Search NASA⌕ Search

SEARCH · Search NASA

Results for “WASTE PROCESSING PLANTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Summary Report for the Analysis of the Sludge Batch 7a (Macrobatch 8) DWPF Pour Stream Glass Sample for Canister S03619

In order to comply with the Waste Acceptance Specifications in Sludge Batch 7a (Macrobatch 8), Savannah River National Laboratory personnel characterized the Defense Waste Processing Facility (DWPF) pour stream glass sample collected while filling canister S03619. This report summarizes the results of the compositional analysis for reportable oxides and radionuclides, and the normalized Product Consistency Test (PCT) results. The PCT responses indicate that the DWPF produced glass that is significantly more durable than the Environmental Assessment glass. Results and further details are documented in 'Analysis of DWPF Sludge Batch 7a (Macrobatch 8) Pour Stream Samples,' SRNL-STI-2012-00017.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Lunar hydrogen extraction

This paper examines the power and mass requirements of a lunar hydrogen extraction plant producing five metric tons of hydrogen per year. These power and mass requirements are based upon experimental work that determined gaseous hydrogen release rates from lunar samples at various heating rates and temperatures. An optimum heating temperature and rate can be selected to minimize the processing plant's power and mass requirements. The impact of thermal recovery on the power and mass requirements is studied, as is the use of nuclear waste heat for processing the regolith. In addition, the potential of using the extracted hydrogen in the form of methane as a propellant for a Lunar Excursion Vehicle is examined.

Snaufer, M. J.↗

A Remote Absorption Process for Disposal of Evaporate and Reverse Osmosis Concentrates

Many commercial nuclear plants and DOE facilities generate secondary waste streams consisting of evaporator bottoms and reverse osmosis (RO) concentrate. Since liquids are not permitted in disposal facilities, these waste streams must be converted to dry solids, either by evaporation to dried solids or by solidification to liquid-free solids. Evaporation of the liquid wastes reduces their volume, but requires costly energy and capital equipment. In some cases, concentration of the contaminants during drying can cause the waste to exceed Class A waste for nuclear utilities or exceed DOE transuranic limits. This means that disposal costs will be increased, or that, when the Barnwell, SC disposal site closes to waste outside of the Atlantic Compact in July 2008, the waste will be precluded from disposal for the foreseeable future). Solidification with cement agents requires less energy and equipment than drying, but results in a volume increase of 50-100%. The doubling or tripling of waste weight, along with the increased volume, sharply increases shipping and disposal costs. Confronted with these unattractive alternatives, Diversified Technologies Services (DTS), in conjunction with selected nuclear utilities and D and D operations at Rocky Flats, undertook an exploratory effort to convert this liquid wastewater to a solid without using cement. This would avoid the bulking effect of cement, and permit the waste to be disposed of the Energy Solutions facility in Utah as well as some DOE facilities. To address the need for an attractive alternative to drying and cement solidification, a test program was developed using a polymer absorbent media to convert the concentrate streams to a liquid-free waste form that meets the waste acceptance criteria of the pertinent burial sites. Two approaches for mixing the polymer with the liquid were tested: mechanical mixing and in-situ incorporation. As part of this test program, a process control program (PCP) was developed that is 100% scalable from a concentrate test sample as small as 50 grams to full-scale processing of 100 cubic foot containers or larger. In summary: The absorption process offers utilities a viable and less costly alternative to on-site drying or solidification of concentrates. The absorption process can be completed by site personnel or by a vendor as a turnkey service. The process is suitable for multiple types of waste, including RO and evaporator concentrates, sludges, and other difficult to process waters and wet solids. (author)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stabilization of Spherical Rescorcinol Resin in Grout- Maintenance of the Hanford Integrated Disposal Performance Assessment FY 2018

Operation of the low activity waste vitrification facility (LAW) part of the Waste Treatment and Immobilization Plant (WTP) at Hanford will generate several solid secondary waste (SSW) streams including used process equipment, contaminated tools and instruments, decontamination wastes, highefficiency particulate air filters (HEPA), carbon absorption beds, silver mordenite iodine sorbent beds, and spent ion exchange resins (IXr), all of which are to be disposed of in the Integrated Disposal Facility (IDF). The baseline treatment method in the IDF Performance Assessment (PA) for SSW is solidification/stabilization using cementitious material. The Hanford Mix 5 has been identified as the baseline grout for encapsulation of debris SSW (HEPA filters) and solidification/stabilization of non-debris SSW (carbon absorption beds, silver mordenite iodine sorbent beds, and spent ion exchange resins). Hanford Mix 5 is a blend of ASTM (C150-18) Type I-II cement (OPC), Class F fly ash (FA), water, BASF Pozzolith 80 and BASF Master Fiber M100 (fiber) that is currently used for disposal of debris in carbon steel containers (B25) in Hanford’s 200 West Area Low Level Waste Burial Ground trenches.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Controlled evolution of rare earth phosphate in coal ash slag

