Search NASA⌕ Search

SEARCH · Search NASA

Results for “scope”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Common practices for quantifying methane emissions from plumes detected by remote sensing

This document provides a set of community-accepted practices for quantifying methane emissions based on plumes detected via spectroscopic remote sensing. Its primary goal is to promote consistency in the generation, validation, reporting, and quality assessment of methane emission estimates derived from remote sensing radiances. Developed by subject matter experts with deep experience across all stages of the measurement process, this guidance reflects a critical evaluation of current methodologies and highlights key practices needed to produce reliable, interoperable, and traceable products. The focus is specifically on methane emissions quantified from distinct plumes originating from localized sources, rather than diffuse emissions spread over large regions, which are beyond the scope of this work. This document is intended to serve both data producers and users. For producers, it offers a framework for aligning with field-recognized standards to ensure their outputs meet rigorous quality and transparency criteria. For users, it provides a reference to assess dataset fitness-for-purpose by highlighting essential metadata, assumptions, and methodological choices that underpin emission estimates. By fostering a shared understanding of best practices, this work aims to enhance comparability, confidence, and utility of remotely sensed methane emission products.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Advanced Perovskite Solar Cells and Modules

The “Advanced perovskite Cells and Modules” research project was the final agreement focused on enhancing perovskite solar cell (PSC) technologies funded by the US Department of Energy's Solar Energy Technologies Office. The project was designed to address three crucial areas in PSC development: stability, manufacturability, and efficiency. The project was then structured around three main tasks, each targeting one of these strategic goals. The team of experienced researchers in these materials worked collaboratively to address the targets outlined in the technical work plan. building on existing PSC research while also exploring promising new concepts arising in the field. An overview of each primary task is summarized below: Task 1 Stability: This first task, aims to identify material characteristics and metrics that can help predict the primary degradation mechanisms impacting PSC stability. This involved developing specific device tests based on hypotheses regarding mechanisms impacting stability, including fast failure procedures to speed up PSC development and improvement. Various strategies to enhance stability, like incorporating additives, post-treatments, novel contact materials etc. were developed using this fast feedback approach. The relationships between indoor and outdoor stresses were also validated. Task 2 Manufacturability: This second task, focused on creating a scalable production process for PSCs. Initially the objective is to establish a best-known method for a 182 cm2 minimodule. However, given resource limitations, these metrics were modified to focus on the other goal of outlined in the TWP. Specifically, this task worked to demonstrate the transferability of this best-known method to another research institution. Work scope in this area was expanded to material purity and understanding of reagent/process relationships. Examination of other difficulties in PSC production and potential solutions for large-scale production were also evaluated. Given challenges observed in process transfer, work to develop data infrastructure and recording tools for processing of material and devices was then also prioritized in this task. Task 3 Efficiency: This task was focused on improvements to PCE, while still considering Task 1 and Task 2 goal. The efforts targeted a PCE greater than 22% with a T95 exceeding 1000 hours at 25°C in a nitrogen environment for lab-scale devices (approximately 0.1 cm2 devices) across a range of solar-relevant perovskite compositions, including wide-gap (around 1.7 eV) and low-gap (around 1.3 eV) materials, using standard metal contacts. This work then provides a foundation for MHP-based tandem efforts undertaken in other projects and the All-MHP tandem efforts outlined in this projects TWP. Work in this project emphasized disseminating its findings through peer-reviewed publications (PRP), conference presentations, and industrial collaborations. Significant products were produced in all these areas, over 53 peer reviewed publications, 32 conference presentations and industrial investment based on NLR assistance on precompetitive challenges. The team also developed significant intellectual property and awards for their technical excellence, innovations and leadership. The team also leveraged traditional and social media platforms to engage with stakeholders and the public.

