Search NASA⌕ Search

SEARCH · Search NASA

Results for “facility development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Feasibility of Nitrogen as a Carrier Gas for Inconel Cold Spray in Hydropower Application

Cold spray deposition of Inconel nickel alloys has emerged as a promising strategy for mitigating cavitation erosion in hydropower facilities. Most prior developments employ helium (He) as the carrier gas because it enables high particle velocities and the formation of dense coatings. However, He is nearly two orders of magnitude more expensive than nitrogen (N2), which limits its widespread adoption in the hydropower sector. Although He-based cold spray can be justified for high value repairs, the lower cost and broad availability of N2 make it an attractive alternative. This study assesses the feasibility of N2-based cold spray of Inconel 625 powders for hydropower applications. Cavitation erosion testing shows that He-based coating exhibits cavitation resistance of ~398% relative to the 304L stainless steel (SS304L) substrate. In contrast, N2-based coating shows substantially lower cavitation resistance, reaching only ~69% of the SS304L substrate, even when higher carrier gas temperature and pressure are applied. When the Inconel 625 powder size is reduced from 44 to 22 µm under N2-based cold spray conditions, cavitation resistance increases significantly to ~148% of the SS304L substrate. Additional improvement can be obtained by incorporating fine chromium carbide powders into the feedstock, resulting in cavitation resistance of ~172% of the SS304L substrate. Overall, with optimized feedstock design, N2-based cold spray offers a practical and cost-effective approach for producing cavitation resistant coatings on hydropower components, although He-based cold spray continues to deliver higher cavitation resistance.

Wang, Tianhao↗

Ambient Synthesis of Single‐Atom Catalysts from Bulk Metal via Trapping of Atoms by Surface Dangling Bonds

Abstract Single‐atom catalysts (SACs) feature the maximum atom economy and superior performance for various catalysis fields, attracting tremendous attention in materials science. However, conventional synthesis of SACs involves high energy consumption at high temperature, complicated procedures, a massive waste of metal species, and poor yields, greatly impeding their development. Herein, a facile dangling bond trapping strategy to construct SACs under ambient conditions from easily accessible bulk metals (such as Fe, Co, Ni, and Cu) is presented. When mixing graphene oxide (GO) slurry with metal foam and drying in ambient conditions, the M 0 would transfer electrons to the dangling oxygen groups on GO, obtaining M δ+ (0 < δ < 3) species. Meanwhile, M δ+ coordinates with the surface oxygen dangling bonds of GO to form MO bonds. Subsequently, the metal atoms are pulled out of the metal foam by the MO bonds under the assistance of sonication to give M SAs/GO materials. This synthesis at room temperature from bulk metals provides a versatile platform for facile and low‐cost fabrication of SACs, crucial for their mass production and practical application in diverse industrial reactions.

Qu, Yunteng↗

High Volumetric Capacitance, Ultralong Life Supercapacitors Enabled by Waxberry-Derived Hierarchical Porous Carbon Materials

Supercapacitors with fast charge/discharge rate and long cycling stability (>50 000 cycles) are attractive for energy storage and mobile power supply. In this paper, a facile strategy is developed to fabricate an Fe 2 O 3 /FeS–decorated N, S–codoped hierarchical porous carbon hybrid. Its microstructure and compositions can be readily controlled through adjusting the hydrothermal reaction between waxberry and iron sulfate. The constructed supercapacitors with the as–prepared carbon materials from this reaction are able to exhibit outstanding capacitive performance with a superfast charge/discharge rate (<1 s), ultralong cycle life (>50 000 cycles, 80 A g –1 ), ultrahigh volumetric capacitance (1320.4 F cm –3 , 0.1 A g –1 ), and high energy density (100.9 W h kg –1 , 221.9 W h L –1 ). The outstanding performance makes it one of the best biomass–derived supercapacitors. The superior capacitive behavior is likely to arise from the N and S codoping on the surface/edge/skeleton of the carbon microspheres and nanosheet composites coupled with the fast redox reaction of Fe 2 O 3 /FeS. Altogether, this research presents a new avenue for developing the next generation of sustainable high–performance energy storage device.

