Search NASA⌕ Search

SEARCH · Search NASA

Results for “functional groups”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Thermally Evaporated Naphthalene Diimides as Electron Transport Layers for Perovskite Solar Cells

Thermally evaporated organic electron transport layers (ETLs) have the potential to enable high-performance and scalable perovskite solar cells (PSCs). Among these, naphthalene diimide (NDI)-based ETLs are a promising family of materials that exhibit the optoelectronic properties, ambient stability and versatility required of high-performance ETLs. Here, we synthesized five NDI derivatives with varying functional groups and identified the two most promising candidates for evaluating the impact of molecular structure on processability via thermal evaporation. While phosphonic acid functionalization was shown to introduce thermal instability, leading to chemical changes during evaporation, NDI-bis N-phenyl-bromide (NDI-(PhBr) 2 ) emerged as a promising ETL candidate. NDI-(PhBr) 2 demonstrated excellent compatibility with the thermal evaporation process and enabled PSCs with power conversion efficiencies (PCEs) of 15.6%, surpassing all previously reported PSCs containing thermally evaporated NDI ETLs. Furthermore, NDI-(PhBr) 2 exhibited excellent operational stability, retaining 75% of the initial PCE after 150 h of operation under continuous illumination at 65 °C. These results highlight the potential of NDI-based ETLs for advancing the scalability and performance of PSCs.

36 MATERIALS SCIENCE↗

Experimental and Kinetic Modeling Study of 3-Methyl-2-butenol (Prenol) Oxidation

Longer chain alcohols with 4–5 carbon atoms are attractive alternative fuels as they can be derived from biological sources and since their combustion leads to lower exhaust gas levels of NO x and soot compared to commercial fossil fuels. The auto-ignition behavior of fuels that contain both a hydroxyl group and a C=C double bond in their molecular structure is not well established in the literature. Understanding the influence of these functional groups on the ignition behavior of fuels is critical in the development of tailor-made fuels for advanced combustion engines. In this study, ignition delay times of an unsaturated alcohol, 3-methyl-2-butenol (prenol), are measured using a high-pressure shock tube and a rapid compression machine at pressures of 15 and 30 bar at equivalence ratios of 0.5, 1.0, and 2.0 in “air” in the temperature range 600–1400 K. Furthermore, a detailed kinetic model is developed and validated using the new experimental data in this study. In addition, speciation data in a jet-stirred reactor, ignition delay times, and laminar burning velocities available in the literature were also used to validate the new kinetic model. Fuel flux and sensitivity analyses are performed using this new model to determine the important fuel consumption pathways and critical reactions that affect the reactivity of prenol.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Click-chemistry compatible structures, click-chemistry functionalized structures, and materials and methods for making the same

According to various embodiments, systems, methods, and computer program products for click-chemistry compatible structures, additive manufacturing resins for forming the same, and method of formation of such structures and resins, as well as techniques for functionalizing click-chemistry compatible structures are disclosed. The inventive structures generally include a plurality of photo polymerized molecules structurally arranged according to a three-dimensional pattern, while surfaces of the structure are functionalized with one or more click-chemistry compatible molecules each having one or more click-chemistry compatible functional groups. The structures may be formed from single- or dual-component resins, each having unique synthetic pathways. The resulting structures may be functionalized for utility in a wide range of applications by leveraging click chemistry to further functionalize the structure with organic additives also compatible with click-chemistry reaction schemes.

