Search NASA⌕ Search

SEARCH · Search NASA

Results for “capacitance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Piezoelectric transmitter

A piezoelectric dipole transmitter is provided that includes a piezoelectric element, an insulating support disposed at a midpoint of said piezoelectric element, or along the piezoelectric element, an external capacitance driver, and an external modulation capacitance disposed proximal to a first end of the piezoelectric element, where the driver capacitance is driven by a signal appropriate to excite a length-extensional acoustic mode of the piezoelectric element, where the piezoelectric element resonates at a piezoelectric element resonance frequency to radiate energy as an electric dipole.

Kemp, Mark A.↗
DOE OSTI2022

Integration and Packaging

Vertically integrated (3D) combinations of sensors and electronics provide the ability to fabricate small, fine pitch pixels with very small total capacitance monolithically integrated with complex circuitry. The small capacitance, enabled by the fine pixel pitch and low interconnect capacitance available in 3D hybrid bonding, provides excellent signal/noise with moderate power. This combination enables fabrication of integrated sensors and electronics with both excellent position and time resolution. In this white paper a discussion will be presented on 3D integration advantages, ongoing projects and prospects in high energy physics and beyond.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Gated ring oscillator with constant dynamic power consumption

A pure digital ring oscillator with constant power consumption as oscillation frequency is adjusted. Circuit topology includes a multiplexer implemented in NAND gates and a delay element positioned after a path selection NAND gate of that multiplexer such that delay element transistors may not toggle if the non-delaying signal path is selected. Assuming a delay element oscillation frequency f and a total capacitance C, and also assuming a plurality N of delay gates each characterized by a propagation delay t1 and a capacitance C1 such that C=C1*N, the ring oscillator of the present invention is characterized by a C value that is proportional to N and an f value that is inversely proportional to N. Furthermore, each of the N delay gates as well as the input and output gates of the multiplexer are characterized by a common capacitance-to-propagation delay ratio=C1/t1.

Wu, Jinyuan↗
DOE OSTI2023

Gated ring oscillator with constant dynamic power consumption

A pure digital ring oscillator with constant power consumption as oscillation frequency is adjusted. Circuit topology includes a multiplexer implemented in NAND gates and a delay element positioned after a path selection NAND gate of that multiplexer such that delay element transistors may not toggle if the non-delaying signal path is selected. Assuming a delay element oscillation frequency f and a total capacitance C, and also assuming a plurality N of delay gates each characterized by a propagation delay t1 and a capacitance C1 such that C=C1*N, the ring oscillator of the present invention is characterized by a C value that is proportional to N and an f value that is inversely proportional to N. Furthermore, each of the N delay gates as well as the input and output gates of the multiplexer are characterized by a common capacitance-to-propagation delay ratio=C1/t1.

Wu, Jinyuan↗
DOE OSTI2022

Flow Loop Study of ECT-Based Volume Fraction Monitoring in Oil–Water Two-Phase Flows

Measurement of phase volume fractions in water-containing multiphase flows is necessary for the optimization of a host of industrial flow processes. Many water-containing multiphase flows can be classified as either water-dispersed or water-continuous mixtures. A recently developed approach based on Hanai’s mixture formula and utilizing electrical capacitance tomography (ECT) sensors have shown good potential for obtaining water volume fraction estimates in two-phase water-containing flows with different water salinity levels. However, the proposed approach was investigated via controlled experiments restricted to static configurations while, in practice, multiphase flows can be dynamic and unpredictable. In this work, we perform a flow loop study of the proposed ECT-based method for volume fraction estimation in oil–water two-phase flows. Here, we evaluate the performance of the proposed method in both water-dispersed and water-continuous flow regimes by employing different types of capacitive sensors in cylindrical arrangements and parallel-plate rectangular arrangements.

02 PETROLEUM↗
DOE OSTI2021

Hydraulic architecture explains species moisture dependency but not mortality rates across a tropical rainfall gradient

Aim Intensified droughts are affecting tropical forests across the globe. However, the underlying mechanisms of tree drought response and mortality are poorly understood. Hydraulic traits and especially hydraulic safety margins (HSMs), i.e. the extent to which plants buffer themselves from thresholds of water stress, provide insights into species-specific drought vulnerability. Methods We investigated hydraulic traits during an intense drought triggered by the 2015-2016 El Niño on 27 canopy trees across three tropical forest sites with differing precipitation. We capitalized on the drought event as a time when plant water status might approach or exceed thresholds of water stress. We investigated the degree to which these traits varied across the rainfall gradient, as well as relationships amongst hydraulic traits and species-specific optimal moisture and mortality rates. Results There were no differences among sites for any measured trait. There was strong coordination among traits, with a network analysis revealing two major groups of coordinated traits. In one group there were water potentials, turgor loss point, sapwood capacitance and density, HSMs, and mortality rate. In the second group there was leaf mass per area, leaf dry matter content, hydraulic architecture (leaf area to sapwood area ratio), and species-specific optimal moisture. Conclusion These results demonstrated that while species with greater safety from turgor loss had lower mortality rates, hydraulic architecture was the only trait that explained species’ moisture dependency. Species with a greater leaf area to sapwood area ratio were associated with drier sites and reduced their transpirational demand during the dry season via deciduousness.

