Search NASA⌕ Search

SEARCH · Search NASA

Results for “Volume of fluid method”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Shear thinning rheology in a concentrated suspension of fibers: the role of attractive interactions

Fiber-reinforced composites are ubiquitously encountered in the engineering, automobile, and aerospace industries. Fabrication of these composites requires the mixing of fibers dispersed in a liquid, and the final structure is affected by fiber properties, interactions, and flow fields. A good understanding of the rheology of fiber suspensions can aid in the design and optimization of the fabrication processes. To this end, we simulate the simple shear flow of fiber suspensions by accounting for short range lubrication, van der Waals attractive, electrostatic repulsion interactions, as well as friction between fibers. Direct numerical simulations are performed using the Immersed Boundary Method where the fibers are modeled as flexible slender bodies governed by the Euler-Bernoulli beam theory and the fluid flow is resolved using the Navier-Stokes equations. The simulation results for the suspension viscosity and yield stress are consistent with the experimental data from the literature for polyamide fiber suspensions. The shear-thinning behavior becomes stronger as we increase the magnitude of attractive interactions. Furthermore, we perform a parametric study varying fiber flexibility, volume fraction, aspect ratio, inertia and examine suspension viscosity and yield stress.

Khan, Monsurul↗

Fluid flow in a jet and the Ca XIX line profiles observed during solar flares

The present study considers two types of fluid models as methods for reproducing the blueshifts and line broadening observed in soft X-ray lines during the rise of solar flares. The fluid models representing the laminar flow of material in a jet and through a pipe were used to derive the velocity at each location in the flow. The optimal values for the free parameters in the jet model were within the ranges expected for solar flare conditions. The jet was much smaller than typical flare volumes estimated from spatial images, but the resulting densities were consistent with the upper limit of densities derived using density-sensitive line ratios. This supports previous reports of small filling factors and is interpreted as evidence for a chromospheric origin for the flow. Stability analysis indicates that, although the laminar jet can reproduce the observations, instabilities may cause the flow to become turbulent, and that this laminar treatment is not strictly valid.

Bornmann, P. L.↗

Dynamical Modeling of Surface Tension

In a recent review it is said that free-surface flows 'represent some of the difficult remaining challenges in computational fluid dynamics'. There has been progress with the development of new approaches to treating interfaces, such as the level-set method and the improvement of older methods such as the VOF method. A common theme of many of the new developments has been the regularization of discontinuities at the interface. One example of this approach is the continuum surface force (CSF) formulation for surface tension, which replaces the surface stress given by Laplace's equation by an equivalent volume force. Here, we describe how CSF formulation might be made more useful. Specifically, we consider a derivation of the CSF equations from a minimization of surface energy as outlined by Jacqmin (1996). This reformulation suggests that if one eliminates the computation of curvature in terms of a unit normal vector, parasitic currents may be eliminated. For this reformulation to work, it is necessary that transition region thickness be controlled. Various means for this, in addition to the one discussed by Jacqmin (1996), are discussed.

Brackbill, Jeremiah U.↗

Co-Processing Fast Pyrolysis Bio-Oils and Hydrothermal Liquefaction Biocrudes in Fluid Catalytic Cracking and Hydroprocessing in Refineries

Co-processing of biogenic feedstocks within the existing petroleum infrastructure represents an opportunity to incorporate large volumes of bio-carbon into transportation fuels. However, upgrading intermediate liquids from biomass and waste to final products efficiently and economically, while minimizing impacts to existing refinery infrastructure, remains a notable barrier to commercialization. The co-processing project, Bio-oil Co-processing with Refinery Streams, aimed to generate foundational knowledge for processing renewable intermediates in petroleum refineries and offer co-processing strategies, as well as develop new methods for biogenic carbon tracking and measurement.

bio-oil↗

Computational study on the impact of gasoline-ethanol blending on autoignition and soot/NO x emissions under low-load gasoline compression ignition conditions

