Search NASA⌕ Search

SEARCH · Search NASA

Results for “space utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

A Gaussian process based surrogate approach for the optimization of cylindrical targets

Simulating direct-drive inertial confinement experiments presents significant computational challenges, both due to the complexity of the codes required for such simulations and the substantial computational expense associated with target design studies. Machine learning models, and in particular, surrogate models, offer a solution by replacing simulation results with a simplified approximation. In this study, we apply surrogate modeling and optimization techniques that are well established in the existing literature to one-dimensional simulation data of a new cylindrical target design containing deuterium–tritium fuel. These models predict yields without the need for expensive simulations. We find that Bayesian optimization with Gaussian process surrogates enhances sampling efficiency in low-dimensional design spaces but becomes less efficient as dimensionality increases. Nonetheless, optimization routines within two-dimensional and five-dimensional design spaces can identify designs that maximize yield, while also aligning with established physical intuition. Optimization routines, which ignore constraints on hydrodynamic instability growth, are shown to lead to unstable designs in 2D, resulting in yield loss. However, routines that utilize 1D simulations and impose constraints on the in-flight aspect ratio converge on novel cylindrical target designs that are stable against hydrodynamic instability growth in 2D and achieve high yield.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

A Jacobian-free pseudo-arclength continuation method for phase transitions in inhomogeneous thermodynamic systems

Developing phase diagrams for inhomogeneous systems in thermodynamics is difficult, in part, due to the large phase space and the possibility of unstable and metastable solutions arising from first-order phase transitions. Pseudo-arclength continuation (PAC) is a method that allows one to trace out stable and unstable solutions of nonlinear systems. Typically, PAC utilizes the Jacobian in order to implement Newton (or quasi-Newton) steps. In this work, we present a Jacobian-free PAC method that is amenable to the usual workflows in inhomogeneous thermodynamics. We demonstrate our method in systems that have first-order phase transitions, including a novel example of polyelectrolyte complex coacervation in confinement, where multiple surface phase transitions occur and can overlap with one another.

Chemistry↗
DOE OSTI2022

Distinguishing Unique Earthquakes with Overlapping Signals in Oklahoma

Abstract During routine operations monitoring Oklahoma earthquakes, we found that certain earthquakes occurred closely both in space and time and had overlapping phases at the recording stations. Through further scrutiny and analysis, we determined that rather than being distinctly different earthquakes, some of the earthquakes exhibited multiphase arrivals and longer than expected coda due to unique ray paths that encounter impedance contrasts such as at the sedimentary rock-basement. Of course, some of these events truly were distinct events, which we term overlapping earthquakes, for which perceived coda duration overlaps and obscures the phase arrivals of the second event due to the source proximity in both time and space. We detail our classification scheme to separate the local earthquakes in Oklahoma as single, overlapping earthquakes, or those associated with multiphase arrivals. We forward model seismic wave propagation in a 2D crustal model and develop a methodology that utilizes waveform correlation to distinguish phases from overlapping earthquakes to those from crustal reverberations. Duration analysis shows a more elongated duration, qualitatively similar to the duration produced by overlapping earthquakes, at the sites where multiphase arrivals are observed.

Geochemistry & Geophysics↗
DOE OSTI2024

Cluster for Research Excellence (CRE) for Accelerator Physics

The purpose of this Cooperative Research and Development Agreement (CRADA) was to establish a Cluster of Research Excellence (CRE) for Accelerator Physics and broaden the accelerator physics collaboration between Northern Illinois University (NIU) and Fermilab. The CRE was based in both Fermilab’s Accelerator Division and in NIU’s Department of Physics. A research agenda and strategy for the CRE for Accelerator Physics included specific research topics, experiments, and research facility upgrades. The scope of the research program covered two thrusts with subtopics in the Accelerator Science Research Program utilizing the infrastructure of FAST, IOTA, the Fermilab Accelerator Complex, and the Illinois Accelerator Research Center (IARC). Specific areas of proposed exploration included: 1.Tests of novel “nonlinear integrable” systems including beam self-fields; 2.Experimental tests of phase-space diffusion and chaos in intense beams; 3.Investigate technically feasible approaches towards next generation intenseneutrino facilities; 4.Understanding optical control of charged particle beams; 5.Exploitation of bright electron beams from FAST for novel applications; 6. Conduct research into accelerator-based ‘precision science’, such as Muon g-2, EDM, Mu2e, etc.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Extended Tidal Tails of IC 4756 Detected by Gaia EDR3

