Search NASA⌕ Search

SEARCH · Search NASA

Results for “spintronics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Toward a better understanding of the magnetocaloric effect: An experimental and theoretical study of MnFe{sub 4}Si{sub 3}

The intermetallic compound MnFe{sub 4}Si{sub 3} has been studied by high-resolution Time of Flight (TOF) neutron powder diffraction. MnFe{sub 4}Si{sub 3} crystallizes in the hexagonal space group P6{sub 3}/mcm with lattice constants of a=b=6.8043(4) Å and c=4.7254(2) Å at 310 K. Magnetic susceptibility measurements show clearly the magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. Magnetic structure refinements based on neutron powder diffraction data with and without external magnetic field reveal strong evidence on the origin of the large magnetocaloric effect (MCE) in this material as a partial reordering of the spins between ∼270 K and 300 K. In addition, electronic structure calculations using the self-consistent, spin-polarized Tight Binding-Linear MuffinTin Orbital (TB-LMTO) method were also accomplished to address the “coloring problem” (Mn/Fe site preference) as well as the unique ferromagnetic behavior of this intermetallic compound. - Graphical abstract: Theoretical and experimental reinvestigation of the magnetic structure of MnFe{sub 4}Si{sub 3} for a better understanding of its large magnetocaloric effect (MCE). - Highlights: • Strong magnetic transition from paramagnetism to ferromagnetism at about 302(2) K. • MCE associated to a partial reordering of the spins between ∼270 K and 300 K. • DFT calculations show strong relation between MCE and spintronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ab-initio study of electronic structure and magnetic properties of half-metallic Fe{sub 2}Mn{sub 1−x}V{sub x}Si{sub 0.5}Al{sub 0.5} alloys

Ab-initio electronic structure calculations are carried out for quinternary Fe{sub 2}Mn{sub 1−x}V{sub x}Si{sub 0.5}Al{sub 0.5} alloys. When x=0 the alloy is half-metallic ferromagnet, with magnetic moment following the Slater–Pauling rule. Replacement of Mn by V, changes its electronic and magnetic structure. V-doped alloys exhibit half-metallic behavior for x≤0.25. However, even for higher V concentrations, electronic spin polarization is still very high, what makes the alloys interesting for spintronic applications. - Graphical abstract: Densities of states of Fe{sub 2}MnSi{sub 0.5}Al{sub 0.5} and magnetic moments of Fe{sub 2}Mn{sub 1−x}V{sub x}Si{sub 0.5}Al{sub 0.5}. - Highlights: • Fe{sub 2}MnSi{sub 0.5}Al{sub 0.5} is a half-metallic ferromagnet with a minority band gap of 0.49 eV. • Half-metallic band gap is very stable against the change of the lattice parameter. • Half-metallic band gap is obtained for Fe{sub 2}Mn{sub 1−x}V{sub x}Si{sub 0.5}Al{sub 0.5} for x≤0.25. • Electronic spin polarization is very high and equal to at least 95% for x≤0.625. • The main carrier of magnetism of the compound is manganese.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

First-principles study on the ferrimagnetic half-metallic Mn{sub 2}FeAs alloy

Mn-based full-Heusler alloys are kinds of promising candidates for new half-metallic materials. Basing on first principles, the electronic structures and magnetic properties of the Mn{sub 2}FeAs full-Heusler alloy have been investigated in detail. The Hg{sub 2}CuTi-type Mn{sub 2}FeAs compound obeys the Slater-Pauling rule, while the anti-parallel alignment atomic magnetic moments of Mn locating at different sites indicate it a ferrimagnetic alloy. The calculated spin-down bands behave half-metallic character, exhibiting a direct gap of 0.46 eV with a 100% spin polarization at the Fermi level. More studies show the compound would maintain half-metallic nature in a large range of variational lattice constants. We expect that our calculated results may trigger Mn{sub 2}FeAs applying in the future spintronics field. - Graphical abstract: The d orbitals of Mn and Fe atoms split into multi-degenerated levels which create new bonding and nonbonding states. These exchange splitting shift the Fermi level to origin band gap.▪ - Highlights: • The electronic structure and magnetic properties of Mn{sub 2}FeAs full-Heusler alloy were studied. • A total magnetic moment of 3μ{sub B} was obtained for Mn{sub 2}FeAs alloy, following the SP rule M{sub t}=Z{sub t}−24. • The origin of ferrimagnetism and half-metallic character in Mn{sub 2}FeAs were discussed.