36 MATERIALS SCIENCE↗

Toxicity of Common Fluoropolymers and PFAS on C. Elegans and an Innovative Strategy to Promote in Situ Remediation - 26128

Per- and polyfluoroalkyl substances (PFAS) are a broad class of synthetic chemicals used in a variety of modern technologies and consumer products. PFAS have an alkyl backbone with all or most of the hydrogen (H) atoms replaced with fluorine (F) atoms. PFAS generally fall into one of two categories, they can be non-polymeric with relatively low molecular weights, or long-chain polymers. PFAS are a diverse group of organic compounds that can be solids, liquids, dispersions, or gases. Their mobility and toxicity are influenced by their chain lengths and functional groups. Non-polymeric PFAS are common building blocks for the manufacturing of fluoropolymers. Non-polymeric PFAS are known to be mobile in the environment and some are considered contaminants of emerging concern. Polymeric PFAS, or fluoropolymers, are typically thought to be of low concern, however few systematic investigations into their toxicity have been completed. PFAS, including fluoropolymers and microplastics, have been found in pristine environments and animals located far from site of origin including the arctic and deep ocean.

Jacobs, Stephanie [Savannah River National Laborat↗

Organization and Management of the International Space Station (ISS) Multilateral Medical Operations

The goal of this work is to review the principles, design, and function of the ISS multilateral medical authority and the medical support system of the ISS Program. Multilateral boards and panels provide operational framework, direct, and supervise the ISS joint medical operational activities. The Integrated Medical Group (IMG) provides front-line medical support of the crews. Results of ongoing activities are reviewed weekly by physician managers. A broader status review is conducted monthly to project the state of crew health and medical support for the following month. All boards, panels, and groups function effectively and without interruptions. Consensus prevails as the primary nature of decisions made by all ISS medical groups, including the ISS medical certification board. The sustained efforts of all partners have resulted in favorable medical outcomes of the initial fourteen long-duration expeditions. The medical support system appears to be mature and ready for further expansion of the roles of all Partners, and for the anticipated increase in the size of ISS crews.

Duncan, J. M.↗

Synthesis, crystal structure and optical properties of the new lead fluoride borate-Pb{sub 2}BO{sub 3}F

A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. The crystal structure of this compound has been identified by single crystal X-ray diffraction analysis. It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. Its structure was solved by the direct methods and refined to R{sub 1}=0.0163 and wR{sub 2}=0.0367. The structure of Pb{sub 2}BO{sub 3}F consists of the distorted PbO{sub 3}F{sub 2} groups and BO{sub 3} triangles, which are all symmetric with each other in the gestalt structure to the extent that the Pb{sub 2}BO{sub 3}F compound crystallizes in the symmetric space group. The powder X-ray diffraction pattern of the Pb{sub 2}BO{sub 3}F has been measured. The BO{sub 3} functional groups presented in the sample were identified by FTIR spectrum. The DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C. - Graphical Abstract: The Pb atoms are in the five coordination environments bonded to three O atoms and two F atoms to make up the distortional PbO{sub 3}F{sub 2} polyhedra. Every six PbO{sub 3}F{sub 2} polyhedra are connected by one F(1) atom to form the symmetrical structure, and then the distortion of the PbO{sub 3}F{sub 2} polyhedra is offset. Highlights: > A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. > It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. > UV-vis-NIR Diffuse-Reflectance spectrum shows that its ultraviolet cutoff edge is about 288 nm. > DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, surface group modification of 3D MnV{sub 2}O{sub 6} nanostructures and adsorption effect on Rhodamine B