We report the discovery of emerged tidal tails around open cluster IC 4756 (~1 Gyr) based on 644 members identified from Gaia EDR3. Three-dimensional spatial positions and two-dimensional tangential velocities (x,y,z,κ·μ{sub α}*/ϖ,κ·μ{sub δ}/ϖ) are utilized to determine the comoving member candidates of IC 4756. Using a Bayesian method, we correct the distance for each cluster member. Two tidal tails extend up to 180 pc and display an S shape in the X'Y' space (Cartesian coordinates focused on cluster center). A clean sequence of our members in the color–absolute–magnitude diagram indicates the coeval population and matches perfectly with the PARSEC isochrone with age from Bossini et al. Mass segregation is detected in this cluster as well. Finally, we derive the tidal radius and core radius of IC 4756 about 12.13 pc and 4.33 ± 0.75 pc, respectively.

42 ENGINEERING↗
DOE OSTI2026

Broadband hard X-ray attosecond pulses from extremely chirped electron beams

Attosecond pulses from free-electron lasers have opened the doors to atomic site-specific studies of bound electronic dynamics on their natural, sub-femtosecond timescales. Key to their success has been electron beam shaping techniques enabling the generation of sub-femtosecond current spikes with peak currents on the order of 10 kA. We demonstrate in an RF linac the generation of current spikes with extreme chirps on the order of 350 MeV/micron, directly competitive with the chirps expected from beam-driven plasma wakefield accelerators. Leveraging chirp-taper compensation, we use these highly chirped beams to generate hard X-ray attosecond pulses with bandwidths exceeding 30 eV, a factor of two beyond previous demonstrations. We simultaneously present the first explicit experimental evidence of chirp-taper compensation in an attosecond XFEL, finding that optimal tapering improves the bandwidth and pulse energy by factors of two and five, respectively, for our conditions. In addition to the immediate utility of such broadband hard X-ray pulses, electron beams with such extreme chirps can be utilized for unique new experimental modalities by performing further compression after the undulators. Such post-lasing compression can enable subsequent superradiant light emission at longer wavelengths, or direct excitation of quantum systems with the beam's intense space-charge field for unique attosecond pump-probe possibilities.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Scalable augmented enumeration and metadata operations for large filesystems

Systems, apparatus, and methods are disclosed for performing scalable operations in a file system. Metadata entries in a namespace or directory tree are sharded across multiple file metadata servers. An augmented enumeration operation, such as listing a directory, is parallelized across the multiple file metadata servers, transparently to clients. Exemplary augmentation features can include filtering and sorting. Augmentation features can be executed concurrently with enumeration, prior to enumeration, after enumeration, or as a combination of these, and can utilize pre-built index structures or holding structures for intermediate results. Augmented enumeration operations can also include no-output operations such as changing file attributes or deleting a file, and cumulative operations such as counting total disk space usage. The parallelization is compatible with tree-level parallelization and storage-level parallelization. Disclosed technologies can be applied to other fields requiring scalable enumeration, such as database and network applications.

Grider, Gary A.↗
DOE OSTI2020

Neural networks for modeling and control of particle accelerators

Charged particle accelerators support a wide variety of scientific, industrial, and medical applications. They range in scale and complexity from systems with just a few components for beam acceleration and manipulation, to large scientific user facilities that span many kilometers and have hundreds-to-thousands of individually-controllable components. Specific operational requirements must be met by adjusting the many controllable variables of the accelerator. Meeting these requirements can be challenging, both in terms of the ability to achieve specific beam quality metrics in a reliable fashion and in terms of the time needed to set up and maintain the optimal operating conditions. One avenue toward addressing this challenge is to incorporate techniques from the fields of machine learning (ML) and artificial intelligence (AI) into the way particle accelerators are modeled and controlled. While many promising approaches within AI/ML could be used for particle accelerators, this dissertation focuses on approaches based on neural networks. Neural networks are particularly well-suited to modeling, control, and diagnostic analysis of nonlinear systems, as well as systems with large parameter spaces. They are also very appealing for their ability to process high-dimensional data types, such as images and time series (both of which are ubiquitous in particle accelerators). In this work, key studies that demonstrated the potential utility of modern neural network-based approaches to modeling and control of particle accelerators are presented. The context for this work is important: at the start of this work in 2012, there was little interest in AI/ML in the particle accelerator community, and many of the advances in neural networks and deep learning that enabled its present success had not yet been made at that time. As such, this work was both an exploration of possible application areas and a generator of proof-of-concept demonstrations in these areas.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

