Search NASA⌕ Search

SEARCH · Search NASA

Results for “Viewpoints”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

“Tailing” Phenomenon During Polymer Propagation at The Milne Point Polymer Flood

Chemical flooding simulators traditionally assume that polymer retention follows the Langmuir isotherm, while fractional-flow calculations assume concentration-independent retention. Both models predict a delay in propagation of the polymer front (in proportion to the retention value), followed by a rapid rise in produced polymer concentration to the injected level. In contrast, laboratory retention studies for the Milne Point polymer flood (North Slope of Alaska) consistently show virtually no delay in polymer propagation, a rapid rise in produced polymer to 70-90% of the injected concentration, followed by produced concentration gradually approaching the injected value over many pore volumes. From a practical viewpoint, this behavior means that retention causes no significant delay in propagation of the polymer bank (and therefore the oil bank), but the effective viscosity and displacement efficiency are less than originally planned. This paper explores why this polymer “tailing” phenomenon occurs. During core floods, effluent was analyzed for brine-tracer concentration, viscosity, total organic carbon, and total nitrogen. The latter three items allowed three independent measures of polymer concentration and polymer retention. Experiments were performed with Milne Point core material, oil, brine, and conditions. Mechanistic experiments were also performed with packs of glass beads with controlled levels of various minerals. In Milne Point cores, the presence of the tailing phenomenon was not sensitive to flow rate, polymer concentration, core heterogeneity, or whether the core was preserved, cleaned of oil, or cleaned and resaturated with oil, or cleaned, re-saturated and aged with oil. The three independent measures of polymer concentration confirmed that the tailing phenomenon was not an artifact associated with polymer degradation or detection interferences. Tailing was also observed during mechanistic floods using glassbead packs when sufficient levels of illite or kaolinite were present. This observation was consistent with high levels of illite noted in Milne Point cores. The tailing was not noted during mechanistic floods that contained beads with montmorillonite, chlorite, calcium carbonate, dolomite, siderite, pyrite, or calcium sulfate. A model is proposed to account for the tailing phenomenon. This work suggests that mineralogy analysis (especially for illite and kaolinite) may reveal whether tailing should be accounted for during simulations of polymer propagation/retention in a given field application.

Seright, Randy↗

Development Of Thermodynamic and Kinetic Simulation Tools and Testing Procedures for Enhanced Durability of Concrete Containing Industrial By-Products

This project developed screening tools that enable evaluation of alternative cementitious binders that create concretes to significantly reduce energy and emissions while remaining cost competitive on both initial and long-term costs. The team began with the viewpoint that acceptance of new cementitious binder products has a substantially greater chance of successful implementation when capital investment is not excessive and the end product has customers that have experience and resources to use this. As such, a binder system that is based on portland cement with blended using industrial by-products (alternative cementitious materials) has the potential for dramatic and meaningful impact. The team has focused on developing implementable solutions in specifications and current practice. This however requires three main factors: 1) ability to screen byproducts and alternative materials for success, 2) ability to ‘treat’ materials chemically to enhance kinetics, and 3) ability to provide predictions of performance of both binders and concrete from first principles. The project developed/refined a state of the art and scientifically based screening test for SCM called the pozzolanic reactivity test. The team developed kinetic models to simulate these materials as well as experimental approaches to alter selected reactions. Simulation tools were developed that enable the performance of concrete to be predicted based on the chemistry and reactivity of the cement and alternative SCM. Specifically, this project: • enhanced the kinetic reactivity models for use in multi-scale computational programs that use thermodynamics to predict reaction products. 2 • developed scaling models to extend thermodynamic modeling to link these models with pore structure. This enables strength, transport property, and coupled transport prediction. • developed tools to predict performance of cementitious materials using the pozzolanic reactivity test and chemical composition. The predicted properties are consistent with AASHTO R101 and the CEB-FIP model code and can be measured using associated test procedures. • demonstrated mechanical and fracture based modeling tools that thermodynamic predictions and inputs to predict concrete service life. These results have been used to demonstrate the value of enabling specifications to include ASTM C 595 cement as well ASTM C150 cement. In addition, these products are being used to expedite the evaluation of alternative SCM to aide in determining which materials have potential value and what ‘compositions’ of blended cements merit further investment.

