Search NASA⌕ Search

SEARCH · Search NASA

Results for “interface velocity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Analysis of Carbon Nanotube Pull-out from a Polymer Matrix

Molecular dynamics (MD) simulations of carbon nanotube (NT) pull-out from a polymer matrix are carried out. As the NT pull-out develops in the simulation, variations in the displacement and velocities of the NT are monitored. The existence of a carbon-ring-based period in NT sliding during pull-out is identified. Linear trends in the NT velocity-force relation are observed and used to estimate an effective viscosity coefficient for interfacial sliding at the NT/polymer interface. As a result, the entire process of NT pull-out is characterized by an interfacial friction model that is based on a critical pull-out force, and an analog of Newton's friction law used to describe the NT/polymer interfacial sliding.

Frankland, S. J. V.↗

Investigating Morphological Stability of Faceted Interfaces with Axial Heat Processing (AHP) Technique

Successful processing of homogeneous semiconductor single crystals from their melts depends strongly on precise control of thermal and fluid flow conditions near the solid/liquid interface. In this project, we utilize a novel crystal growth technique called Axial Heat Processing (AHP) that uses a baffle, positioned inside the melt near the interface, to supply and/or conduct heat axially to the interface. The baffle, which may or may not have a heater encased in it, can promote more stable and planar growth as well as reduce buoyancy driven convection. The latter is because the baffle reduces the aspect ratio of the melt as it separates the melt into three sections, above the baffle, in the feed gap between the baffle and the crucible wall, and below the baffle between the baffle base and the interface. AHP also enables a close monitoring and/or control of thermal boundaries near the solid/liquid interface during crystal growth by means of thermocouples placed in the baffle. The interface is kept planar when a heating element in the baffle is used. However, a proper choice of melt height is necessary to keep the interface planar when using the baffle without a heater. This study addresses the influence of melt height and growth velocity on the segregation profile of AHP-grown Sb doped Ge single crystals.

Abbaschian, Reza↗

Designing It Smart With SIV

When research staff at NASA s Glenn Research Center developed and patented Stereo Imaging Velocimetry (SIV), the world s first three-dimensional (3-D), full-field quantitative and qualitative analysis tool to investigate flow velocities, experiments that were previously impossible became a reality. Seizing the opportunity to commercialize NASA s breakthrough invention, Digital Interface Systems (DIS), Inc., of North Olmsted, Ohio, acquired an exclusive license to market SIV, which has a range of applications from improving the aerodynamics of aircraft and automobiles to avoiding "no flow" regions in artificial hearts.

Source record↗

Very low surface recombination velocity on p-type c-Si by high-rate plasma-deposited aluminum oxide

Aluminum oxide layers can provide excellent passivation for lowly and highly doped p-type silicon surfaces. Fixed negative charges induce an accumulation layer at the p-type silicon interface, resulting in very effective field-effect passivation. This paper presents highly negatively charged (Q{sub ox}=-2.1x10{sup 12} cm{sup -2}) aluminum oxide layers produced using an inline plasma-enhanced chemical vapor deposition system, leading to very low effective recombination velocities ({approx}10 cm s{sup -1}) on low-resistivity p-type substrates. A minimum static deposition rate (100 nm min{sup -1}) at least one order of magnitude higher than atomic layer deposition was achieved on a large carrier surfaces ({approx}1 m{sup 2}) without significantly reducing the resultant passivation quality.

36 MATERIALS SCIENCE↗

Constrained optimization framework for interface-aware sub-scale dynamics discrete closure model for multimaterial cells in Lagrangian cell-centered hydrodynamics

