Search NASA⌕ Search

SEARCH · Search NASA

Results for “network”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Data communication network at the ASRM facility

This three-year project (February 1991 to February 1994) has involved analyzing and helping to design the communication network for the Advanced Solid Rocket Motor (ASRM) facility at Yellow Creek, near Iuka, MS. The principal concerns in the analysis were the bandwidth (both on average and in the worst case) and the expandability of the network. As the communication network was designed and modified, a careful evaluation of the bandwidth of the network, the capabilities of the protocol, and the requirements of the controllers and computers on the network was required. The overall network, which was heterogeneous in protocol and bandwidth, needed to be modeled, analyzed, and simulated to obtain some degree of confidence in its performance capabilities and in its performance under nominal and heavy loads. The results of our analysis did have an impact on the design and operation of the ASRM facility. During 1993 we analyzed many configurations of this basic network structure. The analyses are described in detail in Section 2 and 3 herein. Section 2 reports on an analysis of the whole network. The preliminary results of that research indicated that the most likely bottleneck as the network traffic increased would be the hubs. Thus a study of Cabletron hubs was initiated. The results of that study are in Section 3. Section 4 herein reports on the final network configuration analyzed. When the ASRM facility was mothballed in December of 1993, this was basically the planned and partially installed network. A briefing was held at NASA/MSFC on December 7, 1993, at which time our final analysis and conclusions were disseminated. This report contains a written record of most of the information disseminated at that briefing.

Moorhead, Robert J., III↗

Prediction of Aerodynamic Coefficient using Genetic Algorithm Optimized Neural Network for Sparse Data

Wind tunnels use scale models to characterize aerodynamic coefficients, Wind tunnel testing can be slow and costly due to high personnel overhead and intensive power utilization. Although manual curve fitting can be done, it is highly efficient to use a neural network to define the complex relationship between variables. Numerical simulation of complex vehicles on the wide range of conditions required for flight simulation requires static and dynamic data. Static data at low Mach numbers and angles of attack may be obtained with simpler Euler codes. Static data of stalled vehicles where zones of flow separation are usually present at higher angles of attack require Navier-Stokes simulations which are costly due to the large processing time required to attain convergence. Preliminary dynamic data may be obtained with simpler methods based on correlations and vortex methods; however, accurate prediction of the dynamic coefficients requires complex and costly numerical simulations. A reliable and fast method of predicting complex aerodynamic coefficients for flight simulation I'S presented using a neural network. The training data for the neural network are derived from numerical simulations and wind-tunnel experiments. The aerodynamic coefficients are modeled as functions of the flow characteristics and the control surfaces of the vehicle. The basic coefficients of lift, drag and pitching moment are expressed as functions of angles of attack and Mach number. The modeled and training aerodynamic coefficients show good agreement. This method shows excellent potential for rapid development of aerodynamic models for flight simulation. Genetic Algorithms (GA) are used to optimize a previously built Artificial Neural Network (ANN) that reliably predicts aerodynamic coefficients. Results indicate that the GA provided an efficient method of optimizing the ANN model to predict aerodynamic coefficients. The reliability of the ANN using the GA includes prediction of aerodynamic coefficients to an accuracy of 110% . In our problem, we would like to get an optimized neural network architecture and minimum data set. This has been accomplished within 500 training cycles of a neural network. After removing training pairs (outliers), the GA has produced much better results. The neural network constructed is a feed forward neural network with a back propagation learning mechanism. The main goal has been to free the network design process from constraints of human biases, and to discover better forms of neural network architectures. The automation of the network architecture search by genetic algorithms seems to have been the best way to achieve this goal.