Hydraulic Saftey Margins, drought, tropical forest↗
DOE OSTI2019

Heterobarrier Varactors with Nonuniformly Doped Modulation Layers

Optimum shape of the capacitance–voltage (C–V) characteristic is a critical parameter determining the efficiency of frequency multiplication in heterobarrier varactors (HBVs) operating in the millimeter and submillimeter frequency ranges. A numerical model for calculating the C–V characteristics and leakage currents of HBV heterostructures with arbitrary composition and doping profiles has been verified on the basis of published and original experimental data. A specially designed HBV heterostructure with three undoped InAlAs/AlAs/InAlAs barriers surrounded by nonuniformly doped n-InGaAs modulation layers has been grown by molecular beam epitaxy on InP substrate. Prototype HBVs manufactured using the proposed heterostructure demonstrated a nearly cosine shape of the C–V curve at bias voltages up to 2 V, increased overlap capacitance, and low leakage currents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Numerical Methods to Evaluate Hyperelastic Transducers: Hexagonal Distributed Embedded Energy Converters

Hexagonal distributed embedded energy converters, also known as hexDEECs, are centimeter-scale energy transducers that leverage variable capacitance to generate electricity when their hyperelastic structure is dynamically deformed. To better understand, characterize, and optimize hexDEEC designs, a series of numerical methods and techniques were developed to model the hyperelastic mechanics of hexDEECs, electrostatic properties, and electricity generation characteristics. The numerical methods developed for the hyperelastic structural analysis were corroborated by empirical results from another study, and the models and equations for capacitance, electrostatic forces, and electrical potential energy were derived from fundamental electrostatic equations. These methods and techniques were implemented within the STAR-CCM+ multiphysics software Version 2020.3 (15.06.008) environment. Results from this analysis revealed methodologies and techniques necessary to model the energy converters, which will enable future exploration and optimization of more specific designs and corresponding applications.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2019

Energy Storage Data Reporting in Perspective—Guidelines for Interpreting the Performance of Electrochemical Energy Storage Systems

Due to the tremendous importance of electrochemical energy storage, numerous new materials and electrode architectures for batteries and supercapacitors have emerged in recent years. Correctly characterizing these systems requires considerable time, effort, and experience to ensure proper metrics are reported. Many new nanomaterials show electrochemical behavior somewhere in between conventional double-layer capacitor and battery electrode materials, making their characterization a non-straightforward task. It is understandable that some researchers may be misinformed about how to rigorously characterize their materials and devices, which can result in inflation of their reported data. Additionally, this is not uncommon considering the current state of the field nearly requires record breaking performance for publication in high-impact journals. Incorrect characterization and data reporting misleads both the materials and device development communities, and it is the shared responsibility of the community to follow rigorous reporting methodologies to ensure published results are reliable to ensure constructive progress. This tutorial aims to clarify the main causes of inaccurate data reporting and to give examples of how researchers should proceed. The best practices for measuring and reporting metrics such as capacitance, capacity, coulombic and energy efficiencies, electrochemical impedance, and the energy and power densities of capacitive and pseudocapacitive materials are discussed.

25 ENERGY STORAGE↗
DOE OSTI2023

Corn stover‐derived porous carbon for asymmetric supercapacitors

In this investigation, hydrothermal liquefaction‐derived hydrochar from pulverized corn stover (avg. particle size 1.12 mm and ash content 6.75 wt%) is chemically activated with aqueous KOH in the presence of Pluronic F127 surfactant and thermally treated further up to 800°C to generate porous carbon (POC) with higher specific surface area and porosity. POC obtained under different processing conditions is thoroughly characterized by Brunauer‐Emmett‐Teller surface area analyzer, Fourier transform infrared spectroscopy, Raman spectroscopy, scanning electron microscopy, and transmission electron microscopy. Metallic impurity present in POC is characterized by inductively coupled plasma mass spectrometry. Higher specific surface area POC is observed with the use of the surfactant during the activation process. Fully characterized POC is used with (Mn, Ti)‐mixed oxide electrode to fabricate asymmetric supercapacitor (ASC). Specific capacitance of ASC is measured by cyclic voltammetry (CV) technique using Gamry G‐300 potentiostat/galvanostat/ZRA. CV plots are obtained with different voltage scan rates whereas galvanostatic charge‐discharge plots are studied by varying the current density. Renewable corn stover‐derived POC prepared using Pluronic F127/KOH activation method is found to be highly suitable as an electrode material because of higher capacitance and electrochemical stability over 100 charging‐discharging cycles.

