Search NASA⌕ Search

SEARCH · Search NASA

Results for “consistent scheme”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Slip velocity boundary conditions for the lattice Boltzmann modeling of microchannel flows

Abstract Slip flows in ducts are important in numerous engineering applications, most notably in microchannel flows. Compared to the standard no‐slip Dirichlet condition, the case of slip formulates as a Robin‐type condition for the fluid tangential velocity. Such an increase in mathematical complexity is accompanied by a more challenging numerical transcription. The present work concerns with this topic, addressing the modeling of the slip velocity boundary condition in the lattice Boltzmann method (LBM) applied to steady slow viscous flows inside ducts of nontrivial shapes. As novelty, we extend the newly revised local second‐order boundary (LSOB) Dirichlet fluid flow method [ Philos. Trans. R. Soc. A 378, 20190404 (2020)] to implement the slip velocity condition within the two‐relaxation‐time (TRT) framework. The LSOB follows an in‐node philosophy where its operation principle seeks to explicitly reconstruct the unknown boundary populations in the form of a third‐order accurate Chapman–Enskog expansion, where the wall slip condition is built‐in as a normal Taylor‐type condition. The key point of this approach is that the required first‐ and second‐order momentum derivatives, rather than computed through nonlocal finite difference approximations, are locally determined through a simple local linear algebra procedure, whose formulation is particularly aided by the TRT symmetry argument. To express the obtained derivatives, two approaches are considered, called and , which operate with node and wall variables, respectively. These two formulations are developed to prescribe the physical slip condition over plane and curved walls, including the corners. Their consistency and accuracy characteristics are examined against alternative linkwise strategies to impose the wall slip velocity, such as the kinetic‐based diffusive bounce‐back scheme, the central linear interpolation slip scheme, and the multireflection slip scheme. The several slip schemes are tested over different 3D microchannel configurations, with walls not conforming with the LBM uniform mesh. Numerical tests confirm the advanced accuracy characteristics of the proposed LSOB slip boundary scheme, revealing the added challenge of the wall slip modeling, and that parabolic accuracy is a necessary requirement to reach second‐order accuracy within this problem class.

Silva, Goncalo↗

A multiscale phase field fracture approach based on the non-affine microsphere model for rubber-like materials

Rubber-like materials have a broad scope of applications due to their unique properties like high stretchability and increased toughness. Hence, computational models for simulating their fracture behavior are paramount for designing them against failures. In this study, the phase field fracture approach is integrated with a multiscale polymer model for predicting the fracture behavior in elastomers. At the microscale, damaged polymer chains are modeled to be made up of a number of elastic chain segments pinned together. Using the phase field approach, the damage in the chains is represented using a continuous variable. Both the bond stretch internal energy and the entropic free energy of the chain are assumed to drive the damage, and the advantages of this assumption are expounded. A framework for utilizing the non-affine microsphere model for damaged systems is proposed here by considering the minimization of a hypothetical undamaged free energy, ultimately connecting the chain stretch to the macroscale deformation gradient. At the macroscale, a thermodynamically consistent formulation is derived in which the total dissipation is assumed to be mainly due to the rupture of molecular bonds. Using a monolithic scheme, the proposed model is numerically implemented and the resulting three-dimensional simulation predictions are compared with existing experimental data. The capability of the model to qualitatively predict the propagation of complex crack paths and quantitatively estimate the overall fracture behavior is verified. Additionally, the effect of the length scale parameter on the predicted fracture behavior is studied for an inhomogeneous system.

97 MATHEMATICS AND COMPUTING↗

An adjoint method for a high-order discretization of deforming domain conservation laws for optimization of flow problems