Coal ash slag as a waste by-product, is generated from commercial processes that include gasification facilities, power plants, and steelmaking industries. Some is recycled into construction materials, insulation fibers, and used as a soil neutralizer, but the majority is still discarded. Coal ash slag exhibit trace amounts of critical materials including rare earth elements (REEs). An economically viable extraction of REEs from the coal ash would lower the production costs, addressing the availability and environmental concerns. In nature, most REEs exist as phosphate such as monazite but its synthetic evolution in coal ash slag has never been reported. In industrial processes, P may originate from coal, additives, and/or refractory liners. REEs may be extracted by first concentrating REEs into phosphates, sulphide, or fluorides [1], or carbonates [2]. In this work, P-enriched coal ash slag bearing REEs was first melted above 1600 °C, then crystallization behaviors in the melt during controlled cooling was studied. REE phosphate coprecipitated with mullite and hematite with mullite being the first crystal to form on cooling. The REEs were rejected from the molten slag, mullite, and hematite, and tended to segregate only to the phosphate phase with REE concentration as high as 58 wt.% in the structure.

Nakano, Jinichiro↗

Controlled evolution of rare earth phosphate in coal ash slag

Coal ash slag as a waste by-product, is generated from commercial processes that include gasification facilities, power plants, and steelmaking industries. Some is recycled into construction materials, insulation fibers, and used as a soil neutralizer, but the majority is still discarded. Coal ash slag exhibit trace amounts of critical materials including rare earth elements (REEs). An economically viable extraction of REEs from the coal ash would lower the production costs, addressing the availability and environmental concerns. In nature, most REEs exist as phosphate such as monazite but its synthetic evolution in coal ash slag has never been reported. In industrial processes, P may originate from coal, additives, and/or refractory liners. REEs may be extracted by first concentrating REEs into phosphates, sulphide, or fluorides [1], or carbonates [2]. In this work, P-enriched coal ash slag bearing REEs was first melted above 1600 °C, then crystallization behaviors in the melt during controlled cooling was studied. REE phosphate coprecipitated with mullite and hematite with mullite being the first crystal to form on cooling. The REEs were rejected from the molten slag, mullite, and hematite, and tended to segregate only to the phosphate phase with REE concentration as high as 58 wt.% in the structure.

Nakano, Jinichiro↗

Hanford WTP LAW Melter Startup and Tuning Feed Material Development - 17065

The U.S. Department of Energy's (DOE) Hanford Site in southeast Washington state is home to 56 million gallons of chemical and radioactive waste stored in underground tanks, the result of more than four decades of plutonium production. To address this challenge, the U.S. Department of Energy contracted Bechtel National, Inc., to design and build the world's largest radioactive waste treatment plant. The Hanford Tank Waste Treatment and Immobilization Plant (WTP) will use vitrification to immobilize most of Hanford's waste. Vitrification involves blending the waste with glass-forming materials, and heating it to high temperature to form molten glass, then pouring it into stainless steel containers. In this glass form, its radioactivity will decay over hundreds to thousands of years. In advance of full operation of WTP, a sequential process of commissioning will be undertaken to ensure the plant operates safely and within design requirements. The first phase of WTP operations will focus on the Low-Activity Waste (LAW) Vitrification Facility and its supporting facilities and systems. Commissioning of the LAW Facility will employ a progressive approach to address the complexity of system operation and introduction of hazards. This approach starts with introduction of low hazard and simple testing configurations, and incrementally increasing the complexity and hazardous makeup of testing feed materials, culminating in fully integrated treatment of radioactive tank waste during hot commissioning. Testing with simulants that are chemically similar to radioactive tank waste introduces significant chemical hazards into treatment systems in the form of nitrogen oxides (NOx) and anhydrous ammonia. A method of testing to allow tuning and demonstration of equipment and to develop operator proficiency prior to introducing these chemical hazards was deemed necessary. To that end, the development and testing of a new 'tuning feed' material is in progress. The tuning feed is important because its use will enable the first-time integration of all LAW Facility process systems. The tuning feed must include key physical and chemical characteristics that correspond to the commissioning simulant and low activity tank waste, without the inherently hazardous materials or toxic off-gas constituents that result from tank waste treatment. Tuning feed is being developed to provide representative melter feed rheology, glass chemistry, cold cap formation, and off-gas generation rate in order to predict system response to actual tank waste to the extent practical. The tuning feed must also be compatible with process equipment and other process streams that will be encountered during the cold commissioning testing program. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Analysis of energy recovery potential using innovative technologies of waste gasification