25 ENERGY STORAGE↗
DOE OSTI2019

The Effects of Hydrogen Iodide Back Surface Treatment on CdTe Solar Cells

An appropriate electrical back contact in CdTe solar cells is crucial to achieving high power conversion efficiency. In this work, we develop a facile back surface treatment method for CdTe solar cells using hydroiodic acid (HI) and investigate the effects of HI etching on the CdTe surfaces. The electrical properties of the CdTe absorber and interfaces are characterized by current-voltage, capacitance-voltage, admittance spectroscopy, and complex capacitance spectroscopy measurements. Here, the HI-etched devices show slightly higher apparent carrier concentrations than the control devices, suggesting an increased copper doping in the CdTe absorber. The potential barrier height of the back contact is reduced from 0.430 to 0.368 eV after the HI-treatment, accompanied by reduced contact resistance and carrier recombination. Additionally, the HI-treatment eliminates a defect signature at 0.409 eV. All of these HI-treatment effects lead to improved power conversion efficiency of CdTe solar cells through enhancement of the fill factor, the short circuit current, and open circuit voltage in order of significance.

14 SOLAR ENERGY↗
DOE OSTI2018

Complex Electric Modulus Spectroscopy of (MnFe{sub 2}O{sub 4}){sub x}/CuTl-1223 Nanoparticles-Superconductor Composites

Manganese ferrite (MnFe{sub 2}O{sub 4}) nanoparticles and Cu{sub 0.5}Tl{sub 0}.{sub 5}Ba{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10−δ}(CuTl-1223) superconducting phase were synthesized by sol-gel and solid-state reaction methods, respectively. Different contents of MnFe{sub 2}O{sub 4} nanoparticles were added in CuTl-1223 superconducting matrix to get (MnFe{sub 2}O{sub 4}){sub x}/CuTl-1223; x = 0∼2.0 wt% nanoparticles-superconductor composites. Complex electric modulus spectroscopy measurements of (MnFe{sub 2}O{sub 4}){sub x}/CuTl-1223 composites were carried out at different test frequencies from 20 Hz to 10 MHz and at different operating temperatures from 78 to 253 K to analyze and interpret the dynamical aspects of electrical transport phenomena (i.e., such as carrier hopping rate, conductivity, and blocking factor). The complex electric modulus spectra showed the effects of both grains and grain-boundaries on electrical properties. The capacitance of grain-boundaries was found higher than that of grains. The capacitive behavior of grains was increased and that of grain-boundaries was decreased with increasing operating temperature for all these samples. Blocking factor of these composites was increased with increasing contents of MnFe{sub 2}O{sub 4} nanoparticles. Shifting of peaks in imaginary part of modulus spectra towards lower frequency with increasing contents of these nanoparticles showed non-Debye type relaxation phenomenon in the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Performance analysis and comparison of data-driven models for predicting indoor temperature in multi-zone commercial buildings

Building thermal models, which characterize the properties of a building’s envelope and thermal mass, are essential for accurate indoor temperature and cooling/heating demand prediction. Because of their flexibility and ease of use, data-driven models are increasingly used. Here, this study compared and analyzed the performance of gray-box (resistance-capacitance) and black-box (recurrent neural network) models for predicting indoor air temperature in a real multi-zone commercial building. The developed resistance-capacitance model served as a benchmark model for which full sets of temporal data and building information were used as inputs. The recurrent neural network models were trained and tested assuming various available types and amounts of temporal data and known building physical information to investigate the effects of data and information availability. Feature importance analysis was conducted to select the key variables for different prediction targets under different scenarios. This research provides guidance in selecting an appropriate building thermal response modeling method based on the measured data availability, building physical information, and application.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2020

First-Principles Modeling of Sodium Ion and Water Intercalation into Titanium Disulfide Interlayers for Water Desalination