Rajkumar, T.↗

Scale-Free Networks and Commercial Air Carrier Transportation in the United States

Network science, or the art of describing system structure, may be useful for the analysis and control of large, complex systems. For example, networks exhibiting scale-free structure have been found to be particularly well suited to deal with environmental uncertainty and large demand growth. The National Airspace System may be, at least in part, a scalable network. In fact, the hub-and-spoke structure of the commercial segment of the NAS is an often-cited example of an existing scale-free network After reviewing the nature and attributes of scale-free networks, this assertion is put to the test: is commercial air carrier transportation in the United States well explained by this model? If so, are the positive attributes of these networks, e.g. those of efficiency, flexibility and robustness, fully realized, or could we effect substantial improvement? This paper first outlines attributes of various network types, then looks more closely at the common carrier air transportation network from perspectives of the traveler, the airlines, and Air Traffic Control (ATC). Network models are applied within each paradigm, including discussion of implied strengths and weaknesses of each model. Finally, known limitations of scalable networks are discussed. With an eye towards NAS operations, utilizing the strengths and avoiding the weaknesses of scale-free networks are addressed.

Conway, Sheila R.↗

Unified Lunar Control Network 2005 and Topographic Model

There are currently two generally accepted lunar control networks. These are the Unified Lunar Control Network (ULCN) and the Clementine Lunar Control Network (CLCN), both derived by M. Davies and T. Colvin at RAND. We address here our efforts to merge and improve these networks into a new ULCN. The ULCN was described in the last major publication about a lunar control network. The statistics on this and the other networks discussed here. Images for this network are from the Apollo, Mariner 10, and Galileo missions, and Earth-based photographs. The importance of this network is that its accuracy is relatively well quantified and published information on the network is available. The CLCN includes measurements on 43,871 Clementine 750-nm images - the largest planetary control network ever computed. This purpose of this network was to determine the geometry for the Clementine Basemap Mosiac (CBM). The geometry of that mosaic was used to produce the Clementine UVVIS digital image model and the Near-Infrared Global Multispectral Map of the Moon from Clementine. Through the extensive use of these products, they and the underlying CLCN in effect define the generally accepted current coordinate system for reporting and describing the location of lunar coordinates. However, no publication describes the CLCN itself.

Archinal, B. A.↗

Integrated Network Architecture for NASA's Orion Missions

NASA is planning a series of short and long duration human and robotic missions to explore the Moon and then Mars. The series of missions will begin with a new crew exploration vehicle (called Orion) that will initially provide crew exchange and cargo supply support to the International Space Station (ISS) and then become a human conveyance for travel to the Moon. The Orion vehicle will be mounted atop the Ares I launch vehicle for a series of pre-launch tests and then launched and inserted into low Earth orbit (LEO) for crew exchange missions to the ISS. The Orion and Ares I comprise the initial vehicles in the Constellation system of systems that later includes Ares V, Earth departure stage, lunar lander, and other lunar surface systems for the lunar exploration missions. These key systems will enable the lunar surface exploration missions to be initiated in 2018. The complexity of the Constellation system of systems and missions will require a communication and navigation infrastructure to provide low and high rate forward and return communication services, tracking services, and ground network services. The infrastructure must provide robust, reliable, safe, sustainable, and autonomous operations at minimum cost while maximizing the exploration capabilities and science return. The infrastructure will be based on a network of networks architecture that will integrate NASA legacy communication, modified elements, and navigation systems. New networks will be added to extend communication, navigation, and timing services for the Moon missions. Internet protocol (IP) and network management systems within the networks will enable interoperability throughout the Constellation system of systems. An integrated network architecture has developed based on the emerging Constellation requirements for Orion missions. The architecture, as presented in this paper, addresses the early Orion missions to the ISS with communication, navigation, and network services over five phases of a mission: pre-launch, launch from T0 to T+6.5 min, launch from T+6.5 min to 12 min, in LEO for rendezvous and docking with ISS, and return to Earth. The network of networks that supports the mission during each of these phases and the concepts of operations during those phases are developed as a high level operational concepts graphic called OV-1, an architecture diagram type described in the Department of Defense Architecture Framework (DoDAF). Additional operational views on organizational relationships (OV-4), operational activities (OV-5), and operational node connectivity (OV-2) are also discussed. The system interfaces view (SV-1) that provides the communication and navigation services to Orion is also included and described. The challenges of architecting integrated network architecture for the NASA Orion missions are highlighted.

