Search NASA⌕ Search

SEARCH · Search NASA

Results for “atomically thin”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Detecting Density Variations and Nanovoids

A combination of simulated and experimental data has been used to investigate the size range of nanovoids that can be detected in atom probe tomography data. Simulated atom probe tomography data have revealed that nanovoids as small as 1 nm in diameter can be detected in atom probe tomography data with the use of iso-density surfaces. Iso-density surfaces may be used to quantify the size, morphology and number density of nanovoids and other variations in density in atom probe tomography data. Experimental data from an aluminum-yttrium-iron metallic glass ribbon have revealed the effectiveness of this approach. Combining iso-density surfaces with atom maps also permits the segregation of solute to the nanovoids to be investigated. Field ion microscopy and thin section atom maps have also been used to detect pores and larger voids.

99 GENERAL AND MISCELLANEOUS↗

Sodium Intercalation of Graphene Films on Re(101̄0)

It is shown that during low-temperature (300–500 K) intercalation of sodium atoms into thin multilayer graphene and graphite films on rhenium the first graphene layer plays the role of a trap to which atoms coming on the surface diffuse through a graphite film. The intercalation phase of the interlayer space in the graphite bulk is actively filled at a sodium atoms concentration under the first graphene layer close to the maximum possible (2 ± 0.5) × 10{sup 14} cm{sup –2}. This phase capacity is proportional to the graphite film thickness that can be varied in this work from one graphene layer to ~50 atomic layers. The diffusion energy E{sub d} of Na atoms through the graphite film was estimated to be E{sub d} ≈ 1.4 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transition in electron scattering mechanism in atomic layer deposited Nb:TiO{sub 2} thin films

We characterized transport and optical properties of atomic layer deposited Nb:TiO{sub 2} thin films on glass substrates. These promising transparent conducting oxide (TCO) materials show minimum resistivity of 1.0 × 10{sup −3 }Ω cm at 300 K and high transmittance in the visible range. Low-temperature (2–300 K) Hall measurements and the Drude fitting of the Vis-NIR optical spectra indicate a transition in the scattering mechanism from grain boundary scattering to intra-grain scattering with increasing Nb content, thus underlining enhancement of the grain size in the low doping regime as the key for further improved TCO properties.

36 MATERIALS SCIENCE↗

Barrier performance optimization of atomic layer deposited diffusion barriers for organic light emitting diodes using x-ray reflectivity investigations

The importance of O{sub 3} pulse duration for encapsulation of organic light emitting diodes (OLEDs) with ultra thin inorganic atomic layer deposited Al{sub 2}O{sub 3} layers is demonstrated for deposition temperatures of 50 °C. X-ray reflectivity (XRR) measurements show that O{sub 3} pulse durations longer than 15 s produce dense and thin Al{sub 2}O{sub 3} layers. Correspondingly, black spot growth is not observed in OLEDs encapsulated with such layers during 91 days of aging under ambient conditions. This implies that XRR can be used as a tool for process optimization of OLED encapsulation layers leading to devices with long lifetimes.

36 MATERIALS SCIENCE↗

Near atomically smooth alkali antimonide photocathode thin films

Nano-roughness is one of the major factors degrading the emittance of electron beams that can be generated by high efficiency photocathodes, such as the thermally reacted alkali antimonide thin films. In this paper, we demonstrate a co-deposition based method for producing alkali antimonide cathodes that produce near atomic smoothness with high reproducibility. Here, we calculate the effect of the surface roughness on the emittance and show that such smooth cathode surfaces are essential for operation of alkali antimonide cathodes in high field, low emittance radio frequency electron guns and to obtain ultracold electrons for ultrafast electron diffraction applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancing Coking Tolerance and Stability of SOFC Anodes Using Atomic Layer Deposition (ALD) of Oxide Thin Films

The overall objective of this project was to use atomic layer deposition (ALD) to add modifiers to the surfaces of conventional Ni-YSZ cermet, solid oxide fuel cell (SOFC) anodes to enhance both their tolerance to hydrocarbon fuels by decreasing their propensity to form coke deposits, and to increase redox stability. Studies of the use of ALD to modify analogous supported metal powder catalysts were also added to the scope of the project in response to our industrial partner, Atrex going out of business. The initial portion of the program focused on designing and building the ALD reactor required for deposition of the oxide modifier films. Studies of the oxide modifier films on the coking tolerance and of redox properties of Ni-cermet anodes were then carried out. These studies demonstrated that while surface oxide modifiers were able to impart some coking resistance this only occurred for a relatively small range of operating conditions (e.g., temperature, steam-to-fuel ratio, etc.) and not at the level that would be required for operating in methane fuel at low steam-to-methane ratios. In light of this observation, we focused on assessing another approach to enhance anode coking resistance which eliminated bulk Ni from the anode. This approach made use of electronically conducting perovskite films to provide electrical conductivity in the anode, while using small amounts of Ni or other metals, such as Pt, deposited using ALD as the anode oxidation catalyst. This approach proved to be quite promising at both imparting coking resistance and redox stability.

