Search NASA⌕ Search

SEARCH · Search NASA

Results for “selection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

X-ray selected high redshift clusters of galaxies

Studies of the evolution of X-ray emission from clusters of galaxies have so far used distant clusters discovered optically and then observed at X-ray wavelengths (Henry et al., 1982; Henry and Lavery, 1984). A different approach to the study of cluster evolution is to use clusters selected directly by their X-ray emission, since X-ray selection is extremely successful at discovering high-redshift clusters (up to z = 0.5). The Extension of the Medium Sensitivity Survey, a study of serendipitous X-ray sources discovered with the Einstein Imaging Proportional Counter, has so far provided a sample of more than 60 clusters with relatively high redshifts. Upon completion of the identification programs the sample will include over 100 clusters. Here the data currently available are presented, and the basic properties of this new sample of clusters of galaxies are discussed. A preliminary number-counts distribution is also derived.

Gioia, Isabella M.↗
NASA NTRS1988

Ultraviolet properties of IRAS-selected Be stars

New IUE observations were obtained of 35 Be stars from a list of stars which show excess infrared fluxes in IRAS data. The IRAS-selected Be stars show larger C IV and Si IV equivalent widths than other Be stars. Excess C IV and Si IV absorption seems to be independent of spectral type for IRAS-selected Be stars later than spectral type B4. This is interpreted as evidence for a possible second mechanism acting in conjunction with radiation pressure for producing the winds in Be stars. No clear correlation of IR excess of v sin i with C IV or Si IV equivalent widths is seen, although a threshold for the occurrence of excess C IV and Si IV absorption appears at a v sin i of 150 km/sec.

Bjorkman, Karen S.↗
NASA NTRS1988

A catalog of small, optically selected molecular clouds - Optical, infrared, and millimeter properties

A catalog of small, optically selected molecular clouds is presented. The relevant selection criteria were small angular size, large central opacity, and freedom from connecting opaque material. The mean ellipticity of the clouds in the catalog is 2.0, with a maximum ellipticity of 7. The position angle of the clouds is uncorrelated with the direction of the Galactic plane. About 60 percent of the cataloged clouds have associated IRAS Point Source Catalog (PSC) sources in their cores or envelopes. The likelihood of a detection of a PSC source is some 6.1 times higher for the core regions of the clouds than for the envelopes, indicating a strong association of FIR sources and Bok globules. Of a sample of 97 of the clouds observed in the J = 2-1 line of (C-12)O, 70 percent have cold gas kinetic temperatures and approximately sonic line widths. The remaining 30 percent are about equally divided between those clouds likely to be radiatively heated by nearby stars and those undergoing active protostellar collapse or outflows with no bulk gas heating.

Clemens, Dan P.↗
NASA NTRS1989

A two-phase methodology for technology selection and system design

A two-phase methodology that can be used to guide R&D managers in the evaluation and selection of competing technologies is presented. Deterministic multiattribute utility theory is used in the first phase to rank the technological alternatives; the example presented involves the evaluation of electric and hybrid passenger vehicles. In all, 39 individuals from eight automotive firms were interviewed to assess their risk preferences and attitudes toward the vehicle design. In the second phase, the decision-maker must allocate a fixed amount of resources to different projects for the technology selected, some of which may be undertaken in parallel, to maximize a given measure of performance. When parallel funding is pursued the best outcome is chosen. The problem is formulated as a probabilistic network and solved heuristically using Monte Carlo simulation. Results are presented for two decision-makers and three budget options. In each case, the heuristic finds the optimal allocation of funds.

Bard, Jonathan F.↗
NASA NTRS1989

Selection of rolling-element bearing steels for long-life applications

Nearly four decades of research in bearing steel metallurgy and processing have resulted in improvements in bearing life by a factor of 100 over that obtained in the early 1940s. For critical applications such as aircraft, these improvements have resulted in longer lived, more reliable commercial aircraft engines. Material factors such as hardness, retained austenite, grain size and carbide size, number, and area can influence rolling-element fatigue life. Bearing steel processing such as double vacuum melting can have a greater effect on bearing life than material chemistry. The selection and specification of a bearing steel is dependent on the integration of all these considerations into the bearing design and application. The paper reviews rolling-element fatigue data and analysis which can enable the engineer or metallurgist to select a rolling-element bearing steel for critical applications where long life is required.

