Search NASA⌕ Search

SEARCH · Search NASA

Results for “WIND MODELING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Synthesis of line profiles from models of structured winds

On the basis of a careful analysis of resonance line formation (both for singlets and doublets) in structured winds, present time dependent models of the line driven winds of hot stars are shown to be able to explain a number of observational features with respect to variability and structure: they are (in principle) able to reproduce the black and broad troughs (without any artificial 'turbulence velocity') and the 'blue edge variability' observed in saturate resonance lines: they might explain the 'long lived narrow absorption components' often observed in unsaturated lines at high velocities; they predict a relation between the 'edge velocity' of UV-lines and the radiation temperature of the observed X-ray emission. As a first example of the extent to which theoretical models can be constrained by comparisons between observations and profiles calculated by spectrum synthesis from structured winds, we show here that models with deep-seated onset of structure formation (approximately greater than 1.1 R(sub *)) produce resonance lines which agree qualitatively with observational findings; in contrast, the here presented models with structure formation only well out in the wind (approximately greater than 1.6 R(sub *) fail in this respect.

Puls, J.↗

Comparison of Surface Pressure Fluctuations from Flight and Wind Tunnel Tests on the Orion Multi-Purpose Crew Vehicle

Transonic and supersonic wind-tunnel test of scaled-models are used to predict the surface pressure fluctuations on aerospace vehicles. An outstanding question is how good are such tests? The present paper attempts to answer this question for the Multi-Purpose Crew Vehicle by comparing data from the Ascent Abort-2 (AA2) flight test with those measured in two different scaled-model wind tunnel tests (WTT) 51AS and 134AS. A sensor by sensor and a Mach by Mach comparisons of spectra of surface pressure fluctuations are presented for nominal ascent part of flight. Spectra measured over a large part of the vehicle surface were found to be dominated by the wake vortices shed from the four Abort Motor nozzles situated on the upper part of the Launch Abort System. It was found that the shapes of the scaled-up spectra from WTTs were very close to those measured in the flight, but the levels, for the most part, were found to be lower than the flight data. The highest differences were from the regions of complex flows where wakes from the adjacent nozzles interacted with the free-stream flow. There the WTT predicted levels were consistently 2dB to 6dB lower than the flight data, across all spectral bands. Another region of significant under-prediction was the local separated flow region at the Fillet-Ogive junction. The accuracy of the sharp spectral peaks from regions along a nozzle axis was found to be dependent on the fidelity of the model. The model in the 51AS WTT used a simplified contour, which resulted in a large under prediction of the spectral peak by 1dB to 10dB. A limited number of data from 134AS, where the model accurately captured all features of the nozzles of the flight vehicle, however; showed that the under prediction was lower: 1-2dB. The fluctuation spectra on the large protuberance of the Umbilical Cover was found to be reasonably well-predicted by 134AS WTT, which meticulously reproduced a scaled-down shape of this protuberance. Such information will help to determine the margins to be applied to wind-tunnel data to create flight environments.

MPCV↗

Plasma physical parameters along CME-driven shocks. II. Observation–simulation comparison

In this work, we compare the spatial distribution of the plasma parameters along the 1999 June 11 coronal mass ejection (CME)-driven shock front with the results obtained from a CME-like event simulated with the FLIPMHD3D code, based on the FLIP-MHD particle-in-cell method. The observational data are retrieved from the combination of white-light coronagraphic data (for the upstream values) and the application of the Rankine–Hugoniot equations (for the downstream values). The comparison shows a higher compression ratio X and Alfvénic Mach number M{sub A} at the shock nose, and a stronger magnetic field deflection d toward the flanks, in agreement with observations. Then, we compare the spatial distribution of M{sub A} with the profiles obtained from the solutions of the shock adiabatic equation relating M{sub A}, X, and θ{sub Bn} (the angle between the upstream magnetic field and the shock front normal) for the special cases of parallel and perpendicular shock, and with a semi-empirical expression for a generically oblique shock. The semi-empirical curve approximates the actual values of M{sub A} very well, if the effects of a non-negligible shock thickness δ{sub sh} and plasma-to magnetic pressure ratio β{sub u} are taken into account throughout the computation. Moreover, the simulated shock turns out to be supercritical at the nose and sub-critical at the flanks. Finally, we develop a new one-dimensional Lagrangian ideal MHD method based on the GrAALE code, to simulate the ion-electron temperature decoupling due to the shock transit. Two models are used, a simple solar wind model and a variable-γ model. Both produce results in agreement with observations, the second one being capable of introducing the physics responsible for the additional electron heating due to secondary effects (collisions, Alfvén waves, etc.).