36 MATERIALS SCIENCE↗

Low Temperature Solution‐Processed Sb:SnO 2 Nanocrystals for Efficient Planar Perovskite Solar Cells

Abstract Inorganic metal oxide electron‐transport layers (ETLs) have the potential to yield perovskite solar cells with improved stability, but generally need high temperature to form conductive and defect‐less forms, which is not compatible with the fabrication of flexible and tandem solar cells. Here, we demonstrate a facile strategy for developing efficient inorganic ETLs by doping SnO 2 nanocrystals (NCs) with a small amount of Sb using a low‐temperature solution‐processed method. The electrical conductivity was remarkably enhanced by Sb‐doping, which increased the carrier concentration in Sb:SnO 2 NCs. Moreover, the upward shift of the Fermi level owing to doping results in improved energy level alignment, which led to reduced charge recombination, and thus longer electron recombination lifetime and improved open‐circuit voltage ( V OC ). Therefore, Sb‐doping of SnO 2 significantly enhanced the photovoltaic performance of planar perovskite devices by increasing the fill factor and V OC , and reducing photocurrent hysteresis, extending the potential application of low‐temperature‐processed ETLs in future flexible and tandem solar cells.

Bai, Yang↗

Nitrogen-doped graphene-wrapped Cu 2 S as a superior anode in sodium-ion batteries

Sodium-ion batteries (SIBs) have been attracting an ever-growing research interest, mainly ascribed to their cost-effectiveness. However, SIBs have been significantly hindered by lack of a suitable anode. Herein, an exceptional Cu 2 S-based composite anode is developed via a facile ball-milling method, in which Cu 2 S particles are wrapped by nitrogen-doped graphene sheets (Cu 2 S@NG). This Cu 2 S@NG composite anode enables extremely long cycling life, ultra-stable cyclability with high capacity, and excellent rate capability. The superior performance of the Cu 2 S@NG composite is owing to its intriguing core-shell structure and the exceptional properties of both the Cu 2 S and NG. In this study, it is found that the NG shell yields multiple merits in improving the performance of Cu 2 S: (i) mitigating the loss of active materials, (ii) constituting a stable interface, (iii) providing improved electrical conductivity and good ionic transfer, and (iv) enhancing mechanical integrity. Additionally, the vital effects of different voltage windows and a surface coating via atomic layer deposition on further enhancing performance are clarified. Significantly, the electrochemical mechanism of Cu 2 S during sodiation/desodiation is unveiled using advanced synchrotron-based in-situ X-ray diffraction and X-ray adsorption spectroscopy. This work represents a great advance in seeking high-performance anodes in SIBs.

25 ENERGY STORAGE↗

Buoyancy-driven air flow within plenum-to-plenum facility down-comer channel

Reliable measurements of thermal and velocity fields were experimentally investigated under different natural circulation intensities in a dual channel facility designed and developed with a representative geometry of prismatic modular reactor core. Experiments were conducted under steady state conditions to obtain statistically stationary time series signals of temperature and velocity. Insignificant radial temperature variation was observed along the down-comer channel implying that the majority of supplied heat is removed through the upper plenum. Velocity results obtained emphasize the delicate nature of natural circulation phenomena in terms of flow destabilization, and recirculation penetration length. Observed air velocity distribution reveals that downward velocity is proportional to the extent of cooling applied to the setup. The calculated values of the dimensionless group Froude number ( Fr ) in the range of 2 to 10 indicate that air is dominated by momentum and is exiting the channel as a jet. Quantification of turbulent intensities implies that flow destabilization is noticeable along the down-comer channel particularly for the case of high cooling intensity. For 5 °C cooling water temperature, turbulent intensity ($v$ rms / $v$) peaks at the mid-channel (z/L = 0.5) reaching a value of 0.5. This value of turbulent intensity is much higher than the inlet (z/L = 0.96) and outlet (z/L = 0.04) turbulent intensities of 0.2 and 0.06 respectively. This destabilization is because of the flow reversal and heat conduction effects through stainless steel flanges connecting both channels. In conclusion, current results provide detailed velocity and temperature variation which can be useful for validating computational fluid dynamics codes.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) full range solid solution: Structure, optical properties, and magnetism