Zaretsky, Erwin V.↗
NASA NTRS1989

Analytic theory for the selection of Saffman-Taylor fingers in the presence of thin film effects

An analytic theory is presented for the width selection of Saffman-Taylor fingers in the presence of thin film effect. In the limit of small capillary number Ca and small gap to width ratio epsilon, such that epsilon much less than Ca much less than 1, it is found that fingers with relative width lambda less than 1/2 are possible such that lambda squared (1-lambda)/(1-2 lambda) = k epsilon/Ca(sup 3/2), where the positive constant k depends on the branch of solution and equals 2.776 for the first branch. A fully nonlinear analysis is necessary in this problem even to obtain the correct scaling law. It is also shown how in principle, the selection rule for arbitrary Ca can be obtained.

Tanveer, S.↗
NASA NTRS1990

Manual and computer-aided materials selection for industrial production: An exercise in decision making

Students are introduced to methods and concepts for systematic selection and evaluation of materials which are to be used to manufacture specific products in industry. For this laboratory exercise, students are asked to work in groups to identify and describe a product, then to proceed through the process to select a list of three candidates to make the item from. The exercise draws on knowledge of mechanical, physical, and chemical properties, common materials test techniques, and resource management skills in finding and assessing property data. A very important part of the exercise is the students' introduction to decision making algorithms, and learning how to apply them to a complex decision making process.

Bates, Seth P.↗
NASA NTRS1989

Weighted feature selection criteria for visual servoing of a telerobot

Because of the continually changing environment of a space station, visual feedback is a vital element of a telerobotic system. A real time visual servoing system would allow a telerobot to track and manipulate randomly moving objects. Methodologies for the automatic selection of image features to be used to visually control the relative position between an eye-in-hand telerobot and a known object are devised. A weighted criteria function with both image recognition and control components is used to select the combination of image features which provides the best control. Simulation and experimental results of a PUMA robot arm visually tracking a randomly moving carburetor gasket with a visual update time of 70 milliseconds are discussed.

Feddema, John T.↗
NASA NTRS1988

Spectroscopic observations of X-ray selected late type stars

A spectroscopic survey of nine X-ray selected late type stars was conducted. These stars are serendipitously discovered EINSTEIN X-ray sources, selected from two large x-ray surveys: the Columbia Astrophysical Laboratory survey (five stars) and the CFA Medium Sensitivity survey (four stars). Four of the Columbia survey stars were found to be short period binaries. The fifth was found to be an active single G dwarf. None of the Medium Sensitivity survey stars were found to be either binaries or active stars. Activity was measured by comparing the H-alpha and the CaII infrared triplet (8498, 8542) lines in these stars to the lines in inactive stars of similar spectral type. A correlation was found between the excess H-alpha lime emission and V sin(i) and between the excess H-alpha line emission and X-ray luminosity. No correlation was found between the infrared line emission and any other measured quantity.

Takalo, L. O.↗
NASA NTRS1990

H1722 + 119 - A highly polarized X-ray-selected BL Lacertae object

A 15th-mag, X-ray-selected BL Lac object, H1722 + 119, has been discovered to possess a steep X-ray spectrum with power-law energy index near 1.3; radio measurements indicate a variable, compact source with 1.4-4.9 GHz power-law energy index of 0.04. The optical-IR polarization of H1722 + 119 reaches a maximum of 17 percent, which is much higher than other X-ray-selected BL Lac objects. The degree of polarization is found to be wavelength-dependent, decreasing monotonically toward the IR.

Brissenden, R. J. V.↗
NASA NTRS1990

Selection of component modes for the simulation of flexible multibody spacecraft

This paper describes a procedure for the selection of component modes employed in discretization of component deformation in a flexible multibody spacecraft. The emphasis is placed on the selection of modes which adequately represent the interaction of the various on-board control systems with the vehicle structural flexibility. The method combines the component mode synthesis approaches of Craig-Bampton (1968), MacNeal (1971) and Rubin (1975), and Benfield-Hruda (1971) with the modal balancing method of Moore (1981) and Gregory (1984). The procedure, which is applicable to both articulating and nonarticulating systems, was used to develop a low-order model of the three-body articulating Galileo spacecraft.

Spanos, John T.↗
NASA NTRS1990

Engine selection for the Space Exploration Initiative

The process used by NASA in the selection of the engine for the Space Exploration Initiative mission is described. The major propulsion requirements of the engine are addressed along with the engine options and key drivers and trades. Special attention is given to the requirements of the propellant feed system and the reaction control system. As a result of the 90-study, four moderate chamber pressure expander-cycle oxygen/hydrogen engines with a thrust level of 20,000 lbf each were selected for the lunar transfer vehicle. The paper also presents results of architecture studies and of advanced engine test bed studies.