Highlights: ► Fabrication of urchin-like MnV{sub 2}O{sub 6} with oxygen-containing surface groups. ► Mn{sub 0.5}V{sub 2}O{sub 5}·nH{sub 2}O as an intermediate product holds the key to the final products. ► 3D architectures of MnV{sub 2}O{sub 6} with oxygen-containing surface groups as sorbent. ► The sorbent shows a good adsorption ability. -- Abstract: Highly uniform 3D MnV{sub 2}O{sub 6} nanostructures modified by oxygen functional groups (-COO-) were successfully prepared in large quantities by an approach involving preparation of vanadyl ethylene glycolate as the precursor. The growth and self-assembly of MnV{sub 2}O{sub 6} nanobelts and nanorods could be readily tuned by additive species and quantities, which brought different morphologies and sizes to the final products. With a focus on the regulation of structure, the formation process of 3D architectures of MnV{sub 2}O{sub 6} by self-assembly of nanobelts was followed by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD). The consecutive processes of vanadyl ethylene glycolate and benzoyl peroxide assisted formation of layered structure Mn{sub 0.5}V{sub 2}O{sub 5}·nH{sub 2}O, growth of aligned MnV{sub 2}O{sub 6} nanobelts, and oriented assembly were proposed for the growth mechanism. The band gap vs. different morphology was also studied. Optical characterization of these MnV{sub 2}O{sub 6} with different morphologies showed direct bandgap energies at 1.8–1.95 eV. The adsorption properties of 3D MnV{sub 2}O{sub 6} nanostructures synthesized under different conditions were investigated through the removal test of Rhodamine B in aqueous water, and the 3D nanostructures synthesized with 30 g L{sup −1} benzoyl peroxide showed good adsorption capability of Rhodamine B.

36 MATERIALS SCIENCE↗

High-level computer molecular modeling for low-rank coal containing metal complexes and iron-catalyzed steam gasification

Low-rank coal is a complex mixture; consequently, it is necessary to develop simpler molecular representations for computational modeling. Our modeling objective has been to develop molecules suitable for semi-empirical (SE) computations of low-rank coal containing transition-metal complexes. These molecular models contain oxygen functional groups that are macro-ligands, forming coordination complexes with specific three-dimensional (3D) orientations; consequently, we develop models that encapsulate the properties of low-rank coals and can form metal complexes. The large computer resources required for SE calculations of these molecules limited their size; of the models examined, those containing numerous short links between phenyl groups caused excessive strain and were unsuitable to model transition-metal complexes. Computations (SE) of our models provided data on (i) hydrogen bonds of coal containing water, (ii) formation of aqua-inorganic species and transition-metal complexes, (iii) pyrolysis chemistry involving transformations of metal hydroxide/oxides, (iv) routes for H{sub 2} and CO formation, and (v) mechanism of iron-catalyzed steam gasification. Our char models, on the basis of transformations of the coal model, were consistent with low-temperature pyrolysis; these were disordered structures with some phenyl groups spaced between 0.35 and 0.4 nm. Smaller models of char and chars containing transition-metal clusters were optimized with SE and density functional theory (DFT) computations; these models were useful in modeling the mechanism of catalytic steam gasification. Our modeling of the mechanisms of iron-catalyzed steam gasification was consistent with experimental data. 44 refs., 5 figs., 5 tabs.

01 COAL, LIGNITE, AND PEAT↗

Structure–Function Analysis of the Extended Conformation of a Polyketide Synthase Module

Catalytic modules of assembly-line polyketide synthases (PKSs) have previously been observed in two very different conformations—an “extended” architecture and an “arch-shaped” architecture—although the catalytic relevance of neither has been directly established. By the use of a fully human naïve antigen-binding fragment (F ab ) library, a high-affinity antibody was identified that bound to the extended conformation of a PKS module, as verified by X-ray crystallography and tandem size-exclusion chromatography–small-angle X-ray scattering (SEC–SAXS). Kinetic analysis proved that this antibody-stabilized module conformation was fully competent for catalysis of intermodular polyketide chain translocation as well as intramodular polyketide chain elongation and functional group modification of a growing polyketide chain. Furthermore, the extended conformation of a PKS module is fully competent for all of its essential catalytic functions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Spectral identification of chemisorbed CO2 and application to Mars analog materials

