Search NASA⌕ Search

SEARCH · Search NASA

Results for “process control and optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Nanostructured materials for rechargeable batteries: synthesis, fundamental understanding and limitations

Nanostructured materials have emerged as very attrcative electrode materials for energy storage due to their small sizes and structure/morphology related properties. The purpose of this article to discuss the opportunities and challenges of nanostructured materials for advanced energy storage devices. Nanostructured silicon (Si) anodes together with other cathode and anode materials are used as examples to illustrate the different methods available for synthesis and the range of materials that can be produced to improve the storage capacity and stability. Recent progresses in using well-defined nanostructures to gain new fundamental understanding of the complex electrochemical reactions and charge-discharge processes are also discussed. Finally, the paper addresses some key problems that are yet to be solved and the need to optimize the microstructures and control the high level architectures beyond nanoscale.

energy storage↗

Optimization of magnetic switches for single particle and cell transport

The ability to manipulate an ensemble of single particles and cells is a key aim of lab-on-a-chip research; however, the control mechanisms must be optimized for minimal power consumption to enable future large-scale implementation. Recently, we demonstrated a matter transport platform, which uses overlaid patterns of magnetic films and metallic current lines to control magnetic particles and magnetic-nanoparticle-labeled cells; however, we have made no prior attempts to optimize the device geometry and power consumption. Here, we provide an optimization analysis of particle-switching devices based on stochastic variation in the particle's size and magnetic content. These results are immediately applicable to the design of robust, multiplexed platforms capable of transporting, sorting, and storing single cells in large arrays with low power and high efficiency.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

SARS-CoV-2 wastewater variant surveillance: pandemic response leveraging FDA’s GenomeTrakr network

ABSTRACT Wastewater surveillance has emerged as a crucial public health tool for population-level pathogen surveillance. Supported by funding from the American Rescue Plan Act of 2021, the FDA‘s genomic epidemiology program, GenomeTrakr, was leveraged to sequence SARS-CoV-2 from wastewater sites across the United States. This initiative required the evaluation, optimization, development, and publication of new methods and analytical tools spanning sample collection through variant analyses. Version-controlled protocols for each step of the process were developed and published on protocols.io. A custom data analysis tool and a publicly accessible dashboard were built to facilitate real-time visualization of the collected data, focusing on the relative abundance of SARS-CoV-2 variants and sub-lineages across different samples and sites throughout the project. From September 2021 through June 2023, a total of 3,389 wastewater samples were collected, with 2,517 undergoing sequencing and submission to NCBI under the umbrella BioProject,PRJNA757291. Sequence data were released with explicit quality control (QC) tags on all sequence records, communicating our confidence in the quality of data. Variant analysis revealed wide circulation of Delta in the fall of 2021 and captured the sweep of Omicron and subsequent diversification of this lineage through the end of the sampling period. This project successfully achieved two important goals for the FDA’s GenomeTrakr program: first, contributing timely genomic data for the SARS-CoV-2 pandemic response, and second, establishing both capacity and best practices for culture-independent, population-level environmental surveillance for other pathogens of interest to the FDA. IMPORTANCE This paper serves two primary objectives. First, it summarizes the genomic and contextual data collected during a Covid-19 pandemic response project, which utilized the FDA’s laboratory network, traditionally employed for sequencing foodborne pathogens, for sequencing SARS-CoV-2 from wastewater samples. Second, it outlines best practices for gathering and organizing population-level next generation sequencing (NGS) data collected for culture-free, surveillance of pathogens sourced from environmental samples.

Microbiology↗

Study on Intelligent Compaction-Equipment Logistics Scheduling and Propagation Characteristics of Vibration Wave in Nonlinear Systems with Multistability Based on Field Test