42 ENGINEERING↗

Seeding picoscale solutions for social macro goals: complex thinking in projects for vulnerable communities

This chapter presents lessons learned from two experiences of implementing sociopoliticalsustainability strategies to achieve environmental and economic sustainability.The projects were carried out in rural communities in Guinea-Bissau andJamaica, which are both vulnerable to climate change. Each experience, developedfrom a systemic perspective and under two frameworks (the water–food–energynexus and ‘Appropriate Technology’), is described in four phases (problemcharacterization, solution design, solution pre-evaluation, and implementation),with the significant findings made by the team in terms of challenges, rewards, andessential conditions for development. Both deal with environment-friendly solutionsthat solve the problems of water and energy provision. Based on complex thinking,the experiences are analyzed from the social inclusion, participation, empowerment,and learning theory viewpoints. Finally, the insights gained by the team arehighlighted: communication requirements, the level of dependency of industrializedsolutions, budget constraints, training, testing, and planning recommendations, thediversity of interaction with the communities, and partners’ skills. As a result, futureactions can exploit these experiences and contribute to the success of subsequentprojects.

Pereira Pinto, Joao↗

Expanding Accurate Person Recognition to New Altitudes and Ranges: The BRIAR Dataset

Face recognition technology has advanced significantly in recent years due largely to the availability of large and increasingly complex training datasets for use in deep learning models. These datasets, however, typically comprise images scraped from news sites or social media plat-forms and, therefore, have limited utility in more advanced security, forensics, and military applications. These applications require lower resolution, longer ranges, and ele-vated viewpoints. To meet these critical needs, we collected and curated the first and second subsets of a large multi-modal biometric dataset designed for use in the research and development (R&D) of biometric recognition technolo-gies under extremely challenging conditions. Thus far, the dataset includes more than 350,000 still images and over 1,300 hours of video footage of approximately 1,000 sub-jects. To collect this data, we used Nikon DSLR cameras, a variety of commercial surveillance cameras, specialized long-rage R&D cameras, and Group 1 and Group 2 UAV platforms. The goal is to support the development of algorithms capable of accurately recognizing people at ranges up to 1,000 m and from high angles of elevation. These ad-vances will include improvements to the state of the art in face recognition and will support new research in the area of whole-body recognition using methods based on gait and anthropometry. This paper describes methods used to col-lect and curate the dataset, and the dataset's characteristics at the current stage.

Brogan, Joel↗

EIC: The View from Jefferson Lab

The prospect of an EIC for advancing our knowledge of QCD, nucleon structure, and nuclear physics has been of increasing interest around the world during the last few years. The perspective for realization of an EIC in the US will be examined from the viewpoint of Jefferson Lab, its user community, and the US nuclear physics community.