We report the fully discrete adjoint equations and the corresponding adjoint method are derived for a globally high-order accurate discretization of conservation laws on parametrized, deforming domains. The conservation law on the deforming domain is transformed into one on a fixed reference domain by the introduction of a time-dependent mapping that encapsulates the domain deformation and parametrization, resulting in an Arbitrary Lagrangian–Eulerian form of the governing equations. A high-order discontinuous Galerkin method is used to discretize the transformed equation in space and a high-order diagonally implicit Runge–Kutta scheme is used for the temporal discretization. Quantities of interest that take the form of space–time integrals are discretized in a solver-consistent manner. The corresponding fully discrete adjoint method is used to compute exact gradients of quantities of interest along the manifold of solutions of the fully discrete conservation law. These quantities of interest and their gradients are used in the context of gradient-based PDE-constrained optimization. The adjoint method is used to solve two optimal shape and control problems governed by the isentropic, compressible Navier–Stokes equations. The first optimization problem seeks the energetically optimal trajectory of a 2D airfoil given a required initial and final spatial position. The optimization solver, driven by gradients computed via the adjoint method, reduced the total energy required to complete the specified mission nearly an order of magnitude. The second optimization problem seeks the energetically optimal flapping motion and time-morphed geometry of a 2D airfoil given an equality constraint on the x-directed impulse generated on the airfoil. The optimization solver satisfied the impulse constraint to greater than 8 digits of accuracy and reduced the required energy between a factor of 2 and 10, depending on the value of the impulse constraint, as compared to the nominal configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetization switching of a metallic nanomagnet via current-induced surface spin-polarization of an underlying topological insulator

We consider a thermally stable, metallic nanoscale ferromagnet (FM) subject to spin-polarized current injection and exchange coupling from the spin-helically locked surface states of a topological insulator (TI) to evaluate possible non-volatile memory applications. We consider parallel transport in the TI and the metallic FM, and focus on the efficiency of magnetization switching as a function of transport between the TI and the FM. Transport is modeled as diffusive in the TI beneath the FM, consistent with the mobility in the TI at room temperature, and in the FM, which essentially serves as a constant potential region albeit spin-dependent except in the low conductivity, diffusive limit. Thus, it can be captured by drift-diffusion simulation, which allows for ready interpretation of the results. We calculate switching time and energy consumed per write operation using self-consistent transport, spin-transfer-torque (STT), and magnetization dynamics calculations. Calculated switching energies and times compare favorably to conventional spin-torque memory schemes for substantial interlayer conductivity. Nevertheless, we find that shunting of current from the TI to a metallic nanomagnet can substantially limit efficiency. Exacerbating the problem, STT from the TI effectively increases the TI resistivity. We show that for optimum performance, the sheet resistivity of the FM layer should be comparable to or larger than that of the TI surface layer. Thus, the effective conductivity of the FM layer becomes a critical design consideration for TI-based non-volatile memory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Elimination of QCD Renormalization Scale and Scheme Ambiguities

The setting of the renormalization scale (μ r ) in the perturbative QCD (pQCD) is one of the crucial problems for achieving precise fixed-order pQCD predictions. The conventional prescription is to take its value as the typical momentum transfer Q in a given process, and theoretical uncertainties are then evaluated by varying it over an arbitrary range. The conventional scale-setting procedure introduces arbitrary scheme-and-scale ambiguities in fixed-order pQCD predictions. The principle of maximum conformality (PMC) provides a systematic way to eliminate the renormalization scheme-and-scale ambiguities. The PMC method has rigorous theoretical foundations; it satisfies the renormalization group invariance (RGI) and all of the self-consistency conditions derived from the renormalization group. The PMC has now been successfully applied to many physical processes. In this paper, we summarize recent PMC applications, including event shape observables and heavy quark pair production near the threshold region in e + e – annihilation and top-quark decay at hadronic colliders. In addition, estimating the contributions related to the uncalculated higher-order terms is also summarized. These results show that the major theoretical uncertainties caused by different choices of μ r are eliminated, and the improved pQCD predictions are thus obtained, demonstrating the generality and applicability of the PMC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Consistent SPH Simulations of Protostellar Collapse and Fragmentation