14 SOLAR ENERGY↗
DOE OSTI2026

Comparative Analysis of Two-Wheeled Mobility Options and Suitability for the U.S. Park Police

This report is a framework to help the United States Park Police in selecting and deploying various e-mobility options that are currently available in the market. In the process of creating this framework, we developed the Mobility Optimization and Deployment Engine (MODE) tool whose use could go beyond the scope of this work and mobility options.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2024

Recent Advances of PyROS: A Pyomo Solver for Nonconvex Two-Stage Robust Optimization in Process Systems Engineering

The document presents recent algorithmic and implementation advances of the two-stage robust optimization (RO) solver PyROS, and a benchmarking study which demonstrates the utility of PyROS for two-stage RO problems. The advances include extensions of the scope of PyROS to models with uncertain variable bounds, improvements to the initializations of the subproblems used by the underlying cutting set algorithm, and extensions of the uncertainty set interfaces. The benchmarking study is performed on a library of over 8,500 instances, with variations in the nonlinearities, degree-of-freedom partitioning, uncertainty sets, and polynomial decision rule approximations. An amine-based CO2 capture case study is presented to demonstrate the utility of PyROS for large-scale process models. Overall, the results highlight the effectiveness of PyROS for obtaining robust solutions to optimization problems with uncertain equality constraints.

Sherman, Jason↗
DOE OSTI2024

Role of Hydrogen as Fuel in Decarbonizing US Clinker Manufacturing for Cement Production: Costs and CO2 Emissions Reduction Potentials

As a low-carbon fuel, feedstock, and energy source, hydrogen is expected to play a vital role in the decarbonization of high-temperature process heat during the pyroprocessing steps of clinker production in cement manufacturing. However, to accurately assess its potential for reducing CO2 emissions and the associated costs in clinker production applications, a techno-economic analysis and a study of facility-level CO2 emissions are necessary. Assuming that up to 20% hydrogen can be blended in clinker fuel mix without significant changes in equipment configuration, this study evaluates the potential reduction in CO2 emissions (scopes 1 and 2) and cost implications when replacing current carbon-intensive fuels with hydrogen. Using the direct energy substitution method, we developed an Excel-based model of clinker production, considering different hydrogen–blend scenarios. Hydrogen from steam methane reformer (gray) and renewable-based electrolysis (green) are considered as sources of hydrogen fuel for blend scenarios of 5%–20%. Metrics such as the cost of cement production, facility-level CO2 emissions, and cost of CO2 avoided were computed. Results show that for hydrogen blends (gray or green) between 5% and 20%, the cost of cement increases by 0.6% to 16%, with only a 0.4% to 6% reduction in CO2 emissions. When the cost of CO2 avoided was computed, the extra cost required to reduce CO2 emissions is $229 to $358/ metric ton CO2. In summary, although green hydrogen shows promise as a low-carbon fuel, its adoption for decarbonizing clinker production is currently impeded by costs.

Okeke, Ikenna J.↗
DOE OSTI2025

PSTN-056: Survey Cadence Optimization Committee's Phase 3 Recommendations

We present the final planned comprehensive recommendation for Rubin Observatory the Legacy Survey of Space and Time (LSST) survey strategy ahead of the start of LSST. This recommendation is the product of a many-years-long iterative process where community recommendations to maximize the scientific impact of LSST across domains of astrophysics were reviewed, synthesized, aggregated, and merged to define the overall plan for 10 years of LSST observations. The current recommendation builds on Phase 1 (PSTN-053) and Phase 2 recommendations (PSTN-055) and, together, they define a 10-year plan for observing. Here we answer questions left open in PSTN-055, refine additional survey details, and describe the scope of future activities of the SCOC.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1962

Study of Umbrella-Type Erectable Paraboloidal Solar Concentrators for Generation of Spacecraft Auxiliary Power

