Search NASA⌕ Search

SEARCH · Search NASA

Results for “ULTRAVIOLET SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Photoabsorption and photoionization of N2 near the first ionization threshold

The photoabsorption and photoionization spectra of molecular nitrogen, N2, near the first ionisation threshold display numerous intense resonances that have not been satisfactorily assigned to date. Principal among these is a pair of broad resonances between 126,200 and 126,600 cm−1 commonly referred to as the ”cathedral” bands. Here, we present new double-resonance photoionization spectra in this region recorded via the 𝑎′′ 1Σ+ 𝑔,𝑣′=0 intermediate state as well as new high-resolution, vacuum-ultraviolet photoabsorption spectra of 14N2,14N15N, and 15N2 to provide additional insight into the assignment of these features. Progress towards a fully consistent interpretation of the existing data on these bands is discussed, and a route towards a comprehensive description of the N2 absorption spectrum up to the 𝐵 2Σ+ 𝑢 state of N+ 2 is proposed.

Nitrogen, vacuum ultraviolet absorption, photoioni↗

Microfluidic Fabrication of Nanoparticles Based on Ethyl Acrylate-Functionalized Chitosan for Adsorption of Methylene Blue from Aqueous Solutions

The adsorption of nanoparticle (NP)-based adsorbents especially those made of polymers to remove dyes as toxic substances from pollutants is yet remained as a critical issue. The objective of this work was to prepare microfluidic (MF) fabrication of NPs based on ethyl acrylate (EA)-functionalized chitosan (CS) for methylene blue (MB) dye removal from aqueous solutions. For this purpose, a series of experiments such as FTIR, SEM alongside DLS, and UV–vis spectrophotometry were carried out to investigate the physicochemical properties of the samples. The FTIR spectra showed that the amine (–NH{sub 2}) and hydroxyl (–OH) groups on CS structure were replaced with EA, appropriately. The SEM and DLS results depicted that EA-functionalized CS NPs fabricated using MF technique had uniform shapes, and the diameters as small as 70 nm compared to those samples produced via bulk mixing (BM) method (~ 300 nm). Moreover, the surface charge of MF-assisted CS NPs after functionalization exhibited the lower zeta potential value (~ + 11) than that of samples based on BM (~ + 14) due to occurring the laminar flow through the micro-channels embedded in the MF chip, leading to an increase in the MB adsorption. Subsequently, at the optimized amounts of the dye concentration (89.12 mg L{sup −1}), the adsorbent concentration (1.38 g L{sup −1}), and pH (10.58) by means of Box-Behnken design (BBD) method, the maximum percentage of MB removal by the use of MF-fabricated EA-functionalized CS NPs was 98.4%. By fitting the obtained adsorption data to the isotherm models such as Lagmuir, Freundlich, and Temkin, it has been found that the adsorption mechanism followed the Langmuir model (maximum capacity of the adsorption 384.61 mg/g), which assumed a monolayer coverage of MB molecules as adsorbates over a homogeneous adsorbent surface.

36 MATERIALS SCIENCE↗

Enhanced photocatalytic activities of TiO2-reduced graphene oxide nanocomposites controlled by TiOC interfacial chemical bond