We study the consistency and convergence of smoothed particle hydrodynamics (SPH) as a function of the interpolation parameters, namely the number of particles N, the number of neighbors n, and the smoothing length h, using simulations of the collapse and fragmentation of protostellar rotating cores. The calculations are made using a modified version of the GADGET-2 code that employs an improved scheme for the artificial viscosity and power-law dependences of n and h on N, as was recently proposed by Zhu et al., which comply with the combined limit N→∞, h→0, and n→∞ with n/N→0 for full SPH consistency as the domain resolution is increased. We apply this realization to the “standard isothermal test case” in the variant calculated by Burkert and Bodenheimer and the Gaussian cloud model of Boss to investigate the response of the method to adaptive smoothing lengths in the presence of large density and pressure gradients. The degree of consistency is measured by tracking how well the estimates of the consistency integral relations reproduce their continuous counterparts. In particular, C {sup 0} and C {sup 1} particle consistency is demonstrated, meaning that the calculations are close to second-order accuracy. As long as n is increased with N, mass resolution also improves as the minimum resolvable mass M{sub min}∼n{sup −1}. This aspect allows proper calculation of small-scale structures in the flow associated with the formation and instability of protostellar disks around the growing fragments, which are seen to develop a spiral structure and fragment into close binary/multiple systems as supported by recent observations.

79 ASTRONOMY AND ASTROPHYSICS↗

Recycling and recovery routes of plastic solid waste (PSW): A review

Plastic solid waste (PSW) presents challenges and opportunities to societies regardless of their sustainability awareness and technological advances. In this paper, recent progress in the recycling and recovery of PSW is reviewed. A special emphasis is paid on waste generated from polyolefinic sources, which makes up a great percentage of our daily single-life cycle plastic products. The four routes of PSW treatment are detailed and discussed covering primary (re-extrusion), secondary (mechanical), tertiary (chemical) and quaternary (energy recovery) schemes and technologies. Primary recycling, which involves the re-introduction of clean scrap of single polymer to the extrusion cycle in order to produce products of the similar material, is commonly applied in the processing line itself but rarely applied among recyclers, as recycling materials rarely possess the required quality. The various waste products, consisting of either end-of-life or production (scrap) waste, are the feedstock of secondary techniques, thereby generally reduced in size to a more desirable shape and form, such as pellets, flakes or powders, depending on the source, shape and usability. Tertiary treatment schemes have contributed greatly to the recycling status of PSW in recent years. Advanced thermo-chemical treatment methods cover a wide range of technologies and produce either fuels or petrochemical feedstock. Nowadays, non-catalytic thermal cracking (thermolysis) is receiving renewed attention, due to the fact of added value on a crude oil barrel and its very valuable yielded products. But a fact remains that advanced thermo-chemical recycling of PSW (namely polyolefins) still lacks the proper design and kinetic background to target certain desired products and/or chemicals. Energy recovery was found to be an attainable solution to PSW in general and municipal solid waste (MSW) in particular. The amount of energy produced in kilns and reactors applied in this route is sufficiently investigated up to the point of operation, but not in terms of integration with either petrochemical or converting plants. Although primary and secondary recycling schemes are well established and widely applied, it is concluded that many of the PSW tertiary and quaternary treatment schemes appear to be robust and worthy of additional investigation.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Stable Adaptive Inertial Control of a Doubly-Fed Induction Generator

This paper proposes a stable adaptive inertial control scheme of a doubly-fed induction generator. The proposed power reference is defined in two sections: the deceleration period and the acceleration period. The power reference in the deceleration period consists of a constant and the reference for maximum power point tracking (MPPT) operation. The latter contributes to preventing a second frequency dip (SFD) in this period because its reduction rate is large at the early stage of an event but quickly decreases with time. To improve the frequency nadir (FN), the constant value is set to be proportional to the rotor speed prior to an event. The reference ensures that the rotor speed converges to a stable operating region. To accelerate the rotor speed while causing a small SFD, when the rotor speed converges, the power reference is reduced by a small amount and maintained until it meets the MPPT reference. The results show that the scheme causes a small SFD while improving the FN and the rate of change of frequency in any wind conditions, even in a grid that has a high penetration of wind power.

