Search NASA⌕ Search

SEARCH · Search NASA

Results for “Spectral Analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Post-analysis report on Chesapeake Bay data processing

The additional processing performed on data collected over the Rhode River Test Site and Forestry Site in November 1970 is reported. The techniques and procedures used to obtain the processed results are described. Thermal data collected over three approximately parallel lines of the site were contoured, and the results color coded, for the purpose of delineating important scene constituents and to identify trees attacked by pine bark beetles. Contouring work and histogram preparation are reviewed and the important conclusions from the spectral analysis and recognition computer (SPARC) signature extension work are summarized. The SPARC setup and processing records are presented and recommendations are made for future data collection over the site.

Thomson, F.↗

Systolic Processor Array For Recognition Of Spectra

Spectral signatures of materials detected and identified quickly. Spectral Analysis Systolic Processor Array (SPA2) relatively inexpensive and satisfies need to analyze large, complex volume of multispectral data generated by imaging spectrometers to extract desired information: computational performance needed to do this in real time exceeds that of current supercomputers. Locates highly similar segments or contiguous subsegments in two different spectra at time. Compares sampled spectra from instruments with data base of spectral signatures of known materials. Computes and reports scores that express degrees of similarity between sampled and data-base spectra.

Chow, Edward T.↗

Vibrational and Rovibrational Spectroscopy Applied to Astrochemistry

The detection of molecules in astrophysical environments almost always requires remote sensing. While radioastronomical observation and associated rotational spectroscopy are powerful astronomical tools, infrared spectral analysis provides a unique means of examining the observable universe, especially for molecules where permanent dipole moments are small or even non-existent. The molecular vibrations of small molecules are now able to be modeled via quantum chemistry and electronic structure theory conjoined to vibrational analysis to within spectroscopic accuracy in many cases. This chapter will showcase this success and build upon it to show how such advances are now being leveraged to describe molecular vibrations for molecules containing dozens of atoms, electronically excited states, "hot bands," exoplanetary atmospheric opacity data, and even emission of polycyclic aromatic hydrocarbons. All of these are required to prune the interstellar spectral garden of its "weeds" in search of "flowers" that will provide the necessary fingerprints for astronomers to be able to probe the heavens for its past, present, and future secrets.

Ryan C. Fortenberry↗

Lossy Data Compression Effects on Wall-bounded Turbulence: Bounds on Data Reduction

Postprocessing and storage of large data sets represent one of the main computational bottlenecks in computational fluid dynamics. We assume that the accuracy necessary for computation is higher than needed for postprocessing. Therefore, in the current work we assess thresholds for data reduction as required by the most common data analysis tools used in the study of fluid flow phenomena, specifically wall-bounded turbulence. These thresholds are imposed a priori by the user in L 2 -norm, and we assess a set of parameters to identify the minimum accuracy requirements. The method considered in the present work is the discrete Legendre transform (DLT), which we evaluate in the computation of turbulence statistics, spectral analysis and resilience for cases highly-sensitive to the initial conditions. Maximum acceptable compression ratios of the original data have been found to be around 97%, depending on the application purpose. Furthermore, the new method outperforms downsampling, as well as the previously explored data truncation method based on discrete Chebyshev transform (DCT).

97 MATHEMATICS AND COMPUTING↗

X-ray spectroscopy of SNR E0102-72 with the ASCA satellite

The Advanced Satellite for Cosmology and Astrophysics (ASCA) satellite has obtained a moderate-resolution energy spectrum of E0102-72, the brightest Supernova Remnant (SNR) in the Small Magellanic Cloud (SMC). This paper reports on the first results of the analysis of the high quality spectrum of E0102-72. The spectrum shows resolved emission lines of He-like K alpha, H-like K alpha and K beta from oxygen, neon, and magnesium. The intensity ratios of these lines cannot be explained by a multi-component plasma model with uniform abundances, but requires abundance inhomogeneity in the plasma. We demonstrate how the spectral capabilities of the ASCA SIS make available new diagnostics of X-ray plasmas in a state of non-equilibrium ionization. Some interpretation based on the spectral analysis is also given.

Hayashi, Ichizo↗

Mapping soils, crops, and rangelands by machine analysis of multitemporal ERTS-1 data

ERTS-1 data, obtained during the period 25 August 1972 to 5 September 1973 over a range of test sites in the Central United States, have been used for identifying and mapping differences in soil patterns, species and conditions of cultivated crops, and conditions of rangelands. Multispectral scanner data from multiple ERTS passes over certain test sites have provided the opportunity to study temporal changes in the scene. Multispectral classifications delineating soils boundaries in different test sites compared well with existing soil association maps prepared by conventional means. Spectral analysis of ERTS data was used to identify, maps, and make areal measurements of wheat in western Kansas. Multispectral analysis of ERTS-1 data provided patterns in rangelands which can be related to soils differences, range management practices, and the extent of infestation of grasslands by mesquite (prosopis fuliflora) and juniper (juniperus spp.).

