Search NASA⌕ Search

SEARCH · Search NASA

Results for “VECTOR PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Polarization studies of Zeeman affected spectral lines using the MSFC magnetograph

The Marshall Space Flight Center (MSFC) vector magnetograph records polarization images of absorption lines that are sensitive to magnetic fields. A method is presented for analyzing the Stokes spectral-line profiles of a photospheric Fe I absorption line (5250.2 A) which is influenced by the Zeeman effect. Using nonlinear least-square optimization, the observed Stokes profiles are compared with those generated from the theoretical solution of the polarized radiative transfer equations. The optimization process accounts for the spectral convolution of the source and the MSFC vector magnetograph. The resulting physical properties of the active region producing the polarized light are discussed.

Balasubramaniam, K. S.↗

An Algorithm for Converting Static Earth Sensor Measurements into Earth Observation Vectors

An algorithm has been developed that converts penetration angles reported by Static Earth Sensors (SESs) into Earth observation vectors. This algorithm allows compensation for variation in the horizon height including that caused by Earth oblateness. It also allows pitch and roll to be computed using any number (greater than 1) of simultaneous sensor penetration angles simplifying processing during periods of Sun and Moon interference. The algorithm computes body frame unit vectors through each SES cluster. It also computes GCI vectors from the spacecraft to the position on the Earth's limb where each cluster detects the Earth's limb. These body frame vectors are used as sensor observation vectors and the GCI vectors are used as reference vectors in an attitude solution. The attitude, with the unobservable yaw discarded, is iteratively refined to provide the Earth observation vector solution.

Harman, R.↗

Core Stage TVC Systems Engineering Challenges in Reusing Heritage Hardware

The Space Launch System (SLS) Core Stage (CS) Thrust Vector Control (TVC) system is comprised of 8 mechanical feedback Shuttle heritage Type III TVC actuators and four RS-25 engines, each attached to a Shuttle heritage gimbal block/bearing. Two actuators are used to move each engine in two planes perpendicular to one another (i.e., pitch and yaw). The TVC system design leverages hardware from the Space Shuttle program as well as new hardware designed specifically for the Core Stage. The Space Shuttle heritage hardware directly reused on SLS includes the Orbiter TVC hydraulic servo-actuators (with two slight design modifications), the Orbiter hydraulic circulation pumps, the Orbiter gimbal block/bearing, and the Solid Rocket Booster hydraulic pumps. The Core Auxiliary Power Unit (CAPU) is derived from the Orbiter Auxiliary Power Unit (APU). The Orbiter and Solid Rocket Booster APU turbines are powered by hot gas produced by catalyzed hydrazine decomposition. On the SLS Core Stage, the CAPU turbine is spun using cold gas tapped-off from the RS-25 to CS liquid hydrogen autogenous pressurization line. While direct reuse or slight modification of existing hardware may seem to be a triple-win for a program in cost, schedule, and technical risk mitigation, those benefits can only be realized when its degree of application in a new system is carefully and thoughtfully managed. The heritage hardware reuse should be prescribed within the heritage design capability and reuse environments must lie within the envelope of heritage qualification testing. Despite the significant test and flight experience of the Shuttle heritage hardware components, successful integration with the newly designed CS TVC components and incorporation into the stage design proved to be a challenge which required re-qualification of the heritage hardware as well as thorough integrated testing to support flight certification. Examples of the challenges that were overcome include: re-qualifying heritage hardware to survive new shock and vibration environments, certifying performance of extensively modified heritage hardware, regenerating design insight due to lack of available heritage vendor data, showing compliance to modern structural design standards, translation of heritage requirements for analog avionics to modern digital avionics, and interfacing heritage mechanical hardware with newly designed avionics. This paper is the second installment in a seven-paper series surveying the design, engineering, test validation, and flight performance of the Core Stage Thrust Vector Control system. This paper will discuss several engineering challenges encountered during the development process for SLS CS TVC and how they were successfully overcome to reach flight readiness.