In this paper, we present the new discrete optimization-based interface-aware sub-scale dynamics (IA-SSD) closure model for multimaterial cells for Lagrangian cell-centered hydrodynamics. For the multimaterial cell, the kinematic and thermodynamic properties (e.g., velocity, density, pressure and internal energy) will typically vary between the materials. The discrete closure model is responsible for an accurate update of the thermodynamic states of the individual material components in the multimaterial cell, and for determining the nodal forces that move the vertices of the cell. The IA-SSD closure model consists of two stages — a bulk stage followed by a sub-scale stage. During the bulk stage, the total change in the volume of the cell, total force applied to the cell, and total work done on the cell are distributed between the materials to update their volume, velocity and total energy. This distribution is performed using volume fractions of the materials. During the second stage, sub-scale interactions of the materials inside the multimaterial cell are taken into account. At this stage, information about the topology of the materials inside the multimaterial cell is used, allowing the orientations of internal interfaces to be included in the model. Each material interacts in a pair-wise fashion with the materials with which it has a common boundary. The interactions are based on the solution of the acoustic Riemann problem between each pair of materials and are limited using physically justified constraints: positivity of volume, positivity of internal energy, and controlled rate of pressure relaxation. To determine the values of the limiter coefficients, a constrained-optimization framework is employed using a quadratic objective function with linear constraints. It is a first-of-its kind application of constrained optimization to develop discrete closure models in a more rigorous fashion. The pair-wise interaction between materials is essentially one dimensional in the direction that is normal to interface. Finally, for this reason, we demonstrate in this paper the performance of our new model on one dimensional numerical examples.

97 MATHEMATICS AND COMPUTING↗

Intergranular Hotspots: A Molecular Dynamics Study on the Influence of Compressive and Shear Work

Numerous crystal- and microstructural-level mechanisms are at play in the formation of hotspots, which are known to govern high explosives initiation behavior. Most of these mechanisms, including pore collapse, interfacial friction, and shear banding, involve both compressive and shear work done within the material and have thus far remained difficult to separate. Here, we assess hotspots formed at shocked crystal–crystal interfaces using quasi-1D molecular dynamics simulations that isolate effects due to compression and shear. Two high explosive materials are considered (TATB and PETN) that exhibit distinctly different levels of molecular conformational flexibility and crystal packing anisotropy. Temperature and intramolecular strain energy localization in the hotspot are assessed through parametric variation of the crystal orientation and two velocity components that respectively modulate compression and shear work. The resulting hotspots are found to be highly localized to a region within 5–20 nm of the crystal–crystal interface. Compressive work plays a considerably larger role in localizing temperature and intramolecular strain energy for both materials and all crystal orientations considered. Shear induces a moderate increase in energy localization relative to unsheared cases only for relatively weak compressive shock pressures of approximately 10 GPa. These results help isolate and rank the relative importance of hotspot generation mechanisms and are anticipated to guide the treatment of crystal–crystal interfaces in coarse-grained models of polycrystalline high-explosive materials.

36 MATERIALS SCIENCE↗

Static and dynamic response of a fluid-fluid interface to electric point and line charge

We consider the behavior of a dielectric fluid-fluid interface in the presence of a strong electric field from a point charge and line charge, respectively, both statically and, in the latter case, dynamically. The fluid surface is elevated above its undisturbed level until balance is reached between the electromagnetic lifting force, gravity and surface tension. We derive ordinary differential equations for the shape of the fluid-fluid interface which are solved numerically with standard means, demonstrating how the elevation depends on field strength and surface tension coefficient. In the dynamic case of a moving line charge, the surface of an inviscid liquid-liquid interface is left to oscillate behind the moving charge after it has been lifted against the force of gravity. We show how the wavelength of the oscillations depends on the relative strength of the forces of gravity and inertia, whereas the amplitude of the oscillations is a nontrivial function of the velocity at which the line charge moves. - Highlights: Black-Right-Pointing-Pointer Fluid surface elevation analyzed near a static point and line charge. Black-Right-Pointing-Pointer Elevation determined by interaction of gravity, dielectric force and surface tension. Black-Right-Pointing-Pointer Dynamic equation of motion for the moving line charge is derived. Black-Right-Pointing-Pointer Surface waves behind moving charge calculated and analysed for different velocities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

OBSERVATIONAL EVIDENCE OF ELECTRON-DRIVEN EVAPORATION IN TWO SOLAR FLARES

We have explored the relationship between hard X-ray (HXR) emissions and Doppler velocities caused by the chromospheric evaporation in two X1.6 class solar flares on 2014 September 10 and October 22, respectively. Both events display double ribbons and the Interface Region Imaging Spectrograph slit is fixed on one of their ribbons from the flare onset. The explosive evaporations are detected in these two flares. The coronal line of Fe xxi 1354.09 Å shows blueshifts, but the chromospheric line of C i 1354.29 Å shows redshifts during the impulsive phase. The chromospheric evaporation tends to appear at the front of the flare ribbon. Both Fe xxi and C i display their Doppler velocities with an “increase-peak-decrease” pattern that is well related to the “rising-maximum-decay” phase of HXR emissions. Such anti-correlation between HXR emissions and Fe xxi Doppler shifts and correlation with C i Doppler shifts indicate the electron-driven evaporation in these two flares.

