Search NASA⌕ Search

SEARCH · Search NASA

Results for “Standard Problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Low-Gain Circularly Polarized Antenna with Torus-Shaped Pattern

The Juno mission to Jupiter requires an antenna with a torus-shaped antenna pattern with approximately 6 dBic gain and circular polarization over the Deep Space Network (DSN) 7-GHz transmit frequency and the 8-GHz receive frequency. Given the large distances that accumulate en-route to Jupiter and the limited power afforded by the solar-powered vehicle, this toroidal low-gain antenna requires as much gain as possible while maintaining a beam width that could facilitate a +/-10deg edge of coverage. The natural antenna that produces a toroidal antenna pattern is the dipole, but the limited approx. = 2.2 dB peak gain would be insufficient. Here a shaped variation of the standard bicone antenna is proposed that could achieve the required gains and bandwidths while maintaining a size that was not excessive. The final geometry that was settled on consisted of a corrugated, shaped bicone, which is fed by a WR112 waveguide-to-coaxial- waveguide transition. This toroidal low-gain antenna (TLGA) geometry produced the requisite gain, moderate sidelobes, and the torus-shaped antenna pattern while maintaining a very good match over the entire required frequency range. Its "horn" geometry is also low-loss and capable of handling higher powers with large margins against multipactor breakdown. The final requirement for the antenna was to link with the DSN with circular polarization. A four-layer meander-line array polarizer was implemented; an approach that was fairly well suited to the TLGA geometry. The principal development of this work was to adapt the standard linear bicone such that its aperture could be increased in order to increase the available gain of the antenna. As one increases the aperture of a standard bicone, the phase variation across the aperture begins to increase, so the larger the aperture becomes, the greater the phase variation. In order to maximize the gain from any aperture antenna, the phase should be kept as uniform as possible. Thus, as the standard bicone fs aperture increases, the gain increase becomes less until one reaches a point of diminishing returns. In order to overcome this problem, a shaped aperture is used. Rather than the standard linear bicone, a parabolic bicone was found to reduce the amount of phase variation as the aperture increases. In fact, the phase variation is half of the standard linear bicone, which leads to higher gain with smaller aperture sizes. The antenna pattern radiated from this parabolic-shaped bicone antenna has fairly high side lobes. The Juno project requested that these sidelobes be minimized. This was accomplished by adding corrugations to the parabolic shape. This corrugated-shaped bicone antenna had reasonably low sidelobes, and the appropriate gain and beamwidth to meet project requirements.

Amaro, Luis R.↗

Use of human engineering standards in design

Results are presented for a research study intended to assess the impact of present human engineering standards on product design. The approach consisted of three basic steps: a comparison of two display panels to determine if, in fact, products designed to the same standards are truly standardized; a review of two existing standards to determine how well their information can be used to solve design problems; and a survey of human factors specialists to assess their opinions about standards. It is shown that standards have less than the desired influence on product design. This is evidenced by a lack of standardization between hardware designed under common standards, by deficiencies within the standards that detract from their usefulness and encourage users to ignore them, and by the respondents of the survey who consider standards less valuable than other reference sources for design implementation. Recommendations aimed at enhancing the use of standards are set forth.

Rogers, J. G.↗

Efficient Implementation of the Invariant Imbedding T-Matrix Method and the Separation of Variables Method Applied to Large Nonspherical Inhomogeneous Particles

Three terms, ''Waterman's T-matrix method'', ''extended boundary condition method (EBCM)'', and ''null field method'', have been interchangeable in the literature to indicate a method based on surface integral equations to calculate the T-matrix. Unlike the previous method, the invariant imbedding method (IIM) calculates the T-matrix by the use of a volume integral equation. In addition, the standard separation of variables method (SOV) can be applied to compute the T-matrix of a sphere centered at the origin of the coordinate system and having a maximal radius such that the sphere remains inscribed within a nonspherical particle. This study explores the feasibility of a numerical combination of the IIM and the SOV, hereafter referred to as the IIMþSOV method, for computing the single-scattering properties of nonspherical dielectric particles, which are, in general, inhomogeneous. The IIMþSOV method is shown to be capable of solving light-scattering problems for large nonspherical particles where the standard EBCM fails to converge. The IIMþSOV method is flexible and applicable to inhomogeneous particles and aggregated nonspherical particles (overlapped circumscribed spheres) representing a challenge to the standard superposition T-matrix method. The IIMþSOV computational program, developed in this study, is validated against EBCM simulated spheroid and cylinder cases with excellent numerical agreement (up to four decimal places). In addition, solutions for cylinders with large aspect ratios, inhomogeneous particles, and two-particle systems are compared with results from discrete dipole approximation (DDA) computations, and comparisons with the improved geometric-optics method (IGOM) are found to be quite encouraging.