36 MATERIALS SCIENCE↗

Structural, electronic and magnetic properties of carbon doped boron nitride nanowire: Ab initio study

Using spin-polarized density functional theory calculations, we demonstrated that carbon doped boron nitride nanowire (C-doped BNNW) has diverse electronic and magnetic properties depending on position of carbon atoms and their percentages. Our results show that only when one carbon atom is situated on the edge of the nanowire, C-doped BNNW is transformed into half-metal. The calculated electronic structure of the C-doped BNNW suggests that doping carbon can induce localized edge states around the Fermi level, and the interaction among localized edge states leads to semiconductor to half-metal transition. Overall, the bond reconstruction causes of appearance of different electronic behavior such as semiconducting, half-metallicity, nonmagnetic metallic, and ferromagnetic metallic characters. The formation energy of the system shows that when a C atom is doped on surface boron site, system is more stable than the other positions of carbon impurity. Our calculations show that C-doped BNNW may offer unique opportunities for developing nanoscale spintronic materials.

36 MATERIALS SCIENCE↗

Compositional analysis and depth profiling of thin film CrO{sub 2} by heavy ion ERDA and standard RBS: a comparison

Chromium dioxide (CrO{sub 2}) thin film has generated considerable interest in applied research due to the wide variety of its technological applications. It has been extensively investigated in recent years, attracting the attention of researchers working on spintronic heterostructures and in the magnetic recording industry. However, its synthesis is usually a difficult task due to its metastable nature and various synthesis techniques are being investigated. In this work a polycrystalline thin film of CrO{sub 2} was prepared by electron beam vaporization of Cr{sub 2}O{sub 3} onto a Si substrate. The polycrystalline structure was confirmed through XRD analysis. The stoichiometry and elemental depth distribution of the deposited film were measured by ion beam nuclear analytical techniques heavy ion elastic recoil detection analysis (ERDA) and Rutherford backscattering spectrometry (RBS), which both have relative advantage over non-nuclear spectrometries in that they can readily provide quantitative information about the concentration and distribution of different atomic species in a layer. Moreover, the analysis carried out highlights the importance of complementary usage of the two techniques to obtain a more complete description of elemental content and depth distribution in thin films. - Graphical abstract: Heavy ion elastic recoil detection analysis (ERDA) and Rutherford backscattering spectrometry (RBS) both have relative advantage over non-nuclear spectrometries in that they can readily provide quantitative information about the concentration and distribution of different atomic species in a layer. Highlights: Black-Right-Pointing-Pointer Thin films of CrO{sub 2} have been grown by e-beam evaporation of Cr{sub 2}O{sub 3} target in vacuum. Black-Right-Pointing-Pointer The composition was determined by heavy ion-ERDA and RBS. Black-Right-Pointing-Pointer HI-ERDA and RBS provided information on the light and heavy elements, respectively.