79 ASTRONOMY AND ASTROPHYSICS↗

Modelos de riesgo de colision: una herramienta para evaluar los riesgos para las aves rapaces en instalaciones de energia eolica (Spanish)

In January 2022, the International Energy Agency Wind Task 34 - Working Together to Resolve the Environmental Effects of Wind Energy (WREN) - organized a forum to discuss aspects of raptor collision risk with wind turbines. The forum included experts in raptor biology and physiology, collision risk modeling, wind energy development, and atmospheric scientists from seven countries. They represented a range of international stakeholder groups including academia, government agencies, national laboratories, and wildlife consultants. This educational brief summarizes the discussion during the forum and written comments from those who could not attend. Relevant literature was used to provide additional context when needed. For several species of raptors, such as golden eagles (Aquila chrysaetos), griffon vultures (Gyps fulvus) and white-tailed eagles (Haliaatus albicilla), collision risk with wind turbines continues to be a concern among stakeholders. These concerns include the potential population-level impact related to collisions, compliance with regulatory mechanisms for protected species, and the ability to generate renewable energy. To make siting and operational decisions, stakeholders require some level of certainty of the risk associated with a proposed project. Understanding this risk, in part, requires species-specific data on raptors and how they perceive and interact with wind farms or individual wind turbines. Collision risk models (CRMs) are a tool, often used in environmental impact assessments, that can provide estimates of risk relative to specific turbines or an entire wind farm. However, questions associated with the uncertainty in CRM estimates remain. This is the Spanish translation of NREL/FS-5000-84747, "Collision Risk Modeling - A Tool for Assessing Risks to Raptors at Wind Energy Facilities."

collision risk↗

Thermodynamic Profiling Through ASSIST Observations and TROPoe Retrievals

This report reviews the most relevant theoretical aspects of thermodynamic profiling techniques based on spectral observations from ASSIST-II infrared radiometers and TROPoe retrievals. The ASSIST+TROPoe system is a cutting-edge remote sensing technology deployed during the AWAKEN and WFIP3 field campaigns to estimate high-frequency profiles of temperature and humidity in the atmosphere. These profiles are highly valuable for characterizing atmospheric stratification, improving wind models, and understanding the impacts of wind plants on the climate. In this document, we discuss the operating principles of ASSIST, the physics of atmospheric infrared radiation, and the mathematical framework and capabilities of TROPoe. Sources of uncertainties in both the instrument and the retrieval method are also thoroughly addressed. This guide is designed to help users of ASSIST, TROPoe, and thermodynamic data in collecting, estimating, and applying thermodynamic profiles rigorously and scientifically.

17 WIND ENERGY↗

Anomalous meridional thermospheric neutral winds in the AE-E NATE data: Effects of the equatorial nighttime pressure bulge

The work described here makes it possible to identify anomalous wind behavior such as the nighttime meridional wind abatements that occur at F-region heights. A new analysis technique uses a simple empirical wind model to simulate measurements of 'normal' winds (as measured by the Neutral Atmosphere and Temperature Experiment (NATE) that flew on the Atmosphere Explorer-E (AE-E)) to highlight anomalous wind measurements made by the satellite while in circular orbits at 270-290 km altitude. Our approach is based on the recognition that the 'in orbit' wind variation must show the combined effects of the diurnal wind variation as seen from the ground with the latitude variation of the satellite orbit. For the data period 77250-78035 examined thus far, the wind abatement always occurred with a corresponding pressure or temperature maximum, and was detected on 12 out of the 36 nights with data. This study has revealed that the wind abatement occur only during or shortly after increases in solar extreme ultraviolet (EUV) flux, as indicated by daily radio flux measurements. In the past, nighttime wind reversals at mid-latitudes have been associated with increased geomagnetic activity. This study indicates that intensified solar EUV heating may be responsible for anomalous thermospheric nighttime winds at mid-latitudes.

Goembel, L.↗

High resolution wind measurements for offshore wind energy development

A method, apparatus, system, article of manufacture, and computer readable storage medium provide the ability to measure wind. Data at a first resolution (i.e., low resolution data) is collected by a satellite scatterometer. Thin slices of the data are determined. A collocation of the data slices are determined at each grid cell center to obtain ensembles of collocated data slices. Each ensemble of collocated data slices is decomposed into a mean part and a fluctuating part. The data is reconstructed at a second resolution from the mean part and a residue of the fluctuating part. A wind measurement is determined from the data at the second resolution using a wind model function. A description of the wind measurement is output.