Thrust Vector Control↗

Space Launch System: Core Stage Thrust Vector Control Systems Engineering Challenges in Reusing Heritage Hardware

The Space Launch System (SLS) Core Stage (CS) Thrust Vector Control (TVC) system is comprised of 8 mechanical feedback Shuttle heritage Type III TVC actuators and four RS-25 engines, each attached to a Shuttle heritage gimbal block/bearing. Two actuators are used to move each engine in two planes perpendicular to one another (i.e., pitch and yaw). The TVC system design leverages hardware from the Space Shuttle program as well as new hardware designed specifically for the Core Stage. The Space Shuttle heritage hardware directly reused on SLS includes the Orbiter TVC hydraulic servo-actuators (with two slight design modifications), the Orbiter hydraulic circulation pumps, the Orbiter gimbal block/bearing, and the Solid Rocket Booster hydraulic pumps. The Core Auxiliary Power Unit (CAPU) is derived from the Orbiter Auxiliary Power Unit (APU). The Orbiter and Solid Rocket Booster APU turbines are powered by hot gas produced by catalyzed hydrazine decomposition. On the SLS Core Stage, the CAPU turbine is spun using cold gas tapped-off from the RS-25 to CS liquid hydrogen autogenous pressurization line. While direct reuse or slight modification of existing hardware may seem to be a triple-win for a program in cost, schedule, and technical risk mitigation, those benefits can only be realized when its degree of application in a new system is carefully and thoughtfully managed. The heritage hardware reuse should be prescribed within the heritage design capability and reuse environments must lie within the envelope of heritage qualification testing. Despite the significant test and flight experience of the Shuttle heritage hardware components, successful integration with the newly designed CS TVC components and incorporation into the stage design proved to be a challenge which required re-qualification of the heritage hardware as well as thorough integrated testing to support flight certification. Examples of the challenges that were overcome include: re-qualifying heritage hardware to survive new shock and vibration environments, certifying performance of extensively modified heritage hardware, regenerating design insight due to lack of available heritage vendor data, showing compliance to modern structural design standards, translation of heritage requirements for analog avionics to modern digital avionics, and interfacing heritage mechanical hardware with newly designed avionics. This paper is the second installment in a seven-paper series surveying the design, engineering, test validation, and flight performance of the Core Stage Thrust Vector Control system. This paper will discuss several engineering challenges encountered during the development process for SLS CS TVC and how they were successfully overcome to reach flight readiness.

Thrust Vector Control↗

Space Shuttle propulsion parameter estimation using optimal estimation techniques, volume 1

The mathematical developments and their computer program implementation for the Space Shuttle propulsion parameter estimation project are summarized. The estimation approach chosen is the extended Kalman filtering with a modified Bryson-Frazier smoother. Its use here is motivated by the objective of obtaining better estimates than those available from filtering and to eliminate the lag associated with filtering. The estimation technique uses as the dynamical process the six degree equations-of-motion resulting in twelve state vector elements. In addition to these are mass and solid propellant burn depth as the ""system'' state elements. The ""parameter'' state elements can include aerodynamic coefficient, inertia, center-of-gravity, atmospheric wind, etc. deviations from referenced values. Propulsion parameter state elements have been included not as options just discussed but as the main parameter states to be estimated. The mathematical developments were completed for all these parameters. Since the systems dynamics and measurement processes are non-linear functions of the states, the mathematical developments are taken up almost entirely by the linearization of these equations as required by the estimation algorithms.

