Search NASA⌕ Search

SEARCH · Search NASA

Results for “electrode interface”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Explanation of Dramatic pH-Dependence of Hydrogen Binding on Noble Metal Electrode: Greatly Weakened Water Adsorption at High pH

Hydrogen oxidation reaction (HOR) and hydrogen evolution reaction (HER) are both 2 orders slower in alkaline electrolyte than in acidic electrolyte, but no explanation has been provided. The first step toward understanding this dramatic pH-dependent HOR/HER performance is to explain the pH-dependent hydrogen binding to the electrode, a perplexing behavior observed experimentally. In this work, we carried out Quantum Mechanics Molecular Dynamics (QMMD) with explicit considerations of solvent and applied voltage ( U ) to in situ simulate water/Pt(100) interface in the condition of under-potential adsorption of hydrogen ( H UPD ). We found that as U is made more negative, the electrode tends to repel water, which in turn increases the hydrogen binding. We predicted a 0.13 eV increase in hydrogen binding from pH = 0.2 to pH = 12.8 with a slope of 10 meV/pH, which is close to the experimental observation of 8 to 12 meV/pH. Thus, we conclude that the changes in water adsorption are the major causes of pH-dependent hydrogen binding on a noble metal. Furthermore, the new insight of critical role of surface water in modifying electrochemical reactions provides a guideline in designing HER/HOR catalyst targeting for the alkaline electrolyte.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Theoretical understanding of stability of the oxygen electrode in a proton-conductor based solid oxide electrolysis cell

The oxygen electrode in a proton-conductor based solid oxide cells is often a triple-conducting material that enables the transport and exchange of electrons (e - ), oxygen ions (O 2- ), and protons (H + ), thus expanding active areas to enhance the oxygen electrode activity. In this work, a theoretical model was developed to understand stability of tri-conducting oxygen electrode by studying chemical potentials of neutral species (i.e., μ o 2 , μ H 2 , and μ H 2 O ) as functions of transport properties, operating parameters, and cell geometry. Our theoretical understanding shows that (1): In a conventional oxygen-ion based solid oxide cell, a high μ o 2 (thus high oxygen partial pressure) exists in the oxygen electrode during the electrolysis mode, which may lead to the formation of cracks at the electrode/electrolyte interface. Further, while in a proton-conductor based solid oxide cell, the μ o 2 is reduced significantly, suppressing the crack formation, and resulting in improved performance stability (2). In a typical proton-conductor based solid oxide electrolyzer, the dependence of μ o 2 on the Faradaic efficiency is negligible. Hence, approaches to block the electronic current can improve the electrolysis efficiency while achieving stability (3). The difference of the μ o 2 (thus p o 2 ) between the oxygen electrode and gas phase can be reduced by using higher ionic conducting components and improving electrode kinetics, which lead to further improvement of electrode stability.

08 HYDROGEN↗
NASA NTRS1982

Pocket ECG electrode

A low-noise electrode suited for sensing electrocardiograms when chronically and subcutaneously implanted in a free-ranging subject. The electrode comprises a pocket-shaped electrically conductive member with a single entrance adapted to receive body fluids. The exterior of the member and the entrance region is coated with electrical insulation so that the only electrolyte/electrode interface is within the member remote from artifact-generating tissue. Cloth straps are bonded to the member to permit the electrode to be sutured to tissue and to provide electrical lead flexure relief.

Lund, Gordon F.↗
DOE OSTI2025

Perovskite-driven solar C 2 hydrocarbon synthesis from CO 2

Photoelectrochemistry (PEC) presents a direct pathway to solar fuel synthesis by integrating light absorption and catalysis into compact electrodes. Yet, PEC hydrocarbon production remains elusive due to high catalytic overpotentials and insufficient semiconductor photovoltage. Here we demonstrate ethane and ethylene synthesis by interfacing lead halide perovskite photoabsorbers with suitable copper nanoflower electrocatalysts. The resulting perovskite photocathodes attain a 9.8% Faradaic yield towards C 2 hydrocarbon production at 0 V against the reversible hydrogen electrode. The catalyst and perovskite geometric surface areas strongly influence C 2 photocathode selectivity, which indicates a role of local current density in product distribution. The thermodynamic limitations of water oxidation are overcome by coupling the photocathodes to Si nanowire photoanodes for glycerol oxidation. These unassisted perovskite–silicon PEC devices attain partial C 2 hydrocarbon photocurrent densities of 155 µA cm -2 , 200-fold higher than conventional perovskite–BiVO 4 artificial leaves for water and CO 2 splitting. These insights establish perovskite semiconductors as a versatile platform towards PEC multicarbon synthesis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Electrochemical impedance spectroscopy of lithium-titanium disulfide rechargeable cells