79 ASTRONOMY AND ASTROPHYSICS↗

Velocity and temperature distributions of coal-slag layers on magnetohydrodynamic generators walls

Approximate analytical expressions are derived for the velocity and temperature distributions in steady state coal slag deposits flowing over MHD generator walls. Effects of slag condensation and Joule heating are included in the analysis. The transport conditions and the slag temperature at the slag-gas interface are taken to be known parameters in the formulation. They are assumed to have been predetermined either experimentally or from the slag properties and the gas dynamic calculations of the free stream flow. The analysis assumes a power law velocity profile for the slag and accounts for the coupling between the energy and momentum conservation equations. Comparisons are made with the more exact numerical solutions to verify the accuracy of the results.

Pian, C. C. P.↗

THE MULTI-PHASE COLD FOUNTAIN IN M82 REVEALED BY A WIDE, SENSITIVE MAP OF THE MOLECULAR INTERSTELLAR MEDIUM

We present a wide area (≈8 × 8 kpc), sensitive map of CO (2–1) emission around the nearby starburst galaxy M82. Molecular gas extends far beyond the stellar disk, including emission associated with the well-known outflow as far as 3 kpc from M82's midplane. Kinematic signatures of the outflow are visible in both the CO and H i emission: both tracers show a minor axis velocity gradient and together they show double peaked profiles, consistent with a hot outflow bounded by a cone made of a mix of atomic and molecular gas. Combining our CO and H i data with observations of the dust continuum, we study the changing properties of the cold outflow as it leaves the disk. While H{sub 2} dominates the ISM near the disk, the dominant phase of the cool medium changes as it leaves the galaxy and becomes mostly atomic after about a kpc. Several arguments suggest that regardless of phase, the mass in the cold outflow does not make it far from the disk; the mass flux through surfaces above the disk appears to decline with a projected scale length of ≈1–2 kpc. The cool material must also end up distributed over a much wider angle than the hot outflow based on the nearly circular isophotes of dust and CO at low intensity and the declining rotation velocities as a function of height from the plane. The minor axis of M82 appears so striking at many wavelengths because the interface between the hot wind cavity and the cool gas produces Hα, hot dust, polycyclic aromatic hydrocarbon emission, and scattered UV light. We also show the level at which a face-on version of M82 would be detectable as an outflow based on unresolved spectroscopy. Finally, we consider multiple constraints on the CO-to-H{sub 2} conversion factor, which must change across the galaxy but appears to be only a factor of ≈2 lower than the Galactic value in the outflow.

79 ASTRONOMY AND ASTROPHYSICS↗

Development of a One-Domain Volume-Averaged Navier–Stokes Solver

The interaction between a high-enthalpy flow and a thermal protection material is inherently multiscale and multiphysics. In conventional aerothermal analyses, the external flow and material response are generally modeled using separate computational domains coupled through boundary conditions at the material surface. Although this approach has supported many practical applications, it requires assumptions about the location and behavior of the interface and may become difficult to apply when material decomposition, internal reactions, and surface recession substantially alter the porous structure. This report presents the development of a one-domain formulation in which the free-fluid and porous-material regions are represented within a single computational domain. The formulation is based on the volume-averaged Navier–Stokes (VANS) equations, derived from the governing equations for reacting, compressible flow and condensed material. Volume averaging transfers the influence of the unresolved material microstructure to the macroscale equations through effective transport properties, interfacial source terms, and dispersion fluxes. Particular attention is given to regions in which porosity and permeability vary rapidly, including the diffuse transition between a porous material and the surrounding fluid. The resulting equations are implemented in the Porous-material Analysis Toolbox based on OpenFOAM (PATO). The report describes the pressure–velocity coupling strategy used by the solver, examines spatial filtering techniques for deriving effective properties, and evaluates the influence of a smoothly varying interface permeability. Numerical demonstrations include canonical porous-flow configurations, a flow-tube configuration representative of FiberForm® permeability experiments, and the oxidation of a porous carbon material. The purpose of this work is to establish a mathematical and computational foundation for a unified treatment of flow and thermal protection material response. The present formulation is intended to support the progressive inclusion of additional physical processes, including multicomponent transport, finite-rate gas–surface chemistry, pyrolysis, internal oxidation, and material recession. It also provides a framework for connecting pore-scale simulations and microstructural characterization with macroscale aerothermal-response calculations. This report is intended for researchers and engineers working in computational fluid dynamics, porous-media transport, material response, and thermal protection system modeling. It documents both the theoretical development and the initial numerical assessment of the one-domain approach, while identifying the closure of effective and dispersion terms as an important subject for continued investigation.