Source record↗

Stochastic Vector Techniques in Ground-State Electronic Structure

Herein we review a suite of stochastic vector computational approaches for studying the electronic structure of extended condensed matter systems. These techniques help reduce algorithmic complexity, facilitate efficient parallelization, simplify computational tasks, accelerate calculations, and diminish memory requirements. While their scope is vast, we limit our study to ground-state and finite temperature density functional theory (DFT) and second-order many-body perturbation theory. More advanced topics, such as quasiparticle (charge) and optical (neutral) excitations and higher-order processes, are covered elsewhere. We start by explaining how to use stochastic vectors in computations, characterizing the associated statistical errors. Next, we show how to estimate the electron density in DFT and discuss effective techniques to reduce statistical errors. Finally, we review the use of stochastic vectors for calculating correlation energies within the second-order Møller-Plesset perturbation theory and its finite temperature variational form. Example calculation results are presented and used to demonstrate the efficacy of the methods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A New Suite of Plasmid Vectors for Fluorescence-Based Imaging of Root Colonizing Pseudomonads

In the terrestrial ecosystem, plant-microbe symbiotic associations are ecologically and economically important processes. To better understand these associations at structural and functional levels, different molecular and biochemical tools are applied. In this study, we have constructed a suite of vectors that incorporates several new elements into the rhizosphere stable, broad-host vector pME6031. The new vectors are useful for studies requiring multi-color tagging and visualization of plant-associated, Gram negative bacterial strains such as Pseudomonas plant growth promotion and biocontrol strains. A number of genetic elements, including constitutive promoters and signal peptides that target secretion to the periplasm, have been evaluated. Several next generation fluorescent proteins, namely mTurquoise2, mNeonGreen, mRuby2, DsRed-Express2 and E2-Crimson have been incorporated into the vectors for whole cell labeling or protein tagging. Secretion of mTurquoise2 and mNeonGreen into the periplasm of Pseudomonas fluorescens SBW25 has also been demonstrated, providing a vehicle for tagging proteins in the periplasmic compartment. A higher copy number version of select plasmids has been produced by introduction of a previously described repA mutation, affording an increase in protein expression levels. The utility of these plasmids for fluorescence-based imaging is demonstrated by root colonization of Solanum lycopersicum seedlings by P. fluorescens SBW25 in a hydroponic growth system. As a result, the plasmids are stably maintained during root colonization in the absence of selective pressure for more than two weeks.

59 BASIC BIOLOGICAL SCIENCES↗

On the Hilbert-Huang Transform Data Processing System Development

One of the main heritage tools used in scientific and engineering data spectrum analysis is the Fourier Integral Transform and its high performance digital equivalent - the Fast Fourier Transform (FFT). The Fourier view of nonlinear mechanics that had existed for a long time, and the associated FFT (fairly recent development), carry strong a-priori assumptions about the source data, such as linearity and of being stationary. Natural phenomena measurements are essentially nonlinear and nonstationary. A very recent development at the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC), known as the Hilbert-Huang Transform (HHT) proposes a novel approach to the solution for the nonlinear class of spectrum analysis problems. Using the Empirical Mode Decomposition (EMD) followed by the Hilbert Transform of the empirical decomposition data (HT), the HHT allows spectrum analysis of nonlinear and nonstationary data by using an engineering a-posteriori data processing, based on the EMD algorithm. This results in a non-constrained decomposition of a source real value data vector into a finite set of Intrinsic Mode Functions (IMF) that can be further analyzed for spectrum interpretation by the classical Hilbert Transform. This paper describes phase one of the development of a new engineering tool, the HHT Data Processing System (HHTDPS). The HHTDPS allows applying the "T to a data vector in a fashion similar to the heritage FFT. It is a generic, low cost, high performance personal computer (PC) based system that implements the HHT computational algorithms in a user friendly, file driven environment. This paper also presents a quantitative analysis for a complex waveform data sample, a summary of technology commercialization efforts and the lessons learned from this new technology development.

