Search NASA⌕ Search

SEARCH · Search NASA

Results for “representativeness analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Washington

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Washington. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of West Virginia

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of West Virginia. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Wisconsin

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Wisconsin. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Cost Effectiveness of ASHRAE Standard 90.1-2013 for the State of Wyoming

Moving to the ASHRAE Standard 90.1-2013 (ASHRAE 2013) edition from Standard 90.1-2010 (ASHRAE 2010) is cost-effective for the State of Wyoming. The table below shows the state-wide economic impact of upgrading to Standard 90.1-2013 in terms of the annual energy cost savings in dollars per square foot, additional construction cost per square foot required by the upgrade, and life-cycle cost (LCC) per square foot. These results are weighted averages for all building types in all climate zones in the state, based on weightings shown in Table 4. The methodology used for this analysis is consistent with the methodology used in the national cost-effectiveness analysis. Additional results and details on the methodology are presented in the following sections. The report provides analysis of two LCC scenarios: Scenario 1, representing publicly-owned buildings, considers initial costs, energy costs, maintenance costs, and replacement costs—without borrowing or taxes. Scenario 2, representing privately-owned buildings, adds borrowing costs and tax impacts.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Impacts of the EISA 2007 Energy Efficiency Standard on General Service Lamps

The Energy Policy and Conservation Act of 1975, as amended by the Energy Independence and Security Act of 2007 (EISA 2007), requires that, effective beginning January 1, 2020, the Secretary of Energy shall prohibit the sale of any general service lamp (GSL) that does not meet a minimum efficacy standard of 45 lumens per watt. This is referred to as the EISA 2007 backstop. The U.S. Department of Energy recently revised the definition of the term GSL to include certain lamps that were either previously excluded or not explicitly mentioned in the EISA 2007 definition. For this subset of GSLs, we assess the impacts of the EISA 2007 backstop on national energy consumption, carbon dioxide emissions, and consumer expenditures. To estimate these impacts, we projected the energy use, purchase price, and operating cost of representative lamps purchased during a 30-year analysis period, 2020-2049, for cases in which the EISA 2007 backstop does and does not take effect; the impacts of the backstop are then given by the difference between the two cases. In developing the projection model, we also performed the most comprehensive assessment to date of usage patterns and lifetime distributions for the analyzed lamp types in the United States. There is substantial uncertainty in the estimated impacts, which arises from uncertainty in the speed and extent of the market conversion to solid state lighting technology that would occur in the absence of the EISA 2007 backstop. In our central estimate we find that the EISA 2007 backstop results in significant energy savings of 27 quads and consumer net present value of $120 billion (at a seven percent discount rate) for lamps shipped between 2020 and 2049, and carbon dioxide emissions reduction of 540 million metric tons by 2030 for those GSLs not explicitly included in the EISA 2007 definition of a GSL.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Impact of the EISA 2007 Energy Efficiency Standard on General Service Lamps

The Energy Policy and Conservation Act of 1975, as amended by the Energy Independence and Security Act of 2007 (EISA 2007), requires that, effective beginning January 1, 2020, the Secretary of Energy shall prohibit the sale of any general service lamp (GSL) that does not meet a minimum efficacy standard of 45 lumens per watt. This is referred to as the EISA 2007 backstop. The U.S. Department of Energy recently revised the definition of the term GSL to include certain lamps that were either previously excluded or not explicitly mentioned in the EISA 2007 definition. For this subset of GSLs, we assess the impacts of the EISA 2007 backstop on national energy consumption, carbon dioxide emissions, and consumer expenditures. To estimate these impacts, we projected the energy use, purchase price, and operating cost of representative lamps purchased during a 30-year analysis period, 2020-2049, for cases in which the EISA 2007 backstop does and does not take effect; the impacts of the backstop are then given by the difference between the two cases. In developing the projection model, we also performed the most comprehensive assessment to date of usage patterns and lifetime distributions for the analyzed lamp types in the United States. There is substantial uncertainty in the estimated impacts, which arises from uncertainty in the speed and extent of the market conversion to solid state lighting technology that would occur in the absence of the EISA 2007 backstop. In our central estimate we find that the EISA 2007 backstop results in significant energy savings of 27 quads and consumer net present value of $120 billion (at a seven percent discount rate) for lamps shipped between 2020 and 2049, and carbon dioxide emissions reduction of 540 million metric tons by 2030 for those GSLs not explicitly included in the EISA 2007 definition of a GSL.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Peak Demand Savings from Efficiency: Opportunities and Practices [Slides]