McKeown, Robert↗

Uraniferous Phosphates: Resource, Security Risk, or Contaminant

The escalation of the price of uranium (U) yellow cake (summer high = $130/0.454 kg (lb) has called into question the continuing availability of sufficient stockpiles and ores to process. As was developed during the years following World War II, the establishment and maintenance of a strategic inventory is a reasonable consideration for today. Therefore, it becomes critical to look at potential secondary resources beyond the classical ore suites now being utilized. The most economically viable future secondary source seems to be the byproducts of the beneficiation of phosphoric acids derived from phosphate ores. Phosphorous (P) is an essential nutrient for plants; its deficiency can result in highly restrictive limitations in crop productivity. Acidic soils in tropical and subtropical regions of the world are often P deficient with high P-sorption (fixation) capacities. To correct this deficiency, efficient water-soluble P fertilizers are required. The use of raw phosphate rocks not only adds phosphate but also its contained contaminants, including uranium to the treated land. Another immediate difficulty is phosphogypsum, the standard byproduct of simple extraction. It, for practical purposes, has been selectively classified as TENORM by regulators. The imposition of these standards presents major current and future disposal and re-utilization problems. Therefore, establishing an economically viable system that allows for uranium byproduct extraction from phosphoric acids is desirable. Such a system would be dependent on yellow cake base price stability, reserve estimates, political conditions, nation-state commitment, and dependence on nuclear energy. The accumulation of yellow cake from the additional extraction process provides a valuable commodity and allows the end acid to be a more environmentally acceptable product. The phosphogypsum already accumulated, as well as that which is in process, will not make a viable component for a radiation disposal devise (RDD). Concern for weapon proliferation by rogue nation states from the byproduct production of yellowcake is an unlikely scenario. To extract the fissile U-235 (0.07%) isotope from the yellowcake (99.3%) requires the erection of a costly major gaseous diffusion or a cascading centrifuge facility. Such a facility would be extremely difficult to mask. Therefore, from a diminished security risk and positive economic and environmental viewpoints, the utilization of a phosphoric acid beneficiation process extracting uranium is desirable. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Quality-of-Life-Adjusted Survival Analysis of Concurrent Chemo Radiotherapy for Locally Advanced (Nonmetastatic) Nasopharyngeal Cancer

Purpose: To assess whether the benefits of adding cisplatin (CDDP) concurrent with radiotherapy, followed by adjuvant CDDP and fluorouracil, justifies the toxicity cost for nasopharyngeal cancer (NPC) using the quality-adjusted time without symptoms or toxicity (Q-TWiST) approach. Methods and Materials: One hundred seven patients treated with radiotherapy (RT) and 111 with concurrent chemotherapy and radiotherapy (CRT) were analyzed. The overall survival was divided into three health states: time on active treatment only, during which any subjective nonhematologic toxic event of grade > = 3 was reported; time without symptoms of disease relapse; or treatment and time following first disease RELapse. The relative advantage of CRT and RT was examined by conducting the analysis cumulatively at restriction times 3, 6, 24, 36, 48 months. Results: At 48 months, the improvement in disease-free survival was 14.4% for CRT, whereas that for overall survival was 18.9%. The differences in Q-TWiST were -0.4, -0.7, 0.1, 1.6, and 3.6 months at 3, 6, 24, 36, and 48 months, respectively, with positive differences favoring CRT. At 24 months, the difference in Q-TWiST began to favor CRT. At 36 months, CRT may be the preferred option from the patient's viewpoint if the time spent in the REL state is valued to be <0.83, with the value of perfect health being 1. Finally, Q-TWiST accumulated within 48 months indicated a significant advantage in quality-adjusted survival time for CRT (p = 0.020). Conclusion: Irrespective of how patients valued periods of toxicity and delayed disease progression, concurrent chemotherapy and radiotherapy offered NPC patients significantly more quality-adjusted survival than radiotherapy alone in the long term.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Statistical method for resolving the photon-photoelectron-counting inversion problem

A statistical inversion method is proposed for the photon-photoelectron-counting statistics in quantum key distribution experiment. With the statistical viewpoint, this problem is equivalent to the parameter estimation for an infinite binomial mixture model. The coarse-graining idea and Bayesian methods are applied to deal with this ill-posed problem, which is a good simple example to show the successful application of the statistical methods to the inverse problem. Numerical results show the applicability of the proposed strategy. The coarse-graining idea for the infinite mixture models should be general to be used in the future.

97 MATHEMATICS AND COMPUTING↗

Alteration of municipal solid waste incineration bottom ash focusing on the evolution of iron-rich constituents

