Search NASA⌕ Search

SEARCH · Search NASA

Results for “effectiveness factor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Some effects of Field Of View (FOV) and target size on lateral tracking at hover

An exploratory flight-simulator experiment examined the gross effects of several factors potentially important to the design of a visual display system for aiding VTOL pilots in the difficult task of landing on a small sea-control ship. Field of view (FOV) and target size were the primary variables examined for a lateral tracking task in a full motion 5 degree-of-freedom hover simulation. The mean absolute value of tracking error was used to measure tracking performance, and cross spectral transfer function analysis was performed to determine the pilot's ability to generate good open-loop transfer function characteristics as a function of the experimental variables. It was found that FOV and target size can have a large effect on the pilot's ability to generate open-loop gain, and on his tracking performance.

Breul, H. T.↗
NASA NTRS1992

Automated Weld Characterization Using the Thermoelectric Method

The effective assessment of the integrity of welds is a complicated NDE problem that continues to be a challenge. To be able to completely characterize a weld, detailed knowledge of its tensile strength, ductility, hardness, microstructure, macrostructure, and chemical composition is needed. NDE techniques which can provide information on any of these features are extremely important. In this paper, we examine a seldom used approach based on the thermoelectric (TE) effect for characterizing welds and their associated heat affected zone (HAZ). The thermoelectric method monitors the thermoelectric power which is sensitive to small changes in the kinetics of the conduction electrons near the Fermi surface that can be caused by changes in the local microstructure. The technique has been applied to metal sorting, quality testing, flaw detection, thickness gauging of layers, and microscopic structural analysis. To demonstrate the effectiveness of the technique for characterizing welds, a series of tungsten-inert-gas welded Inconel-718 samples were scanned with a computer controlled TE probe. The samples were then analyzed using a scanning electron microscope and Rockwell hardness tests to characterize the weld and the associated HAZ. We then correlated the results with the TE measurements to provide quantitative information on the size of the HAZ and the degree of hardness of the material in the weld region. This provides potentially valuable information on the strength and fatigue life of the weld. We begin the paper by providing a brief review of the TE technique and then highlight some of the factors that can effect the measurements. Next, we provide an overview of the experimental procedure and discuss the results. Finally, we summarize our findings and consider areas for future research.

Fulton, J. P.↗
DOE OSTI2026

A North Carolina Retrospective: Major Outage Event Trends & Hurricane Helene using TASTI-GRID

The impacts of Hurricane Helene in September of 2024 showed magnifying effects on the number of major power outages reported both during and after the catastrophic weather event. The affected areas on the western edge of North Carolina, particularly Buncombe County (Asheville), endured a disproportionate number of outage impacts than surrounding counties atop the Piedmont Plateau. In 2024, each of the counties with the highest frequency of major outage events received at least one category of FEMA Disaster Declaration following Hurricane Helene. While the storm’s impacts certainly skewed 2024’s yearly major outage frequencies, we use TASTI-GRID to identify existence resilience challenges in the years prior to 2024 that may have given way to understanding how geography, topography, population density and other factors have compounding effects on existing resilience challenges in Buncombe and Mecklenburg counties, specifically.

24 POWER TRANSMISSION AND DISTRIBUTION↗
DOE OSTI2018

The effect of temperature, storage time and collection method on biomethane potential of source separated household food waste