Electricity systems are designed to meet peak demand - the maximum load during a specified period, typically in summer - even if that demand occurs only a few hours in a year. Yet most evaluations of electricity efficiency programs focus on reductions in annual energy use. However, these efficiency programs are also delivering peak demand savings at an affordable cost. A new study by the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) explores the program administrator (PA) cost - or the cost to implement an energy efficiency program to a utility or third party administrator - of saving peak demand through efficiency programs for electric utility customers. Berkeley Lab collected data on costs, annual energy savings, and peak demand savings for electricity efficiency programs for 52 utilities and other program administrators in 15 states between 2014 and 2018. The analysis focused on eight program types that represent 68% of the peak demand savings for the utilities and program administrators studied. The findings improve our understanding of which energy efficiency programs produce the most peak demand savings and their cost performance.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Industry-Average Performance for Components and Initiating Events at U.S. Commercial Nuclear Power Plants: 2020 Update

This report documents the quantitative results of the current industry-average performance for components and initiating events (IEs) at U.S. commercial nuclear power plants (NPPs). It represents the third update of the original analysis in NUREG/CR-6928 with data through 2020. Continuous characterization and updating of current industry-average performance with the latest industry data available are important steps in maintaining up-to-date risk models. Typically, data from 1998–2002 were used in NUREG/CR-6928, data from 1998–2010 in the first update, data from 1998–2015 in the second update, and data from 2006–2020 in this update, although many IEs required longer periods for adequate characterization of frequencies in all these analyses. As with NUREG/CR-6928 and previous updates, four types of events are covered in this report: component unreliability (e.g., a pump that fails to start or fails to run), component or train unavailability resulting from test or maintenance outages, special event probabilities covering operational issues (e.g., pump restarts and injection valve re-openings during unplanned demands), and IE frequencies. Results (in the form of beta distributions for failure probabilities upon demand and gamma distributions for rates) are used as inputs to the U.S. Nuclear Regulatory Commission standardized plant analysis risk models covering U.S. commercial NPPs.

99 GENERAL AND MISCELLANEOUS↗

"Soiling, Cleaning, and Abrasion: The Results of the Five-Year Photovoltaic Glass Coating Field Study" [Slides]

External contamination ("soiling") of the incident surface is a major limiting factor for solar technologies. A 5-year field glass coupon study was conducted to better understand external contamination and its effects; compare cleaning methods and the use of preventative coatings; and explore the abrasion resulting from cleaning to advise on accelerated abrasion testing. Test sites included the cities of Dubai (UAE), Kuwait City (Kuwait), Mesa (AZ), Mumbai (India), and Sacramento (CA). Through the 5-year cumulative study, dry brush, water spray, and wet sponge and squeegee cleaning methods were compared to no cleaning. Optical microscopy was used to obtain images, including representative color images, grayscale images for object analysis, and oblique images for coating integrity assessment. A thresholding protocol was developed to analyze and distinguish specimens using the ImageJ software. Optical performance was quantified using a spectrophotometer, including comprehensive optical characterization (transmittance, reflectance, and absorptance in addition to forward- and back-scattering). Atomic force microscopy was used to verify the abrasion damage morphology, including the width and depth of surface scratches. Analysis of the results included correlation of optical performance and particle area coverage, rank order (by coating or location), and the acceleration factor for abrasion damage. The efficacy of external cleaning was more readily distinguished from the effectiveness of antisoiling coatings. The acceleration factor for dry brush cleaning of a porous silica coating was found to be on the order of unity.

14 SOLAR ENERGY↗

Cost of Wind Energy Review: 2024 Edition [Slides]

The primary elements of this analysis include: Estimated LCOE for (1) a representative land-based wind energy project installed in a moderate wind resource in the United States, (2) a representative fixed-bottom offshore wind energy project installed in the U.S. North Atlantic, and (3) a representative floating offshore wind energy project installed off the U.S. Pacific Coast. It also updates the LCOE estimates for representative residential-, commercial-, and large-scale distributed wind projects installed in a moderate wind resource in the United States. A sensitivity analyses is included that shows the range of effects that basic LCOE variables could have on the cost of wind energy for land-based and offshore wind projects and provides updated Fiscal Year 2024 values for land-based and offshore wind energy used for Government Performance and Results Act (GPRA) reporting and illustrated progress toward established GPRA targets.

