Search NASA⌕ Search

SEARCH · Search NASA

Results for “boundary value problem”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

Theoretical study of stress concentrations at circular holes and inclusions in strain hardening materials.

Nonlinear boundary value problems of an infinite elastic-plastic plate with a circular hole subjected to pure tension and pure shear at infinity are solved by a method involving Fourier series and finite difference. On the basis of these solutions, the validity of Neuber's relationship between the stress and strain concentration factors for the plane stress problems is examined and a generalized Stowell formula for the stress concentration factor is proposed for problems in which the applied loading may be pure shear as well as pure tension and, furthermore, other stress states. By the same method of solution, the stress distributions around a rigid circular cylindrical inclusion embedded in an infinite rigid-plastic matrix subjected to uniform transverse pure shear and tension are obtained.

Huang, W. C.↗
NASA NTRS1972

On the probability of cycle-slipping in first-order phase-locked loops.

The first-passage time boundary value problem for first-order phase-locked loops (PLL) is analyzed, and spectral representations are developed for the probability density function (pdf), the distribution function, and the moments of the first time to passage (or cycle-slip). For the sinusoidal PLL, an asymptotic formula, that is surprisingly accurate even at low loop SNR's and large frequency offsets, is obtained for the pdf of the time to cycle-slip, in terms of the mean time to slip.

La Frieda, J. R.↗
NASA NTRS1972

Approximate estimation for systems with quantized data.

Estimation of the state of a nonlinear discrete-time system using quantized data is considered. An exact solution for the maximum likelihood estimate is expressed as the solution of a nonlinear two-point boundary-value problem. Approximate recursive solutions for both the maximum likelihood and the conditional-mean estimates are obtained. The results of Monte-Carlo simulations are presented in which the performance of these two algorithms is compared with that of a Kalman filter in which the quantization error is approximated by white noise.-

Clements, K. A.↗
NASA NTRS1972

Optimization of simple structures with higher mode frequency constraints.

Results of a study of least weight optimization of simple structures with a single natural frequency constraint. Variational techniques were used to derive the necessary equations, and numerical methods were used, where required, to find solutions to the resulting nonlinear, two-point boundary value problems. The numerical results suggest a similarity between the fixed fundamental frequency solution and solutions in which a single frequency other than fundamental is held fixed. Such a similarity is shown to occur under special circumstances, and the knowledge of the fundamental solution in these cases makes it possible to calculate the solution to problems with constraints on frequencies other than the fundamental.

Weisshaar, T. A.↗
NASA NTRS1972

Performance Analysis and Design Synthesis (PADS) computer program. Volume 2: Program description, part 2

The QL module of the Performance Analysis and Design Synthesis (PADS) computer program is described. Execution of this module is initiated when and if subroutine PADSI calls subroutine GROPE. Subroutine GROPE controls the high level logical flow of the QL module. The purpose of the module is to determine a trajectory that satisfies the necessary variational conditions for optimal performance. The module achieves this by solving a nonlinear multi-point boundary value problem. The numerical method employed is described. It is an iterative technique that converges quadratically when it does converge. The three basic steps of the module are: (1) initialization, (2) iteration, and (3) culmination. For Volume 1 see N73-13199.

Source record↗
NASA NTRS1973

Finite deformation of elasto-plastic solids

A theoretical basis is established for analysis of finite deformation of metals. The observation that finite deformation of such elastoplastic materials may be viewed as a process rather than an event leads to derivation of a complete initial and boundary value problem distinguished by its quasilinear nature. This feature of the formulation motivates adoption of an incremental approach to numerical problem solving. Numerical solution capability is established for problems of plane stress and plane strain. The validity of the theory and numerical analysis is demonstrated by consideration of a number of problems of homogeneous finite deformation for which analytic solutions are available. Subsequently the analysis is employed for the investigation of necking in flat metal tensile bars. The results of this investigation provide the first full numerical solutions for tensile necking in plane stress and plane strain. In addition a basis is provided for assessment of the validity of stress-strain relations inferred from tensile test data.

