Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrical double layer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Double-Layer Kagome Metals Pt 3 Tl 2 and Pt 3 In 2

The connectivity and inherent frustration of the kagome lattice can produce interesting electronic structures and behaviors in compounds containing this structural motif. Here we report the properties of Pt 3 X 2 (X = In and Tl) that adopt a double-layer kagome net structure related to that of the topologically nontrivial high-temperature ferromagnet Fe 3 Sn 2 and the density wave hosting compound V 3 Sb 2 . We examined the structural and physical properties of single crystal Pt 3 Tl 2 and polycrystalline Pt 3 In 2 using X-ray and neutron diffraction, magnetic susceptibility, heat capacity, and electrical transport measurements, along with density functional theory calculations of the electronic structure. Our calculations show that Fermi levels lie in pseudogaps in the densities of states with several bands contributing to transport, and this is consistent with our Hall effect, magnetic susceptibility, and heat capacity measurements. Although electronic dispersions, characteristic of simple kagome nets with nearest-neighbor hopping, are not clearly seen, likely due to the extended nature of the Pt 5d states, we do observe moderately large and non-saturating magnetoresistance values and quantum oscillations in the magnetoresistance and magnetization associated with the kagome nets of Pt.

36 MATERIALS SCIENCE↗

Four-Terminal Electrochemistry: A Back-Gate Controls the Electrochemical Potential of a 2D Working Electrode

We demonstrate that ultrathin semiconductor working electrodes integrated into metal–insulator–semiconductor (MIS) stacks are an enabling platform for understanding non-Faradaic semiconductor electrochemistry. Furthermore, 5 nm thick ZnO electrodes were deposited on 30 nm HfO 2 dielectric on a Pd “gate” electrode. Application of a bias V G between the Pd gate and the ZnO electrode causes electrons to accumulate in the ZnO layer as measured by recording the in-plane sheet conductance. By contacting the top surface of the ZnO layer with the electrolyte in a conventional three-electrode electrochemical cell, we show that the gate voltage V G modulates the electrochemical potential V ZnO of the ZnO film with respect to a reference electrode. Electrochemical potential changes ΔV ZnO up to –1 V vs Ag/Ag + are achieved for V G = +7 V. Furthermore, by measuring V ZnO vs V G , we extract the quantum capacitance CQ of the ZnO film as a function of the Fermi-level position, which provides a direct measure of the ZnO electronic density of states (DOS). Finally, we demonstrate that the gated ZnO working electrodes can disentangle the two principal components of electrochemical potential, namely, the Fermi-level shift Δδ and the double-layer charging energy eΔΦ EDL . This disentanglement hinges on a fundamental difference between back-gating and normal electrochemical control, namely, that electrochemical control requires double-layer charging, while back-gate control does not. Collectively, the results show that the backside gate electrode is an effective fourth terminal that enables measurements that are difficult to achieve in conventional three-terminal electrochemical setups.

36 MATERIALS SCIENCE↗

Electric-field-tunable electronic nematic order in twisted double-bilayer graphene

Graphene-based moiré systems have attracted considerable interest in recent years as they display a remarkable variety of correlated phenomena. Besides insulating and superconducting phases in the vicinity of integer fillings of the moiré unit cell, there is growing evidence for electronic nematic order both in twisted bilayer graphene and twisted double-bilayer graphene (tDBG), as signaled by the spontaneous breaking of the threefold rotational symmetry of the moiré superlattices. Here, we combine symmetry-based analysis with a microscopic continuum model to investigate the structure of the nematic phase of tDBG and its experimental manifestations. First, we perform a detailed comparison between the theoretically calculated local density of states and recent scanning tunneling microscopy data (arXiv:2009.11645) to resolve the internal structure of the nematic order parameter in terms of the layer, sublattice, spin, and valley degrees of freedom. We find strong evidence that the dominant contribution to the nematic order parameter comes from states at the moiré scale rather than at the microscopic scale of the individual graphene layers, which demonstrates the key role played by the moiré degrees of freedom and confirms the correlated nature of the nematic phase in tDBG. Secondly, our analysis reveals an unprecedented tunability of the orientation of the nematic director in tDBG by an externally applied electric field, allowing the director to rotate away from high-symmetry crystalline directions. Here, we compute the expected fingerprints of this rotation in both STM and transport experiments, providing feasible ways to probe it. Rooted in the strong sensitivity of the flat bands of tDBG to the displacement field, this effect opens an interesting route to the electrostatic control of electronic nematicity in moiré systems.

