Search NASA⌕ Search

SEARCH · Search NASA

Results for “Temperature estimation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

A data-driven analysis of the heavy quark transport coefficient

Using a Bayesian model-to-data analysis, we estimate the temperature dependence of the heavy quark diffusion coefficients by calibrating to the experimental data of D-meson R AA and v 2 in AuAu collisions ($\sqrt{s}$NN = 200 GeV) and PbPb collisions ($\sqrt{s}$NN = 2.76 TeV) [1]. The spatial diffusion coefficient D s 2πT is found to be mostly constraint around (1.3 1.5)T c and is compatible with lattice QCD calculations. Here we demonstrate the capability of our improved Langevin model to simultaneously describe the R AA and v 2 at both RHIC and the LHC energies, as well as the feasibility to apply a Bayesian analysis to quantitatively study the heavy flavor transport in heavy-ion collisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Polyethylene in Dead-End Silica Nanopores: Forces and Mobility from Non-Equilibrium Statistical Mechanics and Exchange Spectroscopy Nuclear Magnetic Resonance

Billions of tons of plastic have been produced, and only a small fraction of this has been recycled. Tennakoon et al. [Nature Catalysis 3, 893 (2020)] developed a catalyst that repeatedly cleaves C 10 –C 30 hydrocarbons from the end of a polyethylene chain. The reaction occurs at a Pt nanoparticle at the base of a cylindrical silica mesopore with a diameter of 2 nm and a length of 110 nm. Portions of the polymer situated inside the pore can be differentiated from those outside using 13 C nuclear magnetic resonance (NMR), allowing the dynamics and extent of polymer threading to be monitored using two-dimensional (2D) exchange spectroscopy NMR. Here we construct a Fokker–Planck equation for the polymer dynamics by assuming a reptation diffusivity and a graduated adsorption free energy that depends linearly on the depth of polymer penetration in the pore. The solutions allow us to predict the intensities of the 2D NMR resonances as a function of time. We use the solutions to extract a polymer diffusivity at each temperature and estimate the per-segment desorption free energy, enthalpy, and entropy. Random and systematic errors are examined to test key assumptions in the theory and interpretation of the experiments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal Structure and Superconductivity of PH 3 at High Pressures

Here, we performed systematic structure search on solid PH 3 at high pressures using particle swarm optimization method. Furthermore, at 100-200 GPa, the search led to two structures consisting of P-P bonds that different from these predicted for H 2 S. Phonon and electron-phonon calculations indicate both structures are dynamically stable and superconductive. Particularly, the estimated critical temperature for the monoclinic (C2/m) phase of 83 K at 200 GPa is in excellent agreement with a recent experimental report.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

X-ray Free Electron Laser-Induced Synthesis of ε -Iron Nitride at High Pressures

The ultrafast synthesis of ε-Fe 3 N 1+x in a diamond-anvil cell (DAC) from Fe and N 2 under pressure was observed using serial exposures of an X-ray free electron laser (XFEL). When the sample at 5 GPa was irradiated by a pulse train separated by 443 ns, the estimated sample temperature at the delay time was above 1400 K, confirmed by in situ transformation of α- to γ-iron. Ultimately, the Fe and N 2 reacted uniformly throughout the beam path to form Fe 3 N 1.33 , as deduced from its established equation of state (EOS). We thus demonstrate that the activation energy provided by intense X-ray exposures in an XFEL can be coupled with the source time structure to enable exploration of the time-dependence of reactions under high-pressure conditions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Density Functional Theory Study of Controllable Optical Absorptions and Magneto-Optical Properties of Magnetic CrI 3 Nanoribbons: Implications for Compact 2D Magnetic Devices