Highlights: Black-Right-Pointing-Pointer Energy recovery from waste by gasification was simulated. Black-Right-Pointing-Pointer Two processes: high temperature gasification and gasification associated to plasma. Black-Right-Pointing-Pointer Two types of feeding waste: Refuse Derived Fuel (RDF) and pulper residues. Black-Right-Pointing-Pointer Different configurations for the energy cycles were considered. Black-Right-Pointing-Pointer Comparison with performances from conventional Waste-to-Energy process. - Abstract: In this paper, two alternative thermo-chemical processes for waste treatment were analysed: high temperature gasification and gasification associated to plasma process. The two processes were analysed from the thermodynamic point of view, trying to reconstruct two simplified models, using appropriate simulation tools and some support data from existing/planned plants, able to predict the energy recovery performances by process application. In order to carry out a comparative analysis, the same waste stream input was considered as input to the two models and the generated results were compared. The performances were compared with those that can be obtained from conventional combustion with energy recovery process by means of steam turbine cycle. Results are reported in terms of energy recovery performance indicators as overall energy efficiency, specific energy production per unit of mass of entering waste, primary energy source savings, specific carbon dioxide production.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Coupling Waste Feedstocks to Microbial Protein for a Circular Food System

The global food system is responsible for approximately 34% of annual greenhouse gas (GHG) emissions and up to 85% of water consumption. This critical sector suffers from intensive and inefficient land and water use, the generation of multiple (solid, liquid, and gaseous) waste streams, and high fuel, fertilizer, and pesticide consumption. The production of waste-derived microbial protein (MP) represents a promising alternative for reducing the environmental impacts of protein production relative to conventional agriculture. MP can be mass-produced in volumetrically scalable cultivation processes on short timescales, enabling facile up-scaling with lower greenhouse gas emissions, land use, and water impacts than animal and, in some cases, plant protein production. MP can also be produced from waste feedstocks, diverting waste from landfills or the natural environment. Here, we present the availability and suitability of waste feedstocks for MP production, as well as the fermentation and downstream processes required to convert MP into human food products. We discuss the challenges and opportunities facing waste-derived bacterial MP and highlight key areas for innovation in both the microbiology and process design space for a more sustainable and circular food system.

BASIC BIOLOGICAL SCIENCES,ENERGY PLANNING, POLICY,↗

Cesium Removal from AP-105 Hanford Tank Waste Using Spherical Resorcinol Formaldehyde Resin

Spherical resorcinol formaldehyde (SRF) resin is planned to be used to remove cesium (137Cs) from the aqueous phases of Hanford tank wastes in preparation for their vitrification at the Waste Treatment and Immobilization Plant. SRF is an elutable organic ion exchanger that is projected to be used in up to 30multiple process cycles (load/elute/regeneration) before being disposal . Only two full process cycles have been tested using SRF on Hanford tank waste. This paper describes the test results of six complete load/elute cycles using the SRF in a lead/lag column format with 12 liters of Hanford tank waste supernatant collected from Tank AP-105. The testing exposed the SRF to the combined sources of degradation: chemical attack from dissolved oxygen, nitric acid, and tank waste components; physical stress from resin expansion and contraction; and beta and gamma radiolytic exposure. Process conditions, dictated by Washington River Protection Solutions, featured loading until the lag column effluent reached 10% of the waste acceptance criteria (a Cs decontamination factor of 6,000). Under these conditions the lead column was nearly fully loaded and the lag column was loaded with about 20% of the input Cs. Variations in process flowrates and elution volumes were investigated as part of the testing. Characteristics examined included degradation with cycling, mass transfer zones as a function of flowrate, Cs leakage into the ensuing process cycle, and analyte mass fractionation.

