SEARCH · Search NASA

Results for “cloud computing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

All sources NASA NTRS DOE OSTI

NASA NTRS1953

A Method for Determining Cloud-Droplet Impingement on Swept Wings

The general effect of wing sweep on cloud-droplet trajectories about swept wings of high aspect ratio moving at subsonic speeds is discussed. A method of computing droplet trajectories about yawed cylinders and swept wings is presented, and illustrative droplet trajectories are computed. A method of extending two-dimensional calculations of droplet impingement on nonswept wings to swept wings is presented. It is shown that the extent of impingement of cloud droplets on an airfoil surface, the total rate of collection of water, and the local rate of impingement per unit area of airfoil surface can be found for a swept wing from two-dimensional data for a nonswept wing. The impingement on a swept wing is obtained from impingement data for a nonswept airfoil section which is the same as the section in the normal plane of the swept wing by calculating all dimensionless parameters with respect to flow conditions in the normal plane of the swept wing.

Dorsch, Robert G.↗

NASA NTRS1990

A comparison of ISCCP and FIRE satellite cloud parameters

One of the goals of the First ISCCP Regional Experiment (FIRE) is the quantification of the uncertainties in the cloud parameter products derived by the International Satellite Cloud Climatology Project (ISCCP). This validation effort has many facets including sensitivity analyses and comparisons to similar data or theoretical results with known accuracies. The FIRE provides cloud-truth data at particular points or along particular lines from surface and aircraft measurement systems. Relating these data to the larger, area-averaged ISCCP results requires intermediate steps using higher resolution satellite data analyses. Errors in the cloud products derived with a particular method can be determined by performing analyses of high resolution satellite data over the area surrounding the point or line measurement. This same analysis technique may then be used to derive cloud parameters over a larger area containing similar cloud fields. It is assumed that the uncertainties found for the small scale analyses are the same for the large scale so that the method has been calibrated for the particular cloud type; i.e., its accuracy is known. Differences between the large scale results using the ISCCP technique and the calibrated method can be computed and used to determine if any significant biases or rms errors occur in the ISCCP results. Selected ISCCP results are compared to cloud parameters derived using the hybrid bispectral threshold method over the FIRE IFO and extended observation areas.

Gibson, Gary G.↗

NASA NTRS2000

Tropospheric Ozone Profile Information Derived From "Cloud Slicing"

This study introduces a new approach to obtain ozone vertical profile information given coincident satellite measurements of both cloud-top pressure and above-cloud column ozone. This method is denoted "cloud slicing". In this study information of cloud-top pressure is derived from Geostationary Orbital Earth Satellite (GOES) infrared data, while above-cloud column ozone is obtained from the Earth Probe total ozone mapping spectrometer (TOMS) instrument. Several case examples are presented showing the feasibility of this technique as well as providing new geophysical results. Because the TOMS instrument measures backscattered UV radiation, it does detect ozone lying below dense water vapor clouds. This opaque property of TOMS can be used directly in conjunction with co-located cloud-top pressure data to derive ozone profile information in the troposphere. The cloud slicing method is an extension of the "Convective Cloud Differential" (CCD) method. In the CCD method, tropospheric column ozone (i.e., the total vertical column of ozone lying in the troposphere) is computed by taking total column ozone with low reflectivity (R less than 0.2) and subtracting from this a nearby measurement of above-cloud column ozone amount under conditions of high reflectivity (R greater than 0.9). (High reflectivity away from snow/ice conditions coincides with strong convection and tropopause-level clouds). The key element in determining tropospheric ozone profile information from the cloud slicing method is to have simultaneous and co-located measurements of both above-cloud column ozone and cloud-top pressure.