Highlights: • Experiments to mimic storage of OFMSW performed in laboratory scale at 6 and 22 °C. • A recipe representative for OFMSW from households in Sweden was designed. • Clear signs of degradation for OFMSW stored at 22 °C with respect to time. • Higher loss of VS and H{sub 2}O for OFMSW in paper bags compared to plastic bags at 22 °C. - Abstract: The aim of this study was to mimic real conditions for storage and transport and to evaluate how much of the biomethane potential is lost before the organic fraction of municipal solid waste (OFMSW) from households in Sweden reaches the biogas plant. The laboratory biomethane potential (BMP) experiments was carried out with respect to the storage time, collection method (paper or plastic bag) and storage temperature (22 °C and 6 °C) in order to evaluate the effect of these factors on the biomethane potential. A recipe representative for OFMSW from households in Sweden was designed with the help of literature and modification of recipes from technical reports and scientific literature. Laboratory experiments showed that the difference in the BMP of OFMSW stored in plastic- compared to paper bags were obvious at 22 °C with a lower biomethane potential for paper bags, but there was no difference at 6 °C. Provided that the loss of organic matter during pre-treatment is equivalent for both paper and plastic bags it is possible to get more biomethane from OFMSW collected in plastic bags during the warmest part of the year, since they have a more preservative effect on OFMSW than paper bags. This could be explained by the plastic bags being denser than paper and therefore maintain the volatile organic compounds inside the bag and promote a pre-hydrolysis of the material rather than aerobic degradation.

09 BIOMASS FUELS↗
DOE OSTI2022

Clean quantum point contacts in an InAs quantum well grown on a lattice-mismatched InP substrate

Strong spin-orbit coupling, the resulting large g factor, and small effective mass make InAs an attractive material platform for inducing topological superconductivity. The surface Fermi level pinning in the conduction band enables highly transparent ohmic contact without excessive doping. In this study, we investigate electrostatically defined quantum point contacts (QPCs) in a deep-well InAs two-dimensional electron gas. Despite the 3.3% lattice mismatch between the InAs quantum well and the InP substrate, we report clean QPCs with up to eight pronounced quantized conductance plateaus at zero magnetic field. Source-drain dc bias spectroscopy reveals a harmonic confinement potential with a nearly 5 meV subband spacing. We find a many-body exchange interaction enhancement for the out-of-plane g factor |$g^{*}_{⊥}$|=27±1 , whereas the in-plane g factor is isotropic |$g^{*}_{x}$|=|$g^{*}_{y}$|=12±2 , close to the bulk value for InAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1996

Evaluating Fatigue in Operational Settings: The NASA Ames Fatigue Countermeasures Program

In response to a 1980 Congressional request, NASA Ames initiated a program to examine fatigue in flight operations. The Program objectives are to examine fatigue, sleep loss, and circadian disruption in flight operations, determine the effects of these factors on flight crew performance, and the development of fatigue countermeasures. The NASA Ames Fatigue Countermeasures Program conducts controlled laboratory experiments, full-mission flight simulations, and field studies. A range of subjective, behavioral, performance, physiological, and environmental measures are used depending on study objectives. The Program has developed substantial expertise in gathering data during actual flight operations and in other work settings. This has required the development of ambulatory and other measures that can be carried throughout the world and used at 41,000 feet in aircraft cockpits. The NASA Ames Fatigue Countermeasures Program has examined fatigue in shorthaul, longhaul, overnight cargo, and helicopter operations. A recent study of planned cockpit rest periods demonstrated the effectiveness of a brief inflight nap to improve pilot performance and alertness. This study involved inflight reaction time/vigilance performance testing and EEG/EOG measures of physiological alertness. The NASA Ames Fatigue Countermeasures Program has applied scientific findings to the development of education and training materials on fatigue countermeasures, input to federal regulatory activities on pilot flight, duty, and rest requirements, and support of National Transportation Safety Board accident investigations. Current activities are examining fatigue in nonaugmented longhaul flights, regional/commuter flight operations, corporate/business aviation, and psychophysiological variables related to performance.