36 MATERIALS SCIENCE↗

Electric fields in the plasma sheet and plasma sheet boundary layer

Results obtained by Forbes et al. (1981) on the basis of time delay measurements between ISEE 1 and ISEE 2 imply that the plasma flow and the boundary contracting velocity were nearly the same, whereas the expanding boundary velocity was not accompanied by any significant plasma sheet plasma motion. In the present study, this observation is discussed in conjunction with electric field data. The study is based on electric field data from the spherical double probe experiment on ISEE 1. Electric field data from GEOS 2 are used to some extent to monitor the electric fields near the geostationary orbit during the considered eve nts. Electric field data during CDAW 6 events are discussed, taking into account positions of ISEE 1/ISEE 2 and GEOS 2; March 22, 0600-1300 UT; and March 22, UT; and March 31, 1400-2400 UT.

Pedersen, A.↗

From single to multiple TiO{sub 2} nanotubes layers: Analysis of the parameters which influence the growth

Highly-ordered vertically oriented TiO{sub 2} nanotube arrays (TiO{sub 2} NTs) are widely exploited in many different fields such as catalysis, electronics and biomedicine. TiO{sub 2} NTs can be synthetized by a number of methods; however, the synthesis via anodization in a fluoride-based electrolyte, proposed for the first time in 2001, has been proved to be the procedure which offers the best control over the nanotube dimensions. In literature, four generations of TiO{sub 2} NTs obtained with different types of anodization baths have been reported, each bath giving rise to TiO{sub 2} NTs with specific morphological features. In this work, we performed the growth of third generation TiO{sub 2} NTs by varying different parameters (i.e. voltage, temperature, anodization time, bath composition) and systematically analyzed their influence on NTs morphology. A deep knowledge of the effect of each parameter allowed their suitable combination in order to obtain double and triple NTs layers with different length and aspect ratio. The proposed method can be applied to synthetize multiple layers with predictable and well-defined features.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Light scattering management of dye-sensitized solar cells based on double-layered photoanodes aided by uniform TiO{sub 2} aggregates

Highlights: • A new architecture of double-layered TiO{sub 2} electrodes is presented. • The electrode contains two alternate layers of TiO{sub 2} nanoparticles and aggregates. • The aggregates layers are deposited onto the nanocrystalline layer. • The new design showed improved efficiency compared to conventional cells. - Abstract: This study presents a new double-layered TiO{sub 2} film containing a nanocrystalline under-layer and a uniform, sponge-like light scattering over-layer for dye-sensitized solar cells (DSCs) application. The over-layer is composed of 2-μm-diameter uniform aggregates, containing small nanoparticles with the average grain size of 20 nm. X-ray diffraction reveals that the light scattering layer has a mixture of anatase and rutile phases, whereas the nanocrystalline layer has a pure anatase phase. Ultraviolet–visible (UV–vis) spectra show that the light scattering layer has lower band gap energy than the nanocrystalline under-layer, extending the absorption of TiO{sub 2} into visible region. Diffuse reflectance spectroscopy demonstrates that the double-layered electrode enjoyed better light scattering ability. The double-layered DSC shows the highest power conversion efficiency of 7.69% and incident photon-to-current efficiency of 88% as a result of higher light harvesting and less recombination which is demonstrated by electrochemical impedance spectroscopy.