The equipment scheduling and propagation characteristics of vibration wave from vibratory roller ⟶ filling material nonlinear systems with multistability are the core problems of subgrade intelligent construction technology, and the logistics scheduling of the equipment is directly related to the construction efficiency. Aiming at the shortages, one typical subgrade located at the Gu’an station of Beijing-Xiong’an city railway is selected to research and finish the field tests; some findings are shown as follows: first, some valuable suggestions about the logistics scheduling of intelligent equipment are proposed, which can break the barriers between the organizations and improve construction efficiency; second, when the vibration wave propagates from the vibratory roller ⟶ surface of filling material ⟶ different buried depths of filling material, the peak acceleration of vibration wave gradually decreases and is hyperbolic distribution approximately. At the same time, the sensitive of attenuation is shown as follows: Z R 2 >0.9), and the concrete functional relationship among different amplitudes of harmonics can be summarized as y = Ae −BX ; fourth, the vibration energy is mainly concentrated near 10–30 Hz in the vibratory roller, but when the vibration wave propagates from vibratory roller⟶filling material, the vibration energy gradually decreases with the increase in depth, and the marginal spectrum gradually changes from one peak to two peaks, that is, 30–50 Hz and 50–100 Hz; fifth, the vibration energy in the vibrational wheel is distributed averagely in the compaction process, and the effective compaction time is two seconds, which will be helpful for revealing the propagation characteristics of vibration wave, optimizing the compaction quality control models and providing some support for the development of intelligent compaction theory of railway subgrade.

Han, Yixuan↗

Office of River Protection Advanced Low-Activity Waste Glass Research and Development Plan

The U.S. Department of Energy Office of River Protection (ORP) has initiated and leads an integrated Advanced Waste Glass (AWG) program to increase the loading of Hanford tank wastes in glass while meeting melter lifetime expectancies and process, regulatory, and product performance requirements. The integrated ORP program is focused on providing a technical, science-based foundation for making key decisions regarding the successful operation of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) facilities in the context of an optimized River Protection Project (RPP) flowsheet. The fundamental data stemming from this program will support development of advanced glass formulations, key product performance and process control models, and tactical processing strategies to ensure safe and successful operations for both the low-activity waste (LAW) and high-level waste vitrification facilities. These activities will be conducted with the objective of improving the overall RPP mission by enhancing flexibility and reducing cost and schedule.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Office of River Protection Advanced Low-Activity Waste Glass Research and Development Plan

The U.S. Department of Energy Office of River Protection (ORP) has initiated and leads an integrated Advanced Waste Glass (AWG) program to increase the loading of Hanford tank wastes in glass while meeting melter lifetime expectancies and process, regulatory, and product performance requirements. The integrated ORP program is focused on providing a technical, science-based foundation for making key decisions regarding the successful operation of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) facilities in the context of an optimized River Protection Project (RPP) flowsheet. The fundamental data stemming from this program will support development of advanced glass formulations, key product performance and process control models, and tactical processing strategies to ensure safe and successful operations for both the low-activity waste (LAW) and high-level waste vitrification facilities. These activities will be conducted with the objective of improving the overall RPP mission by enhancing flexibility and reducing cost and schedule. The purpose of this advanced LAW glass research and development plan is to identify the near-term, mid-term, and longer-term research and development activities required to develop and validate advanced LAW glasses, property-composition models and their uncertainties, and an advanced glass algorithm to support WTP facility operations, including both Direct Feed LAW and full pretreatment flowsheets. Data are needed to develop, validate, and implement 1) new glass property-composition models and 2) a new glass formulation algorithm. Hence, this plan integrates specific studies associated with increasing the Na2O and SO3/halide concentrations in glass, because these components will ultimately dictate waste loadings for LAW vitrification. Of equal importance is the development of an efficient and economic strategy for 99Tc management. Specific and detailed studies are being implemented to understand the fate of Tc throughout the WTP flowsheet and the underlying mechanisms that dictate its partitioning between streams within the LAW vitrification facility. These studies are aimed at increasing the single-pass Tc retention in glass and the potential use of high-temperature mineral phases to capture Tc. The Tc-bearing mineral phases would be thermally stable and resistant to Tc release during feed melting reactions or they could serve as alternative waste forms. The LAW glass research and development is focused on reducing the total volume of LAW glass produced and minimizing the impact of (or potentially eliminating) the need for recycle.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Radar Doppler Processing with Nonuniform Sampling.

Conventional signal processing to estimate radar Doppler frequency often assumes uniform pulse/sample spacing. This is for the convenience of t he processing. More recent performance enhancements in processor capability allow optimally processing nonuniform pulse/sample spacing, thereby overcoming some of the baggage that attends uniform sampling, such as Doppler ambiguity and SNR losses due to sidelobe control measures.