03 NATURAL GAS↗

Redistribution of Erbium and Oxygen Recoil Atoms and the Structure of Silicon Thin Surface Layers Formed by High-Dose Argon Implantation through Er and SiO{sub 2} Surface Films

Using analytical high-resolution electron microscopy, the Si structure and the redistribution of Er and O recoil atoms embedded in thin (~10 nm) surface layers by Ar{sup +} implantation with an energy of 250–290 keV and a dose of 1 × 10{sup 16} cm{sup –2} through Er and SiO{sub 2} films, respectively, and subsequent annealing are studied. It is established that Si recrystallization fails at a distance of ~20 nm from the surface, where the erbium concentration of 5 × 10{sup 19} cm{sup –3} critical for failure is achieved at T = 950°C. It disproves the generally accepted model of Er-atom transfer by the recrystallization front into SiO{sub 2} on the surface. Instead, it is shown that the redistribution of O recoil atoms to the initial oxide during annealing for immobile Er atoms provides the formation of surface-inhomogeneous erbium phases in such a way that the oxygen-enriched Er–Si–O phase turns out to be concentrated in the oxide, while the depleted Er–Si phase remains in Si. It explains the partial loss of implanted Er after removal of the oxide together with the Er–Si–O phase. It was shown that the formation of a high density of microtwins (locally up to 10{sup 13} cm{sup –2}) is associated with the formation of Ar bubbles and clusters, which is atypical for (100)–Si recrystallization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

On the redistribution of charge in La 0.7 Sr 0.3 CrO 3 /La 0.7 Sr 0.3 MnO 3 multilayer thin films

The atomic and electronic structures of La 0.7 Sr 0.3 MnO 3 (LSMO)/La 0.7 Sr 0.3 CrO 3 (LSCO) multilayer thin films are investigated using aberration corrected scanning transmission electron microscopy (STEM) imaging and spectroscopy. Atomic resolution high angle annular dark-field reveals that LSMO layers have an expanded out-of-plane lattice parameter compared to compressed LSCO layers, contrasting with x-ray diffraction measurements. The expansion is found to result from preferential oxygen vacancy formation in LSMO during STEM sample preparation as determined by electron energy-loss spectroscopy. The La/Sr atom column intensity is also found to oscillate by about 4% between the LSMO and LSCO layers, indicative of La/Sr concentration variation. Using energy-dispersive x-ray spectroscopy in combination with image simulations, we confirm the La/Sr inhomogeneity and elucidate the origin of charge redistribution within the multilayer. These results illuminate the sensitivity of the technique to subtle structural, chemical, and electronic features that can arise to compensate charge imbalances in complex oxide heterostructures.

36 MATERIALS SCIENCE↗

Low-temperature atomic layer deposition of TiO{sub 2} thin layers for the processing of memristive devices

Atomic layer deposition (ALD) represents one of the most fundamental techniques capable of satisfying the strict technological requirements imposed by the rapidly evolving electronic components industry. The actual scaling trend is rapidly leading to the fabrication of nanoscaled devices able to overcome limits of the present microelectronic technology, of which the memristor is one of the principal candidates. Since their development in 2008, TiO{sub 2} thin film memristors have been identified as the future technology for resistive random access memories because of their numerous advantages in producing dense, low power-consuming, three-dimensional memory stacks. The typical features of ALD, such as self-limiting and conformal deposition without line-of-sight requirements, are strong assets for fabricating these nanosized devices. This work focuses on the realization of memristors based on low-temperature ALD TiO{sub 2} thin films. In this process, the oxide layer was directly grown on a polymeric photoresist, thus simplifying the fabrication procedure with a direct liftoff patterning instead of a complex dry etching process. The TiO{sub 2} thin films deposited in a temperature range of 120–230 °C were characterized via Raman spectroscopy and x-ray photoelectron spectroscopy, and electrical current–voltage measurements taken in voltage sweep mode were employed to confirm the existence of resistive switching behaviors typical of memristors. These measurements showed that these low-temperature devices exhibit an ON/OFF ratio comparable to that of a high-temperature memristor, thus exhibiting similar performances with respect to memory applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photoluminescence Characterization of ZnO Thin Films Grown by RF- Sputtering