A chromium triiodide (CrI 3 ) monolayer has an interesting ferromagnetic ground-state. In this work, we calculate band structures and magnetic moments of tensile-strained and bent zigzag CrI 3 nanoribbons with density functional theory. The edge iodine atoms form flat low-lying conduction bands and couple with chromium atoms ferromagnetically, while the non-edge iodine atoms weakly couple antiferromagnetically. Narrow CrI 3 nanoribbons have two locally stable magnetic moment orientations, namely out-of-plane and in-plane (along the nanoribbon periodic direction) configurations. This enables four magnetization states in CrI 3 nanoribbons, including two out-of-plane ones (up and down) and two in-plane ones (forward and backward along the nanoribbon periodical direction), increasing the operating controllability. Based on the one-dimensional Ising spin chain model, the spin correlation length of the narrow CrI 3 nanoribbon is estimated as about 10 Å at its estimated Curie temperature of 27 Kelvin, which is lower than the measured 45 Kelvin of the monolayer CrI 3 . The optical absorption and magneto-optical properties of CrI 3 nanoribbons are investigated with many-body perturbation GW-BSE (Bethe-Salpeter equation), including magnetic dichroism, Faraday and magneto-optical Kerr effects. Here, the low-energy dark excitons are mainly from transitions between electrons and holes with unlike spins and are non-Frenkel-like, while the bright excitons have mixed spin configurations. The intrinsic lifetime of excitons can be over one nanosecond, suitable for quantum information processes. Tensile strains and bending manifestly modulate the absorption spectra and magneto-optical properties of CrI 3 nanoribbons within a technologically important photon energy-range of ~1.0-2.0 eV. The CrI 3 nanoribbons can be used in 1D or 2D magnetic storage nanodevices, tunable magnetic optoelectronics, and spin-based quantum information controls.

36 MATERIALS SCIENCE↗

Enthalpy of Formation for Cu–Zn–Sn–S (CZTS) Calculated from Surface Binding Energies Experimentally Measured by Ion Sputtering

Herein, we report an analytical procedure to calculate the enthalpy of formation for thin film multinary compounds from sputtering rates measured during ion bombardment. The method is based on Sigmunds sputtering theory and the BornHaber cycle. Using this procedure, an enthalpy of formation for a CZTS film of the composition Cu1.9Zn1.5Sn0.8S4 was measured as -930 +/- 98 kJ mol1. This value is much more negative than the sum of the enthalpies of formation for the constituent binary compounds, meaning the multinary formation reaction is predicted to be exothermic. The measured enthalpy of formation was used to estimate the temperature dependence of the Gibbs free energy of reaction, which appears consistent with many experimental reports in the CZTS processing literature.

Baryshev, Sergey V.↗

Tensile Strain Switched Ferromagnetism in Layered NbS2 and NbSe2

Developing approaches to effectively induce and control the magnetic states is critical to the use of magnetic nanostructures in quantum information devices but is still challenging. Here we have demonstrated, by employing the density functional theory calculations, an existence of infinite magnetic sheets with structural integrity and magnetic homogeneity. Examination from a series of transition metal dichalcogenides shows that the biaxial tensile strained NbS2 and NbSe2 structures can be magnetized with a ferromagnetic character due to the competitive effects of through-bond interaction and through-space interaction. The estimated Curie temperatures (387 and 542 K under the 10% strain for NbS2 and NbSe2 structures, respectively) suggest that the unique ferromagnetic character can be achieved above room temperature. The self-exchange of population between 4d orbitals of Nb atom that leads to the exchange splitting is the mechanism behind the transition of the spin moment. The induced magnetic moments can be significantly enhanced by the tensile strain, even giving rise to half-metallic character with the strong spin polarization around the Fermi level. Given the recent progress that the desired strain can be achieved on two-dimensional nanostructures, such as graphene and BN layer in a controlled way, we believe that our calculated results are suitable for experimental verification and implementation opening a new path to explore the spintronics in pristine two-dimensional nanostructures.

biaxial strain↗

Tracking Physicochemical Conditions of Evaporite Deposition by Stable Magnesium Isotopes: A Case Study of Late Permian Langbeinites

