SEARCH · Search NASA
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A technique based on clustering is described for characterizing the current workload of a computer system and for predicting future workload. The technique was applied to predicting the load for an installation operating two machines processing about 20,000 job steps per month.
Progress in the development and future requirements of the Variable Stream Control Engine (VSCE) are presented. The two most critical components of this advanced system for future supersonic transports, the high performance duct burner for thrust augmentation, and the low jet coannular nozzle were studied. Nozzle model tests substantiated the jet noise benefit associated with the unique velocity profile possible with a coannular nozzle system on a VSCE. Additional nozzle model performance tests have established high thrust efficiency levels only at takeoff and supersonic cruise for this nozzle system. An experimental program involving both isolated component and complete engine tests has been conducted for the high performance, low emissions duct burner with good results and large scale testing of these two components is being conducted using a F100 engine as the testbed for simulating the VSCE. Future work includes application of computer programs for supersonic flow fields to coannular nozzle geometries, further experimental testing with the duct burner segment rig, and the use of the Variable Cycle Engine (VCE) Testbed Program for evaluating the VSCE duct burner and coannular nozzle technologies.
BANDIT has been implemented into the NASTRAN April '83 release. It is now a permanent feature in NASTRAN and will be included in all future releases for all four computing machines (IBM, CDC, UNIVAC, and VAX). Originally BANDIT operated as a preprocessor of NASTRAN. It read the NASTRAN input cards and produced a set of resequencing (SEOGP) cards that would greatly reduce the computational time required by the matrix decomposition module of NASTRAN for a large structure. In the past, many computer centers had installed BANDIT in their systems together with the NASTRAN program. The user would run the BANDIT program and NASTRAN as if they were one program (or two separated programs depending on how the two programs were actually tied together in the computer systems). In some cases, the user was required to pass the input cards and the output SEQGP cards between the two programs, and n others, the data was manipulated through the use of cataloged disc files. Although there is nothing wrong with this BANDIT-NASTRAN arrangement, there are, however, several shortcomings which are mentioned in this paper. The BANDIT in the NASTRAN April '83 release has removed all the deficiencies, and it comes in one version applicable to the four computing machines.
Solute redistribution during directional solidification of HgCdTe is addressed. Both one-dimensional and two-dimensional models for solute redistribution are treated and model results compared to experiment. The central problem studied is the cause of radial inhomogeneities found in directionally solidified HgCdTe. A large scale gravity-driven interface instability, termed shape instability, is postulated to be the cause of radial inhomogeneities. Recommendations for future work, along with appropriate computer programs, are included.
Data collected by the lightning data concentrator are available for research. The Mark 3 McIDAS capability provides greater flexibility for the Marshall user community and serves as a model of future UW McIDAS to remote computer links. Techniques were investigated for the display of dynamic 3-D data sets. To date the most promising display technology is a polarized two CRT perspective display which allows both dynamic 3-D images and graphics presentations with full color capability. Algorithms were for the preparation and display of conventional and satellite based weather data in 3-D. These include gridding, contouring, and streamlining processors which operate on both real time and case study data bases. An upper air trajectory model was implemented which creates a display of air parcel trajectories in perspective 3-D. A subsystem for the generation of 3-D solid surface display with shading and hidden surface display with shading and hidden surface removal was tested and its products are currently being evaluated. Motion parallax introduced by moving the point of observation during display is an important depth cue, which, when added to the perspective parallax creates a very realistic appearing display.
This paper describes the National Transonic Facility (NTF) computer complex and its support of tunnel operations. The capabilities of the research data acquisition and reduction are discussed along with the types of data that can be acquired and presented. Pretest, test, and posttest capabilities are also outlined along with a discussion of the computer complex to monitor the tunnel control processes and provide the tunnel operators with information needed to control the tunnel. Planned enhancements to the computer complex for support of future testing are presented.
For space-based propellant production, automation of the process is needed. Currently, all phases of terrestrial production have some form of human interaction. A mixer was acquired to help perform the tasks of automation. A heating system to be used with the mixer was designed, built, and installed. Tests performed on the heating system verify design criteria. An IBM PS/2 personal computer was acquired for the future automation work. It is hoped that some the mixing process itself will be automated. This is a concept demonstration task; proving that propellant production can be automated reliably.