Ablation↗

Reduced recombination via tunable surface fields in perovskite thin films

Here, the ability to reduce energy loss at semiconductor surfaces through passivation or surface field engineering is an essential step in the manufacturing of efficient photovoltaic (PV) and optoelectronic devices. Similarly, surface modification of emerging halide perovskites with quasi-two-dimensional (2D) heterostructures is now ubiquitous to achieve PV power conversion efficiencies (PCEs) >25%, yet a fundamental understanding to how these treatments function is still generally lacking. Here we use a unique combination of depth-sensitive nanoscale characterization techniques to uncover a tunable passivation strategy and mechanism found in perovskite PV devices that were the first to reach the >25% PCE milestone. Namely, treatment with hexylammonium bromide leads to the simultaneous formation of an iodide-rich 2D layer along with a Br halide gradient that extends from defective surfaces and grain boundaries into the bulk three-dimensional (3D) layer. This interface can be optimized to extend the charge carrier lifetime to record values >30 μs and to reduce interfacial recombination velocities to values as low as <7 cm s −1 .

Devices for energy harvesting↗

Influence of deposition temperature of thermal ALD deposited Al{sub 2}O{sub 3} films on silicon surface passivation

The effect of deposition temperature (T{sub dep}) and subsequent annealing time (t{sub anl}) of atomic layer deposited aluminum oxide (Al{sub 2}O3) films on silicon surface passivation (in terms of surface recombination velocity, SRV) is investigated. The pristine samples (as-deposited) show presence of positive fixed charges, Q{sub F}. The interface defect density (D{sub it}) decreases with increase in T{sub dep} which further decreases with t{sub anl} up to 100s. An effective surface passivation (SRV<8 cm/s) is realized for T{sub dep} ≥ 200 °C. The present investigation suggests that low thermal budget processing provides the same quality of passivation as realized by high thermal budget process (t{sub anl} between 10 to 30 min)

36 MATERIALS SCIENCE↗

The Development and Production of a Functionally Graded Composite for Pb-Bi Service

A material that resists lead-bismuth eutectic (LBE) attack and retains its strength at 700°C would be an enabling technology for LBE-cooled reactors. No single alloy currently exists that can economically meet the required performance criteria of high strength and corrosion resistance. A Functionally Graded Composite (FGC) was developed with layers engineered to perform these functions. F91 was chosen as the structural layer of the composite for its strength and radiation resistance. Fe-12Cr-2Si, an alloy developed from previous work in the Fe-Cr-Si system, was chosen as the corrosion-resistant cladding layer because of its chemical similarity to F91 and its superior corrosion resistance in both oxidizing and reducing environments. Fe-12Cr-2Si experienced minimal corrosion due to its self-passivation in oxidizing and reducing environments. Extrapolated corrosion rates are below one micron per year at 700ï°C. Corrosion of F91 was faster, but predictable and manageable. Diffusion studies showed that 17 microns of the cladding layer will be diffusionally diluted during the three year life of fuel cladding. 33 microns must be accounted for during the sixty year life of coolant piping. 5 cm coolant piping and 6.35 mm fuel cladding preforms were produced on a commercial scale by weld-overlaying Fe-12Cr-2Si onto F91 billets and co-extruding them. An ASME certified weld was performed followed by the prescribed quench-and-tempering heat treatment for F91. A minimal heat affected zone was observed, demonstrating field weldability. Finally, corrosion tests were performed on the fabricated FGC at 700ï°C after completely breaching the cladding in a small area to induce galvanic corrosion at the interface. None was observed. This FGC has significant impacts on LBE reactor design. The increases in outlet temperature and coolant velocity allow a large increase in power density, leading to either a smaller core for the same power rating or more power output for the same size core. This FGC represents an enabling technology for LBE cooled fast reactors.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Fan Loops Observed by IRIS, EIS, and AIA