Bhasin, Kul B.↗

Evolution of the Lunar Network

The National Aeronautics and Space Administration (NASA) is planning to upgrade its network Infrastructure to support missions for the 21st century. The first step is to increase the data rate provided to science missions to at least the 100 megabits per second (Mbps) range. This is under way, using Ka-band 26 Gigahertz (GHz), erecting an 18-meter antenna for the Lunar Reconnaissance Orbiter (LRO), and the planned upgrade of the Deep Space Network (DSN) 34-meter network to support the James Webb Space Telescope (JWST). The next step is the support of manned missions to the Moon and beyond. Establishing an outpost with several activities such as rovers, colonization, and observatories, is better achieved by using a network configuration rather than the current method of point-to-point communication. Another challenge associated with the Moon is communication coverage with the Earth. The Moon's South Pole, targeted for human habitat and exploration, is obscured from Earth view for half of the 28-day lunar cycle and requires the use of lunar relay satellites to provide coverage when there is no direct view of the Earth. The future NASA and Constellation network architecture is described in the Space Communications Architecture Working Group (SCAWG) Report. The Space Communications and Navigation (SCAN) Constellation Integration Project (SCIP) is responsible for coordinating Constellation requirements and has assigned the responsibility for implementing these requirements to the existing NASA communication providers: DSN, Space Network (SN), Ground Network (GN) and the NASA Integrated Services Network (NISN). The SCAWG Report provides a future architecture but does not provide implementation details. The architecture calls for a Netcentric system, using hundreds of 12-meter antennas, a ground antenna array, and a relay network around the Moon. The report did not use cost as a variable in determining the feasibility of this approach. As part of the SCIP Mission Concept Review and the second iteration of the Lunar Architecture Team (LAT), the focus is on cost, as well as communication coverage using operational scenarios. This approach maximizes use of existing assets and adds capability in small increments. This paper addresses architecture decisions such as the Radio Frequency (RF) signal and network (Netcentric) decisions that need to be made and the difficulty of implementing them into the existing Space Network and DSN. It discusses the evolution of the lunar system and describes its components: Tracking and Data Relay Satellite System (TDRSS), Earth-based ground stations, Lunar Relay, and surface systems.

Gal-Edd, Jonathan↗

Cascade Back-Propagation Learning in Neural Networks

The cascade back-propagation (CBP) algorithm is the basis of a conceptual design for accelerating learning in artificial neural networks. The neural networks would be implemented as analog very-large-scale integrated (VLSI) circuits, and circuits to implement the CBP algorithm would be fabricated on the same VLSI circuit chips with the neural networks. Heretofore, artificial neural networks have learned slowly because it has been necessary to train them via software, for lack of a good on-chip learning technique. The CBP algorithm is an on-chip technique that provides for continuous learning in real time. Artificial neural networks are trained by example: A network is presented with training inputs for which the correct outputs are known, and the algorithm strives to adjust the weights of synaptic connections in the network to make the actual outputs approach the correct outputs. The input data are generally divided into three parts. Two of the parts, called the "training" and "cross-validation" sets, respectively, must be such that the corresponding input/output pairs are known. During training, the cross-validation set enables verification of the status of the input-to-output transformation learned by the network to avoid over-learning. The third part of the data, termed the "test" set, consists of the inputs that are required to be transformed into outputs; this set may or may not include the training set and/or the cross-validation set. Proposed neural-network circuitry for on-chip learning would be divided into two distinct networks; one for training and one for validation. Both networks would share the same synaptic weights.

