Search NASA⌕ Search

SEARCH · Search NASA

Results for “composite optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Optimized Resins and Sizings for Vinyl Ester/Carbon Fiber Composites

This report will summarize the results of a Technical Collaboration project to develop technology suitable for the fabrication of styrene-free vinyl ester / carbon fiber prepregs. Numerous combinations of resins from Ashland, sizings from Michelman, and fibers from Zoltek have been investigated at Michigan State and at UDRI, and the processing and properties of the best-performing systems are described.

36 MATERIALS SCIENCE↗

ZnFe{sub 2}O{sub 4}/TiO{sub 2} nanocomposite films for photocathodic protection of 304 stainless steel under visible light

Highlights: • Hydrothermal method for synthesizing ZnFe{sub 2}O{sub 4} nanoparticles on TiO{sub 2} NTs. • The photoelectrochemical property of TiO{sub 2} could greatly improve by doping ZnFe{sub 2}O{sub 4}. • The ZnFe{sub 2}O{sub 4}/TiO{sub 2} composite films provide a better photocathodic protection for 304SS. - Abstract: ZnFe{sub 2}O{sub 4} sensitized TiO{sub 2} nanotubes were fabricated via anodic oxidation and hydrothermal method. The ZnFe{sub 2}O{sub 4}/TiO{sub 2} composite films with different concentrations were synthesized to explore the optimal photoelectrochemical property compared with pure TiO{sub 2} nanotubes. The morphology and chemical composition of samples were characterized by scanning electron microscopy, energy-dispersive spectrometry, and X-ray diffraction. The performance of protection for 304 stainless steel was investigated by electrochemical tests, such as open circuit potential and photocurrent density. The results indicate that ZnFe{sub 2}O{sub 4}/TiO{sub 2} composite films showed efficient photocathodic protection effect for 304 stainless steel under visible light, and the optimal specimen composite films shifted the corrosion potential of 304 stainless steel to −780 mV.

36 MATERIALS SCIENCE↗

Machine learning-enabled prediction of chemical durability of A 2 B 2 O 7 pyrochlore and fluorite

Pyrochlore-structure type and its derivative in a general formula A 2 B 2 O 7 (A = rare earth elements and actinides; B = Ti, Sn, Zr, Hf, Pb, Si, etc.) display excellent structural flexibility and rich crystal chemistry as promising nuclear waste form materials capable of immobilizing actinides and fission products. It is essential to understand these materials’ chemical durability and element release of radionuclides in order to evaluate their performance in near-field environment. However, it is a formidable grand technological challenge to experimentally perform durability testing across hundreds of thousands of possibilities resulting from their extreme compositional complexities due to cation substitutions at both A and B-sites. In this work, we demonstrate a machine learning approach to determine the key materials parameters and structural characteristics governing the leaching behaviors from a small set of selected compositions as model systems, enabling a science-based prediction of their chemical durability that can be extended to a wide range of chemical compositions. The combination of four key structural characteristics and materials parameters, including ionic radius size difference , ionic potential difference , electronegativity difference , and lattice parameter , creates features an optimized prediction of the chemical durability. Two machine learning models, linear regression and Kernel ridge regression models, are trained on the randomly-split training dataset derived from the experimentally-determined elemental release rates, and subsequently tested on the testing dataset. The predicted leaching rates from both machine learning models show an excellent agreement with the experimental data, demonstrating the feasibility of rapidly evaluating the material properties of new compositions. These results highlight the immense potential of synergizing informatics through machine learning-based models and well-controlled experiments of selected model systems to accelerate materials design and discovery with optimized compositions and performance of promising materials for effective nuclear waste management.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Study on process and characterization of high-temperature resistance polyimide composite

A novel polyimide composite with upper-use temperature of 420°C was prepared by autoclave process. The thermogravimetic analysis and rheological properties of uncured polyimide resin powders were analyzed. The influences of process parameters and post-treatment process on the properties of composites were also investigated. The morphologies of polyimide composites after shear fracture were observed by scanning electron microscope (SEM). The high-temperature resistance of composite was characterized by dynamic mechanical thermal analyzer (DMTA). Results showed that the imidization reaction mainly occurred in the temperature range of 100°C~220°C, and the largest weight loss rate appearing at 145°C indicated a drastic imidization reaction occurred. The melt viscosity of polyimide resin decreased with increasing the temperature between 220°C ∼305°C, and then increased with the increase of temperature due to the molecular crosslinking reactions. The fiber volume contents and void contents could be effectively controlled by applying the pressure step by step. The fiber volume content was sensitive to the initial pressure (P{sub i}) during the imidization. The second-stage pressure (P{sub 2}) and the temperature for applying the P{sub 2} (T{sub 2}) during the imidization had a great effect on the void content of composite. Good mechanical properties and interfacial adhesion of polyimide composite could obtain by optimized process. The post-treatment process can obviously increase the high-temperature resistance of polyimide composite. The polyimide composite treated at 420°C exhibited good retention of mechanical properties at 420°C and had a glass transition temperature (Tg) of 456°C. The retentions of flexible strength, flexible modulus and short beam shear strength of polyimide composite at 420°C were 65%, 84% and 62% respectively.