A three-dimensional full Navier-Stokes (FNS) analysis was performed on a mixer/ejector nozzle designed to reduce the jet noise created at takeoff by a future supersonic transport. The PARC3D computational fluid dynamics (CFD) code was used to study the flow field of the nozzle. The grid that was used in the analysis consisted of approximately 900,000 node points contained in eight grid blocks. Two nozzle configurations were studied: a constant area mixing section and a diverging mixing section. Data are presented for predictions of pressure, velocity, and total temperature distributions and for evaluations of internal performance and mixing effectiveness. The analysis provided good insight into the behavior of the flow.
A three-dimensional full Navier-Stokes (FNS) analysis was performed on a mixer/ejector nozzle designed to reduce the jet noise created at takeoff by a future supersonic transport. The PARC3D computational fluid dynamics (CFD) code was used to study the flow field of the nozzle. The grid that was used in the analysis consisted of approximately 900,000 node points contained in eight grid blocks. Two nozzle configurations were studied: a constant area mixing section and a diverging mixing section. Data are presented for predictions of pressure, velocity, and total temperature distributions and for evaluations of internal performance and mixing effectiveness. The analysis provided good insight into the behavior of the flow.
A new Pseudo Random Noise (PN) modulated CW diode laser radar system is being developed for real time ranging of targets at both close and large distances (greater than 10 KM) to satisy a wide range of applications: from robotics to future space applications. Results from computer modeling and statistical analysis, along with some preliminary data obtained from a prototype system, are presented. The received signal is averaged for a short time to recover the target response function. It is found that even with uncooperative targets, based on the design parameters used (200-mW laser and 20-cm receiver), accurate ranging is possible up to about 15 KM, beyond which signal to noise ratio (SNR) becomes too small for real time analog detection.
The Teacher Enhancement Institute (TEI), under the direction of the Center Education Programs Officer offered three two-week workshops to 58 elementary and middle school teachers in science, math, and technology using the Problem Based Learning Model. The 1995 program was designed with input from evaluations and recommendations from previous TEI participants and faculty. The TEI focused on Aviation and Aeronautics as the unifying theme. Four specific objectives were developed. After completing the requirements for the TEI, the participants should be able to: (1) Increase their content knowledge, particularly in aeronautics, science, math, and technology; (2) Design and implement lessons that use scientific inquiry through Problem Based Learning; (3) Demonstrate knowledge of instructional technologies, their uses, and applications to curricula; and (4) Disseminate to their school communities the information acquired through the TEI. Thirty percent of the program was devoted to the effective use of computer technology. SpaceLink, the NASA telecomputing service for educators, was the primary tool used in the technology component of the institute. The training focused on the use of SpaceLink and its many educational services, and Internet tools because of its universal, nongraphical link to any computer plafform the participant may use at his or her school or home. All participants were given Educator Accounts to facilitate the use of E-mail, and access to the Internet and the World Wide Web using their SpaceLink accounts. Classroom demonstrations used videotaped guides and handouts to support concepts presented followed by intensive hands-on activities. Each participant was assigned to an individual Power Mac networked workstation and introduced to the state of the art, graphical, Word Wide Web with the Netscape browser. The methodology proved very effective in reaching the program's goals for technology integration by having the participants learn to use the computer as a tool for communication and research rather than teaching the use of any particular software application alone. However, because of the skill level of the majority of the participants, more hands-on computer time is recommended for future Teacher Enhancement Institutes.
Direct numerical simulation of turbulent reacting flows places extreme demands on computational resources. At the present time, simulations can be performed only for greatly simplified reaction systems and for very low Reynolds numbers. Direct simulation of more realistic cases occurring at higher Reynolds number and including multiple species and numerous chemical reactions will exceed available computational resources far into the future. Because of this, there is a clear need to develop the technique of large eddy simulation for reacting flows. Unfortunately this task is complicated by the fact that combustion arises from chemical reactions that occur at the smallest scales of the flow. Capturing the large-scale behavior without resolving the small-scale details is extremely difficult in combustion problems. Thus LES modeling for turbulent combustion encounters difficulties not present in modeling momentum transport, in which the main effect of the small scales is to provide dissipation. The difficulty is more pronounced in premixed combustion, where detailed chemistry plays an essential role in determining the flame speed (or overall burning rate); in nonpremixed combustion infinite rate chemistry can be assumed, eliminating the small scale features to a first approximation.