17 WIND ENERGY↗

Methods for modeling impact-induced reactivity changes in small reactors.

This paper describes techniques for determining impact deformation and the subsequent reactivity change for a space reactor impacting the ground following a potential launch accident or for large fuel bundles in a shipping container following an accident. This technique could be used to determine the margin of subcriticality for such potential accidents. Specifically, the approach couples a finite element continuum mechanics model (Pronto3D or Presto) with a neutronics code (MCNP). DAGMC, developed at the University of Wisconsin-Madison, is used to enable MCNP geometric queries to be performed using Pronto3D output. This paper summarizes what has been done historically for reactor launch analysis, describes the impact criticality analysis methodology, and presents preliminary results using representative reactor designs.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

MONTI: A Multi-Omics Non-negative Tensor Decomposition Framework for Gene-Level Integrative Analysis

Multi-omics data is frequently measured to enrich the comprehension of biological mechanisms underlying certain phenotypes. However, due to the complex relations and high dimension of multi-omics data, it is difficult to associate omics features to certain biological traits of interest. For example, the clinically valuable breast cancer subtypes are well-defined at the molecular level, but are poorly classified using gene expression data. Here, we propose a multi-omics analysis method called MONTI (Multi-Omics Non-negative Tensor decomposition for Integrative analysis), which goal is to select multi-omics features that are able to represent trait specific characteristics. Here, we demonstrate the strength of multi-omics integrated analysis in terms of cancer subtyping. The multi-omics data are first integrated in a biologically meaningful manner to form a three dimensional tensor, which is then decomposed using a non-negative tensor decomposition method. From the result, MONTI selects highly informative subtype specific multi-omics features. MONTI was applied to three case studies of 597 breast cancer, 314 colon cancer, and 305 stomach cancer cohorts. For all the case studies, we found that the subtype classification accuracy significantly improved when utilizing all available multi-omics data. MONTI was able to detect subtype specific gene sets that showed to be strongly regulated by certain omics, from which correlation between omics types could be inferred. Furthermore, various clinical attributes of nine cancer types were analyzed using MONTI, which showed that some clinical attributes could be well explained using multi-omics data. We demonstrated that integrating multi-omics data in a gene centric manner improves detecting cancer subtype specific features and other clinical features, which may be used to further understand the molecular characteristics of interest. The software and data used in this study are available at: https://github.com/inukj/MONTI.

59 BASIC BIOLOGICAL SCIENCES↗

Analyzing Relationships Between Economic and Neighborhood-Related Social Determinants of Health and Intensive Care Unit Length of Stay for Critically Ill Children With Medical Complexity Presenting With Severe Sepsis

Objectives: Of the Social Determinants of Health (SDoH), we evaluated socioeconomic and neighborhood-related factors which may affect children with medical complexity (CMC) admitted to a Pediatric Intensive Care Unit (PICU) in Shelby County, Tennessee with severe sepsis and their association with PICU length of stay (LOS). We hypothesized that census tract-level socioeconomic and neighborhood factors were associated with prolonged PICU LOS in CMC admitted with severe sepsis in the underserved community. Methods: This single-center retrospective observational study included CMC living in Shelby County, Tennessee admitted to the ICU with severe sepsis over an 18-month period. Severe sepsis CMC patients were identified using an existing algorithm incorporated into the electronic medical record at a freestanding children's hospital. SDoH information was collected and analyzed using patient records and publicly available census-tract level data, with ICU length of stay as the primary outcome. Results: 83 encounters representing 73 patients were included in the analysis. The median PICU LOS was 9.04 days (IQR 3.99–20.35). The population was 53% male with a median age of 4.1 years (IQR 1.96–12.02). There were 57 Black/African American patients (68.7%) and 85.5% had public insurance. Based on census tract-level data, about half (49.4%) of the CMC severe sepsis population lived in census tracts classified as suffering from high social vulnerability. There were no statistically significant relationships between any socioeconomic and neighborhood level factors and PICU LOS. Conclusion: Pediatric CMC severe sepsis patients admitted to the PICU do not have prolonged lengths of ICU stay related to socioeconomic and neighborhood-level SDoH at our center. A larger sample with the use of individual-level screening would need to be evaluated for associations between social determinants of health and PICU outcomes of these patients.