Highlights: • A series TiO{sub 2}-reduced graphene oxide (RG) nanocomposites were prepared by hydrothermal methods at different temperature. • The photocatalytic performance of TiO{sub 2}-RG was illustrated by a TiOC interfacial chemical bond. • The photocatalytic properties were investigated by UV–vis test and degrading Rhodamine B. • The results revealed that the nanocomposites obtained at 120 °C possessed the optimum photocatalytic performance. - Abstract: In this study, a hydrothermal-prepared TiO{sub 2}-RG nanocomposites series exhibited excellent photocatalytic activities, of which the results can be largely influenced by a TiOC interfacial chemical bond between TiO{sub 2} nanoparticles and RG nanosheets. A stirring TiO{sub 2}-RG sample was prepared as contrast analysis using the same wet process except for heating. The characteristics of the composites were tested by X-ray diffraction (XRD), Raman, FT-IR, Differential scanning calorimetry (DSC), Thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) analysis. The photocatalytic properties were verified by UV–vis diffuse reflectance spectra (DRS) testing as well as degrading Rhodamine B (RhB). Our research results show that the better TiOC interfacial chemical bond was formed, the narrower band gap of the nanocomposite was then obtained. The best hydrothermal synthesizing temperature was found out as 120 °C. The TiO{sub 2}-RG nanocomposite, as inexpensive, nontoxic and highly photo-catalytically active, may let it have a potential use in various photocatalytic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Size-effects on the optical properties of zirconium oxide thin films

Zirconium oxide (ZrO{sub 2}) thin films with an average crystallite-size (L) ranging from 5 to 25 nm were grown by sputter deposition onto optical grade quartz substrates. The optical properties of grown ZrO{sub 2} films were evaluated using optical transmission and reflectance spectroscopic measurements. The size-effects were significant on the optical characteristics of ZrO{sub 2} films. The bandgap energy (E{sub g}) was found to increase from 5.78 to 6.07 eV with decreasing L values from 20 to 7 nm. A direct, linear inverse L-E{sub g} relationship found for ZrO{sub 2} films suggest that tuning optical properties for desired applications can be achieved by controlling the size.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

One-photon band gap engineering of borate glass doped with ZnO for photonics applications

Lithium tungsten borate glass of the composition (0.56-x)B{sub 2}O{sub 3}-0.4Li{sub 2}O-xZnO-0.04WO{sub 3} (0 {<=}x{<=} 0.1 mol. %) is prepared for photonics applications. The glass is doped with ZnO to tune the glass absorption characteristics in a wide spectrum range (200-2500 nm). Chemical bond approach, including chemical structure, electronegativity, bond ionicity, nearest-neighbor coordination, and other chemical bonding aspect, is used to analyze and to explain the obtained glass properties such as: transmittance, absorption, electronic structure parameters (bandgap, Fermi level, and Urbach exciton-phonon coupling), Wannier free excitons excitation (applying Elliott's model), and two-photon absorption coefficient as a result of replacement of B{sub 2}O{sub 3} by ZnO.

36 MATERIALS SCIENCE↗

Optical studies on Eu{sup 3+} doped boro-tellurite glasses

Eu{sup 3+} doped boro-tellurite glasses with the chemical composition (39-x)B{sub 2}O{sub 3}+30TeO{sub 2}+15MgO+15K{sub 2}O +xEu{sub 2}O{sub 3} (where x = 0.01, 0.1, 1, 2 and 3 wt%) have been prepared by following conventional melt quenching technique. Spectroscopic properties of the Eu{sup 3+} doped boro-tellurite glasses have been studied by recording the optical absorption and luminescence measurements. Through the optical absorption spectra, bonding parameters ({beta}-bar, {delta}) have been calculated to identify the ionic/covalent nature of the glasses. Judd-Ofelt (JO) analysis have been carried out using the luminescence spectra. The JO parameters ({Omega}{sub {lambda}}= 2, 4 and 6) were used to calculate the radiative properties for the {sup 5}D{sub 0}{yields}{sup 7}F{sub J} (J = 1, 2, 3 and 4) emission transitions of the Eu{sup 3+} ions. The change in optical properties with the variation of Eu{sup 3+} ion concentration have been studied and discussed with similar studies.

36 MATERIALS SCIENCE↗

Band gap tunability of molecular beam epitaxy grown lateral composition modulated GaInP structures by controlling V/III flux ratio

Lateral composition modulated (LCM) GaInP structures were grown on (001) GaAs substrate by molecular beam epitaxy with different V/III flux ratios. Band gap of LCM structures could be tuned from 1.93 eV to 1.83 eV by decreasing flux ratio while maintaining the same photoluminescence intensity, enhanced light absorption, and widened absorption spectrum. It is shown that for band gap tuning of LCM structures, flux ratio adjustment is a more viable method compared to growth temperature adjustment.