Invariant imbedding method↗

Plane Smoothers for Multiblock Grids: Computational Aspects

Standard multigrid methods are not well suited for problems with anisotropic discrete operators, which can occur, for example, on grids that are stretched in order to resolve a boundary layer. One of the most efficient approaches to yield robust methods is the combination of standard coarsening with alternating-direction plane relaxation in the three dimensions. However, this approach may be difficult to implement in codes with multiblock structured grids because there may be no natural definition of global lines or planes. This inherent obstacle limits the range of an implicit smoother to only the portion of the computational domain in the current block. This report studies in detail, both numerically and analytically, the behavior of blockwise plane smoothers in order to provide guidance to engineers who use block-structured grids. The results obtained so far show alternating-direction plane smoothers to be very robust, even on multiblock grids. In common computational fluid dynamics multiblock simulations, where the number of subdomains crossed by the line of a strong anisotropy is low (up to four), textbook multigrid convergence rates can be obtained with a small overlap of cells between neighboring blocks.

Llorente, Ignacio M.↗

Options for Achieving Cost Reduction in Advanced Reactors through Open Architecture

A key contributor to high capital costs and schedule overruns for new nuclear power plants is lack of standardization, driven by site-specific customization and construction of multiple designs by competing vendors rather than commitment to a single standardized program. While advanced reactor vendors typically individually target repeat construction of standardized units, the many competing designs could exacerbate the problem. “Open Architecture”, the open specification of requirements and interfaces for structures, systems and components (SSCs), has been proposed as a means of promoting standardization, by facilitating existing non-nuclear suppliers to enter the industry and/or allowing SSCs to be configured for more than one reactor within the same technology type. Contracting mechanisms that facilitate information sharing and alignment of incentives between stakeholders may complement such an approach. A preliminary scheme is presented for selection of SSCs for which such strategies could be adopted, based on a vendor make/buy decision model and stakeholder interviews. SSCs are categorized according to number of suppliers and their contribution to the reactor’s competitive edge. SSCs with many potential suppliers and a high contribution to competitive edge may be attractive for widening the supply chain via open specification of system requirements and interfaces, e.g., SSCs in the power island. SSCs with few suppliers and low contribution to competitive edge may be potential avenues for common system specification between vendors, e.g., some of the auxiliary SSCs. Potential cost reductions from such strategies will depend upon the size of the build program and the reactor type.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Type 5 Wind Turbine Technology: How Synchronised, Synchronous Generation Avoids Uncertainties About Inverter Interoperability under IEEE 2800:2022

Degradation of system strength because of inverter-based resources (IBRs) is a major concern facing the zero-carbon transition. A new standard released this year, IEEE Standard 2800, attempts to codify the relationship between IBRs and the Transmission System Operator (TSO). It is apparent from IEEE 2800:2022 that there remain fundamental problems with quantifying whether source impedance (the measure of "system strength" with which the standard is concerned) will present a problem for allowing an IBR to connect. This is "because of complex interdependencies between IBR and power system characteristics". So developers are increasingly required to adopt mitigation options such as adding synchronous condensers or curtailing IBRs. A proven Type 5 (synchronous) wind turbine exists and has been running at 0.5 MW scale in a 46 MW wind farm in New Zealand since 2006 and eight turbines in Scotland since 2013. The US National Renewable Energy Laboratory (NREL) is conducting a study of the impacts on grid reliability, stability, and resilience of Type 5 wind turbines. The project has both simulation and testing tasks and will result in proposing a variable generation solution that will help system operators and utilities address all reliability and most resilience challenges in the evolving grid.