Ziemke, Jerald R.↗

NASA NTRSDate not supplied

Comparisons of CFD Simulations of Icing Wind Tunnel Clouds with Experiments Conducted at the NASA Propulsions Systems Laboratory

This paper evaluates simulation predictions against experimental test data of icing clouds that were produced during 2018 ice crystal icing physics tests conducted at the NASA Propulsion Systems Laboratory icing wind tunnel. Aero-thermal and cloud parameters are set and known upstream at the tunnel inlet and spray system, but change as the cloud and air thermodynamically interact as the flowing masses reach the tunnel test section. Utilizing the ANSYS Fluent Discrete Phase Model function, 3D computational fluid dynamics (CFD) simulations were performed, capturing the thermodynamic interactions between the test parameters, and providing predictions of the aero thermal and cloud conditions at the tunnel test section. Simulation predictions were compared with test data that were measured at the tunnel exit plane. Evaluations focused on the cloud concentration (total water content), humidity content, and air temperature. CFD simulation predictions showed areas of agreement and disagreement. Simulations showed that cloud concentration profiles at the test section are strongly related to the initial spray nozzle pattern used at the tunnel inlet. Experimental data suggest that greater dispersion of the cloud occurred as the simulated cloud predicted areas of high and low cloud concentration compared to test data profiles. Simulations, however, captured the magnitude and location of the change in humidity content and the change in air temperature due to the presence of the cloud reasonably well, when compared to test data. This result would suggest that while the ANSYS simulation did not fully predict the spreading of the cloud as measured during experiment, it did capture evaporation and the molecular movements of air and vapor relatively well.

CFD↗

NASA NTRSDate not supplied

Comparisons of CFD Simulations of Icing Wind Tunnel Clouds with Experiments Conducted at the NASA Propulsions Systems Laboratory

CFD↗

NASA NTRS2000

The Atmospheric Channels of GLAS: Near Real-Time Global Lidar Remote Sensing of Clouds and Aerosols from Space

The Geoscience Laser Altimeter System (GLAS) will be placed into orbit in 2001 aboard the Ice, Cloud and Land Elevation Satellite (ICESat). From its nearly polar orbit (94 degree inclination), GLAS will provide continuous global measurements of the vertical distribution of clouds and aerosols while simultaneously providing high accuracy topographic profiling of surface features. During the mission, which is slated to last 3 to 5 years, the data collected by GLAS will be in near-real time to produce level 1 and 2 data products at the NASA GLAS Science Computing Facility (SCF) at Goddard Space Flight Center in Greenbelt, Maryland. The atmospheric products include cloud and aerosol layer heights, planetary boundary layer depth, polar stratospheric clouds and thin cloud and aerosol optical depth. These products will be made available to the science community within days of their creation. The processing algorithms must be robust, adaptive, efficient, and clever enough to run autonomously for the widely varying atmospheric conditions that will be encountered. This paper presents an overview of the GLAS atmospheric data products and briefly discusses the design of the processing algorithms.

Palm, Stephen P.↗

NASA NTRS1982

The carbon abundance in the Magellanic Clouds from IUE observations of H II regions

Results are given of observations of the UV spectra of several H II regions in the Magellanic Clouds, with emphasis on obtaining the carbon abundance from the UV lines of C II, C III, and C IV. The observations and results are described, and theoretical model calculations are presented of the H II regions and the relative abundances of H, He, C, N, O, S, Cl, and Ar computed from the UV and visual spectra. In addition, the abundance results for the Magellanic Clouds are compared with the sun, the Orion Nebula, and galactic planetary nebulae. In comparison with solar abundances, carbon is found to be depleted relative to hydrogen in the Magellanic Clouds by an amount larger than that of nitrogen and oxygen in the SMC and by an amount between that of nitrogen and oxygen in the LMC. It is noted that the results are consistent with a scenario that nitrogen and oxygen have greater primary yields in massive stars than carbon, which may be produced predominantly in less massive stars (such that C/N and C/O in galaxies are initially very low and subsequently increase with evolution). Subsequently, the C/N ratio may decrease as secondary production of nitrogen in less massive stars becomes significant.

Dufour, R. J.↗

NASA NTRS1992

Multiple scattering effects on spaceborne lidar

A semianalytic Monte Carlo code originally developed for oceanographic calculations (Poole et al., 1981) has been modified for use in studying multiple scattering of space-based lidar. The approach is very similar to that described by Kunkel and Weinman (1976). The trajectory of each photon is followed from the transmitter through multiple scattering until the photon is either scattered backward out of the atmosphere, scattered forward into the ground and absorbed, or scattered out the sides of the cloud. The probability that the photon will return directly to the detector is computed and summed over all significant scattering events within the field of view of the detector. Multiple scattering of the lidar pulse causes an apparent increase in the transmittance of the medium. Multiple scattering effects for space-based lidar are more significant than for ground-based lidar due to the much larger beam diameter in the atmosphere. These larger diameters are due not only to the greater range between the lidar and the scattering volume, but also the need to maintain relatively large beam divergences to satisfy eye safety restrictions on the laser irradiance at the Earth's surface. The simulations presented here are for a wavelength of 1064 nm and the Deirmendjian C1 phase function, which yields an extinction coefficient of 17.259/km. We have looked at two cases: a space-based lidar at 296 km observing a C1 cloud 293 km from the lidar and, for comparison purposes, a ground-based lidar looking at a C1 cloud with a base height of either 2 km or 5 km. The C1 size distribution roughly approximates that of stratocumulus or altocumulus clouds (aufm Kampe and Weickmann, 1957).