Kizhner, Semion↗

Modeling Stochastic Variability in Multiband Time-series Data

In preparation for the era of time-domain astronomy with upcoming large-scale surveys, we propose a state-space representation of a multivariate damped random walk process as a tool to analyze irregularly-spaced multifilter light curves with heteroscedastic measurement errors. We adopt a computationally efficient and scalable Kalman filtering approach to evaluate the likelihood function, leading to maximum O(k 3 n) complexity, where k is the number of available bands and n is the number of unique observation times across the k bands. This is a significant computational advantage over a commonly used univariate Gaussian process that can stack up all multiband light curves in one vector with maximum O(k 3 n 3 ) complexity. Using such efficient likelihood computation, we provide both maximum likelihood estimates and Bayesian posterior samples of the model parameters. Three numerical illustrations are presented: (i) analyzing simulated five-band light curves for a comparison with independent single-band fits; (ii) analyzing five-band light curves of a quasar obtained from the Sloan Digital Sky Survey Stripe 82 to estimate short-term variability and timescale; (iii) analyzing gravitationally lensed g- and r-band light curves of Q0957+561 to infer the time delay. Two R packages, Rdrw and timedelay, are publicly available to fit the proposed models.

79 ASTRONOMY AND ASTROPHYSICS↗

Distributed Data-Flow for In-Situ Visualization and Analysis at Petascale

We conducted a feasibility study to research modifications to data-flow architectures to enable data-flow to be distributed across multiple machines automatically. Distributed data-flow is a crucial technology to ensure that tools like the VisIt visualization application can provide in-situ data analysis and post-processing for simulations on peta-scale machines. We modified a version of VisIt to study load-balancing trade-offs between light-weight kernel compute environments and dedicated post-processing cluster nodes. Our research focused on memory overheads for contouring operations, which involves variable amounts of generated geometry on each node and computation of normal vectors for all generated vertices. Each compute node independently decided whether to send data to dedicated post-processing nodes at each stage of pipeline execution, depending on available memory. We instrumented the code to allow user settable available memory amounts to test extremely low-overhead compute environments. We performed initial testing of this prototype distributed streaming framework, but did not have time to perform scaling studies at and beyond 1000 compute-nodes.

97 MATHEMATICS AND COMPUTING↗

Fractured Boer-Mulders effect in the production of polarized baryons

The fractured Boer-Mulders functions, {Delta}{sup N}M{sub B{up_arrow}/(q,q){up_arrow}:p}{sup q}(x,p{sub TN};z,p-vector{sub T{center_dot}}k-vector{sub T};Q{sup 2}), describe an intriguing class of polarization effects for the production of baryons in the target fragmentation region of deep-inelastic processes. These functions characterize transverse momentum asymmetries related to the spin orientation for different flavors of axial-vector diquarks,(q{sub i},q{sub j}){up_arrow}, in an unpolarized ensemble of protons just as the familiar Boer-Mulders functions characterize transverse momentum asymmetries connected to the spin orientation of quarks in unpolarized targets. The asymmetries in p{sub TN} of the fractured Boer-Mulders effect originating in the proton distribution function can be separated kinematically, both in semi-inclusive deep-inelastic scattering and in the Drell-Yan process, from the asymmetries in k{sub TN} of the polarizing fracture functions, {Delta}{sup N}M{sub B{up_arrow}/(q,q):p}{sup q}(x,p{sub T}{sup 2};z,k{sub TN};Q{sup 2}), generated during the soft color rearrangement of the fragmentation process. The experimental requirements for this separation are presented in this article and it is shown that the fractured Boer-Mulders effect should change sign between Drell-Yan and semi-inclusive deep-inelastic scattering while the polarizing fracture functions remain the same. Simple isospin arguments indicate the two polarization mechanisms should give significantly different results for the production of polarized {Lambda}'s and {Sigma}'s.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using support vector machines for anomalous change detonation