Graphical abstract: The continuous modulation on crystal structure and band gap is achieved in the Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) full range solid solution. - Highlights: • Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) solid solution was synthesized by a hydrothermal method. • They all present a single-phase in the wolframite structure with space group P2/c. • The continuous tenability in band gap was achieved in Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1). • CoWO{sub 4} and Zn{sub 0.5}Co{sub 0.5}WO{sub 4} are antiferromagnetic and paramagnetic, respectively. - Abstract: A novel full-range solid-solution Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) was successfully developed via a facile one-pot hydrothermal route. The phase structure and microstructure were characterized by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectra and scanning electron microscopy (SEM). The Zn{sub 1−x}Co{sub x}WO{sub 4} solid solution possesses similar wolframite crystal structure with the same space group P2/c. Diffuse reflection spectroscopy (DRS) measurements on Zn{sub 1−x}Co{sub x}WO{sub 4} (0 ≤ x ≤ 1) demonstrated that the optical band gap can be continuously tuned from 3.56 eV to 2.61 eV for direct transition and 1.87 eV for indirect transition, respectively, with increasing x from 0 to 1. Magnetic susceptibility measurements reveal that CoWO{sub 4} has an antiferromagnetic transition at T{sub N} = 42 K, whereas Zn{sub 0.5}Co{sub 0.5}WO{sub 4} exhibits paramagnetic behavior. Moreover, CoWO{sub 4} and Zn{sub 0.5}Co{sub 0.5}WO{sub 4} obey the Curie–Weiss law from 200 k down to 50 K, and their effective magnetic moments were determined.

36 MATERIALS SCIENCE↗

Investigation on zinc substituted highly porous improved catalytic activity of NiFe2O4 nanocrystal by co-precipitation method

Highlights: • A thriftily viable co-precipitation technique has been used to synthesize Zn substituted NiFe{sub 2}O{sub 4} nanoparticles. • An essential structural, optical and magnetic property has been investigated. • Augmentation of Photo-Fenton activity after increasing the zinc concentration has been observed and deliberated. • Strong dependence of photo-fenton activity and cumulative increase degradation efficiency. - Abstract: Connecting to various applications of nickel ferrite as a ceramic magnetic nanocomposite in diverse manufacturing and technical categories, it is essential to optimize its optical, magnetic and microstructural characteristics. Hence a facile route was developed to fabricate nickel zinc ferrite (Ni{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4}) nanocomposites by co-precipitation route. The enviable spinel phase was studied by X-ray diffractometer and the crystallite size was found to vary from 8 to 15 nm. By Transmission Electron Microscopy, the micro structural and speck distribution was found in the range of 5–12.5 nm. Surface characterization was done using the isothermal BET technique which presents a high surface area that is exhibited by synthesized nanoparticles. Using Kubelka-Munk plot, bandgap was found to be decreasing with the increase of Zn concentration.The synthesized Ni{sub 1-x}Zn{sub x}Fe{sub 2}O{sub 4} was studied for its application in photo-Fenton degradation of organic Methylene blue (MB) dye. The synthesized nanocatalyst can bereused further which makes itself a proficient candidate in industrial effluent degradation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Facile synthesis of nitrogen-doped porous carbon as robust electrode for supercapacitors

Highlights: • An efficient and facile method is developed to prepare porous N doped carbon. • A high areal capacitance of 682.8 mF cm{sup −2} is achieved by this electrode. • This electrode also exhibit outstanding cycling preformance. - Abstract: Porous carbon nanomaterials are highly attactive as electrode materials for supercapacitors (SCs), but the relatively low capacitance as a result of their intrinsic electric double-layer mechanism severely hinders their practical applications. In addition, the complicated preparation processes of most porous carbon nanomaterials previously reported is less impressive for large-scale application. In this work, we report an efficient and simple method to synthesize porous N doped carbon (PNC) on flexible carbon cloth as high-performance electrode for SCs. Benefiting from the unique porous architecture and high N dopant content, the as-fabricated PNC electrode delivers excellent capacitive performance. A high areal capacitance of 682.8 mF cm{sup −2} at 2 mA cm{sup −2} and outstanding cycling performance (less than 4% capacitance fading after 10,000 cycles) is achieved by this PNC electrode. This work opens up new opportunities in developing advanced carbon-based electrode for energy storage.