The goal of this work is to identify the spectral signature of chemisorbed CO2, to test the efficacy of carbonate formation on Mars-analog materials via CO2 chemisorption, and to identify the surface-chemical characteristics of good chemisorbents, with the intent of assessing the possible geochemical importance of CO2 chemisorption as a quasipermanent CO2 sink in the Martian environment. Our approach is to search for infrared spectral bands that result from chemisorption of CO2 molecules onto chemical reagents and Mars-analog materials, and to identify the salient differences in adsorbents that favor strong, permanent CO2 chemisorption. The total amount of CO2 in the early Martian atmosphere, and consequent surface temperatures, are unknown. A CO2 greenhouse may not have been an adequate mechanism under any circumstances; however, it if were, then most of that CO2 must still be in the near-surface environment; no escape mechanism that could remove it after the decline of channeling has been identified. The only plausible reservoir is carbonate, and there are various remote sensing techniques that can be used to search for it. We are investigating CO2 chemisorption as a permanent CO2 sink, and to aid in interpretation of remotely sensed IR spectra of Mars. A common effect reported in CO2 adsorption studies is the formation of a layer of carbonate or bicarbonate anions on adsorbents that have OH- groups available on their surfaces. Inorganic hydroxyls occur on phyllosilicates, amorphous silicates, metal oxides and hydroxides; it is the most abundant and reactive surface functional group on the surfaces of terrestrial silicates. The process responsible for the reaction is chemisorption. Chemisorption is distinguished from physical adsorption in that there is a transfer of electrons between species, and the formation of a chemical bond. The heat of chemisorption is typically of the same order as heats of chemical reaction (i.e., a few hundred to a few thousand kJ/mole), as opposed to heats of physical adsorption (a few kJ per mole). Chemisorption is an activated process that is promoted by an increase in temperature - quite the opposite of physical adsorption. Chemisorption is not reversible in the sense that physical adsorption is.

Zent, A. P.↗

Sol–gel synthesis of MCM-41 silicas and selective vapor-phase modification of their surface

Silica particles with uniform hexagonal mesopore architecture were synthesized by template directed sol–gel condensation of tetraethoxysilane or mixture of tetraethoxysilane and (3-chloropropyl)triethoxysilane in a water–ethanol–ammonia solution. Selective functionalization of exterior surface of parent materials was carried out by postsynthetic treatment of template-filled MCM-41 and Cl-MCM-41 with vapors of (3-chloropropyl)triethoxysilane and 1,2-ethylenediamine in vacuum. The chemical composition of obtained mesoporous silicas was estimated by IR spectroscopy and chemical analysis of surface products of reactions. Characteristics of porous structure of resulting materials were determined from the data of X-ray, low-temperature nitrogen ad-desorption and transmission electron microscopy measurements. Obtained results confirm invariability of highly ordered mesoporous structure of MCM-41 and Cl-MCM-41 after their selective postsynthetic modification in vapor phase. It was proved that proposed method of vapor-phase functionalization of template-filled starting materials is not accompanied by dissolution of the template and chemical modification of pores surface. This provides preferential localization of grafted functional groups onto the exterior surface of mesoporous silicas. - Graphical abstract: Sol–gel synthesis and postsynthetic chemical modification of template-filled MCM-41 and Cl-MCM-41 with (3-chloropropyl)triethoxysilane and 1,2-ethylenediamine in vapor phase. Display Omitted - Highlights: • Synthesis of MCM-41 silica by template directed sol–gel condensation. • Selective vapor-phase functionalization of template-filled silica particles. • Preferential localization of grafted groups onto the exterior surface of mesoporous silicas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Divergent Mechanistic Routes for the Formation of gem-Dimethyl Groups in the Biosynthesis of Complex Polyketides

The gem-dimethyl groups in polyketide-derived natural products add steric bulk and, accordingly, lend increased stability to medicinal compounds, however, our ability to rationally incorporate this functional group in modified natural products is limited. In order to characterize the mechanism of gem-dimethyl group formation, with a goal toward engineering of novel compounds containing this moiety, the gem-dimethyl group producing polyketide synthase (PKS) modules of yersiniabactin and epothilone were characterized using mass spectrometry. The work demonstrated, contrary to the canonical understanding of reaction order in PKSs, that methylation can precede condensation in gem-dimethyl group producing PKS modules. Experiments showed that both PKSs are able to use dimethylmalonyl acyl carrier protein (ACP) as an extender unit. Interestingly, for epothilone module8, use of dimethylmalonyl-ACP appeared to be the sole route to form a gem-dimethylated product, while the yersiniabactin PKS could methylate before or after ketosynthase condensation.