36 MATERIALS SCIENCE↗

Optical contrast and laser-induced phase transition in GeCu{sub 2}Te{sub 3} thin film

Fast crystallization and low power amorphization are essential to achieve rapid data recording and low power consumption in phase-change memory. This work investigated the laser-induced phase transition behaviors of GeCu{sub 2}Te{sub 3} film based on the reflectance of amorphous and crystalline states. The GeCu{sub 2}Te{sub 3} film showed a reflectance decrease upon crystallization, which was the opposite behavior in Ge{sub 2}Sb{sub 2}Te{sub 5} film. The crystallization starting time of the as-deposited GeCu{sub 2}Te{sub 3} film was as fast as that of the as-deposited Ge{sub 2}Sb{sub 2}Te{sub 5} film. Furthermore, the GeCu{sub 2}Te{sub 3} crystalline film was found to be reamorphized by laser irradiation at lower power and shorter pulse width than the Ge{sub 2}Sb{sub 2}Te{sub 5}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Local network structure of a-SiC:H and its correlation with dielectric function

The microscopic disordered structures of hydrogenated amorphous silicon carbide (a-Si{sub 1−x}C{sub x}:H) layers with different carbon contents have been determined based on the correlations between the dielectric function in the ultraviolet/visible region and the local bonding states studied by high-sensitivity infrared attenuated total reflection spectroscopy. We find that the microscopic structure of the a-Si{sub 1−x}C{sub x}:H layers fabricated by plasma-enhanced chemical vapor deposition shows a sharp structural transition at a boundary of x = 6.3 at. %. In the regime of x ≤ 6.3 at. %, (i) the amplitude of the a-SiC:H dielectric function reduces and (ii) the SiH{sub 2} content increases drastically with x, even though most of the C atoms are introduced into the tetrahedral sites without bonding with H. In the regime of x > 6.3 at. %, on the other hand, (i) the amplitude of the dielectric function reduces further and (ii) the concentration of the sp{sup 3} CH{sub n} (n = 2,3) groups increases. Moreover, we obtained the direct evidence that the sp{sup 2} C bonding state in the a-SiC matrix exists in the configuration of C = CH{sub 2} and the generation of the graphite-like C = CH{sub 2} unit suppresses the band gap widening significantly. At high C contents of x > 6.3 at. %, the a-SiC:H layers show quite porous structures due to the formation of microvoids terminated with the SiH{sub 2}/CH{sub n} groups. By taking the SiH{sub 2}/CH{sub n} microvoid generation in the network and the high-energy shift of the dielectric function by the local bonding states into account, the a-SiC:H dielectric function model has been established. From the analysis using this model, we have confirmed that the a-SiC:H optical properties in the ultraviolet/visible region are determined almost completely by the local network structures.

36 MATERIALS SCIENCE↗

UV absorption spectrum of the C2 Criegee intermediate CH{sub 3}CHOO

The UV spectrum of CH{sub 3}CHOO was measured by transient absorption in a flow cell at 295 K. The absolute absorption cross sections of CH{sub 3}CHOO were measured by laser depletion in a molecular beam to be (1.06 ± 0.09) × 10{sup −17} cm{sup 2} molecule{sup −1} at 308 nm and (9.7 ± 0.6) × 10{sup −18} cm{sup 2} molecule{sup −1} at 352 nm. After scaling the UV spectrum of CH{sub 3}CHOO to the absolute cross section at 308 nm, the peak UV cross section is (1.27 ± 0.11) × 10{sup −17} cm{sup 2} molecule{sup −1} at 328 nm. Compared to the simplest Criegee intermediate CH{sub 2}OO, the UV absorption band of CH{sub 3}CHOO is similar in intensity but blue shifted by 14 nm, resulting in a 20% slower photolysis rate estimated for CH{sub 3}CHOO in the atmosphere.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CHEMICAL PROCESSES IN PROTOPLANETARY DISKS. II. ON THE IMPORTANCE OF PHOTOCHEMISTRY AND X-RAY IONIZATION