47 OTHER INSTRUMENTATION↗

Highly Efficient Non-Oxidative Methane Conversion with Continuous Hydrogen Removal

A non-oxidative methane conversion catalytic system has been successfully developed. Ball-milling and annealing above 1973 K are necessary in order to synthesize the unique methane activation catalyst. Characterization and evaluation of catalysts shows that the surface area should be carefully controlled to minimize coke deposition. The influence of temperature, pressure, space velocity and hydrogen concentration on catalytic process was systematically studied. The reaction conditions were optimized to a combination of 1323 K, ambient pressure and a space velocity of 4900 ml/g·h. A process, using 0.5% Fe/SiO 2 catalyst under these conditions, yield a methane conversion of 15.62%, with product distribution of 40.05% C 2 , 26.48% BTX and 10.7% naphthalene and demonstrated stable operation of at least 50 hours. This result meets the milestone in the phase I proposal. A non-oxidative methane catalyst-integrated SOFC reactor was accomplished, using nickel-free cells of both ScSZ oxygen-ion conductor and BZY proton conductor. With in-situ hydrogen removal enabled by SOFC, hydrogen concentration in the reactor was effectively reduced, shifting reaction equilibrium and boosting methane conversion. However, due to the high temperature requirement of this reaction, most available proton-conducting SOFCs become oxygen-ion conducting, leading to side reactions and counteracting the benefits from hydrogen removal. To take advantage of the enhanced oxygen-ion conductance of SOFC at high temperatures, we have also paired the nickel-free SOFCs with high-performance oxidative coupling of methane (OCM) catalysts. The SOFC-OCM tubular membrane reactor, employing a Mn-Ce-Na 2 WO 4 /SiO 2 -based catalyst, demonstrates a remarkable performance of 60.7% methane conversion with 41.6% C 2 + selectivity, 5.8 ethylene-to-ethane ratio and 19.4% ethylene yield. The use of integrated SOFC-OCM reactor enables better hydrocarbon selectivity and higher ethylene-to-ethane ratio, eliminating the need of an expensive air separation unit and preventing the direct co-feed of explosive methane-oxygen mixture. We believe this presents a great promise towards commercialization as an advanced methane conversion technology.

02 PETROLEUM↗

Roles of Carburization and Oxidation on Transition-Metal Catalyzed Surface Reactions

Many industrial chemical transformation processes are based on reactions catalyzed by transition metals. In some cases the nano-size particles used as catalysts are synthesized simultaneously or right before the initiation of the main catalytic reaction. Synthesis treatments involve complex processes such as reductions followed by calcinations in oxygenated environments coupled to the presence of gases used for the main reaction. Synthesis details are crucial because they have important consequences on the catalyst shape, size, and chemical composition, and may also affect the structure and composition of the catalyst support. All these effects may alter the main catalyzed reaction in unexpected ways. This work focuses on the synthesis of the overall catalytic system that includes catalyst and support taking place in parallel with the initial stages of the main catalyzed reaction. Two important processes are characterized: carburization and oxidation of the transition metal catalyst during synthesis or initial stages of the main reaction. The objective is to understand how the coking mechanism coupled to surface oxidation and changes in the substrate influence the dry reforming of methane taken as a model reaction. The approach uses first principles computational methods to investigate the catalyst synthesis and characterization and catalytic reaction mechanisms. These studies are complemented with experimental characterization done by the group of Dr. Renu Sharma at the National Institute of Standards and Technology (unfunded collaborator) using high resolution transmission electron microscopy. Specific goals are to identify the role of the synthesis process on the initial nanocatalyst structure and composition, and to determine how that structure and composition may evolve after being exposed to the reactants atmosphere. These studies facilitate a systematic analysis of conditions where the nanoparticle composition can be optimized regarding activity and stability. Moreover, the fundamental study of catalyst/support interactions yields valuable insights for other catalytic processes and is a first step toward controlled nanocatalyst synthesis.