36 MATERIALS SCIENCE↗

ACT Payload Shroud Structural Concept Analysis and Optimization

Aerospace structural applications demand a weight efficient design to perform in a cost effective manner. This is particularly true for launch vehicle structures, where weight is the dominant design driver. The design process typically requires many iterations to ensure that a satisfactory minimum weight has been obtained. Although metallic structures can be weight efficient, composite structures can provide additional weight savings due to their lower density and additional design flexibility. This work presents structural analysis and weight optimization of a composite payload shroud for NASA s Ares V heavy lift vehicle. Two concepts, which were previously determined to be efficient for such a structure are evaluated: a hat stiffened/corrugated panel and a fiber reinforced foam sandwich panel. A composite structural optimization code, HyperSizer, is used to optimize the panel geometry, composite material ply orientations, and sandwich core material. HyperSizer enables an efficient evaluation of thousands of potential designs versus multiple strength and stability-based failure criteria across multiple load cases. HyperSizer sizing process uses a global finite element model to obtain element forces, which are statistically processed to arrive at panel-level design-to loads. These loads are then used to analyze each candidate panel design. A near optimum design is selected as the one with the lowest weight that also provides all positive margins of safety. The stiffness of each newly sized panel or beam component is taken into account in the subsequent finite element analysis. Iteration of analysis/optimization is performed to ensure a converged design. Sizing results for the hat stiffened panel concept and the fiber reinforced foam sandwich concept are presented.

Zalewski, Bart B.↗

What Composition of High-Energy Physics Collaborations is Epistemically Optimal?

Computer simulations have recently come to the fore as a crucial tool for studying epistemic dynamics of scientific collectives. One pressing issue in big-ticket, long-term, and crowded particle physics research is the optimal organization of collaborations. This research developed a computation model of collaborations in high-energy physics and performed simulations to investigate the epistemic efficiency of groups and its dependence on the size of such groups and their composition: namely, percentages of pure, partially theoretically competent, and fully theoretically competent experimentalists. The present study reveals that in both small (100-member) and large (3000-member) groups, epistemic payoff as the measure of epistemic efficiency of collaborations is, generally, positively correlated with an increase in both the number of theoretically fully competent and pure (incompetent) experimentalists. Here, we are less certain of such conclusion in the case of the small collaborations. Although the subcommunity of experimentalists who are partially expert is not found to be immediately epistemically beneficial for collaborations, nevertheless they also crucially serve as a transitional community between the theorists and the experimentalists. Predicated on the toy model simulations, I suggest that institutions should provide measures to assist members of the latter subgroup in progressing toward developing a full theoretical expertise.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

SiC or B4C-B/low strategic element content composite

Advancements in materials technologies are needed to provide the aerospace industry with alternate material options in the event of future strategic metal shortages and to optimize performance of engines. Composite materials are promising candidates for such an application. The potential of SiC and B4C-B filament reinforced low strategic element iron-base alloy content composites or use at 760 to 870 C is considered. A limiting factor towards developing this material for high temperature use has been the reaction between the filament and matrix material during fabrication and service which degrades filament strength. A low temperature fabrication process to limit filament/matrix reaction is being developed which involves the use of hollow cathode sputtering to coat the filaments with iron-base alloys of various compositions. An investigation is being conducted to determine the interfacial reaction effects of SiC and B4C-B filaments with iron-base alloys to develop an understanding of filament/matrix alloy compatibility for 760 to 870 C service.

Petrasek, D. W.↗

Development of Low Density Titanium Alloys for Structural Applications

In this report the results of a program designed to reduce the density of titanium by adding magnesium are presented. Because these two elements are immiscible under conventional ingot metallurgy techniques, two specialized powder metallurgy methods namely, mechanical alloying (MA) and physical vapor deposition (PVD) were implemented. The mechanical alloying experiments were done both at the University of Idaho and at the Defense Research Agency in UK. Since titanium is reactive with interstitial elements, a secondary goal of this research was to correlate solubility extensions with interstitial contamination content, especially oxygen and nitrogen. MA was carried out in SPEX 8000 shaker mils and different milling containers were utilized to control the level of contamination. Results showed that solubilities of Mg in Ti were obtained up to 28 at.% (16.4 wt. %) Mg in Ti for Ti-39.6 at. % (25 wt. %) Mg alloys, which greatly exceed those obtained under equilibrium conditions. This reflects a density reduction of approximately 26 %. Contamination of oxygen and nitrogen seemed to increase the solubility of magnesium in titanium in some cases; however, we were not able to make a clear correlation between contamination levels with solubilities. Work at the DRA has emphasized optimization of present PVD equipment, specifically composition and temperature control. Preliminary PVD data has shown Ti-Mg deposits have successfully been made up to 2 mm thick and that solubility extensions were achieved. The potential for density reduction of titanium by alloying with magnesium has been demonstrated; however, this work has only scratched the surface of the development of such low density alloys. Much research is needed before such alloys could be implemented into industry. Further funding is required in order to optimize the MA/PVD processes including contamination control, determination of optimal alloy compositions, microstructure development, and mechanical property determination.