The two-terminal alternating current impedance of Li/TiS2 rechargeable cells was studied as a function of frequency, state-of-charge, and extended cycling. Analysis based on a plausible equivalent circuit model for the Li/TiS2 cell leads to evaluation of kinetic parameters for the various physicochemical processes occurring at the electrode/electrolyte interfaces. To investigate the causes of cell degradation during extended cycling, the parameters evaluated for cells cycled 5 times were compared with the parameters of cells cycled over 600 times. The findings are that the combined ohmic resistance of the electrolyte and electrodes suffers a tenfold increase after extended cycling, while the charge-transfer resistance and diffusional impedance at the TiS2/electrolyte interface are not significantIy affected. The results reflect the morphological change and increase in area of the anode due to cycling. The study also shows that overdischarge of a cathode-limited cell causes a decrease in the diffusion coefficient of the lithium ion in the cathode.

Narayanan, S. R.↗
DOE OSTI2017

The electrochemical behavior of poly 1-pyrenemethyl methacrylate binder and its effect on the interfacial chemistry of a silicon electrode

The physico-chemical properties of poly (1-pyrenemethyl methacrylate) (PPy) are presented with respect to its use as a binder in a Si composite anode for Li-ion batteries. PPy thin-films on Si(100) wafer and Cu model electrodes are shown to exhibit superior adhesion as compared to conventional polyvinylidene difluoride (PVdF) binder. Electrochemical testing of the model bi-layer PPy/Si(100) electrodes in a standard organic carbonate electrolyte reveal higher electrolyte reduction current and an overall irreversible cathodic charge consumption during initial cycling versus the uncoated Si electrode. The PPy thin-film is also shown to impede lithiation of the underlying Si. XAS, AFM, TGA and ATR-FTIR analysis indicated that PPy binder is both chemically and electrochemically stable in the cycling potential range however significant swelling is observed due to a selective uptake of diethyl carbonate (DEC) from the electrolyte. The increased concentration of DEC and depletion of ethylene carbonate (EC) at the Si/PPy interface leads to continuous decomposition of the electrolyte and results in non-passivating behavior of the Si(100)/PPy electrode as compared to pristine silicon. Consequently, PPy binder improves the mechanical integrity of composite Si anodes but it influences mass transport at the Si(100)/PPy interface and alters electrochemical response of silicon during cycling in an adverse manner.

25 ENERGY STORAGE↗
DOE OSTI2019

Additive Manufacturing of Bi-Continuous Piezocomposites With Triply Periodic Phase Interfaces for Combined Flexibility and Piezoelectricity

An additive manufacturing-enabled bi-continuous piezocomposite architecture is presented to achieve mechanical flexibility and piezoelectricity simultaneously in piezoelectric materials. This architecture comprises an active ferroelectric ceramic phase and a passive flexible polymer phase, which are separated by a tailorable phase interface. Here, triply periodic minimal surfaces were used to define the phase interface, due to their excellent elastic properties and load transfer efficiency. A suspension-enclosing projection-stereolithography process was used to additively manufacture this material. Postprocesses including polymer infiltration, electroding, and poling are introduced. Piezoelectric properties of the piezocomposites are numerically and experimentally studied. The results highlight the role of tailorable triply periodic phase interfaces in promoting mechanical flexibility and piezoelectricity of bi-continuous piezocomposites.

42 ENGINEERING↗
DOE OSTI2019

Ferroelectric Control of Interface Spin Filtering in Multiferroic Tunnel Junctions

The electronic reconstruction occurring at oxide interfaces may be the source of interesting device concepts for future oxide electronics. Among oxide devices, multiferroic tunnel junctions are being actively investigated as they offer the possibility to modulate the junction current by independently controlling the switching of the magnetization of the electrodes and of the ferroelectric polarization of the barrier. In this Letter, we show that the spin reconstruction at the interfaces of a La 0.7 Sr 0.3 MnO 3 /BaTiO 3 /La 0.7 Sr 0.3 MnO 3 multiferroic tunnel junction is the origin of a spin filtering functionality that can be turned on and off by reversing the ferroelectric polarization. The ferroelectrically controlled interface spin filter enables a giant electrical modulation of the tunneling magnetoresistance between values of 10% and 1000%, which could inspire device concepts in oxides-based low dissipation spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Enhanced Electrochemical Performance of Disordered Rocksalt Cathodes Enabled by a Graphite Conductive Additive