Here, in the present work, computational fluid dynamics (CFD) simulations of a single-cylinder gasoline compression ignition (GCI) engine are performed to investigate the impact of gasoline-ethanol blending on autoignition, nitrogen oxide (NO x ), and soot emissions under low-load conditions. In order to represent the test gasoline (RD5-87), a four-component toluene primary reference fuel (TPRF)+ethanol (ETPRF) surrogate (with 10% ethanol by volume; E10) is employed. A three-dimensional (3D) engine CFD model employing finite-rate chemistry with a skeletal kinetic mechanism (including NO x sub-mechanism), adaptive mesh refinement (AMR), and hybrid method of moments (HMOM) is adopted to capture the in-cylinder combustion phenomena and soot/NO x emissions. The engine CFD model is validated against experimental data for three gasoline-ethanol blends: E10, E30 and E100, with varying ethanol content by volume. Model validation is carried out for a broad range of start-of-injection (SOI) timings (−21, −27, −36, and −45 crank angle degrees (°CA) after top-dead-center (aTDC)) with respect to in-cylinder pressure, heat release rate, combustion phasing, NO x and soot emissions. For relatively later injection timings (−21 and −27 °CA aTDC), E30 yields higher amount of soot than E10; while the trend reverses for early injection cases (−36 and −45 °CA aTDC ). On the other hand, E100 yields the lowest amount of soot among all fuels irrespective of SOI timing. Further, E10 shows a non-monotonic trend in soot emissions with SOI timing: SOI-36>SOI-45>SOI-21>SOI-27, while soot emissions from E30 exhibit monotonic decrease with advancing SOI timing. NO x emissions from various fuels follow a trend of E10>E30>E100. On the other hand, NO x emissions increase as SOI timing is advanced for all fuels, with an anomaly for E10 and E100 where NO x decreases when SOI is advanced beyond −36 °CA aTDC. Detailed analysis of the numerical results is performed to investigate the soot/NO x emission trends and elucidate the impact of chemical composition and physical properties on autoignition and emissions characteristics.

Computational fluid dynamics↗

Finite Element Modeling of Diffusion in Fractured Porous Media by Using Hierarchical Material Properties

Abstract Fractured porous media challenge modeling approaches due to high computational costs and excessive mesh refinement imposed by the extreme scale variability of fractures and the heterogeneity of the surrounding porous rock. To overcome such difficulties, we utilize the hierarchical finite element method ( Hi ‐FEM) that has been developed previously to simulate the electrical potential distribution in complex geologic environments. The method employs the hierarchical basis functions in classical finite element analysis to enable representation of material properties on each dimensional component of a given 3D unstructured finite element, thereby inherently allowing for interactions at the boundary between fracture and a host rock. In this study, we extend its application to transient fluid flow and heat conduction in the Laplace domain. Time‐domain flow solutions are obtained by numerical inverse Laplace transform. We evaluate the accuracy of the method using different flow models and demonstrate its robustness for large‐scale, rock mass models featuring complex fracture networks. Moreover, for the computation of nodal Darcian velocity fields in fractured porous media where the fractures are represented as 2D features, a new approach that employs the Yeh's Galerkin model for both volume and facet elements is proposed. Results show that Hi ‐FEM can produce accurate flow solutions for fractured porous media without any need of coupling or transfer mechanism while still being computationally economical and numerically robust, even for large‐scale simulations.

Beskardes, G. D.↗

Digitally manufactured air plasma-on-water reactor for nitrate production

The sustainable production of food to support the increasing world population is one of humanity’s most pressing challenges. Plasma activated water, produced using renewable energy, can help fulfill plants’ needs in sustainable agriculture approaches. The design, implementation, and characterization of a digitally manufactured air plasma-on-water reactor (POWR) for the synthesis of nitrate as green nitrogen fertilizer is presented. The interaction of air plasma-generated reactive oxygen and nitrogen species with water produces nitrate (NO 3 - ) and related species, which are the main nitrogen-containing nutrients for plants. The mild conditions of the operation of the POWR opens the possibility to use plastics, particularly through digital manufacturing strategies such as 3D-printing, for its fabrication. A pin-to-plate reactor configuration powered by high-voltage alternating power is chosen due to its simplicity and efficacy. A computational thermal-fluid model is used to evaluate the design and attain expected operational characteristics. The experimental characterization of the POWR encompassed design and operation parameters, namely electrode-water spacing, air flow rate, and voltage level. A machine learning approach is implemented to extract and quantify characteristic features of the plasma–water interaction, such plasma volume and plasma–water interface area. Experimental results revealed that the nitrate production rate varies linearly with dimensionless plasma volume. The design, fabrication, and characterization methods presented can be adapted to other POWRs and help enable on-demand nitrogen fertilizer production at low environmental and economic cost.