A Review of Existing Test Methods for Occupancy Sensors

One of the key new features of connected lighting systems (CLS) is their ability to collect data from various types of integral sensors and share that data with other lighting or building systems. Occupancy and vacancy sensors have been widely adopted as an energy-saving strategy in buildings, yet published test methods for reproducibly characterizing their performance remain few and limited in their sophistication. As a result, it has been difficult to predict the performance of such sensors in a specific application, and in practice, they frequently do not meet energy-savings expectations. Occupants at times remove or otherwise bypass occupancy sensors that hinder their work or otherwise do not perform as expected, thereby compromising the sensors’ potential to reduce energy consumption. Poor performance can result from multiple causes – ranging from fundamental limitations of the sensor technology, to misconfiguration, to poor placement in the room or space. Innovative occupancy sensors, some of them combining multiple sensing technologies (i.e., multimodal), have come on the market over the years, with claims of improved performance compared to their predecessors. However, in practice, their performance has neither differed enough from the performance of previous products to necessitate a test method that facilitated comparison between them, nor has it led to high deployment or high user satisfaction in human-occupied spaces with persistent presence. While the performance of both common and novel occupancy sensors has been the subject of many published research articles, the test methods that have been employed for them typically have been loosely described and have incorporated custom equipment or techniques that render them difficult to reproduce, or have been limited in their ability to fairly characterize devices that utilize varying sensor technology. The lack of a fully described, technology-agnostic test method that yields reproducible results across different implementations has been a barrier to the commercial success of new occupancy-sensor products, as users and specifiers who have been disappointed with previous products are often unwilling to take a chance with new ones. Motivated by a desire to fairly characterize new technologies that continue to enter the market and claim not only improved occupancy detection but, in some cases, additional capabilities (e.g., the ability to measure traffic or discern between different object types), this report presents the results of a literature review of recently published fully described test methods for characterizing occupancy-sensor performance, as well as research articles containing ad-hoc test methods. The review also identifies and consolidates test conditions for characterizing sensor performance in indoor spaces and identifies apparent test method gaps that need to be filled in order to evaluate emerging technologies and products. The identified test-method conditions are intended to enable the development of a future technology-agnostic test method that facilitates occupancy-sensor performance characterization more-accurately representing performance in buildings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2025

Three-Receiver Quantum Broadcast Channels: Classical Communication with Quantum Non-unique Decoding

In network communication, it is common in broadcasting scenarios for there to exist a hierarchy among receivers based on information they decode due, for example, to different physical conditions or premium subscriptions. This hierarchy may result in varied information quality, such as higher-quality video for certain receivers. This is modeled mathematically as a degraded message set, indicating a hierarchy between messages to be decoded by different receivers, where the default quality corresponds to a common message intended for all receivers, a higher quality is represented by a message for a smaller subset of receivers, and so forth. We extend these considerations to quantum communication, exploring three-receiver quantum broadcast channels with two- and three-degraded message sets. Our technical tool involves employing quantum non-unique decoding, a technique we develop by utilizing the simultaneous pinching method. Here, we construct one-shot codes for various scenarios and find achievable rate regions relying on various quantum Rényi mutual information error exponents. Our investigation includes a comprehensive study of pinching across tensor product spaces, presenting our findings as the asymptotic counterpart to our one-shot codes. By employing the non-unique decoding, we also establish a simpler proof to Marton’s inner bound for two-receiver quantum broadcast channels without the need for more involved techniques. Additionally, we derive no-go results and demonstrate their tightness in special cases.

Salek, Farzin [Technical University of Munich (Ger↗
DOE OSTI2024

Theoretical modeling of a bottom-raised oscillating surge wave energy converter structural loadings and power performances

Here, this study presents theoretical formulations to evaluate the fundamental parameters and performance characteristics of a bottom-raised oscillating surge wave energy converter (OSWEC) device. Employing a flat plate assumption and potential flow formulation in elliptical coordinates, closed-form equations for the added mass, radiation damping, and excitation forces/torques in the relevant pitch-pitch and surge-pitch directions of motion are developed and used to calculate the system's response amplitude operator and the forces and moments acting on the foundation. The model is benchmarked against numerical simulations using WAMIT and WEC-Sim, showcasing excellent agreement. The sensitivity of plate thickness on the analytical hydrodynamic solutions is investigated over several thickness-to-width ratios ranging from 1:80 to 1:10. The results show that as the thickness of the benchmark OSWEC increases, the deviation of the analytical hydrodynamic coefficients from the numerical solutions grows from 3% to 25%. Differences in the excitation forces and torques, however, are contained within 12%. While the flat plate assumption is a limitation of the proposed analytical model, the error is within a reasonable margin for use in the design space exploration phase before a higher-fidelity (and thus more computationally expensive) model is employed. A parametric study demonstrates the ability of the analytical model to quickly sweep over a domain of OSWEC dimensions, illustrating the analytical model's utility in the early phases of design.