Duong, Tuan A.↗

Applying a Space-Based Security Recovery Scheme for Critical Homeland Security Cyberinfrastructure Utilizing the NASA Tracking and Data Relay (TDRS) Based Space Network

Protection of the national infrastructure is a high priority for cybersecurity of the homeland. Critical infrastructure such as the national power grid, commercial financial networks, and communications networks have been successfully invaded and re-invaded from foreign and domestic attackers. The ability to re-establish authentication and confidentiality of the network participants via secure channels that have not been compromised would be an important countermeasure to compromise of our critical network infrastructure. This paper describes a concept of operations by which the NASA Tracking and Data Relay (TDRS) constellation of spacecraft in conjunction with the White Sands Complex (WSC) Ground Station host a security recovery system for re-establishing secure network communications in the event of a national or regional cyberattack. Users would perform security and network restoral functions via a Broadcast Satellite Service (BSS) from the TDRS constellation. The BSS enrollment only requires that each network location have a receive antenna and satellite receiver. This would be no more complex than setting up a DIRECTTV-like receiver at each network location with separate network connectivity. A GEO BSS would allow a mass re-enrollment of network nodes (up to nationwide) simultaneously depending upon downlink characteristics. This paper details the spectrum requirements, link budget, notional assets and communications requirements for the scheme. It describes the architecture of such a system and the manner in which it leverages off of the existing secure infrastructure which is already in place and managed by the NASAGSFC Space Network Project.

Cybersecurity↗

Security-Enhanced Autonomous Network Management

Ensuring reliable communication in next-generation space networks requires a novel network management system to support greater levels of autonomy and greater awareness of the environment and assets. Intelligent Automation, Inc., has developed a security-enhanced autonomous network management (SEANM) approach for space networks through cross-layer negotiation and network monitoring, analysis, and adaptation. The underlying technology is bundle-based delay/disruption-tolerant networking (DTN). The SEANM scheme allows a system to adaptively reconfigure its network elements based on awareness of network conditions, policies, and mission requirements. Although SEANM is generically applicable to any radio network, for validation purposes it has been prototyped and evaluated on two specific networks: a commercial off-the-shelf hardware test-bed using Institute of Electrical Engineers (IEEE) 802.11 Wi-Fi devices and a military hardware test-bed using AN/PRC-154 Rifleman Radio platforms. Testing has demonstrated that SEANM provides autonomous network management resulting in reliable communications in delay/disruptive-prone environments.

Zeng, Hui↗

Ensuring Flexibility and Security in SDN-Based Spacecraft Communication Networks Through Risk Assessment

Software-defined networking (SDN) has enabled elastic networking and resource distribution in cloud computing. The centralization and separation of the Control Plane also offers a high degree of network configurability and management, which can be used to mitigate and manage threats to the network. Space communication networks have historically been restricted and circuit switching in these networks has been a manual process. This study evaluates the potential role of SDN in space communication networks from a networking security standpoint. The evaluation covers the networking security needs of spacecraft missions and their associated assets. The results from the evaluation lead to a risk assessment that identifies vulnerabilities in an SDN-based communications architecture. Security challenges introduced into the network from integrating SDN are also considered. A risk register summarizes the severity of the attack outcomes, as well as occurrence likelihood. The study identifies Denial-of-Service (DoS) attacks as a new threat (presently unmitigated by existing security controls) that would be prevalent in an SDN-based space communication environment. A Mininet-based emulation testbed is built to demonstrate the susceptibility of spacecraft flight software to a flooding DoS attack when on an interconnected SDN-managed network. This type of attack would be highly consequential to mission assets, and therefore SDN-based space communications would need to be resilient to such attacks. Future work will need to be performed to fully characterize DoS attack methods that can apply to the space communication scenario, as well as to devise a comprehensive DoS-resilient solution.