Physics↗

TH-AB-209-09: Quantitative Imaging of Electrical Conductivity by VHF-Induced Thermoacoustics

Purpose: To demonstrate that very high frequency (VHF) induced thermoacoustics has the potential to provide quantitative images of electrical conductivity in Siemens/meter, much as shear wave elastography provides tissue stiffness in kPa. Quantitatively imaging a large organ requires exciting thermoacoustic pulses throughout the volume and broadband detection of those pulses because tomographic image reconstruction preserves frequency content. Applying the half-wavelength limit to a 200-micron inclusion inside a 7.5 cm diameter organ requires measurement sensitivity to frequencies ranging from 4 MHz down to 10 kHz, respectively. VHF irradiation provides superior depth penetration over near infrared used in photoacoustics. Additionally, VHF signal production is proportional to electrical conductivity, and prostate cancer is known to suppress electrical conductivity of prostatic fluid. Methods: A dual-transducer system utilizing a P4-1 array connected to a Verasonics V1 system augmented by a lower frequency focused single element transducer was developed. Simultaneous acquisition of VHF-induced thermoacoustic pulses by both transducers enabled comparison of transducer performance. Data from the clinical array generated a stack of 96-images with separation of 0.3 mm, whereas the single element transducer imaged only in a single plane. In-plane resolution and quantitative accuracy were measured at isocenter. Results: The array provided volumetric imaging capability with superior resolution whereas the single element transducer provided superior quantitative accuracy. Combining axial images from both transducers preserved resolution of the P4-1 array and improved image contrast. Neither transducer was sensitive to frequencies below 50 kHz, resulting in a DC offset and low-frequency shading over fields of view exceeding 15 mm. Fresh human prostates were imaged ex vivo and volumetric reconstructions reveal structures rarely seen in diagnostic images. Conclusion: Quantitative whole-organ thermoacoustic tomography will be feasible by sparsely interspersing transducer elements sensitive to the low end of the ultrasonic range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Mapping unstructured grid computations to massively parallel computers

Investigated here is this mapping problem: assign the tasks of a parallel program to the processors of a parallel computer such that the execution time is minimized. First, a taxonomy of objective functions and heuristics used to solve the mapping problem is presented. Next, we develop a highly parallel heuristic mapping algorithm, called Cyclic Pairwise Exchange (CPE), and discuss its place in the taxonomy. CPE uses local pairwise exchanges of processor assignments to iteratively improve an initial mapping. A variety of initial mapping schemes are tested and recursive spectral bipartitioning (RSB) followed by CPE is shown to result in the best mappings. For the test cases studied here, problems arising in computational fluid dynamics and structural mechanics on unstructured triangular and tetrahedral meshes, RSB and CPE outperform methods based on simulated annealing. Much less time is required to do the mapping and the results obtained are better. Compared with random and naive mappings, RSB and CPE reduce the communication time two fold for the test problems used. Finally, we use CPE in two applications on a CM-2. The first application is a data parallel mesh-vertex upwind finite volume scheme for solving the Euler equations on 2-D triangular unstructured meshes. CPE is used to map grid points to processors. The performance of this code is compared with a similar code on a Cray-YMP and an Intel iPSC/860. The second application is parallel sparse matrix-vector multiplication used in the iterative solution of large sparse linear systems of equations. We map rows of the matrix to processors and use an inner-product based matrix-vector multiplication. We demonstrate that this method is an order of magnitude faster than methods based on scan operations for our test cases.

Hammond, Steven Warren↗

Three Dimensional Flow and Pressure Patterns in a Single Pocket of a Hydrostatic Journal Bearing

The flow in a hydrostatic pocket is described by a mathematical model that uses the three dimensional Navier-Stokes equations written in terms of the primary variables, u, v, w, and p. Using a conservative formulation, a finite volume multi-block method is applied through a collocated, body fitted grid. The flow is simulated in a shallow pocket with a depth/length ratio of 0.02. The flow structures obtained and described by the authors in their previous two dimensional models are made visible in their three dimensional aspect for the Couette flow. It has been found that the flow regimes formed central and secondary vortical cells with three dimensional corkscrew-like structures that lead the fluid on an outward bound path in the axial direction of the pocket. The position of the central vortical cell center is at the exit region of the capillary restrictor feedline. It has also been determined that a fluid turn around zone occupies all the upstream space between the floor of the pocket and the runner, thus preventing any flow exit through the upstream port. The corresponding pressure distribution under the shaft presented as well. It was clearly established that for the Couette dominated case the pressure varies significantly in the pocket in the circumferential direction, while its variation is less pronounced axially.