Rosekind, Mark R.↗
NASA NTRS1989

The effects of different rates of ascent on the incidence of altitude decompression sickness

The effect of different rates of ascent on the incidence of altitude decompression sickness (DCS) was analyzed by a retrospective study on 14,123 man-flights involving direct ascent up to 38,000 ft altitude. The data were classified on the basis of altitude attained, denitrogenation at ground level, duration of stay at altitude, rest or exercise while at altitude, frequency of exercise at altitude, and ascent rates. This database was further divided on the basis of ascent rates into different groups from 1000 ft/min up to 53,000 ft/min. The database was analyzed using multiple correlation and regression methods, and the results of the analysis reveal that ascent rates influence the incidence of DCS in combination with the various factors mentioned above. Rate of ascent was not a significant predictor of DCS and showed a low, but significant multiple correlation (R=0.31) with the above factors. Further, the effects of rates below 2500 ft/min are significantly different from that of rates above 2500 ft/min on the incidence of symptoms (P=0.03) and forced descent (P=0.01). At rates above 2500 ft/min and up to 53,000 ft/min, the effects of ascent rates are not significantly different (P greater than 0.05) in the population examined while the effects of rates below 2500 ft/min are not clear.

Kumar, K. V.↗
NASA NTRS1998

Modeling and Analysis of Multidiscipline Research Teams at NASA Langley Research Center: A Systems Thinking Approach

Multidisciplinary analysis and design is inherently a team activity due to the variety of required expertise and knowledge. As a team activity, multidisciplinary research cannot escape the issues that affect all teams. The level of technical diversity required to perform multidisciplinary analysis and design makes the teaming aspects even more important. A study was conducted at the NASA Langley Research Center to develop a model of multidiscipline teams that can be used to help understand their dynamics and identify key factors that influence their effectiveness. The study sought to apply the elements of systems thinking to better understand the factors, both generic and Langley-specific, that influence the effectiveness of multidiscipline teams. The model of multidiscipline research teams developed during this study has been valuable in identifying means to enhance team effectiveness, recognize and avoid problem behaviors, and provide guidance for forming and coordinating multidiscipline teams.

Waszak, Martin R.↗
DOE OSTI2022

Nanopore facilitated monohydrocalcitic amorphous calcium carbonate precipitation

Predicting the precipitation of solids is important in both natural systems and subsurface energy applications. The factors controlling reaction mechanisms, phase selection and conversion between phases are particularly important. In this contribution the precipitation and growth of an amorphous calcium carbonate species from flowing aqueous solution in a nanoporous controlled pore glass is followed in situ with differential X-ray pair distribution function analysis. It is discovered that the local atomic structure of this phase indicates monohydrocalcite-like pair–pair correlations, yet is functionally amorphous because it lacks long-range structure. The unexpected occurrence of synthetic proto-monohydrocalcite amorphous calcium carbonate, precipitated from a solution undersaturated with respect to published solubilities, suggests that nanopore confinement facilitates formation of an amorphous phase at the expense of more favorable crystalline ones. Finally, this result illustrates that confinement and interface effects are physical factors exerting control on mineral nucleation behavior in natural and geological systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Relativistic Hartree–Fock chiral Lagrangians with confinement, nucleon finite size and short-range effects

A relativistic Hartree–Fock Lagrangian including a chiral potential and nucleon polarisation is investigated in hopes of providing a better description of dense nuclear matter. Here, we fully consider the contribution of the exchange Fock term to the energy and the self-energies, and in addition we investigate the nucleon’s compositeness and finite size effects (confinement and form factors) and short range correlations modeled by a Jastrow ansatz. These effects are added step by step, such that their impact on the dense matter properties can be analysed in details. The parameters of the model are adjusted to reproduce fundamental properties related to the QCD theory at low energy, such as the chiral symmetry breaking, nucleon’s quark substructure and Lattice-QCD predictions, as well as two empirical properties at saturation: the binding energy and the density. All other empirical parameters, e.g., symmetry energy and its slope, incompressibility modulus, effective mass, as well as spin–isospin Landau–Midgal parameter are predictions of the models and can be used to evaluate the gain of the different approximation schemes in describing nuclear properties. Bayesian statistics is employed in order to propagate parameter uncertainties into predictions for the nuclear matter properties. We show that the splitting of the effective Landau mass is largely influenced by the value of the ρ T coupling, and we show that the fit to the symmetry energy, which induces an increase of the coupling constant g ρ by about 20–25% compared to the case where it is fixed by the quark model, provides a very good EoS compatible with the present nuclear physics knowledge.

