Search NASA⌕ Search

SEARCH · Search NASA

Results for “quantum dot”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

The Study On The Physical Properties Of CdS Quantum Dots Synthesized By Ligand Exchange in Cd{sup 2+}-thiol Aqueous Solutions

We synthesized CdS quantum dots in aqueous medium using three thiolate-ligands, 2-mercaptoethanol (2ME), 3-mercaptopropanoic acid (MPA) and dimercaprol (BAL) by ligand exchange method. With a fixed concentration of thiols, the absorption edge of the quantum dots formed shifted towards shorter wavelength, as to the decreasing of a concentration of CdCl{sub 2}. When a concentration of CdCl{sub 2} and thiol was same, band gap energies and average sizes of the quantum dots were shown to be 2.65 eV, 3.26 nm for MPA, 2.84 eV, 3.16 nm for 2 ME and 3.16 eV, 1.81 nm for BAL, respectively. PL spectra analysis shows that as the decrease in molar concentration of CdCl{sub 2}, emission peak shifted towards shorter wavelength.

36 MATERIALS SCIENCE↗

Engineering Auger recombination in colloidal quantum dots via dielectric screening

Auger recombination is the main non-radiative decay pathway for multi-carrier states of colloidal quantum dots, which affects performance of most of their optical and optoelectronic applications. Outstanding single-exciton properties of CdSe/CdS core/shell quantum dots enable us to simultaneously study the two basic types of Auger recombination channels-negative trion and positive trion channels. Though Auger rates of positive trion are regarded to be much faster than that of negative trion for II-VI quantum dots in literature, our experiments find the two rates can be inverted for certain core/shell geometries. This is confirmed by theoretical calculations as a result of geometry-dependent dielectric screening. By varying the core/shell geometry, both types of Auger rates can be independently tuned for ~1 order of magnitude. Experimental and theoretical findings shed new light on designing quantum dots with necessary Auger recombination characteristics for high-power light-emitting-diodes, lasers, single-molecular tracking, super-resolution microscope, and advanced quantum light sources.

36 MATERIALS SCIENCE↗

Built-in electric field and radiative efficiency of polar (0001) and semipolar (11–22) Al{sub 0.5}Ga{sub 0.5}N/GaN quantum dots

We compare the optical properties of ensembles of polar (0001) and semipolar (11–22) Al{sub 0.5}Ga{sub 0.5}N/GaN quantum dots grown by molecular beam epitaxy The polar quantum dot emission shows a huge Stark shift. Using dot height distributions measured by transmission electron microscopy, a simple model allows accounting for the PL energies and lineshapes, and to the screening of the Stark field. The semipolar quantum dots emission show a much weaker Stark effect. High room temperature quantum yields attest the efficiency of 3D-confinement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging surface plasmon polaritons using proximal self-assembled InGaAs quantum dots

We present optical investigations of hybrid plasmonic nanosystems consisting of lithographically defined plasmonic Au-waveguides or beamsplitters on GaAs substrates coupled to proximal self-assembled InGaAs quantum dots. We designed a sample structure that enabled us to precisely tune the distance between quantum dots and the sample surface during nano-fabrication and demonstrated that non-radiative processes do not play a major role for separations down to ∼10 nm. A polarized laser beam focused on one end of the plasmonic nanostructure generates propagating surface plasmon polaritons that, in turn, create electron-hole pairs in the GaAs substrate during propagation. These free carriers are subsequently captured by the quantum dots ∼25 nm below the surface, giving rise to luminescence. The intensity of the spectrally integrated quantum dot luminescence is used to image the propagating plasmon modes. As the waveguide width reduces from 5 μm to 1 μm, we clearly observe different plasmonic modes at the remote waveguide end, enabling their direct imaging in real space. This imaging technique is applied to a plasmonic beamsplitter facilitating the determination of the splitting ratio between the two beamsplitter output ports as the interaction length L{sub i} is varied. A splitting ratio of 50:50 is observed for L{sub i}∼9±1 μm and 1 μm wide waveguides for excitation energies close to the GaAs band edge. Our experimental findings are in good agreement with mode profile and finite difference time domain simulations for both waveguides and beamsplitters.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Direct evidence of single quantum dot emission from GaN islands formed at threading dislocations using nanoscale cathodoluminescence: A source of single photons in the ultraviolet