Municipal solid waste incineration (MSWI) bottom ash contains a considerable amount of Fe-rich constituents. The behaviors of these constituents, such as dissolution and precipitation, are quite important as they regulate the distribution of a series of ions between the liquid (percolated fluid) and solid (ash deposit) phases. This paper studied both fresh and weathered MSWI bottom ash from the mineralogical and geochemical viewpoint by utilizing optical microscopy, scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX), and powder X-ray diffraction. The analysis results revealed that for the fresh bottom ash, iron preferentially existed in the chemical forms of spinel group (mainly Fe{sub 3}O{sub 4}, and a series of Al- or Ti- substituted varieties), metallic inclusions (including Fe-P, Fe-S, Fe-Cu-Pb), hematite (Fe{sub 2}O{sub 3}) and unburned iron pieces. In the 1-20 years weathered bottom ash collected from a landfill site, interconversions among these Fe-rich constituents were identified. Consequently, numerous secondary products were developed, including goethite ({alpha}-FeOOH), lepidocrocite ({gamma}-FeOOH), hematite, magnetite, wustite (FeO), Fe-Si-rich gel phase. Of all these transformation products, hydrous iron oxides were the most common secondary minerals. Quantitative chemical analysis of these secondary products by SEM/EDX disclosed a strong association between the newly formed hydrous iron oxides and heavy metals (e.g. Pb, Zn, Ni, and Cu). The results of this study suggest that the processes of natural weathering and secondary mineralization contribute to reduction of the potential risks of heavy metals to the surrounding environments.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Trade-off study on the power capacity of a prototype SFR in Korea

The major roles of a prototype SFR are to provide irradiation test capability for the fuel and structure materials, and to obtain operational experiences of systems. Due to a compromise between the irradiation capability and construction costs, the power level should be properly determined. In this paper, a trade-off study on the power level of the prototype SFR was performed from a neutronics viewpoint. To select candidate cores, the parametric study of pin diameters was estimated using 20 wt.% uranium fuel. The candidate cores of different power levels, 125 MWt, 250 MWt, 400 MWt, and 500 MWt, were compared with the 1500 MWt reference core. The resulting core performance and economic efficiency indices became insensitive to the power at about 400-500 MWt and sharply deteriorated at about 125-250 MWt with decreasing core sizes. Fuel management scheme, TRU core performance comparing with uranium core, and sodium void reactivity were also evaluated with increasing power levels. It is found that increasing the number of batches showed higher burnup performance and economic efficiency. However, increasing the cycle length showed the trends in lower economic efficiency. Irradiation performance of TRU and enriched TRU cores was improved about 20 % and 50 %, respectively. The maximum sodium void reactivity of 5.2$ was confirmed less than the design limit of 7.5$. As a result, the power capacity of the prototype SFR should not be less than 250 MWt and would be appropriate at {approx} 500 MWt considering the performance and economic efficiency. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Use of simplified PSA studies in support of the ASTRID design process

In the framework of the French Act of 28 June 2006 about nuclear materials and waste management, a GEN IV and actinides incineration demonstration prototype is to be commissioned in the 2020 decade. In this objective a prototype called ASTRID (Advanced Sodium Technological Reactor for Industrial Demonstration) is proposed to demonstrate the progress made in SFR technology at an industrial scale by qualifying innovative options, some of which still remain open in the areas requiring improvements, especially safety and operability. More specifically, we aim for a level of safety that is at least equivalent to that of the EPR (third generation), with improvements made in SFR-specific fields. The integration of safety issues in the early phase of the design of ASTRID is necessarily expected. For this purpose, CEA and its partners AREVA and EDF have planned to perform a level-1 PSA to support and orientate the preliminary design of ASTRID reactor. This paper presents the PSA approach and current studies for the assessment of safety systems and the future work to be done for the 2012-2014 period. The preliminary preparation of PSA studies is presented: objectives and scope of the early design phase PSA, definition of core damage states, selection and grouping of initiating events, assessment of safety functions and related systems. Work under progress is also presented: modelling of event trees, construction of fault trees of safety systems, transient calculations of accident sequences with the CATHARE2 code and reliability data assessment. Main objectives of a level-1 PSA performed at conceptual design stage are an early assessment of the safety architecture of the reactor and findings about the most effective areas for improvement, but also the identification of dominant accident sequences and comparison with alternative designs. After the elaboration of a simplified level-1 PSA model for nominal state and main internal initiators, various design alternatives will be evaluated from the viewpoint of PSA in order to support the design choices of the ASTRID reactor. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Development of integrated core disruptive accident analysis code for FBR - ASTERIA-FBR