74 ATOMIC AND MOLECULAR PHYSICS↗
NASA NTRS1975

Influence of the atmosphere on remotely sensed data

Factors which influence the effects of the atmosphere on the data of remote sensing are examined. A radiative-transfer model is considered and effects of varied optical thickness of the atmosphere are investigated. Effects of varied surface albedo are discussed along with the effects of the sun angle, the effects of the scan angle, and questions regarding the atmospheric effects on the recognition performance. It is found that a multiplicative factor involving the sun angle alone is not sufficient for the correction of space data.

Turner, R. E.↗
NASA NTRS1990

Relative merits of reactive and forward-look detection for wind-shear encounters during landing approach for various microburst escape strategies

The goal was to quantify the benefits of airborne forward-look windshear detection and to develop and test a candidate set of strategies for recovery from inadvertent microburst encounters during the landing approach, given the utilization of both reactive-only and forward-look windshear detection. Candidate strategies were developed and evaluated using a non-piloted simulation consisting of a simple point-mass performance model of a transport-category airplane flying through an analytical microburst model. The results indicate that the factor which most strongly effects a microburst recovery is the time at which the recovery is initiated. Forward-look alerts given 10 seconds prior to microburst entry permitted recoveries to be made with negligible altitude loss. The results also show that no single microburst scenario can be used to evaluate the relative merits of various recovery strategies. The type of alert used to initiate the recovery (reactive or forward-look) and the altitude of the microburst encounter had an effect on the type of recovery strategy that performed best. These factors may have serious implications for the design and certification of windshear systems.

Hinton, David A.↗
DOE OSTI2021

Scaling plant responses to high temperature from cell to ecosystem

Plant survival and productivity decrease with exposure to less favourable environments. The negative effects of environmental factors such as water-deficit and salinity stress on vegetation are relatively well studied, primarily due to the large losses in crop yield and forest biomass caused by these stresses. Although the impact of combined heat and drought on plants has received considerable interest in recent years due to climate change, there has been less focus on ascertaining the impact of heat stress alone at a range of temporal and spatial scales. The steady increase in global mean temperatures and (more importantly) variability in extreme temperatures is translating into more frequent and extreme heat stress episodes, which in turn reduce plant productivity. Further, projected increases in both day and night temperatures and the predicted impact of these changes on agricultural and forest productivity have drawn attention to the need to better address the direct effects of heat on plants. In particular, there has been tremendous interest in understanding the short- and long-term effects of heat at the cellular and whole-plant levels, including work on crops of agricultural importance and species from less managed ecosystems. Hence, we made a concerted effort in this Special Issue to capture recent progress in our ability to quantify the impact of heat stress, and identify new tools and approaches that have been developed and implemented to capture a wide range of responses in plants. The series of reviews and research articles presented here captures our current understanding of plant physiological and molecular responses to heat stress, as well as covering phenotyping methods, genetic diversity and potential routes through which plants can acclimate and adapt to warming climates.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Coupled social and infrastructure approaches for enhancing solar energy adoption. Final Report