Intense emission from GaN islands embedded in AlN resulting from GaN/AlN quantum well growth is directly resolved by performing cathodoluminescence spectroscopy in a scanning transmission electron microscope. Line widths down to 440 μeV are measured in a wavelength region between 220 and 310 nm confirming quantum dot like electronic properties in the islands. These quantum dot states can be structurally correlated to islands of slightly enlarged thicknesses of the GaN/AlN quantum well layer preferentially formed in vicinity to dislocations. The quantum dot states exhibit single photon emission in Hanbury Brown-Twiss experiments with a clear antibunching in the second order correlation function at zero time delay.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photoinduced Surface Oxidation and Its Effect on the Exciton Dynamics of CdSe Quantum Dots

With increased interest in semiconductor nanoparticles for use in quantum dot solar cells there comes a need to understand the long-term photostability of such materials. Colloidal CdSe quantum dots (QDs) were suspended in toluene and stored in combinations of light/dark and N{sub 2}/O{sub 2} to simulate four possible benchtop storage environments. CdSe QDs stored in a dark, oxygen-free environment were observed to better retain their optical properties over the course of 90 days. The excited state lifetimes, determined through femtosecond transient absorption spectroscopy, of air-equilibrated samples exposed to light exhibit a decrease in average lifetime (0.81 ns) when compared to samples stored in a nitrogen/dark environment (8.3 ns). A photoetching technique commonly used for controlled reduction of QD size was found to induce energetic trap states to CdSe QDs and accelerate the rate of electron-hole recombination. X-ray absorption near edge structure (XANES) analysis confirms surface oxidation, the extent of which is shown to be dependent on the thickness of the ligand shell.

14 SOLAR ENERGY↗

An improved pyrolysis route to synthesize carbon-coated CdS quantum dots with fluorescence enhancement effect

Well-dispersed carbon-coated CdS (CdS-C) quantum dots were successfully prepared via the improved pyrolysis of bis(1-dodecanethiol)-cadmium(II) under nitrogen atmosphere. This simple method effectively solved the sintered problem resulted from conventional pyrolysis process. The experimental results indicated that most of the as-prepared nanoparticles displayed well-defined core-shell structures. The CdS cores with diameter of {approx}5 nm exhibited hexagonal crystal phase, the carbon shells with thickness of {approx}2 nm acted as a good dispersion medium to prevent CdS particles from aggregation, and together with CdS effectively formed a monodisperse CdS-Carbon nanocomposite. This composite presented a remarkable fluorescence enhancement effect, which indicated that the prepared nanoparticles might be a promising photoresponsive material or biosensor. This improved pyrolysis method might also offer a facile way to prepare other carbon-coated semiconductor nanostructures. - Graphical abstract: We demonstrated a facile approach to synthesize well-dispersed carbon-coated CdS quantum dots. The as-prepared nanoparticles presented remarkable fluorescence enhancement effect. Highlights: > Carbon-coated CdS quantum dots were synthesized by an one-step pyrolysis method. > Well-dispersed CdS-carbon nanoparticles were obtained by an acid treatment process. > As-prepared nanoparticles presented remarkable fluorescence enhancement effect.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Observation of the Kondo effect in a spin-3/2 hole quantum dot

We report the observation of the Kondo effect in a spin-3/2 hole quantum dot formed near pinch-off in a GaAs quantum wire. We clearly observe two distinctive hallmarks of quantum dot Kondo physics. First, the zero-bias peak in the differential conductance splits an in-plane magnetic field and the splitting is independent of gate voltage. Second, the splitting rate is twice as large as that for the lowest one-dimensional subband. We show that the Zeeman splitting of the zero-bias peak is highly anisotropic and attribute this to the strong spin-orbit interaction for holes in GaAs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Excitonic fine-structure splitting in telecom-wavelength InAs/GaAs quantum dots: Statistical distribution and height-dependence