Baker, Dylan Z.↗

Distributed Quantum Processing via Integrated Regional Quantum Networks Using Free-Space Optical Links

The landscape for quantum computing is rapidly evolving with the development of quantum computers and the emergence of future science enabling applications being pursued in many areas, such as distributed quantum computing, hybrid computing scenarios that require cooperatively networked quantum and classical computing assets and more. Quantum networking is also advancing with multiple regional quantum networks and testbeds maturing across the nation. These quantum networking testbeds typically include multiple access points with a heterogeneous mixture of capabilities interconnected by fiber spanning anywhere from tens to hundreds of kilometers; many such networks incorporate a classical networking framework. Alongside these connectivity advancements in the infrastructure, there is quantum sensing device and component technology maturation that is serving to expand the body of quantum networking scenarios that are presently possible and redefining the quantum- enabled future. Bridging the present collective progress in quantum computing and quantum networking will enable the next era of purposeful advancements for national priority use-cases for the benefit of science. One such use-case is enabling future quantum computing applications via integrated regional quantum networking infrastructure in neighboring locations like New York and Maryland, both states are home to robust classical and quantum networking capabilities. To enable near-term distributed quantum computing applications via the practical integration of regional quantum networking infrastructure, free-space optical links via satellite communications will be essential to avoid the exponential loss commonly observed with fiber implementations. There is both an urgent need and a practical justification for pursuing such space-based integration scope now.

Harry Shaw↗

Silicon-embedded copper nanostructure network for high energy storage

Provided herein are nanostructure networks having high energy storage, electrochemically active electrode materials including nanostructure networks having high energy storage, as well as electrodes and batteries including the nanostructure networks having high energy storage. According to various implementations, the nanostructure networks have high energy density as well as long cycle life. In some implementations, the nanostructure networks include a conductive network embedded with electrochemically active material. In some implementations, silicon is used as the electrochemically active material. The conductive network may be a metal network such as a copper nanostructure network. Methods of manufacturing the nanostructure networks and electrodes are provided. In some implementations, metal nanostructures can be synthesized in a solution that contains silicon powder to make a composite network structure that contains both. The metal nanostructure growth can nucleate in solution and on silicon nanostructure surfaces.

25 ENERGY STORAGE↗

Silicon-embedded copper nanostructure network for high energy storage

Provided herein are nanostructure networks having high energy storage, electrochemically active electrode materials including nanostructure networks having high energy storage, as well as electrodes and batteries including the nanostructure networks having high energy storage. According to various implementations, the nanostructure networks have high energy density as well as long cycle life. In some implementations, the nanostructure networks include a conductive network embedded with electrochemically active material. In some implementations, silicon is used as the electrochemically active material. The conductive network may be a metal network such as a copper nanostructure network. Methods of manufacturing the nanostructure networks and electrodes are provided. In some implementations, metal nanostructures can be synthesized in a solution that contains silicon powder to make a composite network structure that contains both. The metal nanostructure growth can nucleate in solution and on silicon nanostructure surfaces.

25 ENERGY STORAGE↗

Democratizing Network Reservations through Application-Aware Orchestration

The provisioning of network connections for data transfers that provide quality of service (QoS) over research and education (R&E) networks is currently performed by network operators. For network connections that span multiple administrative domains, network operators have to reach agreements on reservation requirements. As a result, a network reservation request may take from days to weeks to be provisioned. To improve provisioning times and the success rate of multidomain network reservations, we designed and implemented an application-aware orchestration framework for multidomain R&E networks. This framework leverages latest developments in software-defined networking to automate network provisioning in order to democratize access to network reservation through novel APIs. We present the design, implementation, and evaluation of our application-aware orchestration framework. We evaluate our system using Mininet and demonstrate that it provisions 49% more reservations than current state-of-the-art systems within seconds of receiving a request.

Rao, Nageswara S.↗

Internet protocol network mapper

A system for identifying IP ranges having a network address and a network address mask is provided. The system generates a collection of IP ranges. For each unique network address as defined by a maximum network address mask within provided IP addresses, the system adds to the collection an IP range for that unique network address. The added IP range may be defined by the unique network address and a network address mask that is set to the maximum network address mask. The system identifies groups of IP ranges of the collection to be represented by a combined IP range with a combined network address mask. For each group of IP ranges, the system removes from the collection the IP ranges within the group and adds to the collection the combined IP range with a network address and the combined network address mask.