spherical resorcincol formaldehyde, ion exchange, ↗

Radiological Monitoring of Waste Treatment Plant

Scheduled waste in West Malaysia is handled by Concession Company and is stored and then is incinerated. It is known that incineration process may result in naturally occurring radioactive materials (NORM) to be concentrated. In this study we have measured three samples consist of by-product from the operation process such as slag, filter cake and fly ash. Other various environmental media such as air, surface water, groundwater and soil within and around the plant have also been analysed for their radioactivity levels. The concentration of Ra-226, Ac-228 and K-40 in slag are 0.062 Bq/g, 0.016 Bq/g and 0.19 Bq/g respectively. The total activity (Ra{sub eq}) in slag is 99.5 Bq/kg. The concentration in fly ash is 0.032 Bq/g, 0.16 Bq/g and 0.34 Bq/g for Ra-226, Ac-228 and K-40 respectively resulting in Raeq of 287.0 Bq/kg. For filter cake, the concentration is 0.13 Bq/g, 0.031 Bq/g and 0.33 Bq/g for Ra-226, Ac-228 and K-40 respectively resulting in Raeq of 199.7 Bq/kg. The external radiation level ranges from 0.08 {mu}Sv/h (Administrative building) to 0.35 {mu}Sv/h (TENORM storage area). The concentration level of radon and thoron progeny varies from 0.0001 to 0.0016 WL and 0.0006 WL to 0.002 WL respectively. For soil samples, the activity ranges from 0.11 Bq/g to 0.29 Bq/g, 0.06 Bq/g to 0.18 Bq/g and 0.065 Bq/g to 0.38 Bq/g for Ra-226, Ac-228 and K-40 respectively. While activity in water, except for a trace of K-40, it is non-detectable.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sludge batch 9 (SB9) acceptance evaluation. Radionuclide concentrations in tank 51 SB9 qualification sample prepared at SRNL

Presented in this report are radionuclide concentrations required as part of the program of qualifying Sludge Batch 9 (SB9) for processing in the Defense Waste Processing Facility (DWPF). The SB9 material is currently in Tank 51 and has been washed and prepared for transfer to Tank 40. The acceptance evaluation needs to be completed prior to the transfer of the material in Tank 51 to Tank 40. The sludge slurry in Tank 40 has already been qualified for DWPF processing and is currently being processed as Sludge Batch 8 (SB8). The radionuclide concentrations were measured or estimated in the Tank 51 SB9 Washed Qualification Sample prepared at Savannah River National Laboratory (SRNL). This sample was prepared from a three liter sample of Tank 51 sludge slurry (HTF-51-15-81) taken on July 23, 2015. The sample was delivered to SRNL where it was initially characterized in the Shielded Cells. Under the direction of Savannah River Remediation (SRR) it was then adjusted per the Tank Farm washing strategy as of October 20, 2015. This final slurry now has a composition expected to be similar to that of the slurry in Tank 51 after final preparations have been made for transfer of that slurry to Tank 40.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Product Quality Assessment of Glass Formulations for High Sodium Nuclear Waste Streams - 18198

Sodium carbonate is currently being considered as a wash-out reagent for the removal of the settled solids in the unagitated Highly Active Liquor (HAL) storage tanks at Sellafield. As the settled solids are expected to comprise mainly zirconium molybdate (ZM), this will result in a feed to the Waste Vitrification Plant (WVP) containing high concentrations of both molybdenum and sodium. This feed is expected to be challenging for WVP due to solubility limitations in existing base glass compositions and the operating temperature. In particular, depending on the wash-out strategy employed, there is the potential to produce high volumes of sodium-containing waste, which will result in large quantities of vitrified HLW containers. Hence, new glass compositions are being investigated as part of a 3-year Innovate UK-funded collaborative project in order to maximise the sodium content of the vitrified product and minimise the number of containers produced. This paper describes the product quality assessment of several sodium titanosilicate (NaTiSi) compositions that can potentially contain up to ∼15 wt% waste Na{sub 2}O, more than double what is possible using the current UK HLW glass borosilicate composition. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Westinghouse modular grinding process - improvement for follow on processes

In nuclear power plants (NPP) ion exchange (IX) resins are used in several systems for water treatment. The resins can be in bead or powdered form. For waste treatment of spent IX resins, two methods are basically used: Direct immobilization (e.g. with cement, bitumen, polymer or High Integrity Container (HIC)); Thermal treatment (e.g. drying, oxidation or pyrolysis). Bead resins have some properties (e.g. particle size and density) that can have negative impacts on following waste treatment processes. Negative impacts could be: Floatation of bead resins in cementation process; Sedimentation in pipeline during transportation; Poor compaction properties for Hot Resin Supercompaction (HRSC). Reducing the particle size of the bead resins can have beneficial effects enhancing further treatment processes and overcoming prior mentioned effects. Westinghouse Electric Company has developed a modular grinding process to crush/grind the bead resins. This modular process is designed for flexible use and enables a selective adjustment of particle size to tailor the grinding system to the customer needs. The system can be equipped with a crusher integrated in the process tank and if necessary a colloid mill. The crusher reduces the bead resins particle size and converts the bead resins to a pump able suspension with lower sedimentation properties. With the colloid mill the resins can be ground to a powder. Compared to existing grinding systems this equipment is designed to minimize radiation exposure of the worker during operation and maintenance. Using the crushed and/or ground bead resins has several beneficial effects like facilitating cementation process and recipe development, enhancing oxidation of resins, improving the Hot Resin Supercompaction volume reduction performance. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Emerging Technologies and Techniques for Wide Area Radiological Survey and Remediation