This article presents photoluminescence (PL) characterization of ZnO thin films deposited by radio-frequency magnetron sputtering method on sapphire and n-type Si (100) substrates. PL measurements were carried out at room temperature to investigate the energy band gaps and optical quality of the ZnO thin films. In order to draw a specific picture of surface morphology of ZnO thin films, atomic force microscope images were taken. All the results were compared to the results obtained from the bulk ZnO sample. The results revealed that the energy band gap of ZnO thin films grown on n-type Si (100) is higher than ZnO on sapphire. However, energy band gap of bulk ZnO is higher compared to both ZnO on n-type Si (100) and sapphire (Al{sub 2}O{sub 3}). This is probably due to the crystalline quality because good crystallinity increases the radiation recombination and hence increase the intensity of the NBE emission.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mechanisms of Photodesorption of Br Atoms from CsBr Surfaces

We have studied desorption of Br atoms from thin crystalline CsBr films grown on KBr(100) and LiF(100) induced by ultraviolet laser irradiation at photon energies of 6.4 and 7.9 eV. The mechanisms of Br atom desorption were modeled using Density Functional Theory (DFT) calculations. The experimental data and theoretical calculations demonstrate that the sub-bandgap photoexcitation at 6.4 eV excites predominantly the CsBr surface leading to desorption of neutral Br-atoms with a hyperthermal kinetic energy distribution. Excitation above the bandgap at 7.9 eV leads to desorption of Br atoms with both thermal and hyperthermal energies. The results of the theoretical modeling suggest that desorption of Br atoms with thermal velocities originates from subsurface exciton decay which produces interstitial Br atoms that subsequently diffuse to the CsBr surface. Hyperthermal desorption can be explained by the exciton-based desorption model. The calculated maximum kinetic energy of emitted Br atoms agrees well with the experimental data.

Environmental Molecular Sciences Laboratory↗

Structural and electrical properties of ternary Ru-AlN thin films prepared by plasma-enhanced atomic layer deposition

Highlights: Black-Right-Pointing-Pointer Ru-AlN thin films were grown by plasma-enhanced atomic layer deposition (PEALD). Black-Right-Pointing-Pointer Structural properties were systematically investigated by XRD, BF-STEM and EDX. Black-Right-Pointing-Pointer A drastic decrease in resistivity was due to the microstructural change of the films. -- Abstract: Ruthenium-aluminum-nitride (Ru-AlN) thin films were grown by plasma-enhanced atomic layer deposition (PEALD) at 300 Degree-Sign C. The Ru intermixing ratio of Ru-AlN thin films was controlled by the number of Ru unit cycles, while the number of AlN unit cycles was fixed to one cycle. The electrical resistivity of Ru-AlN thin film decreased with increasing the Ru intermixing ratio, but a drastic decrease in electrical resistivity was observed when the Ru intermixing ratio was around 0.58-0.78. Bright-field scanning transmission electron microscope (BF-STEM) and energy-dispersive X-ray spectroscopy (EDX) element mapping analysis revealed that the electrical resistivity of Ru-AlN thin film was strongly dependent on the microstructures as well as on the Ru intermixing ratio. Although the electrical resistivity of Ru-AlN thin films decreased with increasing the Ru intermixing ratio, a drastic decrease in electrical resistivity occurred where the electrical paths formed as a result of the coalescence of Ru nanocrystals.

36 MATERIALS SCIENCE↗

Triple stack glass-to-glass anodic bonding for optogalvanic spectroscopy cells with electrical feedthroughs

We demonstrate the use of an anodic bonding technique for building a vacuum tight vapor cell for the use of Rydberg spectroscopy of alkali atoms with thin film electrodes on the inside of the cell. The cell is fabricated by simultaneous triple stack glass-to-glass anodic bonding at 300 °C. This glue-free, low temperature sealing technique provides the opportunity to include thin film electric feedthroughs. The pressure broadening is only limited by the vapor pressure of rubidium and the lifetime is at least four months with operating temperatures up to 230 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Faraday Effect in Rubidium Atomic Layers Thinner than 100 nm