An investigation was made of some aspects of erectable umbrella-type paraboloidal solar-energy concentrators for use in spacecraft auxiliary power systems. An analysis is presented for the design of concentrators employing radial ribs and membrane-type coverings. The rib stiffness necessary to give a desired parabolic curvature upon erection is determined. Rib contour measurements were made in an upright and inverted position on an experimental 10-foot-diameter concentrator giving a focal length of 30.78 inches and 30.6 inches, respectively, as compared with a design focal length of 30 inches. Calorimetric tests employing spherical heat receivers showed a maximum geometrical concentrator efficiency of 75.3 percent with a concentration ratio of 92.2 at a focal length of approximately 30.5 inches. Within the scope of this investigation, it was found that, as the concentrator size increases, the weight per unit projected area increases, time to damp to one-half amplitude increases, and the natural frequency decreases. Umbrella-type solar concentrators appear to be feasible for power conversion systems using low concentration ratios; however, for large concentrators the time required to damp out disturbances may be a problem.

SPACECRAFT↗
NASA NTRS1961

A Feasible Approach for an Early Manned Lunar Landing. Part II: Detailed Report of Ad Hoc Task Group

This report, in two parts, presents a program development plan for attempting a first manned lunar landing in 1967. The two parts consist of a Summary Report and a Detailed Report representing the coordinated output of the Ad Hoc Task Group assigned to the study. The study was started in response to the request for such a study by the Associate Administrator in his memorandum of May 2, 1961 establishing the Ad Hoc Task Group. The purpose of the study was to take a first cut at the tasks associated with the design, development and construction of the equipment and facilities as well as the development of the crews, and to show the time phasing 6f these tasks. Included are the space sciences, life science and advanced technology tasks whose data and results are needed for designing and developing the systems required in carrying out the mission. The plan presented in the two reports does not presume to be a firm plan. Its basic purpose is, by choosing one feasible method, to size up the scope, schedule and cost of the job, discover the main problems, pacing items and major decisions and provide a threshold from which a firm and detailed project development plan can be jointly formulated by the various elements of NASA.

Fleming, William A.↗
NASA NTRS1965

A slow-scan television film recorder.

Slow-scan television film recorder designed for Mariner Mars 1964 noting scope phosphors, film types and processing

PHOTOGRAPHIC RECORDING INSTRUMENT↗
NASA NTRS1966

A summary of recent large-scale research on high-lift devices

A brief summary of recent 40- by 80-foot wind-tunnel investigations of large-scale models equipped with various high-lift devices is presented. The basic high-lift concepts that were investigated were the externally blown flap, the augmentor wing, and the rotating-cylinder flap. The scope of this paper is limited to a discussion of the wind-tunnel results in terms of maximum lift, descent performance, and pitch trim requirements.

WING FLAP↗
NASA NTRS1964

Discussion of the General Electric proposal to develop a computer program to select thermal coatings for passive temperature control of satellites

The General Electric Company, Missiles and Space Division, submitted/a proposal to NASA for the development of an IBM 7094 computer program which would select the exterior surface coatings for passively controlling spacecraft temperatures. G. E. claims that the "trial and error" procedures currently used can be accomplished more rationally and can therefore be programmed for a digital computer. In the ASME paper, 63-HT-41, which was presented at the ASME-AIChE Heat Transfer Conference at Boston in August, 1963, Costello, Harper, and Cline, described the procedures that have been used at G. E. to develop a coating selection program subject to the following restrictions: 1. Steady-state conditions prevail, 2. Heat transfer occurs by radiation only, 3. Temperatures are optimized at only one interior point in the spacecraft, an d 4. Only the solar absorptance of the external coatings is varied to optimize temperature. The emittance must remain constant at initially specified values. General Electric proposes to develop a generalized program in three steps: 1. The program would vary both solar absorptance and hemispherical emittance to obtain the optimum coating patterns; 2. Temperatures would be optimized at more than one interior point; and 3. The equations would be modified to account for both conduction and radiation heat transfer. In the development of the general program, the scope would be restricted to steady-state heat transfer. Since the thermal designs of most spacecraft are based primarily on nearly equilibrium conditions, the proposed program could have wide application. An obvious extension of the proposed program would be to account for transient temperatures.