Technologies to survey and decontaminate wide-area contamination and process the subsequent radioactive waste have been developed and implemented following the Chernobyl nuclear power plant release and the breach of a radiological source resulting in contamination in Goiania, Brazil. These civilian examples of radioactive material releases provided some of the first examples of urban radiological remediation. Many emerging technologies have recently been developed and demonstrated in Japan following the release of radioactive cesium isotopes (Cs-134 and Cs-137) from the Fukushima Dai-ichi nuclear power plant in 2011. Information on technologies reported by several Japanese government agencies, such as the Japan Atomic Energy Agency (JAEA), the Ministry of the Environment (MOE) and the National Institute for Environmental Science (NIES), together with academic institutions and industry are summarized and compared to recently developed, deployed and available technologies in the United States. The technologies and techniques presented in this report may be deployed in response to a wide area contamination event in the United States. In some cases, additional research and testing is needed to adequately validate the technology effectiveness over wide areas. Survey techniques can be deployed on the ground or from the air, allowing a range of coverage rates and sensitivities. Survey technologies also include those useful in measuring decontamination progress and mapping contamination. Decontamination technologies and techniques range from non-destructive (e.g., high pressure washing) and minimally destructive (plowing), to fully destructive (surface removal or demolition). Waste minimization techniques can greatly impact the long-term environmental consequences and cost following remediation efforts. Recommendations on technical improvements to address technology gaps are presented together with observations on remediation in Japan.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Surrogate modeling and optimization of the leaching process in a rare earth elements recovery plant

Critical minerals (CMs) and Rare Earth Elements (REEs) play a vital role in crucial infrastructure technologies such as renewable energy generation and batteries. Recovering them from waste materials has recently been found to significantly reduce environmental impact and supply chain costs related to these materials. In this work, we investigate surrogate modeling techniques aimed to simplify the modeling, simulation, and optimization of the leaching processes involved in CM and REE recovery flowsheets. As there is currently a lack of systematic studies on this topic, we perform extensive computational testing to ascertain which surrogate models are easier to construct and offer high predictive accuracy. Further, our results suggest that sparse quadratic models balance predictive accuracy and computational efficiency. Training and using these surrogates for global optimization of the leaching process requires two orders of magnitude fewer measurements and is up to four orders of magnitude faster than optimizing the original simulation using equation-oriented optimization or derivative-free optimization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

BLENDING ANALYSIS FOR RADIOACTIVE SALT WASTE PROCESSING FACILITY

Savannah River National Laboratory (SRNL) evaluated methods to mix and blend the contents of the blend tanks to ensure the contents are properly blended before they are transferred from the blend tank such as Tank 21 and Tank 24 to the Salt Waste Processing Facility (SWPF) feed tank. The tank contents consist of three forms: dissolved salt solution, other waste salt solutions, and sludge containing settled solids. This paper focuses on developing the computational model and estimating the operation time of submersible slurry pump when the tank contents are adequately blended prior to their transfer to the SWPF facility. A three-dimensional computational fluid dynamics approach was taken by using the full scale configuration of SRS Type-IV tank, Tank 21H. Major solid obstructions such as the tank wall boundary, the transfer pump column, and three slurry pump housings including one active and two inactive pumps were included in the mixing performance model. Basic flow pattern results predicted by the computational model were benchmarked against the SRNL test results and literature data. Tank 21 is a waste tank that is used to prepare batches of salt feed for SWPF. The salt feed must be a homogeneous solution satisfying the acceptance criterion of the solids entrainment during transfer operation. The work scope described here consists of two modeling areas. They are the steady state flow pattern calculations before the addition of acid solution for tank blending operation and the transient mixing analysis during miscible liquid blending operation. The transient blending calculations were performed by using the 95% homogeneity criterion for the entire liquid domain of the tank. The initial conditions for the entire modeling domain were based on the steady-state flow pattern results with zero second phase concentration. The performance model was also benchmarked against the SRNL test results and literature data.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