The variation of the excitonic fine-structure splitting is studied for semiconductor quantum dots under the influence of a strain-reducing layer, utilized to shift the emission wavelength of the excitonic transition into the telecom-wavelength regime of 1.3–1.5 μm. By means of a sp{sup 3}s{sup *}-tight-binding model and configuration interaction, we calculate wavelength shifts and fine-structure splittings for various quantum dot geometries. We find the splittings remaining small and even decreasing with strain-reducing layer composition for quantum dots with large height. Combined with an observed increased emission efficiency, the applicability for generation of entanglement photons is persistent.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Entanglement and bistability in coupled quantum dots inside a driven cavity

Generation and dissipation of entanglement between two coupled quantum dots (QDs) in a cavity driven by a coherent field is studied. We find that it is possible to generate and sustain a large amount of entanglement between the quantum dots in the steady state, even in the presence of strong decay in both the cavity and the dots. We investigate the effect of different parameters (decay rates, coupling strengths, and detunings) on entanglement. We find that the cavity field shows bistability and study the effect of relevant parameters on the existence of this bistable behavior. We also study the correlation between the cavity field and the entanglement between the dots. The experimental viability of the proposed scheme is discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exchange and correlation effects in the transmission phase through a few-electron quantum dot

The transmission phase through a quantum dot with few electrons shows a complex, nonuniversal behavior. Here we combine configuration-interaction calculations--treating rigorously Coulomb interaction--and the Friedel sum rule to provide a rationale for the experimental findings. The phase evolution for more than two electrons is found to strongly depend on dot's shape and electron density whereas from one to two, the phase never lapses. In the Coulomb (Kondo) regime, the phase shifts are significant fractions of pi (pi/2) for the second and subsequent charge addition if the dot is strongly correlated. These results are explained by the proper inclusion in the theory of Coulomb interaction, spin, and orbital degrees of freedom.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Dispersion of the electron g factor anisotropy in InAs/InP self-assembled quantum dots

The electron g factor in an ensemble of InAs/InP quantum dots with emission wavelengths around 1.4 μm is measured using time-resolved pump-probe Faraday rotation spectroscopy in different magnetic field orientations. Thereby, we can extend recent single dot photoluminescence measurements significantly towards lower optical transition energies through 0.86 eV. This allows us to obtain detailed insight into the dispersion of the recently discovered g factor anisotropy in these infrared emitting quantum dots. We find with decreasing transition energy over a range of 50 meV a strong enhancement of the g factor difference between magnetic field normal and along the dot growth axis, namely, from 1 to 1.7. We argue that the g factor cannot be solely determined by the confinement energy, but the dot asymmetry underlying this anisotropy therefore has to increase with increasing dot size.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anthracene Diphosphate Ligands for CdSe Quantum Dots; Molecular Design for Efficient Upconversion

Quantum dot (QD)-sensitized photon upconversion follows a multi-step energy transfer process from the QD to transmitter ligand to a soluble annihilator. Using a novel 10-R-anthracene-1,8-diphosphoric acid (R = octyl, 2- hexyldecyl, phenyl) ligand with high binding affinity for CdSe QD surfaces, we demonstrate a photon upconversion process that is limited by the transmitter to annihilator transfer efficiency. Using 1 H NMR spectroscopy, we demonstrate that these bidentate diphosphate ligands rapidly and irreversibly displace two carboxylate ligands. These ligands mediate energy transfer from the photoexcited QDs to a triplet annihilator (1,10-diphenylanthracene), producing overall photon upconversion quantum efficiencies as high as 17%, the highest for QDs with no shells. In conclusion, transient absorption spectroscopy shows that the anthracene dihydrogen phosphate (ADP) ligand supports a 3.4 fold longer triplet state lifetime compared to 9-anthracene carboxylic acid (299.9 ± 9.5 vs 88.2 ± 2.1 μs), increasing the probability of energy transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Photoluminescence Blinking Dynamics of Colloidal Quantum Dots in the Presence of Controlled External Electron Traps