We investigate the impact of photochemistry and X-ray ionization on the molecular composition of, and ionization fraction in, a protoplanetary disk surrounding a typical T Tauri star. We use a sophisticated physical model, which includes a robust treatment of the radiative transfer of UV and X-ray radiation, and calculate the time-dependent chemical structure using a comprehensive chemical network. In previous work, we approximated the photochemistry and X-ray ionization; here, we recalculate the photoreaction rates using the explicit UV wavelength spectrum and wavelength-dependent reaction cross sections. We recalculate the X-ray ionization rate using our explicit elemental composition and X-ray energy spectrum. We find that photochemistry has a larger influence on the molecular composition than X-ray ionization. Observable molecules sensitive to the photorates include OH, HCO{sup +}, N{sub 2}H{sup +}, H{sub 2}O, CO{sub 2}, and CH{sub 3}OH. The only molecule significantly affected by the X-ray ionization is N{sub 2}H{sup +}, indicating that it is safe to adopt existing approximations of the X-ray ionization rate in typical T Tauri star-disk systems. The recalculation of the photorates increases the abundances of neutral molecules in the outer disk, highlighting the importance of taking into account the shape of the UV spectrum in protoplanetary disks. A recalculation of the photoreaction rates also affects the gas-phase chemistry due to the adjustment of the H/H{sub 2} and C{sup +}/C ratios. The disk ionization fraction is not significantly affected by the methods adopted to calculate the photochemistry and X-ray ionization. We determine that there is a probable 'dead zone' where accretion is suppressed, present in a layer, Z/R {approx}< 0.1-0.2, in the disk midplane, within R Almost-Equal-To 200 AU.

79 ASTRONOMY AND ASTROPHYSICS↗

RECONSTRUCTING THE {gamma}-RAY PHOTON OPTICAL DEPTH OF THE UNIVERSE TO z {approx} 4 FROM MULTIWAVELENGTH GALAXY SURVEY DATA

We reconstruct the {gamma}-ray opacity of the universe out to z {approx}< 3-4 using an extensive library of 342 observed galaxy luminosity function (LF) surveys extending to high redshifts. We cover the whole range from UV to mid-IR (0.15-25 {mu}m) providing for the first time a robust empirical calculation of the {gamma}{gamma} optical depth out to several TeV. Here, we use the same database as Helgason et al. where the extragalactic background light was reconstructed from LFs out to 4.5 {mu}m and was shown to recover observed galaxy counts to high accuracy. We extend our earlier library of LFs to 25 {mu}m such that it covers the energy range of pair production with {gamma}-rays (1) in the entire Fermi/LAT energy range, and (2) at higher TeV energies probed by ground-based Cherenkov telescopes. In the absence of significant contributions to the cosmic diffuse background from unknown populations, such as the putative Population III era sources, the universe appears to be largely transparent to {gamma}-rays at all Fermi/LAT energies out to z {approx} 2 whereas it becomes opaque to TeV photons already at z {approx}< 0.2 and reaching {tau} {approx} 10 at z = 1. Comparing with the currently available Fermi/LAT gamma-ray burst and blazar data shows that there is room for significant emissions originating in the first stars era.

