Search NASA⌕ Search

SEARCH · Search NASA

Results for “Structural beams”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Surface modification of structural materials by low-energy high-current pulsed electron beam treatment

Microstructure formation in surface layers of pure titanium and ferritic-martensitic steel subjected to electron beam treatment is studied. It is shown that low energy high-current pulsed electron beam irradiation leads to the martensite structure within the surface layer of pure titanium. Contrary, the columnar ferrite grains grow during solidification of ferritic-martensitic steel. The effect of electron beam energy density on the surface morphology and microstructure of the irradiated metals is demonstrated.

36 MATERIALS SCIENCE↗

Multiple quasi-monoenergetic electron beams from laser-wakefield acceleration with spatially structured laser pulse

By adjusting the focus geometry of a spatially structured laser pulse, single, double, and treble quasi-monoenergetic electron beams were generated, respectively, in laser-wakefield acceleration. Single electron beam was produced as focusing the laser pulse to a single spot. While focusing the laser pulse to two spots that are approximately equal in energy and size and intense enough to form their own filaments, two electron beams were produced. Moreover, with a proper distance between those two focal spots, three electron beams emerged with a certain probability owing to the superposition of the diffractions of those two spots. The energy spectra of the multiple electron beams are quasi-monoenergetic, which are different from that of the large energy spread beams produced due to the longitudinal multiple-injection in the single bubble.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hybrid simulation of fishbone instabilities in the EAST tokamak

Hybrid simulations with the global kinetic-magnetohydrodynamic (MHD) code M3D-K have been carried out to investigate the linear stability and nonlinear dynamics of beam-driven fishbone in the experimental advanced superconducting tokamak (EAST) experiment. Linear simulations show that a low frequency fishbone instability is excited at experimental value of beam ion pressure. The mode is mainly driven by low energy beam ions via precessional resonance. Our results are consistent with the experimental measurement with respect to mode frequency and mode structure. When the beam ion pressure is increased to exceed a critical value, the low frequency mode transits to a beta-induced Alfven eigenmode (BAE) with much higher frequency. This BAE is driven by higher energy beam ions. Nonlinear simulations show that the frequency of the low frequency fishbone chirps up and down with corresponding hole-clump structures in phase space, consistent with the Berk-Breizman theory. In addition to the low frequency mode, the high frequency BAE is excited during the nonlinear evolution. Furthermore, for the transient case of beam pressure fraction where the low and high frequency modes are simultaneously excited in the linear phase, only one dominant mode appears in the nonlinear phase with frequency jumps up and down during nonlinear evolution.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Properties and features of structure formation CuCr-contact alloys in electron beam cladding

The microstructure and properties of the contact CuCr alloy produced by electron-beam cladding have been investigated. The effect of the electron beam cladding parameters and preheating temperature of the base metal on the structure and the properties of the coatings has been determined. The bimodal structure of the cladding coating has been established. The short circuit currents tests have been carried out according to the Weil-Dobke synthetic circuit simulating procedure developed for vacuum circuit breakers (VCB) test in real electric circuits. Test results have shown that the electron beam cladding (EBC) contact material has better breaking capacity than that of commercially fabricated sintered contact material. The application of the technology of electron beam cladding for production of contact material would significantly improve specific characteristics and reliability of vacuum switching equipment.

36 MATERIALS SCIENCE↗

Algebraic structure of general electromagnetic fields and energy flow

Highlights: > Algebraic structure of general electromagnetic fields in stationary spacetime. > Eigenvalues and eigenvectors of the electomagnetic field tensor. > Energy-momentum in terms of eigenvectors and Killing vector. > Explicit form of reference frame with vanishing Poynting vector. > Application of formalism to Bessel beams. - Abstract: The algebraic structures of a general electromagnetic field and its energy-momentum tensor in a stationary space-time are analyzed. The explicit form of the reference frame in which the energy of the field appears at rest is obtained in terms of the eigenvectors of the electromagnetic tensor and the existing Killing vector. The case of a stationary electromagnetic field is also studied and a comparison is made with the standard short-wave approximation. The results can be applied to the general case of a structured light beams, in flat or curved spaces. Bessel beams are worked out as example.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Endjoints For Structural Elements

Endjoint and connecting-node system designed for use in erection of frames. System structurally sound and simple to operate. All nodes and struts interchangeable. Nodes and struts attach to form cubic cell structures to produce beams, platforms, towers, or combinations of these. Design suitable for use in construction of space structures and such terrestrial skeletal frameworks as antenna-reflector supports, roof structures for large buildings, lookout towers, radio-transmitter towers, powerline pylons, and scaffolds.

Bush, Harold G.↗

Total internal reflection laser tools and methods

There is provided high power laser tools and laser heads that utilize total internal reflection ("TIR") structures to direct the laser beam along a laser beam path within the TIR structure. The TIR structures may be a TIR prism having its hypotenuse as a TIR surface.