36 MATERIALS SCIENCE↗

Crystallization of potassium-zeolites in organic-free media

A ubiquitous phenomenon in zeolite synthesis is the generation of polymorphs leading to either single or multi-phase products. The use of organic structure-directing agents (OSDAs) often ensures a high degree of phase purity for a desired zeolite; however, OSDAs can be economically and environmentally prohibitive. The use of alkali metals as inorganic structure-directing agents (ISDAs) is a common alternative, although reductions in polymorph specificity and/or purity in organic-free media are significant limitations. Developing more controlled, facile synthesis strategies without the aid of OSDAs relies on understanding how zeolite growth conditions impact polymorph selection and alter the physicochemical properties of crystalline products. Relatively few studies of organic-free syntheses have systematically explored potassium growth media. Here, in this study, we examine synthesis conditions that promote the formation of five K-zeolites: CHA, LTL, MER, EDI, and BPH frameworks. Time-resolved analyses reveal distinct trends in crystallization kinetics and interzeolite transformations for potassium compared to prior studies that have largely focused on Na-zeolites. We also highlight methods to achieve nanosized crystals and markedly reduce crystallization times for zeolites, such as chabazite, which are notoriously difficult to synthesize in organic-free media at reasonable timescales. Collectively, these findings identify routes to control K-zeolite polymorphism and provide general design strategies to tailor their crystallization.

36 MATERIALS SCIENCE↗

Measurements of charge state breeding efficiency at BNL test EBIS

Charge breeding of singly charged ions is required to efficiently accelerate rare isotope ion beams for nuclear and astrophysics experiments, and to enhance the accuracy of low-energy Penning trap-assisted spectroscopy. An efficient charge breeder for the Californium Rare Isotope Breeder Upgrade (CARIBU) to the ANL Tandem Linear Accelerator System (ATLAS) facility is being developed using the BNL Test Electron Beam Ion Source (Test EBIS) as a prototype. Parameters of the CARIBU EBIS charge breeder are similar to those of the BNL Test EBIS except the electron beam current will be adjustable in the range from 1 to 2 {angstrom}. The electron beam current density in the CARIBU EBIS trap will be significantly higher than in existing operational charge state breeders based on the EBIS concept. The charge state breeding efficiency is expected to be about 25% for the isotope ions extracted from the CARIBU. For the success of our EBIS project, it is essential to demonstrate high breeding efficiency at the BNL Test EBIS tuned to the regime close to the parameters of the CARIBU EBIS at ANL. The breeding efficiency optimization and measurements have been successfully carried out using a Cs{sup +} surface ionization ion source for externally pulsed injection into the BNL Test EBIS. A Cs{sup +} ion beam with a total number of ions of 5 x 10{sup 8} and optimized pulse length of 70 {mu}s has been injected into the Test EBIS and charge-bred for 5.3 ms for two different electron beam currents 1 and 1.5 {angstrom}. In these experiments we have achieved 70% injection/extraction efficiency and breeding efficiency into the most abundant charge state 17%.

43 PARTICLE ACCELERATORS↗

A Fast-Valve System for Characterizing Effusive-Flow Properties of Vapor-Transport Systems: RIB Applications

Decay losses, associated with the times required for particles to diffuse from ISOL production targets and to effusively-flow to an ion source, must be reduced to as low as practically achievable levels in order to deliver useful beam intensities of short-lived isotopes for research at ISOL based Radioactive Ion Beam (RIB) facilities. We have developed a fast-valve system and complementary 3-D Monte-Carlo code which can be used separately or in combination to assess the effusive-flow properties of vapor-transport systems, independent of size, geometry and chemical properties of the transport species. In this report, we describe the fast valve and present time spectra and characteristic time data for noble gases flowing through serial- and parallel-coupled vapor-transport systems similar in geometry but longer than those used for RIB generation at the HRIBF with and without target coating matrices.