Magnesium isotopic compositions of evaporite deposits may record information concerning brine evolution during deposition. We report Mg isotopic values (δ 26 MgDSM3) measured from an evaporite deposit of langbeinite (K 2 Mg 2 (SO 4 ) 3 ) found in the Permian Salado Formation. We used these data to model Mg isotope fractionation between langbeinite and its parent brine. In addition, both measured and theoretical results are used to estimate precipitation temperature and interpret depositional environment. The Salado langbeinite δ 26 Mg values are relatively low and fall within a relatively narrow range (–4.12 ± 0.03‰ to -3.81 ± 0.07‰). Equilibrium fractionation factors between langbeinite and aqueous Mg 2+ solutions were calculated using quantum chemical density functional theory. All computations were performed at the B3LYP/6-31 + G(d,p) level. Solvation effects were addressed using a solvent model (“water-droplet” approach) and mineral structures were investigated using volume variable cluster models (VVCM). The equilibrium Mg isotopic fractionation factors α between langbeinite and model brine solution we obtained are 1.0005, 1.0004, and 1.0003 (Δ 26 Mg langb-water ≈10 3 lnα = 0.473‰, 0.390‰, and 0.322‰) at 10°C, 25°C, and 40°C, respectively. These relatively large equilibrium fractionation factors indicate significant Mg isotope fractionation between langbeinite and its parent brine during precipitation, as langbeinite preferentially incorporates the heavier 26 Mg and 25 Mg isotopes. Rayleigh distillation modeling of the Salado langbeinite's relatively light Mg isotopic composition requires δ 26 Mg DSM3 values of -4‰ for the parent brine. Models favor a precipitation temperature as high as 40°C under equilibrium conditions. Finally, potential disequilibrium precipitation conditions suggested by Mg isotopic data also imply rapid deposition in a hot, arid sedimentary environment prevailing in the southwestern U.S. during the Late Permian.

58 GEOSCIENCES↗

Thermodynamics of free and bound magnons in graphene

Symmetry-broken electronic phases support neutral collective excitations. For example, monolayer graphene in the quantum Hall regime hosts a nearly ideal ferromagnetic phase at specific filling factors that spontaneously breaks the spin-rotation symmetry. This ferromagnet has been shown to support spin-wave excitations known as magnons that can be electrically generated and detected. Although long-distance magnon propagation has been demonstrated via transport measurements, important thermodynamic properties of such magnon populations—including the magnon chemical potential and density—have not been measured. Here we present local measurements of electron compressibility under the influence of magnons, which reveal a reduction in the gap associated with the ν = 1 quantum Hall state by up to 20%. Combining these measurements with the estimates of temperature, our analysis reveals that the injected magnons bind to electrons and holes to form skyrmions, and it enables the extraction of free magnon density, magnon chemical potential and average skyrmion spin. Our methods provide a means of probing the thermodynamic properties of charge-neutral excitations that are applicable to other symmetry-broken electronic phases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Historical total ozone radiative forcing derived from CMIP6 simulations

Radiative forcing (RF) time series for total ozone from 1850 up to the present day are calculated based on historical simulations of ozone from 10 climate models contributing to the Coupled Model Intercomparison Project Phase 6 (CMIP6). In addition, RF is calculated for ozone fields prepared as an input for CMIP6 models without chemistry schemes and from a chemical transport model simulation. A radiative kernel for ozone is constructed and used to derive the RF. The ozone RF in 2010 (2005–2014) relative to 1850 is 0.35 W m -2 [0.08–0.61] (5–95% uncertainty range) based on models with both tropospheric and stratospheric chemistry. One of these models has a negative present-day total ozone RF. Excluding this model, the present-day ozone RF increases to 0.39 W m -2 [0.27–0.51] (5–95% uncertainty range). The rest of the models have RF close to or stronger than the RF time series assessed by the Intergovernmental Panel on Climate Change in the fifth assessment report with the primary driver likely being the new precursor emissions used in CMIP6. The rapid adjustments beyond stratospheric temperature are estimated to be weak and thus the RF is a good measure of effective radiative forcing.