Braun, M. Jack↗

Monte Carlo/CFD Coupling for Accurate Modeling of the Delayed Neutron Precursors and Compressibility Effects in Molten Salt Reactors

Multiphysics reactor analysis has become one of the leading activities of most nuclear engineering research groups. Coupled neutronics and thermal/hydraulics (T/H) simulations have traditionally been performed by adopting deterministic transport tools and reactor system T/H codes. The main reason for avoiding higher fidelity numerical methods like continuous-energy Monte Carlo analysis has been the high computational cost of coupled, full-scale simulations. Nowadays, high fidelity multiphysics simulations represent a hot research topic, with several applications involving advanced nuclear systems. Liquid fuel Molten Salt Reactors (MSRs) feature peculiar physical phenomena that are not present in solid fuel reactors. Some of these phenomena are not correctly resolved by legacy reactor physics tools, and require specific treatments. This work focuses in particular on the analysis of the effect of the delayed neutron precursors drift and the impact of liquid fluid thermal expansion and compressibility in postulated criticality excursion transients in fast-spectrum MSRs. A new modeling tool based on a Monte Carlo approach for neutronics (Serpent code) coupled to a Computational Fluid Dynamic (CFD) analysis (OpenFOAM) was developed to obtain accurate modeling and simulation of these phenomena. The development of the Serpent Monte Carlo code [1] at VTT in the past few years has made this code particularly attractive for performing multiphysics studies. The availability of a flexible multiphysics interface, on-the-fly Doppler broadening and density-based collision rejection, and Delta-tracking, proved of paramount importance for the computationally efficient performance of coupled Monte Carlo/CFD calculations [2]. OpenFOAM is a C++ multiphysics toolkit featured by automatic matrix construction and solution capabilities for scalar and vector partial differential equations (PDEs), adopting several possible differencing and interpolation schemes, based on the Finite-Volume method. The ease of implementing the constitutive equations of different physical phenomena makes OpenFOAM particularly suitable for the modeling of complex coupled phenomena. In the past, several research activities proposed the adoption of both Serpent and OpenFOAM for the modeling and simulation of MSRs and the associated fuel cycles. In this work, these tools have been internally coupled for the steady-state and transient analysis of fast-spectrum systems, accounting for the effect of delayed neutron precursors transport and the salt thermal expansion and compressibility.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A New Method for Evaluating the Carbon Isotope Characteristics of Carbonate Formed Under Cryogenic Conditions Analogous to Mars

The two upcoming robotic missions to Mars, Phoenix and MSL, will both have the capability of measuring the carbon isotopic composition of CO2 in the martian atmosphere, as well as possible CO2 trapped in carbonate minerals in the Martian soil. Results from orbital and landed missions now clearly indicate that no large scale deposits of carbonate materials exist at the surface. However, some results from orbital remote sensing have been interpreted to indicate that carbonate minerals are present as fine particles interspersed at low concentrations (approx. 2%) in the martian dust. One likely mechanism for the production of these carbonates is during the freezing of transient water near the surface. Large deposits of near surface ice and photographic evidence for flowing water on the surface suggest that transient melting and refreezing of H2O is an active process on Mars. Any exposure of these fluids to the CO2 rich atmosphere should al-low the production of HCO3- solutions. Carbonates are likely precipitates from these solutions during freezing as extensive CO2 degassing, driven by the fluid s decreasing volume, drives CO2 out. This rapid CO2 degassing increases the pH of the solution and drives carbonate precipitation. It has been shown in previous studies that this rapid CO2 degassing also results in a kinetic isotopic fractionation where the CO2 gas has a much lighter isotopic composition causing a large isotope enrichment of C-13 in the precipitated carbonate. This kinetic isotope enrichment may be very common in the current martian environment, and may be a very important factor in understanding the very high deltaC-13 values of carbonates found in the martian meteorites. However, while previous studies have succeeded in generally quantifying the magnitude of this effect, detailed studies of the consistency of this effect, and the freezing rates needed to produce it are needed to understand any carbon isotope analyses from carbonate minerals in the martian soil or dust. This study demonstrates an innovative new method for measuring the isotopic composition of gas evolved from the freezing of carbonate solutions in real time, which allows for a much clearer view of the chemical processes involved. This method now sets the stage for detailed analysis of the chemical and isotopic mechanisms that produce cryogenic carbonates.

