Search NASA⌕ Search

SEARCH · Search NASA

Results for “computing systems”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Robonaut's Flexible Information Technology Infrastructure

Robonaut, NASA's humanoid robot, is designed to work as both an astronaut assistant and, in certain situations, an astronaut surrogate. This highly dexterous robot performs complex tasks under telepresence control that could previously only be carried out directly by humans. Currently with 47 degrees of freedom (DOF), Robonaut is a state-of-the-art human size telemanipulator system. while many of Robonaut's embedded components have been custom designed to meet packaging or environmental requirements, the primary computing systems used in Robonaut are currently commercial-off-the-shelf (COTS) products which have some correlation to flight qualified computer systems. This loose coupling of information technology (IT) resources allows Robonaut to exploit cost effective solutions while floating the technology base to take advantage of the rapid pace of IT advances. These IT systems utilize a software development environment, which is both compatible with COTS hardware as well as flight proven computing systems, preserving the majority of software development for a flight system. The ability to use highly integrated and flexible COTS software development tools improves productivity while minimizing redesign for a space flight system. Further, the flexibility of Robonaut's software and communication architecture has allowed it to become a widely used distributed development testbed for integrating new capabilities and furthering experimental research.

Askew, Scott↗
NASA NTRS1969

VICAR-DIGITAL image processing system

Computer program corrects various photometic, geometric and frequency response distortions in pictures. The program converts pictures to a number of elements, with each elements optical density quantized to a numerical value. The translated picture is recorded on magnetic tape in digital form for subsequent processing and enhancement by computer.

Billingsley, F.↗
NASA NTRS1977

Air-cushion landing systems

Computer program based on heave/pitch analysis simulates dynamic behavior during landing impact and taxi over irregular runway. Program can be adapted to run on any computer with FORTRAN compiler.

Captain, K. M.↗
NASA NTRS1977

Transient thermal analysis of fluid systems

Computer program performs transient thermal analysis of any 2-node to 200-node-thermal network, which transports heat by fluid flow convection. Program can be modified to add conduction along tubes and radiation.

Chandler, G. D.↗
NASA NTRS1991

Group decision support systems

Computers are used to support collaboration among members of a business team. The specific application is the augmentation of meetings. The motivation, approach, and empirical results are presented.

Petersen, Don↗
NASA NTRS1996

The Integrated Mode Management Interface

Mode management is the processes of understanding the character and consequences of autoflight modes, planning and selecting the engagement, disengagement and transitions between modes, and anticipating automatic mode transitions made by the autoflight system itself. The state of the art is represented by the latest designs produced by each of the major airframe manufacturers, the Boeing 747-400, the Boeing 777, the McDonnell Douglas MD-11, and the Airbus A320/A340 family of airplanes. In these airplanes autoflight modes are selected by manipulating switches on the control panel. The state of the autoflight system is displayed on the flight mode annunciators. The integrated mode management interface (IMMI) is a graphical interface to autoflight mode management systems for aircraft equipped with flight management computer systems (FMCS). The interface consists of a vertical mode manager and a lateral mode manager. Autoflight modes are depicted by icons on a graphical display. Mode selection is accomplished by touching (or mousing) the appropriate icon. The IMMI provides flight crews with an integrated interface to autoflight systems for aircraft equipped with flight management computer systems (FMCS). The current version is modeled on the Boeing glass-cockpit airplanes (747-400, 757/767). It runs on the SGI Indigo workstation. A working prototype of this graphics-based crew interface to the autoflight mode management tasks of glass cockpit airplanes has been installed in the Advanced Concepts Flight Simulator of the CSSRF of NASA Ames Research Center. This IMMI replaces the devices in FMCS equipped airplanes currently known as mode control panel (Boeing), flight guidance control panel (McDonnell Douglas), and flight control unit (Airbus). It also augments the functions of the flight mode annunciators. All glass cockpit airplanes are sufficiently similar that the IMMI could be tailored to the mode management system of any modern cockpit. The IMMI does not replace the functions of the FMCS control and display unit. The purpose of the INMI is to provide flight crews with a shared medium in which they can assess the state of the autoflight system, take control actions on it, reason about its behavior, and communicate with each other about its behavior. The design is intended to increase mode awareness and provide a better interface to autoflight mode management. This report describes the IMMI, the methods that were used in designing and developing it, and the theory underlying the design and development processes.

Hutchins, Edwin↗
NASA NTRS1985

Materials requirements for optical processing and computing devices

Devices for optical processing and computing systems are discussed, with emphasis on the materials requirements imposed by functional constraints. Generalized optical processing and computing systems are described in order to identify principal categories of requisite components for complete system implementation. Three principal device categories are selected for analysis in some detail: spatial light modulators, volume holographic optical elements, and bistable optical devices. The implications for optical processing and computing systems of the materials requirements identified for these device categories are described, and directions for future research are proposed.