36 MATERIALS SCIENCE↗

Magnetic transition temperatures follow crystallographic symmetry in Samarium under high-pressures and low-temperatures

Magnetic ordering temperatures in rare earth metal samarium (Sm) have been studied using an ultrasensitive electrical transport measurement technique in a designer diamond anvil cell to high-pressure up to 47 GPa and low-temperature to 10 K. The two magnetic transitions at 106 K and 14 K in the α-Sm phase, attributed to antiferromagnetic ordering on hexagonal and cubic layers respectively, collapse in to one magnetic transition near 10 GPa when Sm assumes a double hexagonal close packed (dhcp) phase. On further increase in pressure above 34 GPa, the magnetic transitions split again as Sm adopts a hexagonal-hP3 structure indicating different magnetic transition temperatures for different crystallographic sites. A model for magnetic ordering for the hexagonal-hP3 phase in samarium has been proposed based on the experimental data. The magnetic transition temperatures closely follow the crystallographic symmetry during α-Sm → dhcp → fcc/dist.fcc → hP3 structure sequence at high-pressures and low-temperatures.

36 MATERIALS SCIENCE↗

The Induced Magnetic Field of the Moon: Conductivity Profiles and Inferred Temperature

Electromagnetic induction in the moon driven by fluctuations of the interplanetary magnetic field is used to determine the lunar bulk electrical conductivity. The present data clearly show the north-south and east-west transfer function difference as well as high frequency rollover. The difference is shown to be compatible over the mid-frequency range with a noise source associated with the compression of the local remanent field by solar wind dynamic pressure fluctuations. Models for two, three, and four layer; current layer, double current layer, and core plus current layer moons are generated by inversion of the data using a theory which incorporates higher order multipoles. Core radii conductivities generally are in the range 1200 to 1300 km and 0.001 to 0.003 mhos/m; and for the conducting shell 1500 to 1700 km with 0.0001 to 0.0007 mhos/m with an outer layer taken as nonconducting. Core temperature based on available olivine data is 700 to 1000 C.

Sonett, C. P.↗

Probing the role of CNTs in Pt nanoparticle/CNT/graphene nanohybrids H 2 sensors

Abstract In the carbon nanotubes film/graphene heterostructure decorated with catalytic Pt nanoparticles using atomic layer deposition (Pt-NPs/CNTs/Gr) H 2 sensors, the CNT film determines the effective sensing area and the signal transport to Gr channel. The former requires a large CNT aspect ratio for a higher sensing area while the latter demands high electric conductivity for efficient charge transport. Considering the CNT’s aspect ratio decreases, while its conductivity increases ( i.e. , bandgap decreases), with the CNT diameter, it is important to understand how quantitatively these effects impact the performance of the Pt-NPs/CNTs/Gr nanohybrids sensors. Motivated by this, this work presents a systematic study of the Pt-NPs/CNTs/Gr H 2 sensor performance with the CNT films made from different constituent CNTs of diameters ranging from 1 nm for single-wall CNTs, to 2 nm for double-wall CNTs, and to 10–30 nm for multi-wall CNTs (MWCNTs). By measuring the morphology and electric conductivity of SWCNT, DWCNT and MWCNT films, this work aims to reveal the quantitative correlation between the sensor performance and relevant CNT properties. Interestingly, the best performance is obtained on Pt-NPs/MWCNTs/Gr H 2 sensors, which can be attributed to the compromise of the effective sensing area and electric conductivity on MWCNT films and illustrates the importance of optimizing sensor design.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Lowering of the firing voltage and reducing of the discharge delay time in alternating current plasma display panels by a discontinuous spin-coated LaB{sub 6} film on the MgO protective layer

A spin coated LaB{sub 6} discontinuous film is covered on MgO protective layer to improve the discharge performance of alternating current plasma display panels. Under the premise of high transmittance of more than 90%, a very small amount of polycrystal LaB{sub 6} powders added in an organic solvent are chosen as the coating solution. The discharge characteristics results show that with 250 torr 5% Xe-Ne pressure, the firing voltage and discharge delay time of the test panel with LaB{sub 6}/MgO double protective layer are decreased by 13.4% and 36.5%, respectively, compared with that of conventional MgO protective layer, likely owing to the low work function of LaB{sub 6.} Furthermore, the aging time of the proposed structure is comparable to that of pure MgO protective layer. Therefore, it will not increase the production costs and is highly suitable to be applied for alternating current plasma display panels with low electrical power consumption.