36 MATERIALS SCIENCE↗

Space fabrication: Graphite composite truss welding and cap forming subsystems

An automated beam builder for the fabrication of space structures is described. The beam builder forms a triangular truss 1.3 meters on a side. Flat strips of preconsolidated graphite fiber fabric in a polysulfone matrix are coiled in a storage canister. Heaters raise the material to forming temperature then the structural cap section is formed by a series of rollers. After cooling, cross members and diagonal tension cords are ultrasonically welded in place to complete the truss. The stability of fabricated structures and composite materials is also examined.

Jenkins, L. M.↗

Proton beam power limits for stationary water-cooled tungsten target with different cladding materials

The proton beam power limit for a solid-tungsten spallation target is largely determined by beam induced thermomechanical structural loads and decay heat power deposition, while its lifetime is limited by radiation damage and fatigue life of the target materials. In this paper, we studied the power limits of a stationary water-cooled solid tungsten target concept. Tantalum clad tungsten was considered as a reference case. Being a low activation material, zircaloy 2 cladding option was studied and its decay heat driven power limit was compared with the reference case. Zirconium alloys have proven operations records in spallation target and nuclear fission environments, supported by materials data obtained from post irradiation examinations. Recent study also demonstrated feasibility of diffusion bonding zirconium to tungsten using vanadium foil inter layer. Particle transport simulations code FLUKA was used to calculate energy deposition and decay heat power deposition in the target, based on the beam parameters technically feasible at the Second Target Station of the Spallation Neutron Source at Oak Ridge National Laboratory. The energy deposition data were used for flow, thermal, and structural analyses to determine the beam intensity limit on the target concept studied. The decay heat deposition data were used to calculate the transient temperature evolution in the tungsten volumes in a loss of coolant accident (LOCA) scenario to determine its beam power limit. For a 1.3 GeV proton beam, the power limit on a stationary target was 400 kW for a tantalum clad target model and 800 kW for a zircaloy 2 clad target model.

Lee, Yong Joong↗

The feasibility of producing aluminum-lithium structures for cryogenic tankage applications by laser beam welding

Aluminum-lithium alloys exhibit high strength, high elastic modulus, and low density as well as excellent cryogenic mechanical properties making them ideal material candidates for cryogenic tanks. NASA has proposed the use of 'built-up' structure for panels fabricated into cryogenic tanks replacing current conventional machining. Superplastically formed stiffeners would be joined to sheet (tank skin) that had been roll formed to the radius of the tank in order to produce panels. Aluminum-lithium alloys of interest for producing the built-up structure include alloy 2095-T6 stiffeners to 2095-T8 sheet and alloy 8090-T6 stiffeners to 2090-T83 sheet. Laser welding, with comparable joint properties, offers the following advantages over conventional welding: higher production rates, minimal degradation within the heat affected zones, and full process automation. This study established process parameters for laser beam welding, mechanical property determinations, metallographic characterization, and fabrication of prototype panels. Tensile tests representing partial penetration of the skin alloys provided joint efficiencies between 65 and 77 percent, depending upon alloy and degree of penetration. Results of tension shear tests of lap welds indicated that the combination of 2095-T6 to 2090-T8 exhibited significantly higher weld shear strength at the interface in comparison to welds of 8090-T6 to 2090-T83. The increased shear strength associated with 2095 is believed to be due to the alloy's ability to precipitation strengthening (naturally age) after welding.

Martukanitz, R. P.↗

Growth of AlN/SiC/AlN quantum wells on Si(111) by molecular beam epitaxy

AlN/SiC/AlN quantum well structures have been grown on Si(111) by molecular beam epitaxy at 700 deg. C. The microstructure is single-crystal wurtzite AlN and cubic SiC with stacking sequence disorder. Depth profiles taken by Auger electron spectroscopy indicate that the ratio of Si to C is about 5:4. Layers with lower carbon content exhibit regions with five-fold superstructures. Fourier transform infrared spectroscopy confirms the presence of Al-N and Si-C bonds. Our work demonstrates the feasibility of a low-temperature synthesis route for epitaxial SiC and AlN/SiC heterostructures on Si.