The evaluation of consequence at the severe accident is the most important as a safety licensing issue for the reactor core of liquid metal cooled fast breeder reactor (LMFBR), since the LMFBR core is not in an optimum condition from the viewpoint of reactivity. This characteristics might induce a super-prompt criticality due to the core geometry change during the core disruptive accident (CDA). The previous CDA analysis codes have been modeled in plural phases dependent on the mechanism driving a super-prompt criticality. Then, the following event is calculated by connecting different codes. This scheme, however, should introduce uncertainty and/or arbitrary to calculation results. To resolve the issues and obtain the consistent calculation results without arbitrary, JNES is developing the ASTERIA-FBR code for the purpose of providing the cross-check analysis code, which is another required scheme to confirm the validity of the evaluation results prepared by applicants, in the safety licensing procedure of the planned high performance core of Monju. ASTERIA-FBR consists of the three major calculation modules, CONCORD, dynamic-GMVP, and FEMAXI-FBR. CONCORD is a three-dimensional thermal-hydraulics calculation module with multi-phase, multi-component, and multi-velocity field model. Dynamic-GMVP is a space-time neutronics calculation module. FEMAXI-FBR calculates the fuel pellet deformation behavior and fuel pin failure behavior. This paper describes the needs of ASTERIA-FBR development, major module outlines, and the model validation status. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Carbon pricing, nuclear power and electricity markets

In 2010, the NEA in conjunction with the International Energy Agency produced an analysis of the Projected Costs of Electricity for almost 200 power plants, covering nuclear, fossil fuel and renewable electricity generation. That analysis used lifetime costs to consider the merits of each technology. However, the lifetime cost analysis is less applicable in liberalised markets and does not look specifically at the viewpoint of the private investor. A follow-up NEA assessment of the competitiveness of nuclear energy against coal- and gas-fired generation under carbon pricing has considered just this question. The economic competition in electricity markets is today between nuclear energy and gas-fired power generation, with coal-fired power generation not being competitive as soon as even modest carbon pricing is introduced. Whether nuclear energy or natural gas comes out ahead in their competition depends on a number of assumptions, which, while all entirely reasonable, yield very different outcomes. The analysis in this study has been developed on the basis of daily data from European power markets over the last five-year period. Three different methodologies, a Profit Analysis looking at historic returns over the past five years, an Investment Analysis projecting the conditions of the past five years over the lifetime of plants and a Carbon Tax Analysis (differentiating the Investment Analysis for different carbon prices) look at the issue of competitiveness from different angles. They show that the competitiveness of nuclear energy depends on a number of variables which in different configurations determine whether electricity produced from nuclear power or from CCGTs generates higher profits for its investors. These are overnight costs, financing costs, gas prices, carbon prices, profit margins (or mark-ups), the amount of coal with carbon capture and electricity prices. This paper will present the outcomes of the analysis in the context of a liberalised electricity market, looking at the impact of the seven key variables and provide conclusions on the portfolio that a utility would be advised to maintain, given the need to limit risks but also to move to low carbon power generation. Such portfolio diversification would not only limit financial investor risk, but also a number of non-financial risks (climate change, security of supply, accidents). (authors)

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Tritium research activities under the broader approach program in JAEA

The R and D for tritium technologies to a demonstration reactor (DEMO) plant are carried out in the Broader Approach (BA) program in Japan: 1) tritium accountancy technology; 2) basic tritium safety research; and 3) tritium durability test. A multi-purpose facility will be constructed at Rokkasho in Japan to carry out the above R and D. Beta and gamma radioisotopes as well as tritium (370 TBq/year) can be handled in the facility. At TPL (Tritium Process Laboratory) of JAEA, a series of R and D programs for tritium technologies have been carried out. The main R and D activities in this field are: tritium behavior in a confinement; monitoring; detritiation; and decontamination. In this paper, the results of recent activities at TPL of JAEA are also summarized from the viewpoint of the related R and D subjects under the BA program. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Influence of oxygen on permeation of hydrogen isotopes through group 5 metals