Baumgardner, M. F.↗

Demonstration of the Application of Composite Load Spectra (CLS) and Probabilistic Structural Analysis (PSAM) Codes to SSME Heat Exchanger Turnaround Vane

This report describes a probabilistic structural analysis performed to determine the probabilistic structural response under fluctuating random pressure loads for the Space Shuttle Main Engine (SSME) turnaround vane. It uses a newly developed frequency and distance dependent correlation model that has features to model the decay phenomena along the flow and across the flow with the capability to introduce a phase delay. The analytical results are compared using two computer codes SAFER (Spectral Analysis of Finite Element Responses) and NESSUS (Numerical Evaluation of Stochastic Structures Under Stress) and with experimentally observed strain gage data. The computer code NESSUS with an interface to a sub set of Composite Load Spectra (CLS) code is used for the probabilistic analysis. A Fatigue code was used to calculate fatigue damage due to the random pressure excitation. The random variables modeled include engine system primitive variables that influence the operating conditions, convection velocity coefficient, stress concentration factor, structural damping, and thickness of the inner and outer vanes. The need for an appropriate correlation model in addition to magnitude of the PSD is emphasized. The study demonstrates that correlation characteristics even under random pressure loads are capable of causing resonance like effects for some modes. The study identifies the important variables that contribute to structural alternate stress response and drive the fatigue damage for the new design. Since the alternate stress for the new redesign is less than the endurance limit for the material, the damage due high cycle fatigue is negligible.

Rajagopal, Kadambi R.↗

Hydromagnetic wavelike phenomena from Helios time delay measurements by remote sensing

A survey of the electron content measurements during solar occultations of the Helios A and B spacecraft is presented, and a spectral analysis using the method of maximum entropy is discussed. Typical variations measured are on the order of 0.1-1.8 x 10 to the 18th/sq m, while typical values for the rate of change are 0.7-50 x 10 to the 13th per sq m per sec. Numerical results in agreement with findings from Helios radio science, reveal a fundamental period of about 70 minutes superimposed by minor spectral peaks corresponding to shorter time periods such as 35 and 25 minutes. In addition, the periodicities observed in electron content are discussed in terms of fast hydromagnetic waves excited by nonlinear Alfven waves via coupling terms before crossing the Helios ray path. It is noted that for the first time experimental evidence is presented that hydromagnetic waves may actually be propagating from the solar corona into the interplanetary medium.

Edenhofer, P.↗

Evidence for equatorial Kelvin modes in Nimbus-7 LIMS

Equatorial Kelvin waves have emerged as an important source of westerly momentum for the tropical stratosphere. The present investigation is concerned with an analysis of remotely derived temperatures from Nimbus-7 LIMS (Limb Infrared Monitor of the Stratosphere). It is found that eastward propagating disturbances are present in two independent LIMS data sets. The disturbances manifest themselves consistently at several levels throughout the stratosphere and account for much of the tropical temperature variance out to latitudes where extratropical signals become large. Compelling evidence is found for several distinct phase velocities. Spectral analysis indicates isolated eastward variance at principally two frequencies for both wavenumbers.

Salby, M. L.↗

Laer-induced Breakdown Spectroscopy Instrument for Element Analysis of Planetary Surfaces

One of the most fundamental pieces of information about any planetary body is the elemental and mineralogical composition of its surface materials. We are developing an instrument to obtain such data at ranges of up to several hundreds of meters using the technique of Laser-Induced Breakdown Spectroscopy (LIBS). We envision our instrument being used from a spacecraft in close rendezvous with small bodies such as comets and asteroids, or deployed on surface-rover vehicles on large bodies such as Mars and the Moon. The elemental analysis is based on atomic emission spectroscopy of a laser-induced plasma or spark. A pulsed, diode pumped Nd:YAG laser of several hundred millijoules optical energy is used to vaporize and electronically excite the constituent elements of a rock surface remotely located from the laser. Light emitted from the excited plasma is collected and introduced to the entrance slit of a small grating spectrometer. The spectrally dispersed spark light is detected with either a linear photo diode array or area CCD array. When the latter detector is used, the optical and spectrometer components of the LIBS instrument can also be used in a passive imaging mode to collect and integrate reflected sunlight from the same rock surface. Absorption spectral analysis of this reflected light gives mineralogical information that provides a remote geochemical characterization of the rock surface. We performed laboratory calibrations in air and in vacuum on standard rock powders to quantify the LIBS analysis. We performed preliminary field tests using commercially available components to demonstrate remote LIBS analysis of terrestrial rock surfaces at ranges of over 25 m, and we have demonstrated compatibility with a six-wheeled Russian robotic rover vehicle. Based on these results, we believe that all major and most minor elements expected on planetary surfaces can be measured with absolute accuracy of 10-15 percent and much higher relative accuracy. We have performed preliminary systems analysis of a LIBS instrument to evaluate probable mass and power requirements; results of this analysis are summarized.