54 ENVIRONMENTAL SCIENCES↗

Heterotrophic respiration by soil microbes in a changing climate

Soil microbes strongly influence the soil organic carbon (SOC) pool, which globally stores ~2,000 PgC. Specifically, the balance between microbial heterotrophic respiration (R H ), which degrades SOC, and plant–microbe interactions that stabilize SOC determines whether terrestrial ecosystems are a net source or sink of CO 2 to the atmosphere. Here, in this Review, we evaluate how climate change alters these competing processes. R H is approximately half of total soil respiration, at ~50 PgC yr −1 , with 70% occurring in topsoils. Warming accelerates microbial metabolism, with a 10 °C temperature increase estimated to raise R H by ~50%, an effect that is particularly strong in Arctic soils. Warming also reduces soil moisture, further modulating R H , which responds nonlinearly to soil moisture, being limited by saturation and desiccation and meeting a maximum at intermediate levels. Consequently, R H is highly sensitive to future precipitation changes and drought. However, soil management strategies could enhance SOC stocks and persistence under climate change. Bacterial and fungal inoculants can promote SOC production and stabilization, while deep-rooting plants increase SOC inputs to deeper layers that experience lower R H . Agricultural practices and biochar amendments can also enhance SOC and reduce R H . Expanding field trials across regions, climates and soil types would improve empirical understanding of these responses and support better representation of R H in predictive models, enabling more accurate assessments of climate impacts on SOC storage.

Jansson, Janet K. [Pacific Northwest National Labo↗

Formation of Stoichiometric CsFn Compounds

Alkali halides MX, have been viewed as typical ionic compounds, characterized by 1:1 ratio necessary for charge balance between M1 and X2. It was proposed that group I elements like Cs can be oxidized further under high pressure. Here we perform a comprehensive study for the CsF-F system at pressures up to 100 GPa, and find extremely versatile chemistry. A series of CsFn (n $ 1) compounds are predicted to be stable already at ambient pressure. Under pressure, 5p electrons of Cs atoms become active, with growing tendency to form Cs (III) and (V) valence states at fluorine-rich conditions. Although Cs (II) and (IV) are not energetically flavoured, the interplay between two mechanisms (polyfluoride anions and polyvalent Cs cations) allows CsF2 and CsF4 compounds to be stable under pressure. The estimated defluorination temperatures of CsFn (n52,3,5) compounds at atmospheric pressure (2186C, 1506C, -156C, respectively), are attractive for fluorine storage applications.

36 MATERIALS SCIENCE↗

SN 2006oz: rise of a super-luminous supernova observed by the SDSS-II SN Survey

We study SN 2006oz, a newly-recognized member of the class of H-poor, super-luminous supernovae. We present multi-color light curves from the SDSS-II SN Survey, that cover the rise time, as well as an optical spectrum that shows that the explosion occurred at z~0.376. We fitted black body functions to estimate the temperature and radius evolution of the photosphere and used the parametrized code SYNOW to model the spectrum. We constructed a bolometric light curve and compared it with explosion models. The very early light curves show a dip in the g- and r-bands and a possible initial cooling phase in the u-band before rising to maximum light. The bolometric light curve shows a precursor plateau with a duration of 6-10 days in the rest-frame. A lower limit of M_u < -21.5 can be placed on the absolute peak luminosity of the SN, while the rise time is constrained to be at least 29 days. During our observations, the emitting sphere doubled its radius to 2x10^15 cm, while the temperature remained hot at 15000 K. As for other similar SNe, the spectrum is best modeled with elements including O II and Mg II, while we tentatively suggest that Fe III might be present. We suggest that the precursor plateau might be related to a recombination wave in a circumstellar medium (CSM) and discuss whether this is a common property of all similar explosions. The subsequent rise can be equally well described by input from a magnetar or by ejecta-CSM interaction, but the models are not well constrained owing to the lack of post-maximum observations, and CSM interaction has difficulties accounting for the precursor plateau self-consistently. Radioactive decay is less likely to be the mechanism that powers the luminosity. The host galaxy, detected in deep imaging with the 10 m GTC, is a moderately young and star-forming, but not a starburst, galaxy. It has an absolute magnitude of M_g = -16.9.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermal Evolution of Isolated Neutron Stars: Pairing, Pairing, and Pairing