36 MATERIALS SCIENCE↗

Rectified motion in an asymmetrically structured channel due to induced-charge electrokinetic and thermo-kinetic phenomena

It would be advantageous to move fluid by the gradient of random thermal noises that are omnipresent in the natural world. To achieve this motion, we propose a rectifier that uses a thermal noise along with induced-charge electroosmosis and electrophoresis (ICEO and ICEP) around a metal post cylinder in an asymmetrically structured channel and numerically examine its rectification performance. By the boundary element method combined with the thin double layer approximation, we find that rectified motion occurs in the asymmetrically structured channel due to ICEO and ICEP. Further, by thermodynamical and equivalent circuit methods, we discuss a thermal voltage that drives a rectifier consisting of a fluidic channel of an electrolyte and an impedance as a noise source. Our calculations show that fluid can be moved in the asymmetrically structured channel by the fluctuation of electric fields due to a thermal noise only when there is a temperature difference. In addition, our simple noise argument provides a different perspective for the thermo-kinetic phenomena (around a metal post) which was predicted based on the electrolyte Seebeck effect in our previous paper [H. Sugioka, “Nonlinear thermokinetic phenomena due to the Seebeck effect,” Langmuir 30, 8621 (2014)].

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Accelerating protons to therapeutic energies with ultraintense, ultraclean, and ultrashort laser pulses

Proton acceleration by high-intensity laser pulses from ultrathin foils for hadron therapy is discussed. With the improvement of the laser intensity contrast ratio to 10{sup -11} achieved on the Hercules laser at the University of Michigan, it became possible to attain laser-solid interactions at intensities up to 10{sup 22} W/cm{sup 2} that allows an efficient regime of laser-driven ion acceleration from submicron foils. Particle-in-cell (PIC) computer simulations of proton acceleration in the directed Coulomb explosion regime from ultrathin double-layer (heavy ions/light ions) foils of different thicknesses were performed under the anticipated experimental conditions for the Hercules laser with pulse energies from 3 to 15 J, pulse duration of 30 fs at full width half maximum (FWHM), focused to a spot size of 0.8 {mu}m (FWHM). In this regime heavy ions expand predominantly in the direction of laser pulse propagation enhancing the longitudinal charge separation electric field that accelerates light ions. The dependence of the maximum proton energy on the foil thickness has been found and the laser pulse characteristics have been matched with the thickness of the target to ensure the most efficient acceleration. Moreover, the proton spectrum demonstrates a peaked structure at high energies, which is required for radiation therapy. Two-dimensional PIC simulations show that a 150-500 TW laser pulse is able to accelerate protons up to 100-220 MeV energies.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Formation of v-shaped potentials

The V-shaped potential structures formed by the injection of a non-neutral electron current into a cold background plasma were simulated numerically. The injection disturbs the initial quasi-neutral plasma, leading to the excitation of strong turbulences which heat the plasma. This leads to expulsion of the plasma from the simulation region. Due to ambipolar electric fields the current injection is interrupted and the initial background plasma is extracted from the system. A particle composition with the characteristics of the two plasma reservoirs now represents the plasma in the simulation region. The interaction of the electron beam with this plasma excites turbulences of smaller amplitudes. A nearly constant time averaged potential drop with nonstationary distribution develops across the system. Single and multiple double layers may form for the duration of one ion plasma period.