79 ASTRONOMY AND ASTROPHYSICS↗

Jet signatures in the spectra of accreting black holes

Jets are observed as radio emission in active galactic nuclei and during the low/hard state in X-ray binaries (XRBs), but their contribution at higher frequencies has been uncertain. We study the dynamics of jets in XRBs using the general-relativistic magnetohydrodynamic code HARM. We calculate the high-energy spectra and variability properties using a general-relativistic radiative transport code based on grmonty. We find the following signatures of jet emission: (i) a significant γ-ray peak above ∼10{sup 22} Hz, (ii) a break in the optical/UV spectrum, with a change from νL{sub ν}∼ν{sup 0} to νL{sub ν}∼ν, followed by another break at higher frequencies where the spectrum roughly returns to νL{sub ν}∼ν{sup 0}, and (iii) a pronounced synchrotron peak near or below ∼10{sup 14} Hz indicates that a significant fraction of any observed X-ray emission originates in the jet. We investigate the variability during a large-scale magnetic field inversion in which the Blandford–Znajek (BZ) jet is quenched and a new transient hot reconnecting plasmoid is launched by the reconnecting field. The ratio of the γ-rays to X-rays changes from L{sub γ}/L{sub X}>1 in the BZ jet to L{sub γ}/L{sub X}<1 during the launching of the transient plasmoid.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultraviolet spectroscopy of R Coronae Borealis

Observations of the hydrogen-deficient supergiant R CrB were obtained with the IUE over an interval of 54 days in order to study the nature of this star's irregular, small-amplitude variations in light. By chance, the series of observations coincided with a dip in the light intermediate between the normal fluctuations and the deep declines associated with the formation of an obscuring dust cloud. High-resolution spectra have been used to search for radial velocity variations, while low-resolution spectra yield ultraviolet light curves down to 1810 A. Both types of spectra have been analyzed for indications of temperature changes. It is found that a combination of photospheric temperature variation and variable extinction is necessary to account for the details of the observations. A simple, ad hoc, periodic model is presented in which the amount of obscuring dust varies in proportion to the drop in temperature, but at a later time, reproduces the wavelength dependence of both the amplitudes and phase shifts of the light curves. The radial velocities are consistent with pulsation being responsible for the temperature variation.

Holm, A. V.↗

Bixbyite- and anatase-type phases in the system Sc-Ta-O-N

The aim of our study was to modify the basis compound ss-TaON, which crystallizes in the monoclinic baddeleyite-type, by incorporation of appropriate dopant ions, in order to obtain anion-deficient cubic fluorite-type phases, which are of interest as solids with mobile nitrogen ions. For this purpose, scandium-doped tantalum oxide nitrides were prepared by ammonolysis of amorphous oxide precursors. An unexpected variety of phases with different structural features was observed: bixbyite-type phases of general composition Sc{sub x}Ta{sub 1-x}(O,N){sub y} with 0.33{<=}x{<=}1 and 1.7{<=}y{<=}1.9, yellow colored metastable anatase-type phases such as Sc{sub 0.1}Ta{sub 0.9}O{sub 1.2}N{sub 0.8} or Sc{sub 0.15}Ta{sub 0.85}O{sub 1.3}N{sub 0.7} and, additionally, anosovite-type phases Sc{sub x}Ta{sub 3-x}O{sub 2x}N{sub 5-2x} with 0{<=}x{<=}1.05. Selected phases were investigated by UV/vis spectroscopy. Anatase- and anosovite-type compounds show brilliant colors. In the anatase-type phase, a possible anion ordering was examined by theoretical methods. Additionally, energy calculations on phase stability were performed for Sc{sub x}Ta{sub 1-x}O{sub 1+2x}N{sub 1-2x} in the baddeleyite, rutile, and anatase structure types with varying amounts of dopants. - Graphical abstract: New anatase- and bixbyite-type phases obtained as single-phase samples in the system Sc-Ta-O-N.