A comprehensive study of the physical parameters of active region fan loops is presented using the observations recorded with the Interface Region Imaging Spectrometer (IRIS), the EUV Imaging Spectrometer (EIS) on board Hinode, and the Atmospheric Imaging Assembly (AIA) and the Helioseismic and Magnetic Imager (HMI) on board the Solar Dynamics Observatory (SDO). The fan loops emerging from non-flaring AR 11899 (near the disk center) on 2013 November 19 are clearly discernible in AIA 171 Å images and in those obtained in Fe viii and Si vii images using EIS. Our measurements of electron densities reveal that the footpoints of these loops are at an approximately constant pressure with electron densities of log N{sub e}=10.1 cm{sup −3} at log [T/K]=5.15 (O iv), and log N{sub e}=8.9 cm{sup −3} at log [T/K]=6.15 (Si x). The electron temperature diagnosed across the fan loops by means of EM-Loci suggest that two temperature components exist at log [T/K]=4.95 and 5.95 at the footpoints. These components are picked up by IRIS lines and EIS lines, respectively. At higher heights, the loops are nearly isothermal at log [T/K]=5.95, which remained constant along the loop. The measurement of the Doppler shift using IRIS lines suggests that the plasma at the footpoints of these loops is predominantly redshifted by 2–3 km s{sup −1} in C ii, 10–15 km s{sup −1} in Si iv, and 15–20 km s{sup −1} in O iv, reflecting the increase in the speed of downflows with increasing temperature from log [T/K]=4.40 to 5.15. These observations can be explained by low-frequency nanoflares or impulsive heating, and provide further important constraints on the modeling of the dynamics of fan loops.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE CONNECTION BETWEEN PROPAGATING SOLAR CORONAL DISTURBANCES AND CHROMOSPHERIC FOOTPOINTS

The Interface Region Imaging Spectrograph ( IRIS ) provides an unparalleled opportunity to explore the (thermal) interface between the chromosphere, transition region, and the coronal plasma observed by the Atmospheric Imaging Assembly (AIA) of the Solar Dynamics Observatory ( SDO ). The SDO /AIA observations of coronal loop footpoints show strong recurring upward propagating signals—“propagating coronal disturbances” (PCDs) with apparent speeds of the order of 100–120 km s{sup −1}. That signal has a clear signature in the slit-jaw images of IRIS in addition to identifiable spectral signatures and diagnostics in the Mg iih (2803 Å) line. In analyzing the Mg iih line, we are able to observe the presence of magnetoacoustic shock waves that are also present in the vicinity of the coronal loop footpoints. We see there is enough of a correspondence between the shock propagation in Mg iih, the evolution of the Si iv line profiles, and the PCD evolution to indicate that these waves are an important ingredient for PCDs. In addition, the strong flows in the jet-like features in the IRIS Si iv slit-jaw images are also associated with PCDs, such that waves and flows both appear to be contributing to the signals observed at the footpoints of PCDs.

79 ASTRONOMY AND ASTROPHYSICS↗

Direct laser initiation of insensitive explosives.

Instantaneous longitudinal detonations have been observed in confined columns of PETN, RDX, and tetryl when pulsed with light energy from a focused Q-switched ruby laser. The laser energy ranged from 0.5 to 4.2 J with a pulse width of 25 nsec. Enhancement of the ignition mechanism is hypothesized when a 1000 A thick aluminum film is vacuum deposited on the explosive side of the window. Upon irradiation from the laser, a shock is generated at the aluminum-explosive interface. Steady-state detonations can be reached in less than 0.5 microsec with less than 10% variation in detonation velocity for PETN and RDX.

Menichelli, V. J.↗

Ultrasonic attenuation and velocity in AS/3501-6 graphite/epoxy fiber composite

The ultrasonic group velocity and attenuation were measured as a function of frequency for longitudinal and shear waves in the epoxy matrix (3501-6) and in the principal directions of the unidirectional graphite/epoxy composite (AS/3501-6). Tests were conducted in the frequency ranges 0.25 Mz to 14 MHz and 0.5 Mz to 3 MHz for longitudinal and shear wave modes, respectively. The attenuation increased with frequency for all wave modes, but the group velocity was independent of frequency for all wave modes. The effects of pressure and couplant at the transducer-specimen interface were studied and it was found that for each transducer type there exists a frequency dependent 'saturation pressure' corresponding to the maximum output signal amplitude.

Williams, J. H., Jr.↗