, using the same facility that provided pre-flight CDS and EIS calibrations. The measurements, traceable to primary radiometric standards, can establish the absolute EUNIS response within a relative uncertainty of 10% over its full longwave bandpass of 300-370A. During each EUNIS flight, coordinated observations are made of overlapping solar locations by all participating space experiments, and identified by subsequent image co-registrations, allowing the EUNIS calibrations to be applied to these other instruments as well. The calibration transfer is straightforward for wavelengths within the EUNIS LW bandpass, and is extended to other wavelengths by means of a series of 'insensitive' line-ratios, with one line of each pair in the calibrated band and the other in the transfer band. In this way, the EUNIS-06 flight is able to update the radiometric calibrations of CDS NISl (plus 2nd order NIS2 near 2x304A), all four channels of EIT, and the three EUV channels of TRACE. The EUNIS-07 flight will further update those missions, as well as both channels of Hinode/EIT and all four channels of STEREO/SECCHI/EUVI. Future EUNIS flights have been proposed that will continue this underflight calibration service. EUNIS is supported by the NASA Heliophysics Division through its Low Cost Access to Space Program in Solar and Heliospheric Physics.

Thomas, Roger J.↗

Significance of Landsat-7 Spacecraft Level Thermal Balance and Thermal Test for ETM+Instrument

The thermal design and the instrument thermal vacuum (T/V) test of the Landsat-7 Enhanced Thematic Mapper Plus (ETM+) instrument were based on the Landsat-4, 5 and 6 heritage. The ETM+ scanner thermal model was also inherited from Landsat-4, 5 and 6. The temperature predictions of many scanner components in the original thermal model had poor agreement with the spacecraft and instrument integrated sun-pointing safehold (SPSH) thermal balance (T/B) test results. The spacecraft and instrument integrated T/B test led to a change of the Full Aperture Calibrator (FAC) motor stack "solar shield" coating from MIL-C-5541 to multi-layer insulation (MLI) thermal blanket. The temperature predictions of the Auxiliary Electronics Module (AEM) in the thermal model also had poor agreement with the T/B test results. Modifications to the scanner and AEM thermal models were performed to give good agreement between the temperature predictions and the test results. The correlated ETM+ thermal model was used to obtain flight temperature predictions. The flight temperature predictions in the nominal 15-orbit mission profile, plus margins, were used as the yellow limits for most of the ETM+ components. The spacecraft and instrument integrated T/B and TN test also revealed that the standby heater capacity on the Scan Mirror Assembly (SMA) was insufficient when the Earth Background Simulator (EBS) was 1 50C or colder, and the baffle heater possibly caused the coherent noise in the narrow band data when it was on. Also, the cooler cool-down was significantly faster than that in the instrument T/V test, and the coldest Cold Focal Plane Array (CFPA) temperature achieved was colder.

Choi, Michael K.↗

Enhanced Growth Rate and Silane Utilization in Amorphous Silicon and Nanocrystalline-Silicon Solar Cell Deposition Via Gas Phase Additives

Air Products set out to investigate the impact of additives on the deposition rate of both CSi and Si-H films. One criterion for additives was that they could be used in conventional PECVD processing, which would require sufficient vapor pressure to deliver material to the process chamber at the required flow rates. The flow rate required would depend on the size of the substrate onto which silicon films were being deposited, potentially ranging from 200 mm diameter wafers to the 5.7 m 2 glass substrates used in GEN 8.5 flat-panel display tools. In choosing higher-order silanes, both disilane and trisilane had sufficient vapor pressure to withdraw gas at the required flow rates of up to 120 sccm. This report presents results obtained from testing at Air Products electronic technology laboratories, located in Allentown, PA, which focused on developing processes on a commercial IC reactor using silane and mixtures of silane plus additives. These processes were deployed to compare deposition rates and film properties with and without additives, with a goal of maximizing the deposition rate while maintaining or improving film properties.

14 SOLAR ENERGY↗