60 APPLIED LIFE SCIENCES↗

Performance of Laser-Based Electronic Devices for Structural Analysis of Amazonian Terra-Firme Forests

Tropical vegetation biomass represents a key component of the carbon stored in global forest ecosystems. Estimates of aboveground biomass commonly rely on measurements of tree size (diameter and height) and then indirectly relate, via allometric relationships and wood density, to biomass sampled from a relatively small number of harvested and weighed trees. Recently, however, novel in situ remote sensing techniques have been proposed, which may provide nondestructive alternative approaches to derive biomass estimates. Nonetheless, we still lack knowledge of the measurement uncertainties, as both the calibration and validation of estimates using different techniques and instruments requires consistent assessment of the underlying errors. To that end, we investigate different approaches estimating the tropical aboveground biomass in situ. We quantify the total and systematic errors among measurements obtained from terrestrial light detection and ranging (LiDAR), hypsometer-based trigonometry, and traditional forest inventory. We show that laser-based estimates of aboveground biomass are in good agreement (<10% measurement uncertainty) with traditional measurements. However, relative uncertainties vary among the allometric equations based on the vegetation parameters used for parameterization. We report the error metrics for measurements of tree diameter and tree height and discuss the consequences for estimated biomass. Despite methodological differences detected in this study, we conclude that laser-based electronic devices could complement conventional measurement techniques, thereby potentially improving estimates of tropical vegetation biomass.

54 ENVIRONMENTAL SCIENCES↗

Peer Review of NRC Standardized Plant Analysis Risk Models

The Nuclear Regulatory Commission (NRC) Standardized Plant Analysis Risk (SPAR) Models underwent a Peer Review using ASME PRA standard (Addendum C) as endorsed by NRC in Regulatory Guide (RG) 1.200. The review was performed by a mix of industry probabilistic risk analysis (PRA) experts and NRC PRA experts. Representative SPAR models, one PWR and one BWR, were reviewed against Capability Category I of the ASME PRA standard. Capability Category I was selected as the basis for review due to the specific uses/applications of the SPAR models. The BWR SPAR model was reviewed against 331 ASME PRA Standard Supporting Requirements; however, based on the Capability Category I level of review and the absence of internal flooding and containment performance (LERF) logic only 216 requirements were determined to be applicable. Based on the review, the BWR SPAR model met 139 of the 216 supporting requirements. The review also generated 200 findings or suggestions. Of these 200 findings and suggestions 142 were findings and 58 were suggestions. The PWR SPAR model was also evaluated against the same 331 ASME PRA Standard Supporting Requirements. Of these requirements only 215 were deemed appropriate for the review (for the same reason as noted for the BWR). The PWR review determined that 125 of the 215 supporting requirements met Capability Category I or greater. The review identified 101 findings or suggestions (76 findings and 25 suggestions). These findings or suggestions were developed to identify areas where SPAR models could be enhanced. A process to prioritize and incorporate the findings/suggestions supporting requirements into the SPAR models is being developed. The prioritization process focuses on those findings that will enhance the accuracy, completeness and usability of the SPAR models.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

The LandScan Global Population Distribution Project: Current State of the Art and Prospective Innovation

Advances in remote sensing, dasymetric mapping techniques, and the ever-increasing availability of spatial datasets have enhanced global human population distribution databases. These datasets demonstrate an enormous improvement over the conventional use of choropleth maps to represent population distribution and are vital for analysis and planning purposes including humanitarian response, disease mapping, risk analysis, and evacuation modeling. Dasymetric mapping techniques have been employed to address spatial mismatch, but also to develop finer resolution population distributions in areas of the world where subnational census data are coarse or non-existent. One such implementation is the LandScan Global model which provides a 30 arc-second global population distribution based on ancillary datasets such as land cover, slope, proximity to roads, and settlement locations. This work will review the current state of the LandScan model, future innovations aimed at increasing spatial and demographic resolution, and situate LandScan within the landscape of other global population distribution datasets.