Nghiem, Son Van↗

The response of an equatorial ocean to simple wind stress patterns. I - Model formulation and analytic results. II - Numerical results

A time-dependent, primitive equation, beta plane model that is two-dimensional in the horizontal has been developed to model wind-driven equatorial ocean circulation. A simple vertical structure consisting of two layers above the thermocline with the same constant density permits a steady-state undercurrent in the model. An analytical study of the linear dynamics of the model suggests that the addition of inertial effects is needed to simulate the undercurrent properly. Also, both linear and nonlinear dynamics of the model are investigated numerically. Such nonlinear response to wind stress as a strong eastward equatorial undercurrent and an intense eastward 'countercurrent' at three deg N are noted in the numerical results.

Cane, M. A.↗

Utilisation of real-scale renewable energy test facility for validation of generic wind turbine and wind power plant controller models

This article presents an example of application of a modern test facility conceived for experiments regarding the integration of renewable energy in the power system. The capabilities of the test facility are used to validate dynamic simulation models of wind power plants and their controllers. The models are based on standard and generic blocks. The successful validation of events related to the control of active power (control phenomena in <10 Hz range, including frequency control and power oscillation damping) is described, demonstrating the capabilities of the test facility and drawing the track for future work and improvements.

17 WIND ENERGY↗

Active Subspaces for Wind Plant Surrogate Modeling

Understanding the uncertainty in wind plant performance is crucial to their cost-effective design and operation. However, conventional approaches to uncertainty quantification (UQ), such as Monte Carlo techniques or surrogate modeling, are often computationally intractable for utility-scale wind plants because of poor congergence rates or the curse of dimensionality. In this paper we demonstrate that wind plant power uncertainty can be well represented with a low-dimensional active subspace, thereby achieving a significant reduction in the dimension of the surrogate modeling problem. We apply the active sub-spaces technique to UQ of plant power output with respect to uncertainty in turbine axial induction factors, and find a single active subspace direction dominates the sensitivity in power output. When this single active subspace direction is used to construct a quadratic surrogate model, the number of model unknowns can be reduced by up to 3 orders of magnitude without compromising performance on unseen test data. We conclude that the dimension reduction achieved with active subspaces makes surrogate-based UQ approaches tractable for utility-scale wind plants.

17 WIND ENERGY↗

Vector wind profile gust model

Work towards establishing a vector wind profile gust model for the Space Transportation System flight operations and trade studies is reported. To date, all the statistical and computational techniques required were established and partially implemented. An analysis of wind profile gust at Cape Kennedy within the theoretical framework is presented. The variability of theoretical and observed gust magnitude with filter type, altitude, and season is described. Various examples are presented which illustrate agreement between theoretical and observed gust percentiles. The preliminary analysis of the gust data indicates a strong variability with altitude, season, and wavelength regime. An extension of the analyses to include conditional distributions of gust magnitude given gust length, distributions of gust modulus, and phase differences between gust components has begun.

Adelfang, S. I.↗

Vector wind profile gust model

To enable development of a vector wind gust model suitable for orbital flight test operations and trade studies, hypotheses concerning the distributions of gust component variables were verified. Methods for verification of hypotheses that observed gust variables, including gust component magnitude, gust length, u range, and L range, are gamma distributed and presented. Observed gust modulus has been drawn from a bivariate gamma distribution that can be approximated with a Weibull distribution. Zonal and meridional gust components are bivariate gamma distributed. An analytical method for testing for bivariate gamma distributed variables is presented. Two distributions for gust modulus are described and the results of extensive hypothesis testing of one of the distributions are presented. The validity of the gamma distribution for representation of gust component variables is established.

Adelfang, S. I.↗

Assessing the Importance of Nonlinearities in the Development of a Substructure Model for the Wind Turbine CAE Tool FAST: Preprint

Design and analysis of wind turbines are performed using aero-servo-elastic tools that account for the nonlinear coupling between aerodynamics, controls, and structural response. The NREL-developed computer-aided engineering (CAE) tool FAST also resolves the hydrodynamics of fixed-bottom structures and floating platforms for offshore wind applications. This paper outlines the implementation of a structural-dynamics module (SubDyn) for offshore wind turbines with space-frame substructures into the current FAST framework, and focuses on the initial assessment of the importance of structural nonlinearities. Nonlinear effects include: large displacements, axial shortening due to bending, cross-sectional transverse shear effects, etc.