24 POWER TRANSMISSION AND DISTRIBUTION↗

A unified radiative magnetohydrodynamics code for lightning-like discharge simulations

A two-dimensional Eulerian finite difference code is developed for solving the non-ideal magnetohydrodynamic (MHD) equations including the effects of self-consistent magnetic field, thermal conduction, resistivity, gravity, and radiation transfer, which when combined with specified pulse current models and plasma equations of state, can be used as a unified lightning return stroke solver. The differential equations are written in the covariant form in the cylindrical geometry and kept in the conservative form which enables some high-accuracy shock capturing schemes to be equipped in the lightning channel configuration naturally. In this code, the 5-order weighted essentially non-oscillatory scheme combined with Lax-Friedrichs flux splitting method is introduced for computing the convection terms of the MHD equations. The 3-order total variation diminishing Runge-Kutta integral operator is also equipped to keep the time-space accuracy of consistency. The numerical algorithms for non-ideal terms, e.g., artificial viscosity, resistivity, and thermal conduction, are introduced in the code via operator splitting method. This code assumes the radiation is in local thermodynamic equilibrium with plasma components and the flux limited diffusion algorithm with grey opacities is implemented for computing the radiation transfer. The transport coefficients and equation of state in this code are obtained from detailed particle population distribution calculation, which makes the numerical model is self-consistent. This code is systematically validated via the Sedov blast solutions and then used for lightning return stroke simulations with the peak current being 20 kA, 30 kA, and 40 kA, respectively. The results show that this numerical model consistent with observations and previous numerical results. The population distribution evolution and energy conservation problems are also discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Filling in the GAPS: evaluating completeness and coverage of open-access biodiversity databases in the United States

Primary biodiversity data constitute observations of particular species at given points in time and space. Open-access electronic databases provide unprecedented access to these data, but their usefulness in characterizing species distributions and patterns in biodiversity depend on how complete species inventories are at a given survey location and how uniformly distributed survey locations are along dimensions of time, space, and environment. Our aim was to compare completeness and coverage among three open-access databases representing ten taxonomic groups (amphibians, birds, freshwater bivalves, crayfish, freshwater fish, fungi, insects, mammals, plants, and reptiles) in the contiguous United States. We compiled occurrence records from the Global Biodiversity Information Facility (GBIF), the North American Breeding Bird Survey (BBS), and federally administered fish surveys (FFS). In this study, we aggregated occurrence records by 0.1° × 0.1° grid cells and computed three completeness metrics to classify each grid cell as well-surveyed or not. Next, we compared frequency distributions of surveyed grid cells to background environmental conditions in a GIS and performed Kolmogorov–Smirnov tests to quantify coverage through time, along two spatial gradients, and along eight environmental gradients. The three databases contributed >13.6 million reliable occurrence records distributed among >190,000 grid cells. The percent of well-surveyed grid cells was substantially lower for GBIF (5.2%) than for systematic surveys (BBS and FFS; 82.5%). Still, the large number of GBIF occurrence records produced at least 250 well-surveyed grid cells for six of nine taxonomic groups. Coverages of systematic surveys were less biased across spatial and environmental dimensions but were more biased in temporal coverage compared to GBIF data. GBIF coverages also varied among taxonomic groups, consistent with commonly recognized geographic, environmental, and institutional sampling biases. Lastly, this comprehensive assessment of biodiversity data across the contiguous United States provides a prioritization scheme to fill in the gaps by contributing existing occurrence records to the public domain and planning future surveys.

59 BASIC BIOLOGICAL SCIENCES↗

Quantum decay in renormalizable field theories: Quasiparticle formation, Zeno and anti-Zeno effects

In a renormalizable theory the survival probability of an unstable quantum state features divergences as a consequence of the rapid growth of the density of states with energy. Introducing a high energy cutoff Λ, the transient dynamics during a time scale ≃1∕Λ describes the renormalization of the bare into a “quasiparticle” state which decays on longer time scales. During this early transient the decay law features Zeno behavior e{sup −(t∕t{sub Z}){sup 2}} with the Zeno time-scale t{sub Z}∝1∕Λ{sup 3∕2}. We introduce a dynamical renormalization framework that allows to separate consistently the dynamics of formation of the quasiparticle state and its decay on longer time scales by introducing a renormalization time scale along with alternative “schemes”. The survival probability obeys a renormalization group equation with respect to this scale. We find a transient suppression of the decay law for large Lorentz factor as a consequence of the narrowing of the phase space for decay different from the usual time dilation. In the presence of higher mass thresholds, the energy uncertainty associated with transient dynamics leads to an anti Zeno enhancement with a transient acceleration of the decay into heavier particles. There remains memory of the transient effects in the survival probability even at long time. We discuss possible consequences of these effects in cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Entropic Origin of Pseudogap Physics and a Mott-Slater Transition in Cuprates