36 MATERIALS SCIENCE↗

Exploiting new electrochemical understanding of niobium electropolishing for improved performance of SRF cavities for CEBAF

Recent incorporation of analytic electrochemistry into the development of protocols for electropolishing niobium SRF cavities has yielded new insights for optimizing this process for consistent, high-performance results. Use of reference electrodes in the electrolyte, electrochemical impedance spectroscopy (EIS), rotating disk electrodes (RDE), and controlled sample temperatures has greatly clarified the process dynamics over the empirical understanding developed via years of practice. Minimizing RF losses at high operational gradients is very valuable for CW linacs. Jefferson Lab is applying these new insights to the low-loss 7-cell cavity design developed for the CEBAF 12 GeV Upgrade. Together with controlled cleaning and assembly techniques to guard against field-emission-causing particulates, the resulting process is yielding consistent cavity performance that exceeds project requirements. Cavity tests show BCS-limited Q well above 30 MV/m. Detailed process data, interpretation, and resulting rf performance data will be presented.

Reece, Charles E.↗

Caustic Recycling Pilot Unit to Separate Sodium from LLW at Hanford Site - 12279

As part of the Department of Energy (DOE) sponsored Advanced Remediation Technologies initiative, a scheme was developed to combine Continuous Sludge Leaching (CSL), Near-Tank Cesium Removal (NTCR), and Caustic Recycling Unit (CRU) using Ceramatec technology, into a single system known as the Pilot Near-Tank Treatment System (PNTTS). The Cesium (Cs) decontaminated effluent from the NTCR process will be sent to the caustic recycle process for recovery of the caustic which will be reused in another cycle of caustic leaching in the CSL process. Such an integrated mobile technology demonstration will give DOE the option to insert this process for sodium management at various sites in Hanford, and will minimize the addition of further sodium into the waste tanks. This allows for recycling of the caustic used to remove aluminum during sludge washing as a pretreatment step in the vitrification of radioactive waste which will decrease the Low Level Waste (LLW) volume by as much as 39%. The CRU pilot process was designed to recycle sodium in the form of pure sodium hydroxide. The basis for the design of the 1/4 scale pilot caustic recycling unit was to demonstrate the efficient operation of a larger scale system to recycle caustic from the NTCR effluent stream from the Parsons process. The CRU was designed to process 0.28 liter/minute of NTCR effluent, and generate 10 M concentration of 'usable' sodium hydroxide. The proposed process operates at 40 deg. C to provide additional aluminum solubility and then recover the sodium hydroxide to the point where the aluminum is saturated at 40 deg. C. A system was developed to safely separate and vent the gases generated during operation of the CRU with the production of 10 M sodium hydroxide. Caustic was produced at a rate between 1.9 to 9.3 kg/hr. The CRU was located inside an ISO container to allow for moving of the unit close to tank locations to process the LLW stream. Actual tests were conducted with the NTCR effluent simulant from the Parsons process in the CRU. The modular CRU is easily scalable as a standalone system for caustic recycling, or for NTTS integration or for use as an In-Tank Treatment System to process sodium bearing waste to meet LLW processing needs at the Hanford site. The standalone pilot operation of the CRU to recycle sodium from NTCR effluent places the technology demonstration at TRL level 6. Multiple operations were performed with the CRU to process up to 500 gallons of the NTCR effluent and demonstrate an efficient separation of up to 70 % of the sodium without solids precipitation while producing 10 M caustic. Batch mode operation was conducted to study the effects of chemistry variation, establish the processing rate, and optimize the process operating conditions to recycle caustic from the NTCR effluent. The performance of the CRU was monitored by tracking the density parameter to control the concentration of caustic produced. Different levels of sodium were separated in tests from the effluent at a fixed operating current density and temperature. The voltage of the modules remained stable during the unit operation which demonstrated steady operation to separate sodium from the NTCR effluent. The sodium transfer current efficiency was measured in testing based on the concentration of caustic produced. Measurements showed a current efficiency of 99.8% for sodium transfer from the NTCR effluent to make sodium hydroxide. The sodium and hydroxide contents of the anolyte (NTCR feed) and catholyte (caustic product) were measured before and after each batch test. In two separate batch tests, samples were taken at different levels of sodium separation and analyzed to determine the stability of the NTCR effluent after sodium separation. The stability characteristics and changes in physical and chemical properties of the NTCR effluent chemistry after separation of sodium hydroxide as a function of storage time were evaluated. Parameters such as level of precipitated alumina, total alkalinity, analysis of Al, Na, K, Cs, Fe, OH, nitrate, nitrite, total dissolved and undissolved solids, viscosity, density, and other parameters of the NTCR effluent were measured. Changes in rheology and properties of NTCR stream to support downstream handling of the effluent after sodium separation was the basis for the analysis. The results show that the NTCR effluent is stable without the precipitation of aluminum hydroxide after 70% of the sodium was separated from the effluent. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Comparing State-Space Multivariable Controls to Multi-SISO Controls for Load Reduction of Drivetrain-Coupled Modes on Wind Turbines Through Field-Testing