grid stability↗

Texture zeros in neutrino mass matrix

The Standard Model does not explain the hierarchy problem. Before the discovery of nonzero lepton mixing angle θ{sub 13} high hopes in explanation of the shape of the lepton mixing matrix were combined with non-Abelian symmetries. Nowadays, assuming one Higgs doublet, it is unlikely that this is still valid. Texture zeroes, that are combined with abelian symmetries, are intensively studied. The neutrino mass matrix is a natural way to study such symmetries.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Lepton number violation in theories with a large number of standard model copies

We examine lepton number violation (LNV) in theories with a saturated black hole bound on a large number of species. Such theories have been advocated recently as a possible solution to the hierarchy problem and an explanation of the smallness of neutrino masses. On the other hand, the violation of the lepton number can be a potential phenomenological problem of this N-copy extension of the standard model as due to the low quantum gravity scale black holes may induce TeV scale LNV operators generating unacceptably large rates of LNV processes. We show, however, that this issue can be avoided by introducing a spontaneously broken U{sub 1(B-L)}. Then, due to the existence of a specific compensation mechanism between contributions of different Majorana neutrino states, LNV processes in the standard model copy become extremely suppressed with rates far beyond experimental reach.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamic Resource Scheduling in Mobile Edge Cloud with Cloud Radio Access Network

Nowadays, by integrating the cloud radio access network (C-RAN) with the mobile edge cloud computing (MEC) technology, mobile service provider (MSP) can efficiently handle the increasing mobile traffic and enhance the capabilities of mobile devices. But the power consumption has become skyrocketing for MSP and it gravely affects the profit of MSP. Previous work often studied the power consumption in C-RAN and MEC separately while less work had considered the integration of C-RAN with MEC. In this paper, we present an unifying framework for the power-performance tradeoff of MSP by jointly scheduling network resources in C-RAN and computation resources in MEC to maximize the profit of MSP. To achieve this objective, we formulate the resource scheduling issue as a stochastic problem and design a new optimization framework by using an extended Lyapunov technique. Specially, because the standard Lyapunov technique critically assumes that job requests have fixed lengths and can be finished within each decision making interval, it is not suitable for the dynamic situation where the mobile job requests have variable lengths. To solve this problem, we extend the standard Lyapunov technique and design the VariedLen algorithm to make online decisions in consecutive time for job requests with variable lengths. Furthermore, our proposed algorithm can reach time average profit that is close to the optimum with a diminishing gap (1/V) for the MSP while still maintaining strong system stability and low congestion. With extensive simulations based on a real world trace, we demonstrate the efficacy and optimality of our proposed algorithm.

97 MATHEMATICS AND COMPUTING↗

Total quality management: It works for aerospace information services

Today we are in the midst of information and 'total quality' revolutions. At the NASA STI Program's Center for AeroSpace Information (CASI), we are focused on using continuous improvements techniques to enrich today's services and products and to ensure that tomorrow's technology supports the TQM-based improvement of future STI program products and services. The Continuous Improvements Program at CASI is the foundation for Total Quality Management in products and services. The focus is customer-driven; its goal, to identify processes and procedures that can be improved and new technologies that can be integrated with the processes to gain efficiencies, provide effectiveness, and promote customer satisfaction. This Program seeks to establish quality through an iterative defect prevention approach that is based on the incorporation of standards and measurements into the processing cycle. Four projects are described that utilize cross-functional, problem-solving teams for identifying requirements and defining tasks and task standards, management participation, attention to critical processes, and measurable long-term goals. The implementation of these projects provides the customer with measurably improved access to information that is provided through several channels: the NASA STI Database, document requests for microfiche and hardcopy, and the Centralized Help Desk.