Winker, David M.↗

NASA NTRS1975

Computational study of nonlinear plasma waves. I - Simulation model and monochromatic wave propagation. II - Sideband instability and satellite growth

A hybrid plasma simulation model is described and applied to the study of electrostatic wave propagation in a one-dimensional Maxwellian plasma with periodic boundary conditions. The model employs a cloud-in-cell scheme which can drastically reduce the fluctuations in particle simulation models and greatly ease the computational difficulties of the Vlasov equation approach. A grid in velocity space is introduced and the particles are represented by points in the x-v phase space. The model is tested first in the absence of an applied signal and then in the presence of a small-amplitude perturbation. The method is also used to study propagation of an essentially monochromatic plane wave. Results on amplitude oscillation and nonlinear frequency shift are compared with available theories.

Matsuda, Y.↗

NASA NTRS1992

Maintenance of strong rotational winds in Venus' middle atmosphere by thermal tides

The cloud-level atmosphere of Venus takes little more than four days to complete one rotation, whereas the solid planet below has a 243-day period. Computer simulations of the circulation of the Venus middle atmosphere between 40 and 85 kilometers, as driven by solar radiation absorbed in the clouds, reproduce (1) the observed cloud-level rotation rate, (2) strong vertical shears above and below the cloud tops, and (3) midlatitude jets and strong poleward flow on the day side. Simulated circulations converge to yield nearly the same zonal winds when initialized with both stronger or weaker rotation rates. These results support the hypothesis that the observed cloud-top rotation rate is maintained by statistical balance between fluxes of momentum by thermal tides and momentum advection by mean meridional circulation.

Newman, Matthew↗

NASA NTRS1972

Low-mass protogalaxies and absorption lines in quasi-stellar objects.

The possibility is explored that the many weak unidentified absorption lines in high-redshift QSO spectra are L-alpha lines of hydrogen. The likely existence of a metagalactic flux of ionizing radiation indicates that hydrogen clouds at high redshifts must be thoroughly ionized. Observations of PHL 957 show that the suggested clouds may be low-mass protogalaxies. A simple model for the clouds' collapse and for the flux of ionizing radiation is used to compute the distribution of expected L-alpha lines in the spectrum of a QSO as a function of wavelength and H I column density. The computed distribution is in accord with observations of the two most distant QSOs, PHL 957 and 4C 05.34. Crudities in the theory and stronger tests of its validity are also discussed.

Arons, J.↗

NASA NTRS1972

Lidar probing of the atmosphere: Some quantitative aspects

Lidar uses laser energy in radar fashion to observe atmospheric backscattering as a function of range. Because of the short optical and near-optical wavelengths used, very small particles and even the gaseous molecules cause significant scattering. This can complicate the evaluation of the observations by introducing attenuation along the path as a second unknown into the lidar equation. In many cases, however, the observations may be interpreted directly on a qualitative basis and show the distribution of particulate matter in clear air or enable the dimensions of visible cloud to be measured accurately. In other cases, particularly where additional data are available, quantitative solutions can provide useful information on remote targets such as tenuous smoke clouds or haze layers. Examples of such observations are given, illustrating the computational approach to the evaluation of the volume concentration of natural dust and haze layers in the lower atmosphere and the mass concentration of a smoke plume. In both cases lidar data are related to independently obtained data on the particulate concentrations involved.