In this paper we present results from an ongoing controller comparison study at the National Renewable Energy Laboratory's (NREL's) National Wind Technology Center (NWTC). The intention of the study is to demonstrate the advantage of using modern multivariable methods for designing control systems for wind turbines versus conventional approaches. We will demonstrate the advantages through field-test results from experimental turbines located at the NWTC. At least two controllers are being developed side-by-side to meet an incrementally increasing number of turbine load-reduction objectives. The first, a multiple single-input, single-output (m-SISO) approach, uses separately developed decoupled and classicially tuned controllers, which is, to the best of our knowledge, common practice in the wind industry. The remaining controllers are developed using state-space multiple-input and multiple-output (MIMO) techniques to explicity account for coupling between loops and to optimize given known frequency structures of the turbine and disturbance. In this first publication from the study, we present the structure of the ongoing controller comparison experiment, the design process for the two controllers compared in this phase, and initial comparison results obtained in field-testing.

17 WIND ENERGY↗

Quantum Optimal Control of Single Harmonic Oscillator under Quadratic Controls together with Linear Dipole Polarizability: A Fluctuation Free Expectation Value Dynamical Perspective

In this study, the optimal control equations for one dimensional quantum harmonic oscillator under the quadratic control operators together with linear dipole polarizability effects are constructed in the sense of Heisenberg equation of motion. A numerical technique based on the approximation to the non-commuting quantum mechanical operators from the fluctuation free expectation value dynamics perspective in the classical limit is also proposed for the solution of optimal control equations which are ODEs with accompanying boundary conditions. The dipole interaction of the system is considered to be linear, and the observable whose expectation value will be suppressed during the control process is considered to be quadratic in terms of position operator x. The objective term operator is also assumed to be quadratic.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Scaling up carboxylic acid production from cheese whey and brewery wastewater via methane-arrested anaerobic digestion

In a circular economy, organic waste streams are valuable resources for sustainably producing chemicals and fuels. This study investigates a new methane-arrested anaerobic digestion (MAAD) process that converts high-strength cheese whey and brewery wastewater into carboxylic acids. The process was developed and optimized under various bench-scale semi-continuous (fed-batch) operating conditions (e.g., retention time, organic loading rate, pH, and feed/harvest frequency). The MAAD responses to various control-failure scenarios were also systematically investigated. The highest total acid productivity was 26g/(L liq ·d) with a substrate conversion of 0.79g COD digested /g COD fed at a hydraulic retention time (HRT) of approximately 2 d in a 14-L digester. The most stable conditions for digester operation (HRT 3 d at pH 6.0 and 40°C) were selected for process scale-up to 100gal (~380 L). Semi-continuous, pilot-scale MAAD successfully produced a total acid concentration of 40.6+/-1.1 g/L with 8.1% acetic acid, 45.1% butyric acid, and 44.5% lactic acid. The links between wastewater characteristics, operation mode, digester scale, and microbial community structure were statistically analyzed. The results show genera Sporolactobacillus and Clostridium positively correlate with butyric acid production (Pearson correlation coefficient>0.5). Moreover, four kinetic models were developed and fit to batch MAAD experimental datasets (R 2 >95%) and were successfully applied to predict the total acid production in both bench-and pilot-scale semi-continuous MAADs. In conclusion, this study shows MAAD has the potential for industrial-scale applications and is a robust platform to valorize low- or negative-value waste streams into high-value bioproducts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pyridine Catalysis of Anhydride Hydrolysis within Carbodiimide‐Driven Reaction Networks