Niles, P. B.↗

Quantification of the Crack Evolution Process by Extracting Relevant Signal Components from Wave Propagation and Diffusive Transport Front Measurements

Wave propagation and diffusive transport phenomena in a geological rock sample undergoing crack evolution process are expected to interact with the mechanical discontinuities in the medium. The measurements of the signals associated with these phenomena can be used to assess and monitor the crack-driven micromechanical alterations in the rock. Different wave/diffusion phenomena, such as sonic propagation, pressure diffusion, and acoustic emission (AE), are sensitive to different elements of the mechanical discontinuities generated during the evolution of the crack clusters from initiation to coalescence. Sonic propagation, AE, and pressure diffusion monitoring have the potential to map the crack evolution because the transmitter-receiver arrays can be designed, arranged and tuned to (1) achieve maximum recovery of the scattered waveforms and travel times, (2) capture the later arrivals and multiple reflections, and (3) illuminate large rock volume. However, the structural/topological complexities of the mechanical discontinuities, complex distribution of the stress fields, complex mechanical alterations in media, and fluid redistribution in the crack system pose serious challenges for the detection and modeling of the crack evolution process (from here on, we will use the term ‘crack evolution process’ to mean that the crack evolution occurred under shallow crustal conditions). For purposes of accurately accounting such complexities and heterogeneities in the absence of reliable physical laws, simulation methods, and signal processing techniques, my early-career research proposal will develop and apply novel data-driven machine learning methods to: (1) extract signal components relevant to the various phases of crack evolution and (2) generate a 2D visual map of the crack evolution process.

58 GEOSCIENCES↗

Application of optical methods to the study of jet noise and turbulence

Optical methods are generally applied in fluid mechanics for either visualization or measurement. The use of a laser anemometer to study flow velocity in a jet and its relaton to the sound radiated is described. The same acoustic emission phenomenon is also measued by combining the signals from four Schlieren systems with that from an interferometer. The use of an optical Fourier transformation approach with real time analysis to determine the spatio-temporal structure of a field of mass volume such as a waveguide or free jet is also examined.

Sava, P. G.↗

The risk of renal stone formation during and after long duration space flight

BACKGROUND: The formation of a renal stone during space flight may have serious negative effects on the health of the crewmember and the success of the mission. Urinary biochemical factors and the influence of dietary factors associated with renal stone development were assessed during long duration Mir Space Station missions. METHODS: Twenty-four-hour urine samples were collected prior to, during and following long duration space flight. The relative urinary supersaturation of calcium oxalate, calcium phosphate (brushite), sodium urate, struvite and uric acid were determined. RESULTS: Changes in the urinary biochemistry of crewmembers during long duration spaceflight demonstrated increases in the supersaturation of the stone-forming salts. In-flight hypercalciuria was evident in a number of individual crewmembers and 24-hour dietary fluid intake and urine volume were significantly lower. During flight, there was a significant increase in brushite supersaturation. CONCLUSIONS: These data suggest acute effects of space flight and postflight changes in the urinary biochemistry favoring increased crystallization in the urine. The effects of dietary intake, especially fluid intake, may have a significant impact on the potential for renal stone formation. Efforts are now underway to assess the efficacy of a countermeasure to mitigate the increased risk.

manned↗

Verification of Anisotropic Mesh Adaptation for Turbulent Simulations over ONERA M6 Wing