The thermal evolution of young isolated neutron stars is driven by neutrino emission from matter at the highest densities reached in their inner core. As such, these objects are direct probes of the structure of matter at supranuclear density. However, pairing of the neutrino emitting baryons, or quarks, can significantly alter their emission efficiency and the predicted thermal evolution is very sensitive to assumptions about gap size(s). After a brief description of these physical processes, I compare with present observational data models of cooling neutron stars driven by slow or fast neutrino emission. Depending on the assumed size of the neutron {sup 3}P{sub 2}-{sup 3}F{sub 2} gap, a minimal model of neutron stars can accommodate all present data, with the exception of the cold pulsar J0007.0+7303 in the supernova remnant CTA 1. However, in case this gap is vanishingly small or very large, the estimated surface temperatures of more than a half of the observed young cooling neutron stars would imply the intervention of some form of enhanced neutrino emission. Unfortunately, the present uncertainty on the size of the neutron {sup 3}P{sub 2}-{sup 3}F{sub 2} gap precludes us to draw any definitive conclusion about the state of dense matter from the sole study of isolated neutron stars.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Finite element simulation for ultraviolet excimer laser processing of patterned Si/SiGe/Si(100) heterostructures

Ultraviolet (UV) Excimer laser assisted processing is an alternative strategy for producing patterned silicon germanium heterostructures. We numerically analyzed the effects caused by pulsed 193 Excimer laser radiation impinging on patterned amorphous hydrogenated silicon (a-Si:H) and germanium (a-Ge:H) bilayers deposited on a crystalline silicon substrate [Si(100)]. The proposed two dimensional axisymmetric numerical model allowed us to estimate the temperature and concentration gradients caused by the laser induced rapid melting and solidification processes. Energy density dependence of maximum melting depth and melting time evolution as well as three dimensional temperature and element distribution have been simulated and compared with experimentally obtained results.

36 MATERIALS SCIENCE↗

Direct measurement of energetic electron flow in Q-shu University experiment with steady-state spherical tokamak

In magnetized plasmas, the presence of a significant number of energetic electrons has been observed but quantitative characteristics of these electrons are proving difficult to investigate. A Langmuir probe offers a means to provide quantitative measurement of these energetic electrons that takes into account electron emissions (secondary electron emission and electron reflection) from the probe tips and sheath expansion around the probe tips caused by a considerable negative potential. In this paper, these effects are experimentally confirmed and an analytical means to measure energetic electron characteristics are proposed. An analysis of plasmas produced by a high frequency wave is then applied leading to the successful detection of an asymmetric flow of energetic electrons. The estimated electron temperature and current density were approximately 4-5 keV and 2-3 kA/m{sup 2}.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Superconducting and magneto-transport properties of BiS{sub 2} based superconductor PrO{sub 1-x}F{sub x}BiS{sub 2} (x = 0 to 0.9)

We report superconducting properties of PrO{sub 1-x}F{sub x}BiS{sub 2} compounds, synthesized by the vacuum encapsulation technique. The synthesized PrO{sub 1-x}F{sub x}BiS{sub 2} (x = 0.1, 0.3, 0.5, 0.7, and 0.9) samples are crystallized in a tetragonal P4/nmm space group. Both transport and DC magnetic susceptibility measurements showed bulk superconductivity below 4 K. The maximum T{sub c} is obtained for x = 0.7 sample. Under applied magnetic field, both T{sub c}{sup onset} and T{sub c} (ρ = 0) decrease to lower temperatures. We estimated highest upper critical field [H{sub c2}(0)] for PrO{sub 0.3}F{sub 0.7}BiS{sub 2} sample to be above 4 T (Tesla). The thermally activated flux flow activation energy (U{sub 0}) is estimated 54.63 meV in 0.05 T field for PrO{sub 0.3}F{sub 0.7}BiS{sub 2} sample. Hall measurement results showed that electron charge carriers are the dominating ones in these compounds. Thermoelectric effects (Thermal conductivity and Seebeck coefficient) data suggest strong electron-electron correlations in this material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Looking for footprint of bulk metallic glass in electronic and phonon heat capacities of Cu{sub 55}Hf{sub 45−x}Ti{sub x} alloys

We report on the heat capacity investigation of Cu{sub 55}Hf{sub 45−x}Ti{sub x} metallic glasses. The most appropriate procedure to estimate low temperature electronic and phonon contributions has been determined. Both contributions exhibit monotonous Ti concentration dependence, demonstrating that there is no relation of either the electron density of states at the Fermi level or the Debye temperature to the increased glass forming ability in the Ti concentration range x = 15–30. The thermodynamic parameters (e.g., reduced glass temperature) remain better indicators in assessing the best composition for bulk metallic glass formation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