36 MATERIALS SCIENCE↗

Syntheses, crystal structures and optical spectroscopy of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O

The lanthanide sulphate octahydrates Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and the respective tetrahydrate Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O were obtained by evaporation of aqueous reaction mixtures of trivalent rare earth oxides and sulphuric acid at 300 K. Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) crystallise in space group C2/c (Z=4, a{sub Ho}=13.4421(4) A, b{sub Ho}=6.6745(2) A, c{sub Ho}=18.1642(5) A, {beta}{sub Ho}=102.006(1) A{sup 3} and a{sub Tm}=13.4118(14) A, b{sub Tm}=6.6402(6) A, c{sub Tm}=18.1040(16) A, {beta}{sub Tm}=101.980(8) A{sup 3}), Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O adopts space group P2{sub 1}/n (a=13.051(3) A, b=7.2047(14) A, c=13.316(3) A, {beta}=92.55(3) A{sup 3}). The vibrational and optical spectra of Ho{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O are also reported. -- Graphical abstract: In the lanthanide sulphate octahydrates the cations form slightly undulated layers. Between the layers are voids in which sulphate tetrahedra and water molecules are located. The holmium compound exhibits an Alexandrite effect. Display Omitted Highlights: {yields} Determination of the optimum conditions for the growth of single-crystals of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O. {yields} Single-crystal structure elucidation of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) including hydrogen bonds. {yields} Single-crystal structure determination of Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O including hydrogen bonds. {yields} UV-vis spectra of Ho{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O recorded and interpreted: Assignation of bands and clarification of the Alexandrite effect of the Ho compound. {yields} IR and Raman spectra of Ln{sub 2}(SO{sub 4}){sub 3}.8H{sub 2}O (Ln=Ho, Tm) and Pr{sub 2}(SO{sub 4}){sub 3}.4H{sub 2}O recorded and interpreted.

36 MATERIALS SCIENCE↗

Structural and optical studies of yttrium oxide nanoparticles synthesized by co-precipitation method

Yttrium oxide (yttria) nanoparticles were successfully synthesized by co-precipitation method. As-synthesized and annealed powders were characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), UV-visible (UV-vis), photoluminescence (PL) spectra and Fourier transform infrared spectrometer (FTIR). The XRD results show that the as-prepared sample has mixed phase of Y(OH){sub 3} and yttria (Y{sub 2}O{sub 3}). However, cubic yttrium oxide phase alone is found for annealed samples. The strain values are calculated from Williamson-Hall (W-H) plot for annealed samples. SEM and TEM micrographs show that the samples are composed of aggregated nanoparticles with different shapes and sizes. From the UV-vis spectra, it is found that the position of the absorption peak is shifted towards the lower wavelength side when particle size decreases. In the PL spectra, the broad emission bands are observed between 340 and 380 nm and the presence of metal oxide is confirmed by FTIR spectra.

36 MATERIALS SCIENCE↗

Monodisperse In{sub 2}O{sub 3} nanoparticles synthesized by a novel solvothermal method with In(OH){sub 3} as precursors

Highlights: • Monodisperse In{sub 2}O{sub 3} nanoparticles were synthesized by a novel solvothermal method. • The particle size of In{sub 2}O{sub 3} nanoparticles is ultrafine, ∼5 nm. • The precursor is readily available. • It is free of any surfactant and template. • The possible growth mechanism, delayed burst nucleation, are elucidated. - Abstract: A novel solvothermal method has been developed for monodisperse In{sub 2}O{sub 3} nanoparticles (NPs) with ∼5 nm particle size, In(OH){sub 3} as precursors and free of any surfactant and template. The NPs were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), energy-dispersive X-ray spectrum (EDS) and Fourier transform infrared spectrum (FT-IR). The temperature, the concentration of precursors and washing conditions dramatically affected the structure, morphology and size of NPs. The possible growth mechanism was elucidated as well, which was delayed burst nucleation. A weak quantum confinement effect of In{sub 2}O{sub 3} NPs resulting from the small particle size was observed in UV spectrum and one photoluminescence emission peak occurring in the visible region was detected as well.

77 NANOSCIENCE AND NANOTECHNOLOGY↗