Youd, David W.↗

Intelligent network slicing and policy-based routing engine

One or more aspects of the present disclosure are directed to network optimization solutions provided as software agents (applications) executed on network nodes in a heterogenous multi-vendor environment to provide cross-layer network optimization and ensure availability of network resources to meet associated Quality of Experience (QoE) and Quality of Service (QoS). In one aspect, a network slicing engine is configured to receive at least one request from at least one network endpoint for access to the heterogeneous multi-vendor network for data transmission; receive information on state of operation of a plurality of communication links between the plurality of nodes; determine a set of data transmission routes for the request; assign a network slice for serving the request; determine, from the set of data transmission routes, an end-to-end route for the network slice; and send network traffic associated with the request using the network slice and over the end-to-end route.

Mody, Apurva N.↗

Estimation of Commodity Origin-Destination Matrices and Flows: The Network Tomography of U.S. Wheat Shipments

This study proceeds from the belief that an examination of railroads and railcar flows provides important insights into economic geography and to the economics of transportation. The flows of wheat in the United States are examined using rail carload waybill survey data in order to model the network routes likely taken from origin to destination, a characterization of the flows themselves, and modeling the flows through the comparison of standard gravity models with two relatively new gravity estimation methodologies suggested in the network analysis literature. The analysis covers Wheat flows through the U.S. for the years 2013 through 2015. Rail flows are highly conducive to the emergence of high volume corridors, a primary hypothetical relationship described by Taaffe, Morrill and Gould (1963). Hubs are expected to develop in market centers with sufficient traffic, as in a Christaller (1966) system, where market centers above a certain size have terminal facilities, or serve as primary interchange points. Centers of different sizes may also have more than one load center thereby concentrating and attracting more flows (o’Kelly, 1998). Implications are for commodity production and processing locations to develop concentrations of flows and the development of identifiable commodity-specific components of the national rail network. As the railroad nodes are structured in relation to the railroad network, the origin and destination nodes take the form of an irregular lattice (Besag 1974). One implication of this irregular lattice network is the probable presence of network autocorrelation in the flows: the constraints of network connectivity assure flows are not open between the terminals, but travel to and from distinct neighbors on the network. In addition, the network terminal structure can be expected to follow a hierarchical central place ordering. Evidence of such an ordering may be determined by examining the clustering and concentration of flows at nodes and, by association, particular network links serving those nodes (Fujita and Thisse 2002; Hesse and Rodrigue 2004; Nierat 1997). The presence of hierarchies implies economies of scale are being realized which leads to a centralizing or agglomerating effect (Fujita and Thisse, 2002 and Brakman et al, 2001). Thus the transportation sector will also develop an associated central place hierarchy with its own associated network of flows and flow concentrations.

Peterson, Steven↗

Anomaly analysis and visualization for dynamic networks through spatiotemporal graph segmentations

With recent technology advance in Internet of Things (IoT) that involves human, sensors, and mobile devices, networks are not only growing much larger but more complex and dynamic in nature. The spatiotemporal dynamics of networks are represented by both topological changes and temporal shifts of attribute information associated with network components. Understanding the pattern and trend of dynamic networks is increasingly important. While data mining approaches are generally useful in analyzing the statistical properties of networks, there has been recent trend to consider bringing human into the loop, and to examine how feedback from visualizations of large-scale dynamic networks can further improve data mining and machine learning. Traditional visualization methods based on animation and sequences of snapshot graphs are also limited by human cognitive capability. Here, we present a dynamic network analysis and visualization (DNAV) tool which explores the spatiotemporal dimensions of graph components. In particular, nodes and edges are augmented with spatiotemporal segmentation based on both topological and attribute dynamics (e.g., time and locations of connectivity). To further facilitate analysis of large dynamic networks, DNAV includes statistical dynamic overviews alongside graph views, as well as data filtering modules for scalable analysis. Using case studies on public datasets, we demonstrate the effectiveness of DNAV in understanding and analyzing anomalies in dynamic networks such as computer communication networks.

97 MATHEMATICS AND COMPUTING↗