Poust, S↗

Changes in the quaternary structure of amelogenin when adsorbed onto surfaces

The amelogenin protein is involved in the formation of highly controlled and anisotropic hydroxyapatite crystals in tooth enamel. Amelogenin is unique in that it self assembles to form supramolecular quaternary structures called “nanospheres,” spherical aggregates of amelogenin monomers typically 20-60 nm in diameter. Although nanospheres have been observed in solution, the quaternary structure of amelogenin adsorbed onto surfaces is not well known. A better understanding of the surface structure is of great importance, however, because the function of amelogenin depends on it. We report studies of the adsorption of amelogenin onto self-assembled monolayers (SAMs) containing COOH and CH3 end group functionality as well as single crystal fluoroapatite (FAP), a biologically relevant surface. The supramolecular structures of the protein in solution as determined by dynamic light scattering (DLS) were compared with the supramolecular structures of the protein physisorbed onto surfaces as studied by atomic force microscopy (AFM). We found that although our solutions contained only nanospheres of narrow size distribution, smaller structures such as monomers and dimers were observed onto both hydrophilic and hydrophobic surfaces. This suggests that amelogenin can adsorb onto surfaces as small structures that peel away or “shed” from the nanospheres that are present in solution.

59 BASIC BIOLOGICAL SCIENCES↗

Solution‐Like Water Transport Across Molecular to Macroscopic Length Scales in Crosslinked Poly(Ethylene Glycol Diacrylate) Networks With Tailored Sidechains

Poly(ethylene glycol) (PEG)‐based materials, like PEG‐diacrylate (PEGDA), are prized for their hydrophilic, inert properties, and leveraged in hydrogels and as membrane mimics. While network chemistry is often tuned for selective transport and antifouling, fundamental understanding of water dynamics at the network surface and the impact on bulk transport is limited. We utilize Overhauser dynamic nuclear polarization (ODNP) to measure nanoscale water diffusivity near a tethered spin label at the water‐polymer surface and compare it to bulk water diffusivity from pulsed field gradient (PFG) NMR. Via active ester chemistry, spin labels and varied sidechain chemistries are introduced, modulating network hydrophilicity. Tuning network hydration through crosslinker content and functional groups further impacts water diffusivity. Results show rapid nanoscale water transport at the polymer surface, reflecting network volumetric water content, with further modulation by sidechain functionality. These findings demonstrate PEGDA's utility as a membrane mimic and the critical impact of network chemistry on water transport.

hydrogels↗

Atomic Fingerprinting of Heteroatoms Using Noncontact Atomic Force Microscopy

We report immense strides have been made in increasing the resolution of scanning probe microscopy. Noncontact atomic force microscopy (n-AFM) now offers one the ability to characterize and visualize single molecules with subatomic resolution. Specifically, nc-AFM with a carbon monoxide (CO) functionalized tip has the ability to discriminate functional groups (–C≡C–, –CH 2 , –C$=$O, …), although discriminating atomic species often remains as an ongoing challenge. Here, real-space pseudopotentials constructed within density functional theory are employed to accurately simulate nc-AFM images of molecules containing heteroatoms (S, I, and N) within dibenzothiophene (DBT), 2-iodotriphenylene (ITP), acridine (ACR) and ferrous phthalocyanine (FePc). It is found that S and I atoms can be easily identified from C based on their unique features. For N atoms, a use of tip functionalization is proposed to effectively discriminate them from C atoms.