36 MATERIALS SCIENCE↗

Dissipative Reactions with Intermediate-Energy Beams: A Novel Approach to Populate Complex-Structure States in Rare Isotopes

A novel pathway for the formation of multiparticle-multihole excited states in rare isotopes is reported from highly energy- and momentum-dissipative inelastic-scattering events measured in reactions of an intermediate-energy beam of 38 Ca on a Be target. The negative-parity, complex-structure final states in 38 Ca are observed following the in-beam γ-ray spectroscopy of events in the 9 Be( 38 Ca, 38 Ca + γ)X reaction in which the scattered projectile loses longitudinal momentum of order Δp || = 700 MeV/c. Here, the characteristics of the observed final states are discussed and found to be consistent with the formation of excited states involving the rearrangement of multiple nucleons in a single, highly energetic projectile-target collision. Unlike the far-less-dissipative, surface-grazing reactions usually exploited for the in-beam γ-ray spectroscopy of rare isotopes, these more energetic collisions appear to offer a practical pathway to nuclear-structure studies of more complex multiparticle configurations in rare isotopes—final states conventionally thought to be out of reach with high-luminosity fast-beam-induced reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Near-infrared emitting In-rich InGaN layers grown directly on Si: Towards the whole composition range

The authors report compact and chemically homogeneous In-rich InGaN layers directly grown on Si (111) by plasma-assisted molecular beam epitaxy. High structural and optical quality is evidenced by transmission electron microscopy, near-field scanning optical microscopy, and X-ray diffraction. Photoluminescence emission in the near-infrared is observed up to room temperature covering the important 1.3 and 1.55 μm telecom wavelength bands. The n-InGaN/p-Si interface is ohmic due to the absence of any insulating buffer layers. This qualitatively extends the application fields of III-nitrides and allows their integration with established Si technology.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-neutron knockout as a probe of the composition of states in Mg 22 , Al 23 , and Si 24

Simpson and Tostevin proposed that the width and shape of exclusive parallel momentum distributions of the A - 2 residue in direct two-nucleon knockout reactions carry a measurable sensitivity to the nucleon single-particle configurations and their couplings within the wave functions of exotic nuclei. We further report here on the first benchmarks and use of this new spectroscopic tool. Exclusive parallel momentum distributions for states in the neutron-deficient nuclei Mg 22 , Al 23 , and Si 24 populated in such direct two-neutron removal reactions were extracted and compared to predictions combining eikonal reaction theory and shell-model calculations. For the well-known Mg 22 and Al 23 nuclei, measurements and calculations were found to agree, supporting the dependence of the parallel momentum distribution width on the angular momentum composition of the shell-model two-neutron amplitudes. In Si 24 , a level at 3439(9) keV, of relevance for the important Al 23 ( p , γ ) Si 24 astrophysical reaction rate, was confirmed to be the 2 2 + state, whereas the 4 1 + state, expected to be strongly populated in two-neutron knockout, was not observed. This puzzle is resolved by theoretical considerations of the Thomas-Ehrman shift, which also indicates that a previously reported 3471-keV state in Si 24 is, in fact, the ( 0 2 + ) level with one of the largest experimental mirror-energy shifts ever observed.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Accuracy analysis of the semi-analytical method for shape sensitivity calculation

The semianalytical method, widely used for calculating derivatives of static response with respect to design variables for structures modeled by finite elements, is studied in this paper. The paper shows that the method can have serious accuracy problems for shape design variables in structures modeled by beam, plate, truss, frame, and solid elements. The errors are shown to be associated with the structural model. An error index is developed to test the accuracy of the semianalytical method. It characterizes the difference in errors between a general finite-difference method and the semianalytical method. Moreover, a method for improving the accuracy of the semianalytical method (when possible) is provided. Examples are presented to demonstrate the use of the error index.

Barthelemy, Bruno↗

Experimental generation of longitudinally-modulated electron beams using an emittance exchange technique

We report our experimental demonstration of longitudinal phase space modulation using a transverse-to-longitudinal emittance exchange technique. The experiment is carried out at the A0 photoinjector at Fermi National Accelerator Lab. A vertical multi-slit plate is inserted into the beamline prior to the emittance exchange, thus introducing beam horizontal profile modulation. After the emittance exchange, the longitudinal phase space coordinates (energy and time structures) of the beam are modulated accordingly. This is a clear demonstration of the transverse-to-longitudinal phase space exchange. In this paper, we present our experimental results on the measurement of energy profile as well as numerical simulations of the experiment.

43 PARTICLE ACCELERATORS↗

Generic Structural Elements

This research concentrated on improving beam theories as applicable to composite structures. Confirmation is sought for analytical predictions using a new beam theory based on the assumption that cross-sections of the beam are infinitely rigid in their own plane, but free to warp out-of-plane, of these analytical predictions were sought during the current reporting.

Source record↗

A 0.14 THz relativistic coaxial overmoded surface wave oscillator with metamaterial slow wave structure

This paper presents a new kind of device for generating the high power terahertz wave by using a coaxial overmoded surface wave oscillator with metamaterial slow wave structure (SWS). A metallic metamaterial SWS is used to avoid the damage of the device driven by a high-voltage electron beam pulse. The overmoded structure is adopted to make it much easy to fabricate and assemble the whole device. The coaxial structure is used to suppress the mode competition in the overmoded device. Parameters of an electron beam and geometric structure are provided. Particle-in-cell simulation results show that the high power terahertz wave at the frequency of 0.14 THz is generated with the output power 255 MW and conversion efficiency about 21.3%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