Tanguay, A. R., Jr.↗
NASA NTRS1986

Approximate algorithms for partitioning and assignment problems

The problem of optimally assigning the modules of a parallel/pipelined program over the processors of a multiple computer system under certain restrictions on the interconnection structure of the program as well as the multiple computer system was considered. For a variety of such programs it is possible to find linear time if a partition of the program exists in which the load on any processor is within a certain bound. This method, when combined with a binary search over a finite range, provides an approximate solution to the partitioning problem. The specific problems considered were: a chain structured parallel program over a chain-like computer system, multiple chain-like programs over a host-satellite system, and a tree structured parallel program over a host-satellite system. For a problem with m modules and n processors, the complexity of the algorithm is no worse than O(mnlog(W sub T/epsilon)), where W sub T is the cost of assigning all modules to one processor and epsilon the desired accuracy.

Iqbal, M. A.↗
NASA NTRS2016

Data Mining and Knowledge Discover - IBM Cognitive Alternatives for NASA KSC

Skillful tools in cognitive computing to transform industries have been found favorable and profitable for different Directorates at NASA KSC. In this study is shown how cognitive computing systems can be useful for NASA when computers are trained in the same way as humans are to gain knowledge over time. Increasing knowledge through senses, learning and a summation of events is how the applications created by the firm IBM empower the artificial intelligence in a cognitive computing system. NASA has explored and applied for the last decades the artificial intelligence approach specifically with cognitive computing in few projects adopting similar models proposed by IBM Watson. However, the usage of semantic technologies by the dedicated business unit developed by IBM leads these cognitive computing applications to outperform the functionality of the inner tools and present outstanding analysis to facilitate the decision making for managers and leads in a management information system.

Cognitive computing↗
DOE OSTI2020

Constructing a conforming Voronoi mesh for an arbitrarily-shaped enclosed geometric domain

A computing system is described herein, where the computing system includes a processor and memory storing instructions that, when executed by the processor, cause the processor to perform the following acts: 1) receiving a computer-implemented definition of an enclosed geometric domain, wherein the geometric domain is two-dimensional; 2) determining locations of seeds for the enclosed geometric domain; 3) decomposing the enclosed geometric domain into a conforming Voronoi mesh based on the locations of the seeds, wherein the conforming Voronoi mesh comprises Voronoi cells, and further wherein the conforming Voronoi mesh is bounded by the enclosed domain; and 4) performing a numerical simulation to generate simulation results, wherein the numerical simulation is based on at least one Voronoi cell in the Voronoi cells of the conforming Voronoi mesh.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Constructing a conforming voronoi mesh for an arbitrarily-shaped enclosed geometric domain

A computing system is described herein, where the computing system includes a processor and memory storing instructions that, when executed by the processor, cause the processor to perform the following acts: 1) receiving a computer-implemented definition of an enclosed geometric domain, wherein the geometric domain is three-dimensional; 2) determining locations of seeds for the enclosed geometric domain; 3) decomposing the enclosed geometric domain into a conforming Voronoi mesh based on the locations of the seeds, wherein the conforming Voronoi mesh comprises Voronoi cells, and further wherein the conforming Voronoi mesh is bounded by the enclosed domain; and 4) performing a numerical simulation to generate simulation results, wherein the numerical simulation is based on at least one Voronoi cell in the Voronoi cells of the conforming Voronoi mesh.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1986

Portable EDITOR (PEDITOR): A portable image processing system

The PEDITOR image processing system was created to be readily transferable from one type of computer system to another. While nearly identical in function and operation to its predecessor, EDITOR, PEDITOR employs additional techniques which greatly enhance its portability. These cover system structure and processing. In order to confirm the portability of the software system, two different types of computer systems running greatly differing operating systems were used as target machines. A DEC-20 computer running the TOPS-20 operating system and using a Pascal Compiler was utilized for initial code development. The remaining programmers used a Motorola Corporation 68000-based Forward Technology FT-3000 supermicrocomputer running the UNIX-based XENIX operating system and using the Silicon Valley Software Pascal compiler and the XENIX C compiler for their initial code development.

Angelici, G.↗
NASA NTRS1978

Architectures for fault-tolerant spacecraft computers

This paper summarizes the results of a long-term research program in fault-tolerant computing for spacecraft on-board processing. In response to changing device technology this program has progressed from the design of a fault-tolerant uniprocessor to the development of fault-tolerant distributed computer systems. The unusual requirements of spacecraft computing are described along with the resulting real-time computer architectures. The following aspects of these designs are discussed: (1) architectural features to minimize complexity in the distributed computer system, (2) fault-detection and recovery, (3) techniques to enhance reliability and testability, and (4) design approaches for LSI implementation.

Rennels, D. A.↗