Froes, F. H.↗

Automated Fiber Placement of PEEK/IM7 Composites with Film Interleaf Layers

The incorporation of thin discrete layers of resin between plies (interleafing) has been shown to improve fatigue and impact properties of structural composite materials. Furthermore, interleafing could be used to increase the barrier properties of composites used as structural materials for cryogenic propellant storage. In this work, robotic heated-head tape placement of PEEK/IM7 composites containing a PEEK polymer film interleaf was investigated. These experiments were carried out at the NASA Langley Research Center automated fiber placement facility. Using the robotic equipment, an optimal fabrication process was developed for the composite without the interleaf. Preliminary interleaf processing trials indicated that a two-stage process was necessary; the film had to be tacked to the partially-placed laminate then fully melted in a separate operation. Screening experiments determined the relative influence of the various robotic process variables on the peel strength of the film-composite interface. Optimization studies were performed in which peel specimens were fabricated at various compaction loads and roller temperatures at each of three film melt processing rates. The resulting data were fitted with quadratic response surfaces. Additional specimens were fabricated at placement parameters predicted by the response surface models to yield high peel strength in an attempt to gage the accuracy of the predicted response and assess the repeatability of the process. The overall results indicate that quality PEEK/lM7 laminates having film interleaves can be successfully and repeatability fabricated by heated head automated fiber placement.

Hulcher, A. Bruce↗

Fabrication of Thermoplastic Composite Laminates Having Film Interleaves By Automated Fiber Placement

Experiments were carried out at the NASA Langley Research Center automated Fiber placement facility to determine an optimal process for the fabrication of composite materials having polymer film interleaves. A series of experiments was conducted to determine an optimal process for the composite prior to investigation of a process to fabricate laminates with polymer films. The results of the composite tests indicated that a well-consolidated, void-free laminate could be attained. Preliminary interleaf processing trials were then conducted to establish some broad guidelines for film processing. The primary finding of these initial studies was that a two-stage process was necessary in order to process these materials adequately. A screening experiment was then performed to determine the relative influence of the process variables on the quality of the film interface as determined by the wedge peel test method. Parameters that were found to be of minor influence on specimen quality were subsequently held at fixed values enabling a more rapid determination of an optimal process. Optimization studies were then performed by varying the remaining parameters at three film melt processing rates. The resulting peel data were fitted with quadratic response surfaces. Additional specimens were fabricated at levels of high peel strength as predicted by the regression models in an attempt to gage the accuracy of the predicted response and to assess the repeatability of the process. The overall results indicate that quality laminates having film interleaves can be successfully and repeatably fabricated by automated fiber placement.

Hulcher, A. B.↗

Optimal experimental designs for the estimation of thermal properties of composite materials

Reliable estimation of thermal properties is extremely important in the utilization of new advanced materials, such as composite materials. The accuracy of these estimates can be increased if the experiments are designed carefully. The objectives of this study are to design optimal experiments to be used in the prediction of these thermal properties and to then utilize these designs in the development of an estimation procedure to determine the effective thermal properties (thermal conductivity and volumetric heat capacity). The experiments were optimized by choosing experimental parameters that maximize the temperature derivatives with respect to all of the unknown thermal properties. This procedure has the effect of minimizing the confidence intervals of the resulting thermal property estimates. Both one-dimensional and two-dimensional experimental designs were optimized. A heat flux boundary condition is required in both analyses for the simultaneous estimation of the thermal properties. For the one-dimensional experiment, the parameters optimized were the heating time of the applied heat flux, the temperature sensor location, and the experimental time. In addition to these parameters, the optimal location of the heat flux was also determined for the two-dimensional experiments. Utilizing the optimal one-dimensional experiment, the effective thermal conductivity perpendicular to the fibers and the effective volumetric heat capacity were then estimated for an IM7-Bismaleimide composite material. The estimation procedure used is based on the minimization of a least squares function which incorporates both calculated and measured temperatures and allows for the parameters to be estimated simultaneously.