Cobalt-free cation-disordered rocksalt (DRX) cathodes are a promising class of materials for next-generation Li-ion batteries. Although they have high theoretical specific capacities (>300 mA h/g) and moderate operating voltages (~3.5 V vs Li/Li + ), DRX cathodes typically require a high carbon content (up to 30 wt %) to fully utilize the active material which has a detrimental impact on cell-level energy density. To assess pathways to reduce the electrode’s carbon content, the present study investigates how the carbon’s microstructure and loading (10–20 wt %) influence the performance of DRX cathodes with the nominal composition Li 1.2 Mn 0.5 Ti 0.3 O 1.9 F 0.1 . While electrodes prepared with conventional disordered carbon additives (C65 and ketjenblack) exhibit rapid capacity fade due to an unstable cathode/electrolyte interface, DRX cathodes containing 10 wt % graphite show superior cycling performance (e.g., reversible capacities ~260 mA h/g with 85% capacity retention after 50 cycles) and rate capability (~135 mA h/g at 1000 mA/g). Furthermore, a suite of characterization tools was employed to evaluate the performance differences among these composite electrodes. Overall, these results indicate that the superior performance of the graphite-based cathodes is largely attributed to the: (i) formation of a uniform graphitic coating on DRX particles which protects the surface from parasitic reactions at high states of charge and (ii) homogeneous dispersion of the active material and carbon throughout the composite cathode which provides a robust electronically conductive network that can withstand repeated charge–discharge cycles. Overall, this study provides key scientific insights on how the carbon microstructure and electrode processing influence the performance of DRX cathodes. Based on these results, exploration of alternative routes to apply graphitic coatings is recommended to further optimize the material performance.

25 ENERGY STORAGE↗
DOE OSTI2026

Solid-state prealkylation of electrode architectures to tune solid electrolyte interphase composition

Efficient electrochemical cycling of certain Si anodes is limited by irreversible Li consumption to form and continually reform the solid electrolyte interface (SEI) due to Si expansion/contraction and fracture. Prelithiation can compensate for these losses; however, the starting open circuit potential (VOC) becomes highly reducing and, therefore, the electrolyte reduction chemistry that influences the SEI composition can change. Herein, we compare SEI formation for electrodes prelithiated using Solid State Prealkylation of Electrode Architectures (SPEAR) versus traditional electrochemically lithiated architectures (ECLAR), focusing on SEI compositional changes as a function of stoichiometry (0.28 ≤ x ≤ 1.38 in LixSi). Increasing SPEAR prelithiation decreased the initial VOC of Si anodes vs. Li/Li+ from ∼3 V (Li0.28Si) to < 0.5 V for Li1.38Si, enabling simultaneous competitive reduction of EC, EMC, and LiPF6 at low potentials. Ex situ7Li and 29Si cross-polarization NMR and XPS reveal that SPEAR drives thicker SEI formation with substantially increased P/F contributions and a predominantly inorganic insoluble SEI (71.4% inorganic for Li1.38Si), consistent with accelerated LiPF6-derived POx/LiPFx/LiF formation relative to ECLAR analogs which exhibit carbonate-rich organic SEI compositions. Symmetric-cell EIS further indicates SPEAR-specific impedance features consistent with pore reduction (filling) during LixSi formation. In full cells, SPEAR prelithiation increases the initial coulombic efficiency (ICE) and accelerates SEI formation and stabilization with Li1.38Si reaching 99.4% coulombic efficiency (CE) by cycle 2.

Musgrove, Amanda [ORNL] (ORCID:0009000220910389)↗
DOE OSTI2025

Operando Infrared Nanospectroscopy of the Silicon/Electrolyte Interface during Initial Stages of Solid-Electrolyte-Interphase Layer Formation

The solid electrolyte interphase (SEI) is a critical component in Li-ion batteries; however, its nanoscale structure and composition and unstable nature make it difficult to characterize and ascertain primary functional mechanisms. We use operando nanoscale Fourier transform infrared spectroscopy (nano-FTIR) with a broadband synchrotron IR source to study the SEI formation on a thin-film Si electrode at nanometer-scale spatial resolution as a function of time and voltage. By probing the Si/carbonate electrolyte interface through a 25 nm-thick amorphous Si window/electrode, we detect molecular vibrational modes within a 10s of nanometers region adjacent to the Si surface and observe that PF6 – anions react to form LiF at 0.5 V. Spatially resolved nano-FTIR spectra showcase subtle nanoscale heterogeneities in the initial solid/liquid interface and the resulting deposited LiF. With its nanoscale resolution and high chemical specificity, operando nano-FTIR provides unique insights into the dynamics and heterogeneous formation of SEIs and opens opportunities for connecting nanoscale interfacial properties to bulk performance metrics.