13 HYDRO ENERGY↗
DOE OSTI2022

Data-driven surrogate modeling of hPIC ion energy-angle distributions for high-dimensional sensitivity analysis of plasma parameters' uncertainty

In this work, we present a data-driven strategy for effective construction of a surrogate model in high-dimensional parameter space for the ion energy-angle distribution (IEAD) output of hPIC simulations of plasma-surface interactions. The methodology is based on a bin-by-bin least-squares fitting of the IEAD in the parameter space. The fitting is performed in a transformed coordinate system to normalize the IEAD, and it employs sparse grids for sampling the parameter space to overcome sampling challenges in high dimensions. The surrogate model is significantly cheaper computationally than direct hPIC simulations yet maintains high fidelity to them, providing a fast emulator for hPIC simulations. Sensitivity analysis based on the surrogate model is utilized to characterize the dependence of the ion impact angle and energy moments on the physical parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Kinetic modelling of an environmentally friendly carbamazepine synthesis via urea and iminostilbene in batch and continuous processes

Accurate kinetic models for reaction systems allow for improved process understanding and greater quality control, which is particularly beneficial as the pharmaceutical industry shifts from batch to continuous manufacturing (CM). In this work, a first principles kinetic model has been developed for the synthesis of carbamazepine (CBZ) from iminostilbene and urea, starting in a batch reactor and subsequently in a continuous flow reactor. An eco-friendly reaction pathway using urea was selected to avoid the toxic reagents that are typically used for synthesis of CBZ. The kinetic parameters determined from batch reactions were utilized in a MATLAB based kinetic model to simulate the yield for the continuous process. Overall, good agreement between the model prediction and corresponding experimental values was observed for the batch and continuous reaction systems within the full factorial design space. However, the model slightly overpredicted the yield of the continuous reaction system for higher conversion values (>60%) since it did not account for the reverse reaction that can occur at the studied reaction conditions. Here, the use of broken order kinetics was compared with whole number orders, and it was determined that the whole number orders resulted in better agreement at all conversion values for the continuous system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Combined molecular and spin dynamics simulation of BCC iron with vacancy defects

Utilizing an atomistic computational model, which handles both translational and spin degrees of freedom, combined molecular and spin dynamics simulations have been performed to investigate the effect of vacancy defects on spin wave excitations in ferromagnetic iron. Fourier transforms of space- and time-displaced correlation functions yield the dynamic structure factor, providing characteristic frequencies and lifetimes of the spin wave modes. A comparison of the system with a 5% vacancy concentration with pure lattice data shows a decrease in frequency and a decrease in lifetime for all transverse spin wave excitations observed. In addition, the clearly defined transverse spin wave excitations are distorted with the introduction of vacancy defects, and we observe reduced excitation lifetimes due to increased magnon–magnon scattering. We observe further evidence of increased magnon–magnon scattering, as the peaks in the longitudinal spin wave spectrum become less distinct. Finally, similar impacts are observed in the vibrational subsystem, with a decrease in characteristic phonon frequency and flattening of lattice excitation signals due to vacancy defects.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Exponential Improvements in the Simulation of Lattice Gauge Theories Using Near-Optimal Techniques

We report a first-of-its-kind analysis on post-Trotter simulation of U(1), SU(2), and SU(3) lattice gauge theories including fermions in arbitrary spatial dimension. We provide explicit circuit constructions as well as T-gate counts and logical qubit counts for Hamiltonian simulation. We find a reduction of up to 25 orders of magnitude in space-time volume over Trotter methods for simulations of non-Abelian lattice gauge theories relevant to the standard model. This improvement results from our algorithm having polynomial scaling with the number of colors in the gauge theory, achieved by utilizing oracle constructions relying on the sparsity of physical operators, in contrast to the exponential scaling seen in state-of-the-art Trotter methods, which employ explicit mappings onto Pauli operators. Our work demonstrates that the use of advanced algorithmic techniques leads to dramatic reductions in the cost of simulating fundamental interactions, bringing it in step with resources required for first-principles quantum simulation of chemistry.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Compact Multicell SRF Crab Cavity for ILC