Osias, J. R.↗
NASA NTRS1973

The electromagnetic radiation from simple sources in the presence of a homogeneous dielectric sphere

In this research, the effect of a homogeneous dielectric sphere on the electromagnetic radiation from simple sources is treated as a boundary value problem, and the solution is obtained by the technique of dyadic Green's functions. Exact representations of the electric fields in the various regions due to a source located inside, outside, or on the surface of a dielectric sphere are formulated. Particular attention is given to the effect of sphere size, source location, dielectric constant, and dielectric loss on the radiation patterns and directivity of small spheres (less than 5 wavelengths in diameter) using the Huygens' source excitation. The computed results are found to closely agree with those measured for waveguide-excited plexiglas spheres. Radiation patterns for an extended Huygens' source and for curved electric dipoles located on the sphere's surface are also presented. The resonance phenomenon associated with the dielectric sphere is studied in terms of the modal representation of the radiated fields. It is found that when the sphere is excited at certain frequencies, much of the energy is radiated into the sidelobes. The addition of a moderate amount of dielectric loss, however, quickly attenuates this resonance effect. A computer program which may be used to calculate the directivity and radiation pattern of a Huygens' source located inside or on the surface of a lossy dielectric sphere is listed.

Mason, V. B.↗
NASA NTRS1971

Global trajectory targeting via computer graphics

A technique is described in which the two-point boundary value problem (TPBVP) may be solved with the aid of interactive computer graphics. The particular TPBVP considered is the optimal electric propulsion space trajectory problem. An appropriate two-dimensional projection of the TPBVP mapping, or trajectory, is displayed on the computer's television screen, and a man-in-the-loop varies selected trajectory starting conditions in the fashion of a nonlinear walk until the viewed trajectory endpoint lies near a displayed target. Once global targeting is accomplished in this manner, program internal logic can easily handle local targeting to strongly solve the TPBVP.

Mann, F. I.↗
NASA NTRS1973

Three-dimensional elastic stress and displacement analysis of finite circular geometry solids containing cracks

A seminumerical method is presented for solving a set of coupled partial differential equations subject to mixed and coupled boundary conditions. The use of this method is illustrated by obtaining solutions for two circular geometry and mixed boundary value problems in three-dimensional elasticity. Stress and displacement distributions are calculated in an axisymmetric, circular bar of finite dimensions containing a penny-shaped crack. Approximate results for an annular plate containing internal surface cracks are also presented.

Gyekenyesi, J. P.↗
NASA NTRS1973

Slow growth of cracks in a rate sensitive Tresca solid.

Extension of the classical theory of fracture to viscoelastic and elastic-plastic materials in which the plasticity effects are confined to a narrow band encompassing the crack front. It is suggested that the Griffith-Irwin criterion of fracture, which requires that the energy release rate computed for a given boundary value problem equal the critical threshold, ought to be replaced by a differential equation governing the slow growth of a crack prior to the onset of rapid propagation. A new term which enters the equation of motion in the dissipative media is proportional to the energy lost within the end sections of the crack, and thus it reflects the extent of inelastic behavior of a solid. A concept of 'apparent' surface energy is introduced to account for the geometry-dependent and the rate-dependent phenomena which influence toughness of an inelastic solid. Three hypotheses regarding the condition for fracture in the subcritical range of load are compared.

Wnuk, M. P.↗
NASA NTRS1973

Transient ion neutralization by electrons.

The nonlinear initial-boundary-value problems describing the lateral neutralization of ion beams for the cases that (1) an auxiliary electric field accelerates the electrons into the ion space, and (2) the electrons are injected into the ion space at a prescribed current density are treated. Analytical solutions are derived which give the position and speed of the neutralization front as a function of time, and the temporal development of the electron density, velocity, and electric fields during the neutralization process.