Dopilka, Andrew↗
NASA NTRS1995

Method for fabricating semiconductor devices

A process for fabricating gold/gallium arsenide structures, in situ, on molecular beam epitaxially grown gallium arsenide. The resulting interface proves to be Ohmic, an unexpected result which is interpreted in terms of increased electrode interdiffusion. More importantly, the present invention surprisingly permits the fabrication of Ohmic contacts in a III-V semiconductor material at room temperature. Although it may be desireable to heat the Ohmic contact to a temperature of, for example, 200 degrees Centigrade if one wishes to further decrease the resistance of the contact, such low temperature annealing is much less likely to have any deleterious affect on the underlying substrate. The use of the term in situ herein, contemplates continuously maintaining an ultra-high vacuum, that is a vacuum which is at least 10.sup.-8 Torr, until after the metallization has been completed. An alternative embodiment of the present invention comprising an additional step, namely the termination of the gallium arsenide by a two monolayer thickness of epitaxial aluminum arsenide as a diffusion barrier, enables the recovery of Schottky barrier behavior, namely a rectified I-V characteristic. The present invention provides a significant breakthrough in the fabrication of III-V semiconductor devices wherein excellent Ohmic contact and Schottky barrier interfaces to such devices can be achieved simply and inexpensively and without requiring the high temperature processing of the prior art and also without requiring the use of exotic high temperature refractory materials as substitutes for those preferred contact metals such as gold, aluminum and the like.

Kaiser, William J.↗
DOE OSTI2023

Voltage-Dependent First-Principles Simulation of Insertion of Chloride Ions into Al/Al 2 O 3 Interfaces Using the Quantum Continuum Approximation

Experiments have shown that pitting corrosion can develop in aluminum surfaces at potentials > − 0.5 V relative to the standard hydrogen electrode (SHE). Until recently, the onset of pitting corrosion in aluminum has not been rigorously explored at an atomistic scale because of the difficulty of incorporating a voltage into density functional theory (DFT) calculations. We introduce the Quantum Continuum Approximation (QCA) which self-consistently couples explicit DFT calculations of the metal-insulator and insulator-solution interfaces to continuum Poisson-Boltzmann electrostatic distributions describing the bulk of the insulating region. By decreasing the number of atoms necessary to explicitly simulate with DFT by an order of magnitude, QCA makes the first-principles prediction of the voltage of realistic electrochemical interfaces feasible. After developing this technique, we apply QCA to predict the formation energy of chloride atoms inserting into oxygen vacancies in Al(111)/α-Al 2 O 3 (0001) interfaces as a function of applied voltage. We predict that chloride insertion is only favorable in systems with a grain boundary in the Al 2 O 3 for voltages > − 0.2 V (SHE). Here our results roughly agree with the experimentally demonstrated onset of corrosion, demonstrating QCA's utility in modeling realistic electrochemical systems at reasonable computational cost.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Magnetoelectric properties at the Co/AlN(0001) interface

AlN nitride is a large-band-gap polar material that has gained interest due to its ability to become ferroelectric and its compatibility with Si- and GaN-based technologies. This compound could, therefore, be a good candidate to design new artificial multiferroics if combined with a ferromagnetic electrode. For this work, we performed first-principles calculations to investigate the set up of the magnetoelectric coupling at the Co/AlN(0001) interface. Our results describe a complex interfacial atomic structure with variable local magnetic properties as a function of the atom alignment. We predict an average variation of interface spin magnetization, when the polarization is reversed, of 3.83 𝜇B nm −2 , close to the values already reported in the literature at metal/oxide interfaces. This confirms the potential of this AlN-based ferroelectric compound to be used in future voltage-controlled spintronic devices.

36 MATERIALS SCIENCE↗
NASA NTRS2016

Influence of Molecular Simulation Model Accuracy on the Interfacial Properties of an Ionic Liquid: Overview of Recommended Practices

Increasing the energy storage capability of ionic liquid supercapacitors will require better understanding of ion-electrode interactions. We have probed the influence of these interactions on the structure and differential capacitance of of an ionic liquid ([EMIM][BF4]) at an ideal graphite interface as a function of model accuracy. Of note, differential capacitance is determined through newly derived and validated fluctuation formulas. In terms of model accuracy, we test electrostatic techniques, electrode charging techniques, and electrolyte interatomic potentials. For electrostatic summations, we employ high cost, high fidelity techniques as well as less expensive, approximate techniques for summation in slab geometry. For electrode charging, uniform, constant-charge and environmentally responsive, constant-potential conditions are employed. For the ionic liquid, constant charge and atomically polarizable models are employed. We comment on the role of model accuracy on the structure and energetics of the electric double layer as well as on the magnitude and shape of differential capacitance.