Here, we propose a new approach to understand the origin of the pseudogap in the cuprates, in terms of bosonic entropy. The near-simultaneous softening of a large number of different q-bosons yields an extended range of short-range order, wherein the growth of magnetic correlations with decreasing temperature T is anomalously slow. These entropic effects cause the spectral weight associated with the Van Hove singularity (VHS) to shift rapidly and nearly linearly toward half filling at higher T, consistent with a picture of the VHS driving the pseudogap transition at a temperature ~T*. As a byproduct, we develop an order-parameter classification scheme that predicts supertransitions between families of order parameters. As one example, we find that by tuning the hopping parameters, it is possible to drive the cuprates across a transition between Mott and Slater physics, where a spin-frustrated state emerges at the crossover.

36 MATERIALS SCIENCE↗

Relativistic coupled-cluster calculations on XeF{sub 6}: Delicate interplay between electron-correlation and basis-set effects

A systematic relativistic coupled-cluster study is reported on the harmonic vibrational frequencies of the O{sub h}, C{sub 3v}, and C{sub 2v} conformers of XeF{sub 6}, with scalar-relativistic effects efficiently treated using the spin-free exact two-component theory in its one-electron variant (SFX2C-1e). Atomic natural orbital type basis sets recontracted for the SFX2C-1e scheme have been shown to provide rapid basis-set convergence for the vibrational frequencies. SFX2C-1e as well as complementary pseudopotential based computations consistently predicts that both O{sub h} and C{sub 3v} structures are local minima on the potential energy surface, while the C{sub 2v} structure is a transition state. Qualitative disagreement between the present results for the O{sub h} structure and those from CCSD(T)-F12b calculations [Peterson et al., J. Phys. Chem. A 116, 9777 (2012)], which yielded a triply degenerate imaginary frequency for the O{sub h} structure, is attributed here to the high sensitivity of the computed harmonic frequencies of the t{sub 1u} bending modes to the basis-set effects of triples contributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sampling the isothermal-isobaric ensemble by Langevin dynamics

We present a new method of conducting fully flexible-cell molecular dynamics simulation in isothermal-isobaric ensemble based on Langevin equations of motion. The stochastic coupling to all particle and cell degrees of freedoms is introduced in a correct way, in the sense that the stationary configurational distribution is proved to be consistent with that of the isothermal-isobaric ensemble. In order to apply the proposed method in computer simulations, a second order symmetric numerical integration scheme is developed by Trotter’s splitting of the single-step propagator. Moreover, a practical guide of choosing working parameters is suggested for user specified thermo- and baro-coupling time scales. The method and software implementation are carefully validated by a numerical example.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Machine learning for molecular dynamics with strongly correlated electrons

We use machine learning to enable large-scale molecular dynamics (MD) of a correlated electron model under the Gutzwiller approximation scheme. This model exhibits a Mott transition as a function of on-site Coulomb repulsion U . The repeated solution of the Gutzwiller self-consistency equations would be prohibitively expensive for large-scale MD simulations. We show that machine learning models of the Gutzwiller potential energy can be remarkably accurate. The models, which are trained with N = 33 atoms, enable highly accurate MD simulations at much larger scales ( N ≳10 3 ). Here, we investigate the physics of the smooth Mott crossover in the fluid phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ground-state β -decay spectroscopy of 187 Ta

We report beta-decay spectroscopy of the 187 Ta ground state was performed at the KEK Isotope Separation System. β-delayed γ rays corresponding to the previously reported in-beam transitions were observed. The β-decay half-life of the 187 Ta ground state was determined to be 283(10) s by analyzing a time spectrum of β-γ coincidence events. The β-decay branching ratio and log(ft) values were evaluated for the first time. Based on the newly evaluated log(ft) values of >6.0 and a decay scheme, spin-parity values of I π = 7/2 + originating from the odd-proton orbit π7/2[404] were assigned with high confidence, which is consistent with the systematics of neighboring odd-A nuclides.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