Erwin, James↗

The neutron and its role in cosmology and particle physics

Experiments with cold and ultracold neutrons have reached a level of precision such that problems far beyond the scale of the present standard model of particle physics become accessible to experimental investigation. Because of the close links between particle physics and cosmology, these studies also permit a deep look into the very first instances of our Universe. First addressed in this article, in both theory and experiment, is the problem of baryogenesis, the mechanism behind the evident dominance of matter over antimatter in the Universe. The question of how baryogenesis could have happened is open to experimental tests, and it turns out that this problem can be curbed by the very stringent limits on an electric dipole moment of the neutron, a quantity that also has deep implications for particle physics. Then the recent spectacular observation of neutron quantization in the Earth's gravitational field and of resonance transitions between such gravitational energy states is discussed. These measurements, together with new evaluations of neutron scattering data, set new constraints on deviations from Newton's gravitational law at the picometer scale. Such deviations are predicted in modern theories with extra dimensions that propose unification of the Planck scale with the scale of the standard model. These experiments start closing the remaining ''axion window'' on new spin-dependent forces in the submillimeter range. Another main topic is the weak-interaction parameters in various fields of physics and astrophysics that must all be derived from measured neutron-decay data. Up until now, about 10 different neutron-decay observables have been measured, much more than needed in the electroweak standard model. This allows various precise tests for new physics beyond the standard model, competing with or surpassing similar tests at high energy. The review ends with a discussion of neutron and nuclear data required in the synthesis of the elements during the ''first three minutes'' and later on in stellar nucleosynthesis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Geophysical data analysis and visualization using the Grid Analysis and Display System

Several problems posed by the rapidly growing volume of geophysical data are described, and a selected set of existing solutions to these problems is outlined. A recently developed desktop software tool called the Grid Analysis and Display System (GrADS) is presented. The GrADS' user interface is a natural extension of the standard procedures scientists apply to their geophysical data analysis problems. The basic GrADS operations have defaults that naturally map to data analysis actions, and there is a programmable interface for customizing data access and manipulation. The fundamental concept of the GrADS' dimension environment, which defines both the space in which the geophysical data reside and the 'slice' of data which is being analyzed at a given time, is expressed The GrADS' data storage and access model is described. An argument is made in favor of describable data formats rather than standard data formats. The manner in which GrADS users may perform operations on their data and display the results is also described. It is argued that two-dimensional graphics provides a powerful quantitative data analysis tool whose value is underestimated in the current development environment which emphasizes three dimensional structure modeling.

Doty, Brian E.↗

The use of multi-objective optimization to improve the design process of nuclear power plant systems

Multi-objective optimization is proposed to address the problem of design optimality in the nuclear power plant design process. This is done via the creation/development of the Optimization and Preference Tool for the Improvement of Nuclear Systems (OPTIONS). This work details applications of multi-objective optimization methods (in Python 3) to two different nuclear system design problems: the flash-Rankine power conversion system (PCS) of the I 2 S-LWR and the Passive Endothermic Reaction Cooling System (PERCS) attached to a standard PWR primary system (in RELAP5). The PCS design problem is first solved for three configurations using a specific particle swarm optimization method, achieving a thermodynamic efficiency of 34.81%. A new method, the Mixed-Integer Non-dominated Sorting Genetic Algorithm (MI-NSGA), is created and then used, solving a PCS superstructure of 22 configurations and achieving an efficiency of 35.63%. Finally, the OPTIONS tool is used to optimize the PERCS, improving cost, core temperature control, and cooling longevity.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Optipack

Used to solve basic unconstrained optimization problems that can produce smooth accurate gradients. These are standard published unconstrained optimization such as are described in the book Nocedal and Wright Numerical Optimization: 2nd edition, 2006. This software is generic to any mathematical optimization problem where smooth derivatives exist. There is no specific connection or mention whatsoever to any specific application, period. You cannot find more general mathematical software.OptiPack contains some simple optimization algorithms built on Thyra. Currently, only a few different nonlinear conjugate gradient methods are implemented.

Bartlett, Roscoe↗

Optipack

Used to solve basic unconstrained optimization problems that can produce smooth accurate gradients. These are standard published unconstrained optimization such as are described in the book Nocedal and Wright Numerical Optimization: 2nd edition, 2006. This software is generic to any mathematical optimization problem where smooth derivatives exist. There is no specific connection or mention whatsoever to any specific application, period. You cannot find more general mathematical software.OptiPack contains some simple optimization algorithms built on Thyra. Currently, only a few different nonlinear conjugate gradient methods are implemented.