Unstructured anisotropic mesh adaptation is known to be an efficient way to control discretization errors in Computational Fluid Dynamics (CFD) simulations. Method verification is required to provide the confidence for routine use in production analysis. The current work aims at verification of anisotropic mesh adaptation for RANS simulations over the ONERA M6 wing. The present verification study is performed using four different flow solvers, three different implementations of the metric field, and three mesh mechanics packages. Two of the flow solvers use stabilized finite-element discretizations (FUN3D-SFE and GGNS), one uses finite-volume discretization (FUN3D-FV), and the last one uses mixed finite-volume and finite element discretizations (Wolf). The mesh adaptation is based on an error estimator that aims to control the quadratic error term in the linear interpolation of Mach number. Two sets of adaptations were performed; the first one controls the interpolation error in L2 norm and the second one controls the interpolation error in L4 norm. Convergence studies were performed on the forces and the pitching moment using all four solvers, and the results are compared with previously verified convergence studies on fixed (nonadapted) meshes. Both forces and pitching moment on adapted meshes are found to be converging to the fine mesh values faster than those on fixed meshes. In addition to forces and moments, convergence of surface pressure and skin friction coefficients at various measurement locations on the wing are also presented. Adapted-mesh surface pressure distributions agree with the fine fixed mesh pressure distributions. Adapted-mesh skin friction distributions contain high frequency noise with mean values approaching the fixed mesh pressure skin friction distributions.

Aravind Balan↗

Scattering amplitude of ultracold atoms near the p-wave magnetic Feshbach resonance

Most of the current theories on the p-wave superfluid in cold atomic gases are based on the effective-range theory for the two-body scattering, where the low-energy p-wave scattering amplitude f{sub 1}(k) is given by f{sub 1}(k)=-1/[ik+1/(Vk{sup 2})+1/R]. Here k is the incident momentum, V and R are the k-independent scattering volume and effective range, respectively. However, due to the long-range nature of the van der Waals interaction between two colliding ultracold atoms, the p-wave scattering amplitude of the two atoms is not described by the effective-range theory [J. Math. Phys. 4, 54 (1963); Phys. Rev. A 58, 4222 (1998)]. In this paper we provide an explicit calculation for the p-wave scattering of two ultracold atoms near the p-wave magnetic Feshbach resonance. We show that in this case the low-energy p-wave scattering amplitude f{sub 1}(k)=-1/[ik+1/(V{sup eff}k{sup 2})+1/(S{sup eff}k)+1/R{sup eff}] where V{sup eff}, S{sup eff}, and R{sup eff} are k-dependent parameters. Based on this result, we identify sufficient conditions for the effective-range theory to be a good approximation of the exact scattering amplitude. Using these conditions we show that the effective-range theory is a good approximation for the p-wave scattering in the ultracold gases of {sup 6}Li and {sup 40}K when the scattering volume is enhanced by the resonance.

74 ATOMIC AND MOLECULAR PHYSICS↗

Numerical assessment of triply periodic minimal surfaces for direct air capture of carbon dioxide

Direct air capture (DAC) systems often consist of packing material wetted by a capture fluid that reacts with CO 2 in the airstream. The efficiency of the contactor is determined by a complex relationship of fluid dynamics, heat and mass transfer, contactor geometry, and chemical properties. The efficiency of the contactor must be balanced with other factors, primarily pressure drop through the system. Triply periodic minimal surfaces (TPMS) are a class of differential surfaces that have been explored in multiple engineering applications and have been shown to exhibit excellent performance when used in heat exchangers. Their tortuous path provides a high surface-to-volume ratio and favorable trade-off between contact area and pressure drop. In this work, a gyroid-type TPMS contactor was evaluated using computational fluid dynamics for a variety of geometric parameters to explore the potential benefit of TPMS shapes for DAC applications. A thin-film model was employed to model the flow and distribution of the capture solvent, allowing efficient simulations of TPMS structures at scale by eliminating the need for a computationally intensive interface capturing method. A liquid-gas mass transfer model was implemented in the commercial software STAR-CCM+ and used to predict the CO 2 capture efficiency and study the trade-off between capture performance and pressure drop through analysis of capture rates, mass transfer coefficients, and other relevant variables. TPMS contactors with a variety of geometric parameters and two capture solvent options were investigated to determine the effect of design choices on the operational performance of DAC systems. In conclusion, results showed that while contactor geometry is the dominant factor in efficiency and pressure drop, the physiochemical properties of the solvent are an important secondary influence on the contactor performance.

CFD↗