International Linear Collider (ILC), a proposed linear electron-positron collider, plans to utilize crab cavities to enhance its luminosity. By introducing a transverse kick to the beams, the crab cavities (CC) rotate the beam bunches, allowing for increased overlap at the interaction points. High intensity of the beam current and limited transverse space along the beam pipe near the interaction point resulted in choosing superconducting technology for the ILC/CC. We present a scalable design of a superconducting Quasi-waveguide Multicell Resonator (QMiR) seamlessly connected with a beam vacuum chamber. The cavity is completely open at both ends, which avoids complex HOM couplers, and thus simplifies the mechanical design of the cavity.

Lunin, A.↗
DOE OSTI2025

Technical Background and Validation Report on the Residential Water Inhalation Risk Calculator Presented in the Risk Assessment Information System

Indoor air quality (IAQ) is critical for human health. Poor IAQ is linked to respiratory issues, cardiovascular diseases, and cancer. Indoor pollutants are emitted by typical household items such as cleaning products, personal care items, building materials, and tap water - an understudied volatile organic compound (VOC) source. This document presents the Residential Water Inhalation Risk Calculator (RWIRC), which estimates daily VOC exposure concentrations from various household water uses, such as showering and dishwashing, to assess exposure risks for the most vulnerable occupant. Integrated into the Risk Assessment Information System (RAIS) and sponsored by the US Department of Energy (DOE), the calculator divides a house into three compartments: shower, bathroom, and other spaces, accounting for daily water usage patterns and calculating VOC concentrations. Exposure data generated using the calculator can assist health assessors in estimating excess lifetime cancer risk (ELCR) and hazard index (HI) from VOC inhalation. Unlike traditional exposure models that utilize Andelman’s constant, the RWIRC continuously assesses variability in VOC concentrations and environmental conditions using differential equations to track VOC concentrations and air exchange between compartments. The calculator also provides unique volatilization fractions for each chemical and appliance, enhancing accuracy of the exposure concentration estimation. The RWIRC is accessible online and allows users to customize parameters (i.e., number of bathrooms, water temperature, and exhaust fan conditions) and input VOC characteristics (i.e., tap water and ambient air concentrations). This document provides a step-by-step guide on implementing the calculator. It also provides comparisons with the ATSDR-SHOWER calculator, using eight VOCs with varying physicochemical properties to reveal differences in algorithms and output concentrations. Simulations also assess how bathroom door positions and exhaust fan usage affect VOC exposure. The calculator results can enhance EPA risk screening levels for inhalation exposure to VOCs from tap water, offering a sophisticated tool for assessing inhalation risks and improving public health protection.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2026

Geothermal Direct-Use Applications for the District Energy System in Bucharest, Romania

The city of Bucharest, Romania, hosts the second-largest district energy system (DES) in the world. Geothermal resources can be considered as a supplementary heat source to support the demand for domestic hot water and space heating in the winter and shoulder seasons. The National Laboratory of the Rockies (NLR) has conducted a study that considers geothermal energy to serve a fraction of the existing district heating network operated by Electrocentrale Bucure?ti (ELCEN), the utility operating the DES. Lower Cretaceous and Jurassic limestones make up the main geothermal aquifer underlying Bucharest, which hosts temperatures suitable for district heating (up to 90 degrees C to the north of the city). Anomalous geothermal gradients have been observed to the north of the city, where a pumped well has produced 82 degrees C brine at the wellhead to feed the Therme Bucharest Spa. An anomalous gradient has also been reported to the southeast of the city (35 degrees C/km). NLR modeled the building heating loads of a small portion of the DES (a block of nine prototypical buildings) in its Urban Renewable Building and Neighborhood Optimization (URBANopt ) platform. To simulate meeting a baseload benchmark of 20 MWth deliverable to a small portion of the DES, the NLR team used GEOPHIRES to model production scenarios for (1) hydrothermal systems coupled with heat pumps targeting the main geothermal aquifer in the north, (2) enhanced geothermal systems targeting hot dry rock in the southeast, and (3) huff-and-puff systems targeting a gradient of 25 degrees C/km. Finally, NLR conducted a high-level sensitivity study around the techno-economics of these systems. The outcomes of this work indicate that hot dry rock geothermal resources that can deliver at least 90 degrees C hot water to the Geothermal District Energy System (GeoDES) offer a possible solution for supplemental geothermal heat delivered to the existing DES.

15 GEOTHERMAL ENERGY↗