43 PARTICLE ACCELERATORS↗

Irradiation performance of a U-7Mo in Al-Si matrix dispersion full-size fuel plate assembly

The Korea Atomic Energy Research Institute (KAERI) is leading the Ki-Jang Research Reactor (KJRR) project with the intent to develop a new reactor for medical isotope production and other nuclear research purposes. The KJRR core is designed to use high density fuel system where uranium alloyed with 7 wt% molybdenum (U-7Mo) particles are dispersed in a matrix of aluminum alloyed with 5 wt% silicon (Al-5Si) and clad in aluminum alloy 6061 (Al-6061) to form fuel plates. KAERI developed a fabrication facility to construct KJRR fuel assemblies and partnered with the Idaho National Laboratory (INL) to irradiate a full-size fuel assembly, with 21 total fuel plates, in the Advanced Test Reactor (ATR). Irradiation testing and subsequent Post Irradiation Exam (PIE) campaigns were performed successfully over a multi-year project. Monte Carlo neutronic calculations, coupling with a depletion code, were performed based on ATR’s as-run power history which showed that the highest power plate (plate 20) reached 83.1 % end-of-life (EOL) local burnup based on initial 235 U content. Additionally, finite element thermal modeling was performed based as-run power history which showed a beginning-of-life (BOL) peak local heat flux of 184 W/cm 2 . No anomalous fuel performance was observed during the irradiation and target test conditions were achieved. PIE showed favorable performance of the fuel assembly regarding all important phenomena. This paper describes the KJRR fuel assembly irradiation conditions and PIE data to support the conclusion that it performed well, without evidence of unexpected or problematic fuel performance, within an irradiation test designed to bound the KJRR design environment.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Facile purification and click labeling with 2-[ 18 F]fluoroethyl azide using solid phase extraction cartridges

In this paper, a facile method was developed to purify 2-[ 18 F]fluoroethyl azide ([ 18 F]FEA) using a C18 cartridge and an Oasis® HLB cartridge in series, in which [18F]FEA was exclusively trapped on the HLB cartridge. [ 18 F]FEA can be eluted for reactions in solution; alternatively click labeling can be carried out on the HLB cartridge itself by loading an alkyne substrate and copper (I) catalyst dissolved in DMF onto the cartridge. Finally, this solid phase extraction methodology for purification and click labeling with [ 18 F]FEA, either in solution or on the cartridge, is safe, simple, reproducible in high yield, and compatible with automated synthesis of 18 F-labeled PET tracers.

2-Fluoroethyl azide↗

Mechanism of Additive-Assisted Room-Temperature Processing of Metal Halide Perovskite Thin Films

Perovskite solar cells have received substantial attention due to their potential for low-cost photovoltaic devices on flexible or rigid substrates. Thiocyanate (SCN)-containing additives, such as MASCN (MA = methylammonium), have been shown to control perovskite film crystallization and the film microstructure to achieve effective room-temperature perovskite absorber processing. Nevertheless, the crystallization pathways and mechanisms of perovskite formation involved in MASCN additive processing are far from clear. Using in situ X-ray diffraction and photoluminescence, we investigate the crystallization pathways of MAPbI 3 and reveal the mechanisms of additive-assisted perovskite formation during spin coating and subsequent N 2 drying. In this work, we confirm that MASCN induces large precursor aggregates in solution and, during spin coating, promotes the formation of the perovskite phase with lower nucleation density and overall larger initial nuclei size, which forms upon reaching supersaturation in solution, in addition to intermediate solvent-complex phases. Finally, during the subsequent N 2 drying, MASCN facilitates the dissociation of these precursor aggregates and the solvate phases, leading to further growth of the perovskite crystals. Our results show that the nature of the intermediate phases and their formation/dissociation kinetics determine the nucleation and growth of the perovskite phase, which subsequently impact the film microstructure. These findings provide mechanistic insights underlying room-temperature, additive-assisted perovskite processing and help guide further development of such facile room-temperature synthesis routes.

36 MATERIALS SCIENCE↗