The goal of this project was to work with rural electric cooperatives to facilitate the diffusion of solar energy adoption in households located in the rural and semi-urban areas of Virginia by identifying social and behavioral factors that might be unique to rural regions; and develop a model to calculate the solar adoption propensity score for household based on their demographics, social and behavioral characteristics which would provide an objective metric to cooperatives that can be further used to do targeted marketing of rooftop solar panels. This was achieved through the following tasks: (1) Conducted a survey of the members of Virginia electric cooperatives to identify demographic, social, financial and behavioral attributes of individuals who are likely to adopt rooftop solar panels. (2) Developed a highly detailed, data-driven, agent-based model of the population of Virginia, focusing on the rural regions. (3) Developed diffusion models that use social, behavioral, and demographic factors, and peer effects to study their impact on solar adoption in rural areas. (4) Built a prototype tool based on the diffusion model to help study market segmentation in rural areas and made it available to National Rural Electric Cooperative Association (NRECA). (5) Results and recommendations derived from the model were provided to NRECA to be shared with participating cooperatives. (6) Results were published in peer reviewed journals, conference proceedings and book chapters, and ideas disseminated through presentations and newsletters. There were several important methodological contributions made under this project which are detailed in the published papers, including: (1) Built a decision-adjusted model for predicting adoptors with imbalanced training data; (2) designed seeding strategies to maximize adoption given a fixed budget; (3) built a methodology to compare different agent based models; (4) created models to identify important factors that influence decision to adopt solar panels; and (5) built a methodology for building household profiles of solar generation to study the duck curve phenomenon. The team included members from the University of Virginia (lead), National Rural Electric Cooperative Association (NRECA), Arizona State University, Virginia Tech and Sandia National Laboratory. Note that no individual entity or stakeholder has incentive to promote solar in rural regions. Most of the research and work focuses around urban regions where the potential for growth in solar adoption is higher due to higher population density. This puts rural areas at a disadvantage. By improving the diffusion of solar adoption in rural parts of the country, we can not only provide clean energy to rural areas but also promote job growth and improves energy independence.

14 SOLAR ENERGY↗
NASA NTRS1996

Promoter-dependent and -independent activation of insulin-like growth factor binding protein-5 gene expression by prostaglandin E2 in primary rat osteoblasts

Insulin-like growth factor (IGF) action is mediated by high affinity cell surface IGF receptors and modulated by a family of secreted IGF binding proteins (IGFBPs). IGFBP-5, the most conserved of six IGFBPs characterized to date, uniquely potentiates the anabolic actions of IGF-I for skeletal cells. In osteoblasts, IGFBP-5 production is stimulated by prostaglandin E2 (PGE2), a local factor that mediates certain effects induced by parathyroid hormone, cytokines such as interleukin-1 and transforming growth factor-beta, and mechanical strain. In this study, we show that transcriptional and post-transcriptional events initiated by PGE2 collaborate to enhance IGFBP-5 gene expression in primary fetal rat osteoblast cultures. PGE2 treatment stimulated up to a 7-fold rise in steady-state levels of IGFBP-5 mRNA throughout 32 h of incubation. Analysis of nascent IGFBP-5 mRNA suggested that PGE2 had only a modest stimulatory effect on IGFBP-5 gene transcription, and transient transfection studies with IGFBP-5 promoter-reporter genes confirmed that PGE2 enhanced promoter activity by approximately 2-fold. Similar stimulatory effects were seen with forskolin. A DNA fragment with only 51 base pairs of the 5'-flanking sequence retained hormonal responsiveness, which may be mediated by a binding site for transcription factor AP-2 located at positions -44 to -36 in the proximal IGFBP-5 promoter. Incubation of osteoblasts with the mRNA transcriptional inhibitor 5,6-dichloro-1-beta-D-ribofuranosylbenzimidazole demonstrated that PGE2 enhanced IGFBP-5 mRNA stability by 2-fold, increasing the t1/2 from 9 to 18 h. The effects of PGE2 on steady-state IGFBP-5 transcripts were abrogated by preincubating cells with cycloheximide, indicating that the effects of PGE2 on both gene transcription and mRNA stability required ongoing protein synthesis. Therefore, both promoter-dependent and -independent pathways converge to enhance IGFBP-5 gene expression in response to PGE2 in osteoblasts.