Collis, R. T. H.↗

NASA NTRS1973

A theory of microwave apparent temperature over the ocean

In the microwave region combined active (scatterometer) and passive (radiometer) remote sensors over the ocean show promise of providing surface wind speeds and weather information to the oceanographer and meteorologist. This has aroused great interest in the investigation of the scattering of waves from the sea surface. A composite surface scattering theory is investigated. The two-scale scattering theory proposed by Semyonov was specifically extended to compute the emmision and scattering characteristics of ocean surfaces. The effects of clouds and rain on the radiometer and scatterometer observations are also investigated using horizontally stratified model atmospheres with rough sea surfaces underneath. Various cloud and rain models proposed by meteorologist were employed to determine the rise in the microwave temperature when viewing downward through these model atmospheres. For heavy rain-fall rates the effects of scattering on the radiative transfer process are included.

Wu, S. T.↗

NASA NTRS1974

Impact of combustion products from Space Shuttle launches on ambient air quality

The present work describes some multilayer diffusion models and a computer program for these models developed to predict the impact of ground clouds formed during Space Shuttle launches on ambient air quality. The diffusion models are based on the Gaussian plume equation for an instantaneous volume source. Cloud growth is estimated on the basis of measurable meteorological parameters: standard deviation of the wind azimuth angle, standard deviation of wind elevation angle, vertical wind-speed shear, vertical wind-direction shear, and depth of the surface mixing layer. Calculations using these models indicate that Space Shuttle launches under a variety of meteorological regimes at Kennedy Space Center and Vandenberg AFB are unlikely to endanger the exposure standards for HCl; similar results have been obtained for CO and Al2O3. However, the possibility that precipitation scavenging of the ground cloud might result in an acidic rain that could damage vegetation has not been investigated.

Dumbauld, R. K.↗

NASA NTRS1976

Calcium abundance variations in diffuse interstellar clouds

Observations are discussed which show that the Na I/H2 column-density ratio is relatively constant among different clouds where H2 is optically thin, but the Na I/Ca II column-density ratio varies. This implies that the gas-phase abundance of calcium is variable. It is proposed that the wide variation in the gas-phase calcium abundance can be explained by small variations in the calcium content of grains. The observed enhancement of the Ca II/Na I column-density ratio with cloud velocity is attributed to grain destruction in grain-grain collisions within the same cloud. The structure of shock waves propagating through the interstellar gas is computed, and the grain-destruction model is compared with observational data.

Jura, M.↗

NASA NTRS1981

On the measurement of precipitation frequencies by passive microwave radiometery

Over most of the microwave spectrum, raindrops both absorb and scatter radiation producing large changes in brightness temperatures relative to clear or cloudy conditions. Since the structure of rain varies substantially for different rain rates and climatological backgrounds, the raindrop size distribution, the rain layer thickness and the ice clouds above the rain layer are all important inputs to the model computations. The subsequent modeling involves applying the Mie theory to derive the absorption and scattering effects and the radiative transfer calculation is based upon a variational iterative approach which takes account of the multiple scattering effect of the rain layer. Results over both ocean and land backgrounds are demonstrated. It is also demonstrated that by using discrimination tests of the radiometric data, the rain/no rain decision can be made and the rainfall rate can be retrieved from a statistical inversion technique.

Kidder, S. Q.↗

NASA NTRS1984

Statistical analysis and use of the VAS radiance data

Special radiosonde soundings at 75 km spacings and 3 hour intervals provided an opportunity to learn more about mesoscale data and storm-environment interactions. Relatively small areas of intense convection produce major changes in surrounding fields of thermodynamic, kinematic, and energy variables. The Red River Valley tornado outbreak was studied. Satellite imagery and surface data were used to specify cloud information needed in the radiative heating/cooling calculations. A feasibility study for computing boundary layer winds from satellite-derived thermal data was completed. Winds obtained from TIROS-N retrievals compared very favorably with corresponding values from concurrent rawisonde thermal data, and both sets of thermally-derived winds showed good agreements with observed values.

Fuelberg, H. E.↗

NASA NTRS1984

Search for solar signals in GOES imagery and cloud climatology analysis

The digitization and analysis of 16mm GOES IR imagery to identify spatial and temporal variation in clouds is discussed, along with a cloud climatology analysis. Recently added to the Interactive Graphics Package was a Computer Image Analysis System. This system allows many new imaging techniques. One of the possibilities is the analysis of overall light intensity variations in six 10 degree square boxes across the intertropical convergence zone. This technique is discussed, as is a preliminary analysis of unnormalized data.

Markson, R. J.↗