Thiemann, H.↗

Organo-sulfur molecules enable iron-based battery electrodes to meet the challenges of large-scale electrical energy storage

Rechargeable iron-air and nickel-iron batteries are attractive as sustainable and inexpensive solutions for large-scale electrical energy storage because of the global abundance and eco-friendliness of iron, and the robustness of iron-based batteries to extended cycling. Despite these advantages, the commercial use of iron-based batteries has been limited by their low charging efficiency. This limitation arises from the iron electrodes evolving hydrogen extensively during charging. The total suppression of hydrogen evolution has been a significant challenge. We have found that organo-sulfur compounds with various structural motifs (linear and cyclic thiols, dithiols, thioethers and aromatic thiols) when added in milli-molar concentration to the aqueous alkaline electrolyte, reduce the hydrogen evolution rate by 90%. These organo-sulfur compounds form strongly adsorbed layers on the iron electrode and block the electrochemical process of hydrogen evolution. The charge-transfer resistance and double-layer capacitance of the iron/electrolyte interface confirm that the extent of suppression of hydrogen evolution depends on the degree of surface coverage and the molecular structure of the organo-sulfur compound. An unanticipated electrochemical effect of the adsorption of organo-sulfur molecules is "de-passivation" that allows the iron electrode to be discharged at high current values. The strongly adsorbed organo-sulfur compounds were also found to resist electro-oxidation even at the positive electrode potentials at which oxygen evolution can occur. Through testing on practical rechargeable battery electrodes we have verified the substantial improvements to the efficiency during charging and the increased capability to discharge at high rates. We expect these performance advances to enable the design of efficient, inexpensive and eco-friendly iron-based batteries for large-scale electrical energy storage.

Yang, B↗

Physical origin of enhanced electrical conduction in aluminum-graphene composites

In this study, the electronic and transport properties of aluminum-graphene composite materials were investigated using the ab initio plane wave density functional theory. The interfacial structure is reported for several configurations. In some cases, the face-centered aluminum (111) surface relaxes in a nearly ideal registry with graphene, resulting in a remarkably continuous interface structure. The Kubo–Greenwood formula and space-projected conductivity were employed to study electronic conduction in aluminum single- and double-layer graphene-aluminum composite models. The electronic density of states at the Fermi level is enhanced by the graphene for certain aluminum–graphene interfaces, thus improving electronic conductivity. In double-layer graphene composites, conductivity varies non-monotonically with temperature, showing an increase between 300 and 400 K at short aluminum-graphene distances, unlike the consistent decrease in single-layer composites.

36 MATERIALS SCIENCE↗

Stacked-Gate FET's For Analog Memory Elements

Three-terminal, double-stacked-gate field-effect transistor (FET), developed as analog memory element. Particularly suited for use as synapse with variable connection strength in electronic neural network. Provides programmable, nonvolatile resistive connection, somewhat in manner of porous-gate FET described in "Porous-Floating-Gate Field-Effect Transistor" (NPO-17532). Resembles commercial erasable programmable read-only memory (EPROM) device, except for thickness of layers of silicon dioxide electrically isolating gates. Either p-channel or n-channel device.

Thakoor, Anilkumar P.↗

Establishing charge-transfer excitons in 2D perovskite heterostructures

Charge-transfer excitons (CTEs) immensely enrich property-tuning capabilities of semiconducting materials. However, such concept has been remaining as unexplored topic within halide perovskite structures. Here, we report that CTEs can be effectively formed in heterostructured 2D perovskites prepared by mixing PEA 2 PbI 4 :PEA 2 SnI 4 , functioning as host and guest components. Remarkably, a broad emission can be demonstrated with quick formation of 3 ps but prolonged lifetime of ~0.5 μs. This broad PL presents the hypothesis of CTEs, verified by the exclusion of lattice distortion and doping effects through demonstrating double-layered PEA 2 PbI 4 /PEA 2 SnI 4 heterostructure when shearing-away PEA 2 SnI 4 film onto the surface of PEA 2 PbI 4 film by using hand-finger pressing method. The below-bandgap photocurrent indicates that CTEs are vital states formed at PEA 2 PbI 4 :PEA 2 SnI 4 interfaces in 2D perovskite heterostructures. Electroluminescence shows that CTEs can be directly formed with electrically injected carriers in perovskite LEDs. Clearly, the CTEs presents a new mechanism to advance the multifunctionalities in 2D perovskites.

36 MATERIALS SCIENCE↗