Blacic, J.↗

The Application of Acoustic Measurements and Audio Recordings for Diagnosis of In-Flight Hardware Anomalies

In many cases, an initial symptom of hardware malfunction is unusual or unexpected acoustic noise. Many industries such as automotive, heating and air conditioning, and petro-chemical processing use noise and vibration data along with rotating machinery analysis techniques to identify noise sources and correct hardware defects. The NASA/Johnson Space Center Acoustics Office monitors the acoustic environment of the International Space Station (ISS) through periodic sound level measurement surveys. Trending of the sound level measurement survey results can identify in-flight hardware anomalies. The crew of the ISS also serves as a "detection tool" in identifying unusual hardware noises; in these cases the spectral analysis of audio recordings made on orbit can be used to identify hardware defects that are related to rotating components such as fans, pumps, and compressors. In this paper, three examples of the use of sound level measurements and audio recordings for the diagnosis of in-flight hardware anomalies are discussed: identification of blocked inter-module ventilation (IMV) ducts, diagnosis of abnormal ISS Crew Quarters rack exhaust fan noise, and the identification and replacement of a defective flywheel assembly in the Treadmill with Vibration Isolation (TVIS) hardware. In each of these examples, crew time was saved by identifying the off nominal component or condition that existed and in directing in-flight maintenance activities to address and correct each of these problems.

Welsh, David↗

Tailoring the Structural, Optical and Magnetic Properties of NiFe{sub 2}O{sub 4} by Varying Annealing Temperature

Magnetic nanocrystalline NiFe{sub 2}O{sub 4} nanoparticles of size ranging between 13 and 19 nm were synthesized by the hydrothermal method using polyethylene glycol (PEG) as surfactant. The role of annealing on phase, crystallite size, and morphology was determined by X-ray diffraction (XRD) and transmission electron microscopy (TEM). Energy-dispersive X-ray spectroscopy (EDX) was used for qualitative analysis. X-ray diffraction confirmed the single phase of as-obtained particles. TEM revealed a spherical morphology having an average particle size of 13.73 nm at 523 K and rises to 14.89, 16.42, and 21.14 nm at 623, 723, and 823 K respectively, which is approximately the same as the crystallite size determined from XRD. EDX results confirmed that elemental ratios were in stoichiometry. Fourier transform infrared (FTIR) spectral analysis demonstrates the formation of M-O bond in NiFe{sub 2}O{sub 4} nanoparticles. The optical spectra obtained from UV-visible spectroscopy revealed that nanoparticles have direct allowed energy band gap of 2.34, 2.47, 2.70, and 2.20 eV at 523, 623, 723, and 823 K respectively. A vibrating sample magnetometer (VSM) was used at room temperature for magnetic measurements which further showed ferromagnetic behavior of as-synthesized material. In addition, it was found that saturation magnetization increases with an increase of annealing temperature while coercivity decreases with temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Remote sensing of weather and climate parameters from HIRS2/MSU on Tiros-N

At the Goddard Laboratory for Atmospheric Sciences (GLAS) a physically based satellite temperature sounding retrieval system, involving the simultaneous analysis of HIRS2 and MSU sounding data, has been developed for determining atmospheric and surface conditions which are consistent with the observed radiances. In addition to determining accurate atmospheric temperature profiles even in the presence of cloud contamination, the system provides global estimates of day and night sea or land surface temperatures, snow and ice cover, and parameters related to cloud cover. The inverse radiative transfer equation approach to the multi-spectral analysis of the data, and details of its implementation, are described. Ice, snow, and cloud fields derived for January 1979 are consistent with other measures of similar parameters obtained from AVHRR and SMMR. Monthly mean sea-surface temperature fields agree with those derived from ship and buoy measurements to 0.5 C.