Jones, Lee W.↗
NASA NTRS1991

Preventing Chemical-Vapor Deposition In Selected Areas

Method for prevention of chemical-vapor deposition of material in selected areas developed. Gas shroud isolates specific area from rest of deposition system. Inert gas flowing from beneath substrate prevents deposition between substrate and outer ring. Method extremely successful in selective deposition of SiC in chemical-vapor-deposition reactor. Used in deposition of SiC mirror blanks in Large Mirror Substrate and Lidar Mirror programs. Critical element in overall chemical-vapor-deposition process for producing large, lightweight mirrors.

Keeley, Joseph T.↗
NASA NTRS1990

Role of orientation reference selection in motion sickness

Three areas related to human orientation control are investigated: (1) reflexes associated with the control of eye movements and posture; (2) the perception of body rotation and position with respect to gravity; and (3) the strategies used to resolve sensory conflict situations which arise when different sensory systems provide orientation cues which are not consistent with one another or with previous experience. Of particular interest is the possibility that a subject may be able to ignore an inaccurate sensory modality in favor of one or more other sensory modalities which do provide accurate orientation reference information. This process is referred as sensory selection. This proposal will attempt to quantify subject's sensory selection abilities and determine if this ability confers some immunity to the development of motion sickness symptoms.

Peterka, Robert J.↗
NASA NTRS1989

Grain mantles: The impact on grain evolution and selective extinction

Depletion studies are used to infer the presence of mantles and to constrain grain evolutionary models in the diffuse interstellar medium. The presence of these mantles appears to be important in the evolution of the grains inside diffuse as well as dense clouds. In dense clouds where the element-to-element abundances sometimes differ from those found in diffuse clouds, empirical relationships are starting to emerge between gas abundances and various types of peculiar selective extinction. These peculiar extinction curves may be the results of nonvolatile mantle formation on grain cores or may reflect chemical differences due to variations in the intrinsic metalicity from one cloud to another. A simple model of the time evolution of a parcel of gas and dust as observed by the depletion of two elements is presented. Different studies of grain evolution and selective extinction are discussed and compared.

Joseph, Charles L.↗
NASA NTRS1990

Galactic survey of interstellar abundances and selective extinction with IUE and IRAS

A progress report on the results of a survey of UV selective extinction curves using the International Ultraviolet Explorer (IUE) satellite is presented. From IUE high resolution spectra, UV selective extinction curves are derived. These are fitted to six parameters characterizing the grey extinction, the 2175 angstrom bump, and the far ultraviolet curvature. These parameters are compared to the results of previous surveys of interstellar metals and infrared Cirrus intensities. With IUE high resolution spectra, equivalent widths of 18 ultraviolet resonance transitions toward 273 early type stars are measured and column densities are derived. Using the Infrared Astronomy Satellite (IRAS) all sky survey, infrared Cirrus intensities at 12, 25, 60, and 100 microns are measured.

Vansteenberg, Michael E.↗
NASA NTRS1991

Effects of LDEF flight exposure on selected polymer matrix resin composite materials

The characterization of selected graphite fiber reinforced epoxy and polysulfone matrix resin composites which received exposure to the LEO environment on the LDEF is reported. The changes in mechanical properties of ultimate tensile strength and tensile modulus for exposed flight specimens are compared to the three sets of control specimens. Marked changes in surface appearance are discussed, and resin loss is reported. The chemical characterization including IR, thermal, and selected solution property measurements showed that the molecular structure of the polymeric matrix had not changed significantly in response to this exposure.

Slemp, Wayne S.↗
NASA NTRS1990

GPS time transfer with implementation of selective availability

The international community of time metrology is facing a major challenge with the Selective Availability (SA) degradation of GPS satellite signals. At present there are 6 Block 1 satellites and 8 Block 2 satellites operating. According to the policy of the U.S. Department of Defence the Block 1 satellite signals will not be degraded, but these satellites are old with a finite life. The Block 2 satellites, which have all been launched since 1988, were subject to Selective Availability from March 25, 1990. The effect of SA should be to limit precision to about 100 meters for navigation and 167 ns for timing. A study was conducted in order to understand the nature of the actual introduced degradation, and to elaborate the means of removing the effects of this degradation on time transfer. This study concerns the time extraction from GPS satellites at NIST, USNO and Paris Observatory, and the comparison of atomic clocks between these laboratories by common view approach. The results show that when using the data taken over several days the time extraction can be achieved with uncertainty of a few tens of nanoseconds, while strict common-view has removed entirely the effects of SA during the periods under study.

Allan, David W.↗