This document describes the design and plan of the Extended Operating Configuration 2 (EOC-2) for the Numerical Aerodynamic Simulation division (NAS). It covers the changes in the computing environment for the period of '93-'94. During this period the computation capability at NAS will have quadrupled. The first section summarizes this paper: the NAS mission is to provide, by the year 2000, a computing system capable of simulating an entire aerospace vehicle in a few hours. This will require 100 GigaFlops sustained performance. The second section contains information about the NAS user community and the computational model used for projecting future requirements. In the third section, the overall requirements are presented, followed by a summary of the target EOC-2 system. The following sections cover, in more detail, each major component that will have undergone change during EOC-2: the high speed processor, mass storage, workstations, and networks.
The Crustal Dynamics Data Information System (CDDIS) has served as a global data center for the International GPS Service (IGS) since its start in June 1992, providing on-line access to data from nearly 300 sites on a daily basis. The CDDIS provides easy and ready access to a variety of data sets, products, and information about these data. The specialized nature of the CDDIS lends itself well to enhancement and thus can accommodate diverse data sets and user requirements. This poster paper will present information about the GPS and GLONASS data and products archive at the CDDIS. General information about the system, the computer architecture, archive contents, and future plans, and its support of other international space geodesy services (the ILRS, IVS, and IDS) will be discussed.
The features of the data acquisition and control systems of the NASA Langley Research Center's Jet Noise Laboratory are presented. The Jet Noise Laboratory is a facility that simulates realistic mixed flow turbofan jet engine nozzle exhaust systems in simulated flight. The system is capable of acquiring data for a complete take-off assessment of noise and nozzle performance. This paper describes the development of an integrated system to control and measure the behavior of model jet nozzles featuring dual independent high pressure combusting air streams with wind tunnel flow. The acquisition and control system is capable of simultaneous measurement of forces, moments, static and dynamic model pressures and temperatures, and jet noise. The design concepts for the coordination of the control computers and multiple data acquisition computers and instruments are discussed. The control system design and implementation are explained, describing the features, equipment, and the experiences of using a primarily Personal Computer based system. Areas for future development are examined.
The High Speed Research Airfoil Alloy Program developed a fourth-generation alloy with up to an +85 F increase in creep rupture capability over current production airfoil alloys. Since improved strength is typically obtained when the limits of microstructural stability are exceeded slightly, it is not surprising that this alloy has a tendency to exhibit microstructural instabilities after high temperature exposures. This presentation will discuss recent results obtained on coated fourth-generation alloys for subsonic turbine blade applications under the NASA Ultra-Efficient Engine Technology (UEET) Program. Progress made in reducing microstructural instabilities in these alloys will be presented. In addition, plans will be presented for advanced alloy development and for computational modeling, which will aid future alloy development efforts.
For recently discovered Near-Earth Objects (NEO) two body computations can be used to determine the minimum distance between the object's orbit and that of the Earth. Determinations can then be made for potential near-term threats to the Earth. This preliminary orbit analysis must be followed with planetary perturbation computations of the object's future motion to predict actual close Earth approaches.
GEM-FLO (A Generic Simulation Environment for Modeling Future Launch Operations) is a computer program that facilitates creation of discrete-event simulation models of ground processes in which reusable or expendable launch vehicles (RLVs) are prepared for flight. GEM-FLO includes a component, developed in Visual Basic, that generates a graphical user interface (GUI) and a component, developed in the Arena simulation language, that creates a generic discrete-event simulation model. Through the GUI, GEM-FLO elicits RLV design information from the user. The design information can include information on flight hardware elements, resources, and ground processes. GEM-FLO translates the user s responses into mathematical variables and expressions that populate the generic simulation model. The variables and expressions can represent processing times, resource capacities, status variables, and other process parameters needed to configure a simulation model that reflects the ground processing flow and requirements of a specific RLV. Upon execution of the model, GEMFLO puts out data on many measures of performance, including the flight rate, turnaround time, and utilization of resources. This information can serve as the basis for determining whether design goals can be met, and for comparing characteristics of competing RLV designs