We cast anomalous change detection as a binary classification problem, and use a support vector machine (SVM) to build a detector that does not depend on assumptions about the underlying data distribution. To speed up the computation, our SVM is implemented, in part, on a graphical processing unit. Results on real and simulated anomalous changes are used to compare performance to algorithms which effectively assume a Gaussian distribution. In this paper, we investigate the use of support vector machines (SVMs) with radial basis kernels for finding anomalous changes. Compared to typical applications of SVMs, we are operating in a regime of very low false alarm rate. This means that even for relatively large training sets, the data are quite meager in the regime of operational interest. This drives us to use larger training sets, which in turn places more of a computational burden on the SVM. We initially considered three different approaches to to address the need to work in the very low false alarm rate regime. The first is a standard SVM which is trained at one threshold (where more reliable estimates of false alarm rates are possible) and then re-thresholded for the low false alarm rate regime. The second uses the same thresholding approach, but employs a so-called least squares SVM; here a quadratic (instead of a hinge-based) loss function is employed, and for this model, there are good theoretical arguments in favor of adjusting the threshold in a straightforward manner. The third approach employs a weighted support vector machine, where the weights for the two types of errors (false alarm and missed detection) are automatically adjusted to achieve the desired false alarm rate. We have found in previous experiments (not shown here) that the first two types can in some cases work well, while in other cases they do not. This renders both approaches unreliable for automated change detection. By contrast, the third approach reliably produces good results, but at the cost of larger computational requirements caused by the need to estimate very small false alarm rates. To address these computational requirements, we employ a recently developed in-house solver for SVMs that is significantly faster than freely available standard solvers. But these computational issues are secondary to the larger question: do kernelized solutions provide better performance, in terms of detection rates and false alarm rates, than more traditional methods for change detection that effectively assume Gaussian data distributions? To this end, we will compare ROC curves obtained from the SVM with those from chronochrome, covariance equalization, and hyperbolic anomalous change detection.

97 MATHEMATICS AND COMPUTING↗

Singular perturbation, state aggregation and nonlinear filtering

Consideration is given to a state process evolving in R(n), whose motion is that of a pure jump process in R(n) in the 0(1) time scale, upon which is superimposed a continuous motion along the orbits of a gradient-like vector field g in R(n) in the 0(1/epsilon) time scale. The infinitesimal generator of the state process is, in other words, of the form L + (1/epsilon)g. It follows from the main results presented that the projected filters converge to the finite state Wonham filter corresponding to the problem of estimating the finite state process in the presence of additive white noise.

Hijab, O.↗

Environmental Control Of A Genetic Process

E. coli bacteria altered to contain DNA sequence encoding production of hemoglobin made to produce hemoglobin at rates decreasing with increases in concentration of oxygen in culture media. Represents amplification of part of method described in "Cloned Hemoglobin Genes Enhance Growth Of Cells" (NPO-17517). Manipulation of promoter/regulator DNA sequences opens promising new subfield of recombinant-DNA technology for environmental control of expression of selected DNA sequences. New recombinant-DNA fusion gene products, expression vectors, and nucleotide-base sequences will emerge. Likely applications include such aerobic processes as manufacture of cloned proteins and synthesis of metabolites, production of chemicals by fermentation, enzymatic degradation, treatment of wastes, brewing, and variety of oxidative chemical reactions.

Khosla, Chaitan↗

Parallel accelerated vector similarity calculations for genomics applications

The surge in availability of genomic data holds promise for enabling determination of genetic causes of observed individual traits, with applications to problems such as discovery of the genetic roots of phenotypes, be they molecular phenotypes such as gene expression or metabolite concentrations, or complex phenotypes such as diseases. However, the growing sizes of these datasets and the quadratic, cubic or higher scaling characteristics of the relevant algorithms pose a serious computational challenge necessitating use of leadership scale computing. In this study we describe a new approach to performing vector similarity metrics calculations, suitable for parallel systems equipped with graphics processing units (GPUs) or Intel Xeon Phi processors. Our primary focus is the Proportional Similarity metric applied to Genome Wide Association Studies (GWAS) and Phenome Wide Association Studies (PheWAS). We describe the implementation of the algorithms on accelerated processors, methods used for eliminating redundant calculations due to symmetries, and techniques for efficient mapping of the calculations to many-node parallel systems. Finally, results are presented demonstrating high per-node performance and parallel scalability with rates of more than five quadrillion (5 × 10 15 ) elementwise comparisons achieved per second on the ORNL Titan system. In a companion paper we describe corresponding techniques applied to calculations of the Custom Correlation Coefficient for comparative genomics applications.