Rose, Amy N↗

SOLVING CONJUGATE HEAT TRANSFER PROBLEM IN TWO-PHASE FLOW USING NEWTON-KRYLOV METHOD

In this paper, we successfully demonstrated an application of the Jacobian-free Newton Krylov (JFNK) method in solving the conjugated two-phase channel flow and heat conduction problem, in a fully coupled and fully implicit manner. Such a problem represents the most fundamental piece of safety analysis codes, for example the heat transfer between fuel rods and reactor coolant during postulated accidental scenarios. The two-phase flow is modeled with the widely accepted one-dimensional two-fluid two-phase flow model, and the heat conduction is modeled with two-dimensional heat conduction model. The coupling between these two physics is realized through the wall heat transfer term in fluid equations and heat flux boundary conditions of heat conduction model. For spatial discretization, both the first-order and second- order upwind schemes are considered for flow equations, while the standard central differencing method is used for the heat conduction model. For time integration, both the first-order backward Euler (BDF1) and second-order BDF2 schemes are considered. Several treatments were also introduced to enhance the robustness of the JFNK method in solving such a problem that is discontinuous in nature because of the discrete closure correlations. These treatments include the re-introduction of a transition region between the slug and annular mist flow regimes, and a simplification in the interfacial drag term. Numerical results have been extensively validated with experimental data in both vertical pipe and rod bundle geometries with a wide range of thermal-hydraulics conditions, including pressure, inlet subcooling, wall heat flux, outlet void fraction, and etc. Further benchmark with the RELAP5-3D code confirms the correct implementation of wall heat transfer models.

42 ENGINEERING↗

Interactive Visualization of Multi-Group Cross Sections on High-Fidelity Spatial Meshes

Core simulation tools utilizing Monte Carlo transport methods represent the 'Holy Grail' for nuclear reactor analysis. However, deterministic transport methods pose a number of advantages to Monte Carlo from a computational perspective, which seems likely to make these methods more viable in the near to intermediate term. Deterministic methods almost universally discretize the energy domain in a few to hundreds of energy groups. One of the key challenges for deterministic transport-based methods to be viable is accurate, reactor agnostic multi-group cross section generation. This paper describes tools for data processing and visualization of multigroup cross sections generated on high-fidelity spatial meshes from the OpenMC Monte Carlo code. Next generation deterministic transport reactor core modeling tools will require multi-group cross section (MGXS) generation on high-fidelity spatial meshes. High-fidelity MGXS are necessary for the accurate simulation of neutron physics in nuclear reactors with a high degree of spectral heterogeneity - e.g., large localized neutron flux gradients throughout a reactor core. Although many local (e.g., pin cell) approximations have been developed to model the scalar flux to compute spectral-averaged MGXS, these techniques cannot account for complex intra-pin and intra-assembly spatial self-shielding effects. Monte Carlo presents the most accurate method for reactor agnostic multi-group cross section generation since it does not require the use of local approximations to the flux. Monte Carlo has been proposed as a highly desirable framework for reactor agnostic cross section generation for many years. Monte Carlo methods can effectively embed all of the relevant spectral effects into the MGXS through the random particle tracking and interaction sampling processes. Previous work has applied MCNP and Serpent to compute few-group constants for diffusion calculations, and OpenMC to compute multi-group cross sections for transport-based methods. The primary difficulty with using Monte Carlo for MGXS generation is the tremendous computational resources required to adequately converge multi-group cross sections in each spatial region and energy group. Recent development of the OpenMC Monte Carlo code for high-performance computing platforms has made multigroup cross section generation from Monte Carlo more tractable in the foreseeable future. The recent release of OpenMC v0.7.1 includes a new Python-based module for MGXS generation. The MGXS generation module leverages many of the algorithms and features for 'big data' analysis of large tally datasets on complex spatial meshes. This paper describes the data management workflow and visualization tools which have been developed to explore the plethora of MGXS data generated with OpenMC. It is the authors' hope that the development of the visualization tool described in this paper will ultimately enable the design of machine learning algorithms to accelerate the convergence rate of high-fidelity multi-group cross section generated with Monte Carlo. (authors)

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