Bartlett, Roscoe↗

The Newton Modified Barrier Method for QP Problems

The Modified Barrier Functions (MBF) have elements of both Classical Lagrangians (CL) and Classical Barrier Functions (CBF). The MBF methods find an unconstrained minimizer of some smooth barrier function in primal space and then update the Lagrange multipliers, while the barrier parameter either remains fixed or can be updated at each step. The numerical realization of the MBF method leads to the Newton MBF method, where the primal minimizer is found by using Newton's method. This minimizer is then used to update the Lagrange multipliers. In this paper, we examine the Newton MBF method for the Quadratic Programming (QP) problem. It will be shown that under standard second-order optimality conditions, there is a ball around the primal solution and a cut cone in the dual space such that for a set of Lagrange multipliers in this cut cone, the method converges quadratically to the primal minimizer from any point in the aforementioned ball, and continues to do so after each Lagrange multiplier update. The Lagrange multipliers remain within the cut cone and converge linearly to their optimal values. Any point in this ball will be called a "hot start". Starting at such a "hot start", at most Omicron(1n 1n epsilon(exp -1)) Newton steps are sufficient to perform the primal minimization which is necessary for the Lagrange multiplier update. Here, epsilon > 0 is the desired accuracy. Because of the linear convergence of the Lagrange multipliers, this means that only Omicron(1n epsilon(exp -1))omicron(ln 1n epsilon(exp-1)) Newton steps are required to reach an epsilon-approximation to the solution from any "hot start". In order to reach the "hot start", one has to perform Omicron(square root(m) 1n C) Newton steps, where m characterizes the size of the problem and C > 0 is the condition number of the QP problem. This condition number will be characterized explicitly in terms of key parameters of the QP problem, which in turn depend on the input data and the size of the problem.

Melman, A.↗

PREFACE: A Search for Long-Lived Particles at the Large Hadron Collider

The Standard Model (SM) fails to explain many problems (neutrino masses, dark matter, and matter–antimatter asymmetry, among others) that may be resolved with new particles beyond the SM. No observation of such new particles may be explained either by their exceptionally high mass or by considerably small coupling to SM particles. The latter case implies relatively long lifetimes. Such long-lived particles (LLPs) then to have signatures different from those of SM particles. Searches in the “central region” are covered by the LHC general purpose experiments. The forward small angle region far from the interaction point (IP) is unexplored. Such particles are expected to have the energy as large as E = O(1 TeV) and Lorentz time dilation factor γ = E/m ≈ 10 2 –10 3 (with m the particle mass) hence long enough decay distances. A new class of specialized LHC detectors dedicated to LLP searches has been proposed for the forward regions. Among these experiments, FASER is already operational, and FACET is under consideration at a location 100 m from the LHC IP5 (the CMS detector intersection). However, some features of FACET require a specially enlarged beam pipe, which cannot be implemented for LHC Run 4. In this study, we explore a simplified version of the proposed detector PREFACE compatible with the standard LHC beam pipe in the HL-LHC Run 4. Realistic G EANT 4 simulations are performed and the background is evaluated. An initial analysis of the physics potential with the PREFACE geometry indicates that several significant channels could be accessible with sensitivities comparable to FACET and other LLP searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Efficient Multigrid Reduction-in-Time for Method-of-Lines Discretizations of Linear Advection

Parallel-in-time methods for partial differential equations (PDEs) have been the subject of intense development over recent decades, particularly for diffusion-dominated problems. It has been widely reported in the literature, however, that many of these methods perform quite poorly for advection-dominated problems. In this report we analyze the particular iterative parallel-in-time algorithm of multigrid reduction-in-time (MGRIT) for discretizations of constant-wave-speed linear advection problems. We focus on common method-of-lines discretizations that employ upwind finite differences in space and Runge-Kutta methods in time. Using a convergence framework we developed in previous work, we prove for a subclass of these discretizations that, if using the standard approach of rediscretizing the fine-grid problem on the coarse grid, robust MGRIT convergence with respect to CFL number and coarsening factor is not possible. This poor convergence and non-robustness is caused, at least in part, by an inadequate coarse-grid correction for smooth Fourier modes in space-time known as characteristic components. We propose an alternative coarse-grid operator that provides a better correction of these modes. This coarse-grid operator is related to previous work and uses a semi-Lagrangian discretization combined with an implicitly treated truncation error correction. Theory and numerical experiments show the proposed coarse-grid operator yields fast MGRIT convergence for many of the method-of-lines discretizations considered, including for both implicit and explicit discretizations of high order. Parallel results demonstrate speed-up over sequential time-stepping.

97 MATHEMATICS AND COMPUTING↗