17 WIND ENERGY↗

Multibody Modeling and Simulation for the Mars Phoenix Lander Entry, Descent and Landing

A multi-body flight simulation for the Phoenix Mars Lander has been developed that includes high fidelity six degree-of-freedom rigid-body models for the parachute and lander system. The simulation provides attitude and rate history predictions of all bodies throughout the flight, as well as loads on each of the connecting lines. In so doing, a realistic behavior of the descending parachute/lander system dynamics can be simulated that allows assessment of the Phoenix descent performance and identification of potential sensitivities for landing. This simulation provides a complete end-to-end capability of modeling the entire entry, descent, and landing sequence for the mission. Time histories of the parachute and lander aerodynamic angles are presented. The response of the lander system to various wind models and wind shears is shown to be acceptable. Monte Carlo simulation results are also presented.

Queen, Eric M.↗

The design of models for cryogenic wind tunnels

Factors to be considered in the design and fabrication of models for cryogenic wind tunnels include high model loads imposed by the high operating pressures, the mechanical and thermodynamic properties of materials in low temperature environments, and the combination of aerodynamic loads with the thermal environment. Candidate materials are being investigated to establish criteria for cryogenic wind tunnel models and their installation. Data acquired from these tests will be provided to users of the National Transonic Facility.

Gillespie, V. P.↗

MODELING THE MULTIWAVELENGTH LIGHT CURVES OF PSR B1259-63/LS 2883. II. THE EFFECTS OF ANISOTROPIC PULSAR WIND AND DOPPLER BOOSTING

PSR B1259-63/LS 2883 is a binary system in which a 48 ms pulsar orbits around a Be star in a high eccentric orbit with a long orbital period of about 3.4 yr. It is special for having asymmetric two-peak profiles in both the X-ray and TeV light curves. Recently, an unexpected GeV flare has been detected by the Fermi gamma-ray observatory several weeks after the last periastron passage. In this paper, we show that this observed GeV flare could be produced by the Doppler-boosted synchrotron emission in the bow-shock tail. An anisotropic pulsar wind model, which mainly affects the energy flux injection into the termination shock in a different orbital phase, is also used in this paper, and we find that the anisotropy in the pulsar wind can play a significant role in producing the asymmetric two-peak profiles in both X-ray and TeV light curves. The X-ray and TeV photons before periastron are mainly produced by the shocked electrons around the shock apex, and the light curves after periastron are contributed by the emission from the shock apex and the shock tail together, which result in asymmetric two-peak light curves.

79 ASTRONOMY AND ASTROPHYSICS↗

Analysis of Wind Turbine Simulation Models: Assessment of Simplified versus Complete Methodologies: Preprint

This paper presents the current status of simplified wind turbine models used for power system stability analysis. This work is based on the ongoing work being developed in IEC 61400-27. This international standard, for which a technical committee was convened in October 2009, is focused on defining generic (also known as simplified) simulation models for both wind turbines and wind power plants. The results of the paper provide an improved understanding of the usability of generic models to conduct power system simulations.

17 WIND ENERGY↗

Charge States and FIP Bias of the Solar Wind from Coronal Holes, Active Regions, and Quiet Sun

Connecting in situ measured solar-wind plasma properties with typical regions on the Sun can provide an effective constraint and test to various solar wind models. We examine the statistical characteristics of the solar wind with an origin in different types of source regions. We find that the speed distribution of coronal-hole (CH) wind is bimodal with the slow wind peaking at ∼400 km s{sup −1} and the fast at ∼600 km s{sup −1}. An anti-correlation between the solar wind speeds and the O{sup 7+}/O{sup 6+} ion ratio remains valid in all three types of solar wind as well during the three studied solar cycle activity phases, i.e., solar maximum, decline, and minimum. The N{sub Fe}/N{sub O} range and its average values all decrease with the increasing solar wind speed in different types of solar wind. The N{sub Fe}/N{sub O} range (0.06–0.40, first ionization potential (FIP) bias range 1–7) for active region wind is wider than for CH wind (0.06–0.20, FIP bias range 1–3), while the minimum value of N{sub Fe}/N{sub O} (∼ 0.06) does not change with the variation of speed, and it is similar for all source regions. The two-peak distribution of CH wind and the anti-correlation between the speed and O{sup 7+}/O{sup 6+} in all three types of solar wind can be explained qualitatively by both the wave-turbulence-driven and reconnection-loop-opening (RLO) models, whereas the distribution features of N{sub Fe}/N{sub O} in different source regions of solar wind can be explained more reasonably by the RLO models.

79 ASTRONOMY AND ASTROPHYSICS↗