Susskind, J.↗

Observations of ULF oscillations in the ion fluxes at small pitch angles with ATS 6

The ultra-low-frequency modulation of ion flux densities at small pitch angles observed by ATS 6 is examined, with particular attention given to a detailed analysis of a representative event. ULF modulation events with maximum modulation at small pitch angles were identified 14 times during the first eight months of operation of the NOAA low-energy particle detector on ATS 6. For the event of October 23, 1974, maximum flux modulation, with a maximum/minimum intensity ratio of 3.7, was observed in the 100 to 150 keV detector at an angle of 32 deg to the ambient field. Spectral analysis of magnetic field data reveals a right elliptically polarized magnetic perturbation with a 96-sec period and a 5-gamma rms amplitude, propagating in the dipole meridian at an angle of about 15 deg to the ambient field and the dipole axis. Proton flux modulation is found to lag the field by up to 180 deg for the lowest-energy channel. Observations are compared with the drift wave, MHD slow wave, and bounce resonant interaction associated with transverse wave models, and it is found that none of the wave models can adequately account for all of the correlated particle and field oscillations.

Su, S.-Y.↗

Short time Fourier analysis of the electromyogram - Fast movements and constant contraction

Short-time Fourier analysis was applied to surface electromyograms (EMG) recorded during rapid movements, and during isometric contractions at constant forces. A portion of the data to be transformed by multiplying the signal by a Hamming window was selected, and then the discrete Fourier transform was computed. Shifting the window along the data record, a new spectrum was computed each 10 ms. The transformed data were displayed in spectograms or 'voiceprints'. This short-time technique made it possible to see time-dependencies in the EMG that are normally averaged in the Fourier analysis of these signals. Spectra of EMGs during isometric contractions at constant force vary in the short (10-20 ms) term. Short-time spectra from EMGs recorded during rapid movements were much less variable. The windowing technique picked out the typical 'three-burst pattern' in EMG's from both wrist and head movements. Spectra during the bursts were more consistent than those during isometric contractions. Furthermore, there was a consistent shift in spectral statistics in the course of the three bursts. Both the center frequency and the variance of the spectral energy distribution grew from the first burst to the second burst in the same muscle. The analogy between EMGs and speech signals is extended to argue for future applicability of short-time spectral analysis of EMG.

Hannaford, Blake↗

On the analysis of clear air radar echoes severely contaminated by clutter

Many radar systems work in environments where clutter return overwhelm the atmospheric echoes. Sometimes by as much as 50 dB. At the Arecibo Observatory (AO), for example, clutter levels are conspicuously high. This situation greatly reduces its usefulness for lower atmospheric studies. It is not possible in general, to observe height profiles of the vertical component of the wind velocity. This parameter is important to understand planetary scale circulation, mountain and lee waves, turbulence, troprospheric and stratorspheric interactions and vertical transport of horizontal momentum. The topics discussed include the following: clutter propagation characteristics, knowledge-based spectral analysis system, and signal analysis system.

Ierkic, H. Mario↗

Spectral reflectance of selected aqueous solutions for water quality applications

The relative specular reflectances of individual aqueous solutions having a particular chemical salt content were measured in the 2 to 20 micrometers region of the infrared component or radiant flux. Distilled water was the reflectance standard. The angle of incidence was 70.03 deg plus or minus 0.23 deg. Absolute reflectances of the solutions for the same polarization and angle of incidence were computed by use of the measured relative reflectances, one of the Fresnel equations, and the optical constants of distilled water. Phase shift and phase difference spectra were obtained by respectively applying a Kramers-Kronig dispersion analysis to the absolute and relative reflectance spectra. The optical constants of the solutions were determined by algorithms commonly associated with the Kramers-Kronig analysis. Spectral signatures that qualitatively and quantitatively characterize the solute and that show structure of the infrared bands of water were noted in the phase difference spectra. The relative and absolute reflectances, the phase shift and phase difference spectra and the optical constants are presented in graphical form. Application of these results to remote sensing of the chemical quality of natural waters is discussed briefly.

Querr, M. R.↗

Study on spectral/radiometric characteristics of the Thematic Mapper for land use applications

Previous characterization of scan-related low-frequency noise was extended and refined through detailed analysis of shutter calibration data on CCT-ADDS tapes and reflective-band data from nighttime acquisitions. A recommended correction procedure was identified that uses calibration shutter data both as a diagnostic and to obtain correction values. Through comparison of coincident TM and MSS data, illustrations of the added information content of TM data for agricultural applications were developed. The capability of improved spatial resolution to better define boundaries and to resolve spatial details is shown. Spectral analysis of tasseled-cap transformations of TM and MSS data shows high correlation between greenness features, greater signal range for TM, and indications that a subset of TM bands could accurately simulate MSS data, if required.

Malila, W. A.↗