36 MATERIALS SCIENCE↗

Ingeniously enhanced ferromagnetism in chemically-reduced 2D Ti 3 C 2 T X MXene

Chemical reduction is a facile and cost-effective technique for the modulation of the physical and chemical properties of nanomaterials. In this work, we demonstrate an enhancement of the magnetic behavior of Ti 3 C 2 T x MXene after its chemical reduction via l-ascorbic acid treatment. Small ferromagnetic loops have been observed below 50 K for Ti 3 C 2 T x prepared by hydrofluoric acid (HF) etching of Al layers from Ti 3 AlC 2 . Such a ferromagnetic ordering of spins was significantly enhanced via a chemical reduction of Ti 3 C 2 T x with l-ascorbic acid. Ferromagnetic hysteresis loops were observed for reduced Ti 3 C 2 T x (r-Ti 3 C 2 T x ) up to 150 K indicating a significant upshift of the paramagnetic to the ferromagnetic transition temperature, pushing towards room temperature. The enhancement of ferromagnetism and upshift of the ferromagnetic transition temperature could be attributed to the localized unpaired electron in Ti-3d orbital of the r-Ti 3 C 2 T x crystal and increase in the number of unsaturated Ti atoms upon l-ascorbic acid treatment. Chemical reduction via l-ascorbic acid treatment shows a promising pathway towards the modulation and enhancement of magnetism in various MXene materials for the development of 2D metallic soft ferromagnets and spintronic devices.

36 MATERIALS SCIENCE↗

Effect of annealing atmosphere on phase formation and electrical characteristics of bismuth ferrite thin films

Bismuth ferrite thin films were deposited on Pt/Ti/SiO{sub 2}/Si substrates by a soft chemical method and spin-coating technique. The effect of annealing atmosphere (air, N{sub 2} and O{sub 2}) on the structure and electrical properties of the films are reported. X-ray diffraction analysis reveals that the film annealed in air atmosphere is a single-phase perovskite structure. The films annealed in air showed better crystallinity and the presence of a single BFO phase leading to lower leakage current density and superior ferroelectric hysteresis loops at room temperature. In this way, we reveal that BFO film crystallized in air atmosphere by the soft chemical method can be useful for practical applications, including nonvolatile digital memories, spintronics and data-storage media.

36 MATERIALS SCIENCE↗

Fe{sub 3}O{sub 4} and CdS based bifunctional core–shell nanostructure

Highlights: ► First report on a room temperature aqueous process for growth of a hybrid core shell nanostructure containing a magnetic core and a semiconducting shell. ► Formation of distinct core shell nanostructure revealed by high resolution transmission electron microscopy. ► A bifunctional nature combining magnetic as well as photoresponce for the as synthesised core shell nanostructures demonstrated. ► A tendency towards self organisation of the core–shell nanostructure. ► Possible applications including purification and isolation of biological materials, drug delivery system, bio-labels, spintronics, etc. -- Abstract: A room temperature solution process for synthesis of Fe{sub 3}O{sub 4} nanoparticles and their hybrid core shell nanostructures using CdS as the shell material has been described. The as grown particles have been characterised using XRD, Rietveld refinement, high resolution transmission electron microscopy, atomic force microscopy, superconducting quantum interference device, optical absorbance and photoluminescence spectroscopy. A superparamagnetic response revealed from the magnetisation measurements of the as synthesised magnetite nanoparticles was retained even after the growth of the CdS shell. From luminescence and high resolution atomic force microscopy measurements, it is shown that the core–shell structures advantageously combine magnetic as well as fluorescence response with a tendency towards self-organization.

36 MATERIALS SCIENCE↗

Quantum filter of spin polarized states: Metal–dielectric–ferromagnetic/semiconductor device