The interaction of rubidium atoms with sapphire cell windows at an interwindow distance L = 40–100 nm is studied. For studies, we used the Faraday rotation (FR) effect (rotation of the plane of radiation polarization in a magnetic field) in a thin rubidium atom vapor column for D{sub 1, 2} lines. When L decreases from 100 to 40 nm, a red shift of the FR signal frequency is detected: it increases from 10 to 250 MHz, and the broadening of the low-frequency wing increases to ~1 GHz. The atomic transition F{sub g} = 3 → F{sub e} = 2 for the D{sub 1} line of {sup 85}Rb is shown to be convenient for such investigations, since it can be spectrally separated from other strongly broadened atomic transitions. Coefficients C{sub 3}, which characterize the atom–surface interaction for the D{sub 1} and D{sub 2} lines of Rb, are determined. An additional red frequency shift takes place at a nanocell thickness L < 100 nm when the Rb atom density increases, and this shift is absent at large L. A practical application of an FR signal for measuring strong magnetic fields of several kilogausses is described.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Atomic Layer Co 3 O 4 Nanosheets: The Key to Knittable Zn-Air Batteries

Flexible, wearable, and portable energy storage devices with high-energy density are crucial for next-generation electronics. However, the current battery technologies such as lithium ion batteries have limited theoretical energy density. Additionally, battery materials with small scale and high flexibility which could endure the large surface stress are highly required. In this study, a yarn-based 1D Zn-air battery is designed, which employs atomic layer thin Co 3 O 4 nanosheets as the oxygen reduction reaction/oxygen evolution reaction catalyst. The ultrathin nanosheets are synthesized by a high-yield and facile chemical method and show a thickness of only 1.6 nm, corresponding to few atomic layers. The 1D Zn-air battery shows high cycling stability and high rate capability. The battery is successfully knitted into clothes and it shows high stability during the large deformation and knotting conditions.

25 ENERGY STORAGE↗

Quantitative Determination of Deuterium Atom Concentration in Zinc Oxide Thin Films by Time-of-Flight Secondary Ion Mass Spectrometry

ZnO is a wide-gap semiconductor with very interesting electronic properties.[1,2] Therefore, it has been extensively studied for many years. It has been found that even low centrations of hydrogen in ZnO film can considerably change its electronic behavior.[3-5] Quite a few papers have discussed this issue but it has not been fully understood. Lack of experimental data, especially quantitative data on hydrogen concentration in ZnO samples is an important reason. Dynamic SIMS is the best technique to determine concentration of hydrogen atoms in materials.[6-9] However, it is a very specific technique and the entation is mostly available in semiconductor industry. ToF-SIMS is a more versatile instrument and it is more available in universities and research institutes. Background hydrogen interference has been known to be a serious problem in quantifying hydrogen atoms in solid samples. Although SIMS is an ultra-high vacuum (UHV) technique, there are still some residual gases existing in vacuum chambers during analysis. Most of them are H2, H2O or CH4, which lead to a background that greatly interferes quantitative detection of hydrogen. Therefore, deuterium atoms have been intentionally introduced into the system to avoid this problem. Standard samples are very important for SIMS quantitative analysis. A common method to prepare such kind of standard samples is ion-implanting. Therefore, a set of standard D-ZnO samples were prepared by ion-implanting in our work. In this paper, we report using ToF-SIMS to quantitatively determine the concentration of deuterium atoms in a number of high-quality epitaxial ZnO films, with a set of standard samples as references. We are especially interested in the detection limit of deuterium concentration in ZnO. In addition, hydrogen background interference was also investigated.

08 HYDROGEN↗

Handshake electron transfer from hydrogen Rydberg atoms incident at a series of metallic thin films

Thin metallic films have a 1D quantum well along the surface normal direction, which yields particle-in-a-box style electronic quantum states. However the quantum well is not infinitely deep and the wavefunctions of these states penetrate outside the surface where the electron is bound by its own image-charge attraction. Therefore a series of discrete, vacant states reach out from the thin film into the vacuum increasing the probability of electron transfer from an external atom or molecule to the thin film, especially for the resonant case where the quantum well energy matches that of the atom. We show that “handshake” electron transfer from a highly excited Rydberg atom to these thin-film states is experimentally measurable. Thicker films have a wider 1D box, changing the energetic distribution and image-state contribution to the thin film wavefunctions, resulting in more resonances. Calculations successfully predict the number of resonances and the nature of the thin-film wavefunctions for a given film thickness.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