Wilhelm, H. E.↗
NASA NTRS1973

A new technique for calculating reentry base heating

The laminar base flow field of a two-dimensional reentry body has been studied by Telenin's method. The flow domain was divided into strips along the x-axis, and the flow variations were represented by Lagrange interpolation polynomials in the transformed vertical coordinate. The complete Navier-Stokes equations were used in the near wake region, and the boundary layer equations were applied elsewhere. The boundary conditions consisted of the flat plate thermal boundary layer in the forebody region and the near wake profile in the downstream region. The resulting two-point boundary value problem of 33 ordinary differential equations was then solved by the multiple shooting method. The detailed flow field and thermal environment in the base region are presented in the form of temperature contours, Mach number contours, velocity vectors, pressure distributions, and heat transfer coefficients on the base surface. The maximum heating rate was found on the centerline, and the two-dimensional stagnation point flow solution was adquate to estimate the maximum heating rate so long as the local Reynolds number could be obtained.

Meng, J. C. S.↗
NASA NTRS1974

NBODY - a multipurpose trajectory optimization computer program

Documentation of the NBODY trajectory optimization program is presented in the form of a mathematical development plus a user's manual. Optimal multistage-launch ascent trajectories may be determined by variational thrust steering during the upper phase. Optimal low-thrust interplanetary spacecraft trajectories may also be calculated with solar power or constant power, all-propulsion or embedded coast arcs, fixed or optimal thrust angles, and a variety of terminal end conditions. A hybrid iteration scheme solves the boundary-value problem, while either transversality conditions or a univariate search scheme optimize vehicle or trajectory parameters.

Strack, W. C.↗
NASA NTRS1973

A highly stable explicit integration technique for computational continuum mechanics

A user-oriented subroutine package is built around a highly stable explicit integration algorithm for solution of large order systems of ordinary differential equations, as result from discretization of initial-boundary value problems in continuum mechanics. Fast and accurate solutions, for problems in laminar and turbulent, two and three-dimensional viscous flow fields and multi-dimensional transient heat transfer, are presented using this algorithm, as embodied within a general purpose finite element computer program.

Baker, A. J.↗
NASA NTRS1974

Lagrangian formulation of the one-dimensional Vlasov equation

A new formulation of the one-dimensional Vlasov equation is derived which is analogous to the Kalman-transformed cold-plasma equations. The equations are shown to yield nonsecular, nonlinear approximations to a source or boundary-value problem. It is suggested that the formulation may have other applications in nonlinear plasma theory.

Lewak, G. J.↗
NASA NTRS1972

Slow and fast motion of cracks in inelastic solids. Part 1: Slow growth of cracks in a rate sensitive tresca solid. Part 2: Dynamic crack represented by the Dugdale model

An extension is proposed of the classical theory of fracture to viscoelastic and elastic-plastic materials in which the plasticity effects are confined to a narrow band encompassing the crack front. It is suggested that the Griffith-Irwin criterion of fracture, which requires that the energy release rate computed for a given boundary value problem equals the critical threshold, ought to be replaced by a differential equation governing the slow growth of a crack prior to the onset of rapid propagation. A new term which enters the equation of motion in the dissipative media is proportional to the energy lost within the end sections of the crack, and thus reflects the extent of inelastic behavior of a solid. A concept of apparent surface energy is introduced to account for the geometry dependent and the rate dependent phenomena which influence toughness of an inelastic solid. Three hypotheses regarding the condition for fracture in the subcritical range of load are compared. These are: (1) constant fracture energy (Cherepanov), (2) constant opening displacement at instability (Morozov) and (3) final stretch criterion (Wnuk).

Wnuk, M. P.↗
NASA NTRS1975

Application of the comparison principle to analysis of nonlinear systems

A comparison principle based on a Kamke theorem and Lipschitz conditions is presented along with its possible applications and modifications. It is shown that the comparison lemma can be used in the study of such areas as classical stability theory, higher order trajectory derivatives, Liapunov functions, boundary value problems, approximate dynamic systems, linear and nonlinear systems, and bifurcation analysis.

Gunderson, R. W.↗
NASA NTRS1975

On the Navier-Stokes equations with constant total temperature

For various applications in fluid dynamics, it is assumed that the total temperature is constant. Therefore, the energy equation can be replaced by an algebraic relation. The resulting set of equations in the inviscid case is analyzed. It is shown that the system is strictly hyperbolic and well posed for the initial value problems. Boundary conditions are described such that the linearized system is well posed. The Hopscotch method is investigated and numerical results are presented.

Gottlieb, D.↗