Group 5 metals (V, Nb and Ta) are potential candidates of tube material in vacuum permeator for tritium recovery from Pb-17Li liquid blanket system. From this viewpoint, the influence of oxygen on the surface reaction rates of hydrogen on V and Ta were examined in an ultra-high vacuum apparatuses at elevated temperatures, and the results were compared with the data on Nb acquired in a previous study. The surface reaction rates of hydrogen on V and Ta, and consequently permeation rates, decreased with increasing oxygen concentration in the bulk as previously observed for Nb. These observations were ascribed to the increase in surface oxygen coverage with increasing bulk oxygen concentration. The weakest influence of oxygen on hydrogen permeation rate was observed for V. The expected permeation rate through V under typical blanket conditions, however, was not necessarily high due to high oxygen solubility in V. The evaluation indicated that the highest permeation rate should be obtained with Nb under typical blanket conditions. (authors)

36 MATERIALS SCIENCE↗

Hydrogen retention in deposition layers formed from type 316 stainless steel

From the viewpoints of plasma control and radiation safety, tritium retention in deposition layers is an important problem. In this study, deposition layers from type 316 stainless steel were formed by a sputtering method using hydrogen RF plasma at three different temperatures. The behavior of hydrogen release from the deposition layers was observed by a thermal desorption method at argon atmosphere. It was found that hydrogen retention and release behavior greatly change depending on the temperature of a substrate where the layer is formed. The surface structure of the layer also changed depending on the temperature. However, the ratios of metallic atoms such as Fe, Cr and Ni in deposition layers were almost the same as that in type 316 stainless steel. (authors)

36 MATERIALS SCIENCE↗

Solid-polymer-electrolyte tritiated water electrolyzer for Water Detritiation System

A solid-polymer-electrolyte (SPE) water electrolyzer for high-level tritiated water was designed for the Water Detritiation System (WDS). Polymeric materials were selected from a main viewpoint of radiation durability to keep their functions beyond ITER-WDS requirement (530 kGy). Our selection was Pt + Ir applied Nafion{sup R} N117 ion exchange membrane, VITON{sup R} O-ring seal and polyimide insulator. A {gamma}-ray irradiation test of the SPE cell demonstrated the durability of the cell against 530 kGy. The electrolyzer is designed to handle around 9 TBq/kg of high-level tritiated water. The detritiation of the polymeric materials is thus a critical problem for the maintenance or for the disposal of the electrolyzer. As for the Nafion membrane, most of tritiated water in the membrane was rapidly removed by such as vacuum dehydration. It was difficult, by contrast, to remove bound tritiated water in the membrane. An effective method to remove tritiated water in the bound water is to promote an isotope exchange. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Reduction of discretization error for ray tracing of MOC through a correction on collision probabilities

A new correction model for ray tracing of the method of characteristics is proposed in order to reduce discretization error. As the ray tracing parameters such as azimuthal angle division, polar angle division and ray separation are considered in this study. In the method of characteristics, region average scalar fluxes can be implicitly expressed by collision probabilities, although these collision probabilities are not directly treated in the ordinary calculation scheme. From this viewpoint, difference between a coarse ray tracing condition and a detailed one can be interpreted as the difference in the estimation of collision probabilities. In other words, the discretization error for ray tracing can be recognized as a consequence of inaccurate collision probabilities caused by coarse ray tracing. This discussion suggests that accurate region average scalar flux can be obtained through an appropriate correction on collision probabilities. In this paper, a correction model on collision probabilities is theoretically derived based on the neutron balance equation, and its validity is confirmed through typical single assembly calculations. The effectiveness of the present correction method is also discussed in this paper. It is confirmed that discretization error for ray tracing can be significantly reduced by the present correction method in a multi-assembly calculation, though the correction factor is estimated in single assembly geometry. (authors)

97 MATHEMATICS AND COMPUTING↗