The effect of the external charge trap on the photoluminescence blinking dynamics of individual colloidal quantum dots is investigated with a series of colloidal quantum dot-bridge-fullerene dimers with varying bridge lengths, where the fullerene moiety acts as a well-defined, well-positioned external charge trap. It is found that charge transfer followed by charge recombination is an important mechanism in determining the blinking behavior of quantum dots when the external trap is properly coupled with the excited state of the quantum dot, leading to a quasi-continuous distribution of 'on' states and an early fall-off from a power-law distribution for both 'on' and 'off' times associated with quantum dot photoluminescence blinking.

36 MATERIALS SCIENCE↗

Polarized quantum dot emission in electrohydrodynamic jet printed photonic crystals

Tailored optical output, such as color purity and efficient optical intensity, are critical considerations for displays, particularly in mobile applications. To this end, we demonstrate a replica molded photonic crystal structure with embedded quantum dots. Electrohydrodynamic jet printing is used to control the position of the quantum dots within the device structure. This results in significantly less waste of the quantum dot material than application through drop-casting or spin coating. In addition, the targeted placement of the quantum dots minimizes any emission outside of the resonant enhancement field, which enables an 8× output enhancement and highly polarized emission from the photonic crystal structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low repetition rate and broad frequency tuning from a grating-coupled passively mode-locked quantum dot laser

Passively mode-locked quantum dot lasers with a grating-coupled external cavity arrangement are investigated. A broad repetition-rate tuning range of fundamental mode-locking from 2 GHz to a record-low frequency of 79.3 MHz is achieved with selecting the wavelength at 1.28 μm. A narrow RF linewidth of ∼25 Hz and an intrinsic linewidth as low as 0.15 Hz are also obtained.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pressure-Modulated Energy Transfer Dynamics in Mn 2+ -Doped CdS/ZnS Core/Shell Quantum Dots

Transition metal doping in semiconductor quantum dots (QDs) significantly impacts their optical properties, thus expanding the range of their potential optoelectronic applications. This study investigates the pressure-dependent energy transfer dynamics in Mn 2+ -doped CdS/ZnS core/shell QDs, focusing on how external hydrostatic pressure modulates these dynamics and optical properties. By synthesizing Mn 2+ -doped QDs with varying Mn 2+ doping concentrations, we explore the effects of the pressure on photoluminescence (PL) spectra and energy transfer efficiency. Our study reveals that increasing pressure induces a blueshift in the QD host bandgap PL and a redshift in the Mn 2+ dopant PL. The pressure-induced shifts highlight a unique modulation mechanism where the energy transfer efficiency decreases with pressure due to reduced wave function overlap between host excitons and Mn 2+ dopants. Detailed analysis of the PL quantum yields and energy transfer rate constants provides insights into these dynamics, suggesting that the pressure can effectively and reversibly regulate the energy transfer efficiencies and rates. In conclusion, these results have implications for developing pressure-sensitive configurable devices and exploring pressure-induced phenomena in doped nanomaterials.

36 MATERIALS SCIENCE↗

Functionalized Block-Copolymer Templates for Synthesis and Shape Control of Quantum Dots

In this paper, a new quantum dot synthesis method based on metallic-block copolymer precursors was developed. The synthesis produced CdS QDs assembled into chains. This method provides a new model for the study of 1D QD chains to determine its effect on charge transport and optoelectronic coupling. This synthesis method was readily extended to other semiconductor materials including PbS and perovskites producing QDs of various shapes. Finally, it evidenced further promise of this synthesis method to assist in the assembly, shape and size control of various nanomaterials.

36 MATERIALS SCIENCE↗