59 BASIC BIOLOGICAL SCIENCES↗

Search for $t$-channel scalar and vector leptoquark exchange in the high-mass dimuon and dielectron spectra in proton-proton collisions at $\sqrt{s}=13$ TeV

A search for t-channel exchange of leptoquarks (LQs) is performed in dimuon and dielectron spectra using proton-proton collision data collected at $\sqrt{s}=13$ TeV with the CMS detector at the CERN LHC. The data correspond to an integrated luminosity of 138 fb −1 . Eight scenarios are considered, in which up or down quarks couple to muons or electrons via a scalar or vector LQ exchange, for dilepton invariant masses above 500 GeV. The LQ masses are probed up to 5 TeV, beyond a regime probed by previous pair-production and single-production searches. The differential distributions of dilepton events are fit to templates that model the nonresonant LQ exchange and various standard model background processes. Limits are set on LQ-fermion coupling strengths for scalar and vector LQ masses in the 1–5 TeV range at 95% confidence level, establishing stringent limits on first- and second-generation LQs.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Study of double vector charmonium meson production at B factories within light cone formalism

In this paper the processes e{sup +}e{sup -}{yields}J/{psi}J/{psi}, J/{psi}{psi}{sup '}, {psi}{sup '}{psi}{sup '} are considered in the framework of light cone formalism. An important distinction of this approach in comparison to the approaches used in other papers is that relativistic and leading logarithmic radiative corrections to the cross section can be resummed within light cone formalism. In this paper, the effect of this resummation is studied. It is shown that this effect is important, especially for the production of higher charmonium mesons. The predicted cross sections are in agreement with the upper bounds set by the Belle Collaboration.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rapid determination of soil classes in soil profiles using vis–NIR spectroscopy and multiple objectives mixed support vector classification

Summary Visible‐near infrared (vis–NIR) spectroscopy can reveal various soil properties and facilitate soil classification. However, few studies have attempted to classify vertical soil profiles that contain several genetic horizons. Here, we propose the ‘multiple objectives mixed support vector classification’ (MOM–SVC) method to classify soil profiles. A total of 130 soil profiles were collected from genetic horizons in Zhejiang Province, China. After laboratory analysis, soil profiles were classified according to the Chinese Soil Taxonomy system. Vis–NIR spectra were recorded from each genetic horizon of each soil profile and were then pre‐processed. We performed the MOM–SVC method as follows: (i) created a support vector machine (SVM) model (one‐versus‐one approach) using spectral data from all soil horizons in calibration profiles, (ii) applied the SVM model on each horizon of the profile to be predicted, (iii) extracted ‘votes’ from each horizon and mixed (or summarized) them into the votes of each profile to be predicted and (iv) classified each profile by the majority‐voting method. We also investigated whether the additional input of auxiliary soil information (e.g. moist soil colour, soil organic matter and soil texture), which could be measured easily or be well predicted by vis–NIR spectroscopy, could improve the accuracy of soil classification when combined with it. Independent validation results showed that the MOM–SVC method performed better at the soil order level than at the suborder level. Adding auxiliary soil information to the classification model improved the overall accuracy of classification at the soil order level. The proposed MOM–SVC method provides a fast objective diagnostic of soil classes for use in soil surveys and can help to update soil databases when a more objective soil classification system is developed. Highlights The MOM–SVC method can be used to classify soil profiles objectively with a variety of soil horizons. Stratified random sampling was used to quantify prediction uncertainty in classification MOM–SVC can predict soil orders with greater accuracy than suborders. Adding auxiliary soil information into the classification model improved prediction accuracy.

Chen, S.↗