simulations↗
DOE OSTI2020

Tailoring electrode microstructure via ink content to enable improved rated power performance for platinum cobalt/high surface area carbon based polymer electrolyte fuel cells

Improvements in polymer electrolyte fuel cell (PEFC) electrode performance have primarily focused on catalyst and ionomer developments, marginalizing the importance of catalyst ink formulation. In this study, the effect of ink formulation is examined across a series of cathodes comprised of PtCo supported on high surface area carbon (PtCo/ HSC ) and Nafion ionomer using an array of in situ electrochemical and ex situ characterization techniques. In contrast to prior work on Pt/Vu systems, ink water content had little effect on the electrochemically determined ionomer coverage for the PtCo/HSC electrocatalyst examined here. Characterization using nano-scale resolution X-ray computed tomography (nano-CT) demonstrated that water-rich ink formulations lead to a reduction in aggregate size (ionomer + PtCo/HSC), improving local O 2 transport. This understanding, combined with the use of a commercially-available electrocatalyst was used to produced state-of-the-art membrane electrode assemblies with Pt loadings of 0.03/0.08 mg Pt /cm 2 on the anode and cathode respectively, having; i) > 1 A/mg Pt (0.9 V iR-free , 150 kPa, 80 °C, 100% RH, H 2 /O 2 ), ii) 320 mA/cm 2 at 0.8 V, 150 kPa, 80 ° C, 100% RH, H 2 /Air), and iii) > 1 W/cm 2 elec at rated power (0.67 V, 250 kPa, 94 °C, 65% RH, H 2 /Air) or < 0.11 g Pt /kW rated .

25 ENERGY STORAGE↗
DOE OSTI2020

Ultrathin Free-Standing Oxide Membranes for Electron and Photon Spectroscopy Studies of Solid–Gas and Solid–Liquid Interfaces

Free-standing ultrathin (~2 nm) films of several oxides (Al 2 O 3 ,TiO 2 , and others) have been developed, which are mechanically robust and transparent to electrons with E kin ≥ 200 eV and to photons. We demonstrate their applicability in environmental X-ray photoelectron and infrared spectroscopy for molecular level studies of solid-gas (≥1 bar) and solid-liquid interfaces. These films act as membranes closing a reaction cell and as substrates and electrodes for electrochemical reactions. The remarkable properties of such ultrathin oxides membranes enable atomic/molecular level studies of interfacial phenomena, such as corrosion, catalysis, electrochemical reactions, energy storage, geochemistry, and biology, in a broad range of environmental conditions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2020

Bulk vs Intrinsic Activity of NiFeO x Electrocatalysts in the Oxygen Evolution Reaction: The Influence of Catalyst Loading, Morphology, and Support Material

We used a combination of ultrahigh vacuum surface science techniques, X-ray spectroscopy, electrochemistry, and density functional theory (DFT), to characterize the influence of catalyst morphology, loading/coverage, and substrate material on the bulk (all atoms) and intrinsic (electrochemically accessible atoms) activity of NiFeO x electrocatalysts in the oxygen evolution reaction (OER). NiFeO x catalysts were grown on both Au(111) and highly oriented pyrolytic graphite (HOPG) electrodes. DFT predicted Fe edge-site atoms at the NiFeO x /Au(111) interface to be the most thermodynamically favorable reaction center, and X-ray absorption spectroscopy data indicated small NiFeO x catalyst particles on Au(111) contained a high population of OER active Fe edge-site atoms. However, restructuring of the Au(111) surface due to repeated oxidation and reduction cycles of the OER CV measurements encapsulated small NiFeO x nanoparticles at catalyst loadings below ~1.5 nmol metal /cm 2 , passivated catalyst edges and reduced bulk OER activity of Au-supported NiFeO x compared with HOPG-supported ones. Analysis of intrinsic activity revealed that the Au(111) support strongly benefited electrochemically accessible NiFeO x atoms, and we observed a 2–3 fold activity enhancement compared with HOPG-supported catalysts for loadings above ~1 nmol metal /cm 2 . Overall, evaluating bulk vs intrinsic activity and identifying loading/coverage-dependent support effects is important for accurately probing fundamental interfacial chemistry, choosing suitable catalyst loadings and supports, and optimizing system parameters to maximize the performance of electrocatalyst systems.

36 MATERIALS SCIENCE↗