Scott, Elaine P.↗

Use of optimum stiffness tailoring to improve the compressive strength of composite plates with holes

A structural optimization procedure is used to tailor the cross-sectional stiffness distribution of compression-loaded composite plates with holes. Minimum mass designs are obtained for plates with cross sections consisting of two different balanced symmetric laminates with 0 deg, + or - 45 deg and 90 deg plies. The plate interior region contains the hole and is designed from a softer material system with a higher failure strain than the plate exterior region. All-graphite-epoxy plates and hybrid graphite/glass-epoxy plates were studied. Other designs with different percentages of 0 deg and + or 45 deg plies in the exterior laminate are compared with the optimum designs. Designs with uniform cross-sectional stiffnesses also are compared with the tailored cross-sectional stiffness designs. Specimens of each design were tested to verify the analytical predictions. The results show that cross-sectional stiffness tailoring can increase the compressive strength and decrease the mass of compression-loaded laminated plates with holes.

Haftka, R. T.↗

Optimal cure cycle design of a resin-fiber composite laminate

Fibers reinforced composites are used in many applications. The composite parts and structures are often manufactured by curing the prepreg or unmolded material. The magnitudes and durations of the cure temperature and the cure pressure applied during the cure process have significant consequences on the performance of the finished product. The goal of this study is to exploit the potential of applying the optimization technique to the cure cycle design. The press molding process of a polyester is used as an example. Various optimization formulations for the cure cycle design are investigated. Recommendations are given for further research in computerizing the cure cycle design.

Hou, Jean W.↗

Synthesis and characterization of imidazolium-mediated Tröger's base containing poly(amide)-ionenes and composites with ionic liquids for CO 2 separation membranes

Considerable attention has been given to polymeric membranes either containing, or built from, ionic liquids (ILs) in gas separation processes due to their selective separation of CO 2 molecules. Achieving high-performance CO 2 separation membranes with enhanced permeability and selectivity relies mainly on rationally designing the molecular substructure and molecular composition of the polymer matrix. In this work, we have exclusively explored a facile synthetic route to incorporate aromatic amide linkages onto an ionene backbone derived from imidazolium-mediated Tröger's base moieties, yielding a novel rigid polyamide-ionene material (“Im-TB-PA ionene”). We have optimized two novel Im-TB-PA ionene polymers via Menshutkin reactions between N,N'-(1,4-phenylene)bis(4-(chloromethyl)benzamide) and equimolar amounts of two isomeric diimidazole-functionalized Tröger's base monomers with ‘ortho’ or ‘para’ regiochemistry. The two resulting Im-TB(o&p)-PA ionenes exhibited high molecular weights and excellent solubilities in polar organic solvents, serving homogeneous and mechanically stable blend membranes with “free” ILs. The structural and physical properties, as well as the gas separation behaviors of both the Im-TB(o&p)-PA ionenes and their IL composite counterparts ([Im-TB(o&p)-PA] + [IL]), were further extensively investigated. The membrane with an optimal composition and polymer architecture ([Im-TB(o)-PA] + [IL]) exhibited outstanding permselectivites for CO 2 /CH 4 (46.73), CO 2 /N 2 (51.74), and CO 2 /H 2 (4.38) gas pairs together with the best CO 2 permeability of 47.2 barrer. Altogether, this study provides a promising strategy to explore the benefits of Im-TB-PA ionenes to separate CO 2 from flue gas, natural gas, and syngas streams, while opening new possibilities in polymer design with strong candidate materials for other practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Advanced membrane electrode assemblies for fuel cells

A method of preparing advanced membrane electrode assemblies (MEA) for use in fuel cells. A base polymer is selected for a base membrane. An electrode composition is selected to optimize properties exhibited by the membrane electrode assembly based on the selection of the base polymer. A property-tuning coating layer composition is selected based on compatibility with the base polymer and the electrode composition. A solvent is selected based on the interaction of the solvent with the base polymer and the property-tuning coating layer composition. The MEA is assembled by preparing the base membrane and then applying the property-tuning coating layer to form a composite membrane. Finally, a catalyst is applied to the composite membrane.

25 ENERGY STORAGE↗

Advanced membrane electrode assemblies for fuel cells

A method of preparing advanced membrane electrode assemblies (MEA) for use in fuel cells. A base polymer is selected for a base membrane. An electrode composition is selected to optimize properties exhibited by the membrane electrode assembly based on the selection of the base polymer. A property-tuning coating layer composition is selected based on compatibility with the base polymer and the electrode composition. A solvent is selected based on the interaction of the solvent with the base polymer and the property-tuning coating layer composition. The MEA is assembled by preparing the base membrane and then applying the property-tuning coating layer to form a composite membrane. Finally, a catalyst is applied to the composite membrane.

36 MATERIALS SCIENCE↗