Non-NASA Center↗
DOE OSTI2024

Hydrogen Diffusion in Slit Pores: Role of Temperature, Pressure, Confinement, and Roughness

Diffusion of hydrogen (H 2 ) is important to understand the leakage risk and transport behavior for H 2 geologic storage. We applied molecular dynamics simulations to investigate the influencing factors of H2 diffusion in the slit pores of calcite, hematite, and quartz, owing to their abundance. It is revealed that the H2 self-diffusion coefficient increases with the temperature, regardless of the type of pore minerals. The diffusion of H 2 in the 20 nm slit pores falls into the bulk diffusion regime when the pressure is 10 MPa. The self-diffusion of H 2 decreases with pressure in all three types of slit pores, following a power law model with the exponents ranging from -0.825 to -0.964. Furthermore, the impact of confinement on H 2 diffusion is more pronounced for the slit pores with stronger interactions with H 2 -like calcite. The role of surface roughness in H 2 diffusion depends on the slit aperture. The rough surface enhances H 2 diffusion in the larger slit pores due to the enlarged effective pore space, whereas it weakens H 2 diffusion in the small slit pores due to stronger adsorption. These findings will fill the knowledge gap on the coupling effect of different factors influencing H 2 diffusion.

08 HYDROGEN↗
DOE OSTI2018

Efficient Removal of Fluoride Using Polypyrrole-Modified Biochar Derived from Slow Pyrolysis of Pomelo Peel: Sorption Capacity and Mechanism

In this study, a novel adsorbent was developed by loading polypyrrole (PPy) onto biochar (BC) prepared by slow pyrolysis of pomelo peel. This PPy-grafted BC mainly exhibited anion-exchange behavior, which dramatically increased fluoride adsorption capacity. The effects of various factors (adsorbent dosage, pyrrole concentration, initial solution pH, co-existing anions and temperature) on the fluoride adsorption were investigated. The adsorbent was characterized by scanning electronic microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and automatic titration methods. Results showed that the optimized adsorbent (BP-0.1) performed excellently at pH 2.8–10.0, and possessed positive charge at pH < 8.6. The adsorption isotherm data were fitted well by the Langmuir model and the maximum adsorption capacity was 18.52 mg/g at 25 ± 2 °C. The adsorption kinetics followed the pseudo-second-order model and adsorption equilibrium was achieved at 24 h. Although both HCO{sub 3}{sup −} and CO{sub 3}{sup 2−} had great influence on F{sup −} adsorption, there was no significant impact in the presence of Cl{sup −}, NO{sub 3}{sup −} and SO{sub 4}{sup 2−}. Real groundwater study showed that 2.5 g/L of BP-0.1 could effectively reduce F{sup −} from 10.0 to 1.4 mg/L at pH 5.0. Thermodynamic parameters confirmed the spontaneous and endothermic nature of the adsorption process. Effect of pH, XPS analysis and the change of amount between Cl{sup −} and F{sup −} in the adsorption process revealed that ion exchange and electrostatic attraction were involved in the adsorption process and ion exchange was the main adsorption mechanism.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Targeting transcription factors through an IMiD independent zinc finger domain

Abstract Immunomodulatory imide drugs (IMiDs) degrade specific C2H2 zinc finger degrons in transcription factors, making them effective against certain cancers. SALL4, a cancer driver, contains seven C2H2 zinc fingers in three clusters, including an IMiD degron in zinc finger cluster one (ZFC1). Surprisingly, IMiDs do not inhibit the growth of SALL4-expressing cancer cells. To overcome this limit, we focused on a non-IMiD domain, SALL4 zinc finger cluster four (ZFC4). By combining ZFC4-DNA crystal structure and an in silico docking algorithm, in conjunction with cell viability assays, we screened several chemical libraries against a potentially druggable binding pocket, leading to the discovery of SH6, a compound that selectively targets SALL4-expressing cancer cells. Mechanistic studies revealed that SH6 degrades SALL4 protein through the CUL4A/CRBN pathway, while deletion of ZFC4 abolished this activity. Moreover, SH6 treatment led to a significant 87% tumor growth inhibition of SALL4+ patient-derived xenografts and demonstrated good bioavailability in pharmacokinetic studies. In summary, these studies represent a new approach for IMiD independent drug discovery targeting C2H2 transcription factors such as SALL4 in cancer.

Liu, Bee Hui↗