36 MATERIALS SCIENCE↗

Lignin as a bioactive polymer and heavy metal absorber- an overview

As a pulping and bio-refinery by-product with phenolic chemical structure, lignin indicated high potential as natural antioxidant activity, UV blocker, antibacterial and toxic material absorbent properties. Presence of phenolic hydroxyl groups in lignin structure plays the main role of its antioxidant activity. However, lignin antioxidant power can change depending on its other structural features and functional groups like ortho-methoxy groups, –OCH 3 groups, the α-CH 2 groups, the aliphatic carbonyl groups, and the size of π-conjugated systems. Lignin in mixture with synthetic polymers, improved their thermal stability. Lignin has high UV light absorbing potential in broad-spectrum (UVA, UVB). Adding 1–5% of lignin into hand cream indicated excellent range of sun protection factor (SPF) with more than 95% UV light absorption. Lignin also indicated strong UV light protection when applied in different transparent film and protect paint, oil, and varnish from UV degradation. Further, lignosulfonate and other modified lignin including chemically modification, nano-particles and lignin hydrogel indicated high potential as heavy metal absorber.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Durable and Highly Selective Ion Transport of a Sulfonated Diels Alder Poly(phenylene) for Vanadium Redox Flow Batteries

In order to improve the durability and ion selectivity of a hydrocarbon membrane for vanadium redox flow batteries (VRFBs) a polymer was rationally designed with an external hydrophobic shell and internal hydrophilic core. The polymer was designed to prevent hydrophilic polymer chain aggregation by functionalizing the external polymer shell with hydrophobic side chains and attaching acid moieties onto the polymer backbone. The hydrophobic shell is the result of pentafluorobenzoyl group functionalization on the pendent aryl rings in a Diels Alder poly(phenylene) backbone. The internal polymer chain contains sulfonic acid moieties to impart hydrophilic character. The physical and electrochemical characteristics of the membrane were systematically studied and compared with widely used Nafion-212. The synthesized membranes were found to be superior to Nafion-212 not only in terms of lower vanadium ion permeability (4.25 x 10 -8 vs. Nafion-212: 6.0 x 10 -6 cm 2 min -1 ) but also in higher VRFB performance (EE = 89% and vs. Nafion-212: 85.5% at 40 mA/cm 2 ). The membrane also showed over three times higher capacity retention than Nafion-212 (0.075 % vs. 0.25 % capacity loss per cycle respectively) and excellent ex situ and in situ chemical stability.

25 ENERGY STORAGE↗

CO 2 Sorption in Moisture Swing Anion Exchange Resins for Direct Air Capture: Experimental Isotherm Determination and Modeling

Moisture swing (MS) sorption is a promising direct air capture (DAC) technology to achieve negative CO 2 emissions and counter global warming. Here, in this study, MS CO 2 sorption in a model MS sorbent, IRA900, was investigated. IRA900 is a macroporous commercial strong-base anion exchange resin (AER) with quaternary ammonium functional groups. A rigorous CO 2 desorption process was developed to desorb all CO 2 from the sample and obtain CO 2 sorption isotherms as a function of relative humidity, CO 2 partial pressure, and temperature. CO 2 sorption increased with decreasing relative humidity, decreasing temperature, and increasing CO 2 partial pressure. Remarkably, the total CO 2 uptake from the sorption isotherms matched the ion exchange capacity (IEC) of the material, suggesting a stoichiometry of one CO 2 molecule reacting per active site. An isotherm model for CO 2 sorption starting with empty sorption sites (i.e., with the AER in the OH – form) described the experimental data well, supporting the hypothesis that the bicarbonate-loaded AER fully unloaded to the OH – state following rigorous CO 2 desorption. CO 2 sorption kinetics were studied, and carbon diffusion coefficients were estimated as a function of %RH and CO 2 partial pressure. Overall, this study provides a roadmap for the systematic evaluation of MS CO 2 DAC materials.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