IBM 7090 COMPUTER↗
NASA NTRS1967

Oscilloscope used as X-Y plotter or two-dimensional analyzer

Oscilloscope used as an X-Y plotter or two-dimensional analyzer tags each point with a yes or no, depending on a third parameter. The usual square-wave pulse is replaced on the scope by a single information-bearing dot which lengthens to a dash in response to a simultaneous event.

Hansen, D.↗
NASA NTRS1966

Apollo network

Although the design of the Apollo network followed closely behind the Manned Space Flight Network (MSFN) modification for the Gemini program, many site modifications were necessary to provide Apollo support due to the greater scope of the Apollo program. The Apollo program requires instrumentation for support of the S-I, S-11, S IV-B/IU, Command Service Module (CSM) and Lunar Excursion Module (LEM) stages. Command Service Module (CSM) and Lunar Excursion Module (LEM) stages. Support must also be provided at both orbital and lunar distances. Increased data processing capability is required for processing and displaying significantly larger amounts of information. The ground network requires the capability of processing both Pulse Code Modulation (PCM) telemetry and command data for the CSM, LEM, and S IV-B/IU. In various stages of the Apollo program, both tone (on UHF) and digital [on Unified S-Band (USB) and UHF] command capabilities are required. Also at various stages both USB and VHF telemetry links are required.

Ground support system↗
NASA NTRS1967

Astronautics and Aeronautics, 1966

At the opening of the tenth year in the era of man’s mobility in outer space, we can look back on 1966 as offering convincing evidence that the United States had gained great competence. This evidence included: five orbital space flights by ten Gemini astronauts; four lunar missions undertaking the orbiting of and soft landing on the moon; numerous contributions to scientific knowledge by unmanned spacecraft and sounding rockets; and further demonstrations of the practical utility of operational space systems, including weather and communications satellites. During 1966, a record 100 American spacecraft were placed into earth orbit or on escape trajectories. Thousands of revealing and useful pictures of the earth were taken from space and of the moon from lunar orbit and on its surface. The Gemini program ended with rendezvous and docking experiments and extravehicular activity by the Gemini test pilots as the Apollo R&D test flights leading to the manned lunar mission came into the schedule. Thirty-five major scientific, technological, and operational milestones were cited for 1966 by the President in his Report to the Congress on aeronautical and space activities of the United States. This was one measure of the American commitment to share in the peaceful exploration of space for all mankind. Another was our support of the final steps toward a United Nations space treaty, undertaken to ensure that the peaceful exploitation of space had juridical basis in international law. Spectacular as some events in the space venture were in 1966, they nonetheless came to have diminished novelty in the eyes of many laymen. The multitude of both important and unspectacular space activities attained almost an accepted and routine place. This volume, as well as its predecessor chronicles, offers a ready reference on the major as well as the less-well known events. Beyond the welter of documented details on the complex nature of aeronautical and space related events and their impact, this volume helps to provide a better perspective upon today as we contemplate tomorrow. Such intent also serves future historians and analysts who cannot be unmindful of what is herein presented. When the Congress created the National Aeronautics and Space Administration in 1958, it charged NASA with the responsibility to “contribute materially to . . . the expansion of human knowledge of phenomena in the atmosphere and space’’ and to “provide for the widest practical and appropriate dissemination of information concerning its activities and results thereof.” NASA has attempted to do this and to include documentation for the historical record. The relating of NASA history begins with this day-by day chronicle and leads to more specialized studies and histories of the unprecedented task of extending man’s mobility and understanding beyond his planet. While a chronology cannot in itself serve as a full-fledged history, the size of this annual volume alone is illustrative of the scope and complexity of the historical task yet to be completed as memories fade and the records disappear.

SPACE PROBE↗
NASA NTRS1969

Proposed technique for vertical alignment of a crane's cable

Proposed vertical alignment technique senses the attitude of a cranes cable and displays any deviation from the vertical. The system consists of a detector assembly fixed to the boom and a display scope located in the cabin. It has potential application with either fixed-boom cranes or gantries.

Gera, J., Jr.↗