Recent experiments revealed the possibility of using titanium disulfide (TiS 2 ) as the cathode material in capacitive deionization (CDI) devices for water desalination. Although it performed stably up to 70 cycles with a salt removal capacity of 14 mg/g (corresponding to a sodium ion removal capacity of 35.8 mg/g) at high molar concentration (600 mM NaCl), the maximum capacity of TiS 2 as a CDI electrode was much lower (~70 mAh/g) than as a supercapacitor (239 mAh/g). Understanding why the ion capacities of these two configurations of the same material differ will entail elucidating detailed charge/discharge mechanisms at the atomic scale. Here, we present density functional theory simulations of sodium intercalation into TiS 2 interlayers in order to gain such understanding. We systematically investigated TiS 2 stacking patterns and ion intercalation sites, energetics of the intercalated compounds, and phase transformation during sodium intercalation. The calculated structural evolution and capacitance–voltage curve agree quite well with previous measurements. We conclude that the different maximum capacities of TiS 2 measured in aqueous and dry environments originate from weaker interlayer interactions with respect to shear strain after ~33% intercalation of Na + –H 2 O pairs, which is detrimental to the mechanical stability of TiS 2 . In conclusion, this study sheds light on the underlying mechanisms of ion intercalation into layered materials and contributes to understanding requirements for future design and optimization of CDI electrode materials for water desalination.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Achieving high volumetric EDLC carbons via hydrothermal carbonization and cyclic activation

A novel activation method involving hydrothermal carbonization (HTC) and a pressure-induced low temperature oxidation has been demonstrated for cellulose derived HTC char by using hydrogen peroxide as an active di-oxygen source. The optimized porosity versus gravimetric capacitance results from cellulose derived HTC char synthesized at 220 °C. Almost homogeneous and small particle size micro-ellipse/sphere, relatively high surface area and narrow pore size distributions lead to a high bulk density, i.e. 0.73 g cm -3 , of coating type electrodes, which is much denser than those manufactured from steam activated carbons for supercapacitor industry, i.e., 0.52 g cm -3 . The resulting carbon prepared herein achieves a relatively high volumetric capacitance in an organic electrolyte-based supercapacitor reaching a competitive value of industrial system with the features of environment friendly, cost-effective as well as high yield, and less energy consumption.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Anticorrelation of compressibility and resistivity in a microwave-irradiated two-dimensional electron system

Here, we report our direct study of the compressibility on an ultrahigh mobility two-dimensional electron system ( μ e ~ 1 × 10 7 cm 2 /V s) in GaAs/AlGaAs quantum wells under microwave irradiation. The field penetration current results show that the quantum capacitance oscillates with microwave-induced resistance oscillations, yet, the trend is opposite with respect to the compressibility of equilibrium states in previous theoretical explanations. The anomalous phenomena provide a platform for study on the nonequilibrium system under microwaves. Moreover, the quantum capacitance indication for a multiphoton process around j = 1 / 2 is detected under an intensive microwave below 30 GHz.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

A machine learning degradation model for electrochemical capacitors operated at high temperature

Electrochemical capacitors (ECs) have only recently been considered as an alternative power source for telemetry sensors of drilling equipment for geothermal or oil and gas exploration. The lifecycle analysis and modelling of ECs is underrepresented in literature in comparison to other storage devices e.g. Li-ion batteries. This paper investigates the degradation of ECs when cycled outside the manufacturer-specified operating temperature envelope and proposes a machine learning-based approach for modelling the degradation. Experimental results show that end of life, defined as a 30% decrease in capacitance, occurs at 1,000 cycles when the environmental temperature exceeds the maximum operating temperature by 30%. The life-cycle test data is then used as an input to a Gaussian process regression (GPR) algorithm to predict the capacitance fade trend. The GPR is validated on a total of nine commercial cells from two different manufacturers, achieving an average root mean squared percent error of less than 2% and a mean calibration score of 93% when referenced to a 95% confidence interval. The model can be utilized to determine the EC degradation rate at a range of operating temperature values.

42 ENGINEERING↗
DOE OSTI2025

The Implications of Collisions on the Spatial Profile of Electric Potential and the Space-Charge-Limited Current

The space-charge-limited current (SCLC) in a vacuum diode is given by the Child-Langmuir law (CLL), whose electric potential ϕ(x) ∝ (x/D) 4/3 , where x is the spatial coordinate across the gap and D is the gap separation distance. For a collisional diode, SCLC is given by the Mott-Gurney law (MGL) and ϕ(x) ∝ (x/D) 3/2 . Here, we apply a capacitance argument for SCLC and use the transit time from a recent exact solution for collisional SCLC to show that ϕ(x) ∝ (x/D)ξ for a general collisional gap, where 4/3 ≤ ξ ≤ 3/2 . Furthermore, ξ is strictly a function of νT, where ν is the collision frequency and T is the electron transit time. Using this definition of ξ, we estimate the spatial dependence of the electron velocity and use the gap capacitance to derive an analytic equation for collisional SCLC that agrees within ~4.5% of the exact solution that requires solving parametrically through T. This analytic equation for general ξ asymptotically recovers the CLL as ν → 0 and the MGL as ν → ∞. As a result, matching these limits shows that ξ ≈ 1.40 and V ∝ D 2 ν 2 at the transition from a vacuum to a collisional diode for any device condition.

Anodes↗