Carbodiimide-fueled reaction networks offer a versatile platform for nonequilibrium chemical systems. Typically, the carbodiimide converts a carboxylic acid to its anhydride, called “activation,” which subsequently undergoes hydrolysis, called “deactivation.” Here, we investigate pyridines with variable nucleophilicity as catalysts to control deactivation (pyridine, 4-methylpyridine, 4-methoxypyridine, and 4-dimethylaminopyridine). Reactions have been monitored by NMR spectroscopy. Although this reaction network is simple, determination of well-defined rate constants from kinetic modeling is challenging because of correlation between the parameters. This issue can be addressed by analyzing the anhydride hydrolysis independently. The rate of attack of the pyridines on the anhydride follows expected nucleophilicity trends, although this is offset by increased protonation of more-nucleophilic pyridines at typical pH's. The optimized parameters can be used to model the full carbodiimide-driven process, although the presence of the common carbodiimide EDC has unanticipated effects on the anhydride hydrolysis rate. The results offer context for controlling carbodiimide-fueled reaction networks through the choice of suitable catalysts and pH.

Anhydrides↗

Operability and control in process intensification and modular design: Challenges and opportunities

Abstract In this article, the importance of considering operability and control criteria in the analysis and design of intensified and modular processes is discussed. We first analyze the impact on operability of key factors including: (i) degrees of freedom, (ii) process constraints, (iii) numbering up vs. scaling up, and (iv) dynamic/periodic operation. Comparative examples are presented to showcase the pros and cons in intensified/modular systems vs. their conventional counterparts from operability and control aspects. Then we look into metrics and tools to address these challenges such as: (i) flexibility analysis, (ii) operability‐based design, and (iii) advanced model‐based control. Considering different conceptual design stages as synthesis intensification, steady‐state design, and dynamic operational optimization, we highlight the need to incorporate different levels of operability considerations. Future research opportunities and perspectives are also identified, particularly emphasizing the importance of a holistic strategy for integrated design, operability, and control of intensified and modular process systems.

Pistikopoulos, Efstratios N.↗

Distributionally Robust Partially Observable Markov Decision Process with Moment-Based Ambiguity

In this paper, we consider a distributionally robust partially observable Markov decision process (DR-POMDP), where the distribution of the transition-observation probabilities is unknown at the beginning of each decision period, but their realizations can be inferred using side information at the end of each period after an action being taken. We build an ambiguity set of the joint distribution using bounded moments via conic constraints and seek an optimal policy to maximize the worst-case (minimum) reward for any distribution in the set. We show that the value function of DR-POMDP is piecewise linear convex with respect to the belief state and propose a heuristic search value iteration method for obtaining lower and upper bounds of the value function. We conduct numerical studies and demonstrate the computational performance of our approach via testing instances of a dynamic epidemic control problem. Our results show that DR-POMDP can produce more robust policies under misspecified distributions of transition-observation probabilities as compared to POMDP but has less costly solutions than robust POMDP. The DR-POMDP policies are also insensitive to varying parameter in the ambiguity set and to noise added to the true transition-observation probability values obtained at the end of each decision period.

97 MATHEMATICS AND COMPUTING↗

Pseudospectral convex optimization for on-ramp merging control of connected vehicles

It can be a daunting task for human drivers to merge into highways because of the intricate vehicle negotiations and potential risk within limited time and space. Connected vehicle (CV) technologies could be a solution to this problem and offer many benefits to the road safety, traffic mobility, and energy efficiency. However, real-time optimal control of CVs is still an open challenge, due to the nonlinear vehicle dynamics, non-convex fuel consumption model, and highly dynamic uncertain inter-vehicle interactions. To tackle these issues, a novel real-time optimal control approach that balances the computational efficiency and solution optimality is proposed for the purpose of onboard application. To this end, the pseudospectral collocation method is integrated with a sequential convex programming approach to develop two new optimization algorithms, which are implemented within a model predictive control (MPC) framework to allow for real-time generation of optimal merging speed profiles. One algorithm leverages the line search technique to improve convergence, and the other benefits from the trust region method for better computational efficiency. The optimality and convergence process of both proposed algorithms are investigated by comparing their solutions with a popular non-linear solver. Furthermore, simulation results show that the proposed methods outperform the benchmark in terms of computational cost, fuel consumption, and traffic efficiency. In particular, the proposed fuel-economy merging rule can save 57.1% fuel consumption on average on four different traffic volumes. Meanwhile, the proposed optimal control algorithms can reduce 2.2% travel time on average comparing to the “first-in-first-out” merging rule.

33 ADVANCED PROPULSION SYSTEMS↗