Highlights: • Development of a new spintronics device. • Development of quantum spin polarized filters. • Development of theory of quantum spin polarized filter. - Abstract: Recently we proposed a model for the Quantum Spin-Polarized State Filter (QSPSF). The magnetic moments are transported selectively in this model, detached from the electric charge carriers. Thus, transfer of a spin-polarized state between two conductors was predicted in a system of two levels coupled by exchange interaction. The strength of the exchange interaction between the two conductive layers depends on the thickness of the dielectric layer separating them. External magnetic fields modulate spin-polarized state transfer, due to Zeeman level shift. Therefore, a linearly growing magnetic field generates a series of current peaks in a nearby coil. Thus, our spin-state filter should contain as least three nanolayers: (1) conductive or ferromagnetic; (2) dielectric; and (3) conductive or semiconductive. The spectrum of spin-polarized states generated by the filter device consists of a series of resonance peaks. In a simple case the number of lines equals S, the total spin angular momentum of discrete states in one of the coupled nanolayers. Presently we report spin-polarized state transport in metal–dielectric–ferromagnetic (MDF) and metal–dielectric–semiconductor (MDS) three-layer sandwich devices. The exchange-resonance spectra in such devices are quite specific, differing also from spectra observed earlier in other three-layer devices. The theoretical model is used to interpret the available experimental results. A detailed ab initio analysis of the magnetic-field dependence of the output magnetic moment averaged over the surface of the device was carried out. The model predicts the resonance structure of the signal, although at its present accuracy it cannot predict the positions of the spectral peaks.

36 MATERIALS SCIENCE↗

Weak ferromagnetism and temperature dependent dielectric properties of Zn{sub 0.9}Ni{sub 0.1}O diluted magnetic semiconductor

Highlights: • Single phase wurtzite structure was confirmed from XRD analysis. • Weak ferromagnetic behaviour at room temperature. • Pure semiconducting properties confirmed from temperature dependent conductivity. • Smaller dielectric properties at higher frequency. • Possible potential application in high frequency spintronic devices. - Abstract: In this study the room temperature ferromagnetic behaviour and dielectric properties of ZnO based diluted magnetic semiconductor (DMS) have been investigated using nominal chemical composition Zn{sub 0.9}Ni{sub 0.1}O. The X-ray diffraction analysis confirmed formation of single phase hexagonal wurtzite structure. An increase in grain size with increasing sintering temperature was observed from scanning electron microscopy. Field dependent DC magnetization values indicated dominant paramagnetic ordering along with a slight ferromagnetic behaviour at room temperature. Frequency dependent complex initial permeability showed some positive values around 12 at room temperature. In dielectric measurement, an increasing trend of complex permittivity, loss tangent and ac conductivity with increasing temperature were observed. The temperature dependent dispersion curves of dielectric properties revealed clear relaxation at higher temperature. Frequency dependent ac conductivity was found to increase with frequency whereas complex permittivity and loss tangent showed an opposite trend.

36 MATERIALS SCIENCE↗

Spin polarized state filter based on semiconductor–dielectric–iron–semiconductor multi-nanolayer device

Highlights: • Development of a new spintronics device. • Development of quantum spin polarized filters. • Development of theory of quantum spin polarized filter. - Abstract: Presently we report spin-polarized state transport in semiconductor–dielectric–iron–semiconductor (SDIS) four-nanolayer sandwich devices. The exchange-resonance spectra in such devices are quite specific, differing also from spectra observed earlier in other three-nanolayer devices. The theoretical model developed earlier is extended and used to interpret the available experimental results. A detailed ab initio analysis of the magnetic-field dependence of the output magnetic moment is also performed. The model predicts an exchange spectrum comprising a series of peaks, with the spectral structure determined by several factors, discussed in the paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study on the bulk and (1 1 1) surface half-metallicity of KS and RbS in CsCl structure

Graphical abstract: Spin-polarized total and atomic DOS at S-(1 1 1) terminated slab and bulk in CsCl-type RbS. - Highlights: • The half metallic properties of CsCl-type RbS and KS have been studied. • The RbS's and KS's (1 1 1) slabs have been investigated. • Surface energy of RbS's and KS's (1 1 1) slabs are calculated. - Abstract: The electronic and magnetic properties of RbS and KS in CsCl structure have been investigated by using the full-potential local-orbital minimum-basis method. Calculating the relation between the total energies and lattice parameters for RbS and KS, we find out that the equilibrium lattice parameters are 4.02 Å and 3.84 Å for RbS and KS, respectively. According to our calculations in generalized gradient approximation approximation, both RbS and KS are half-metallic ferromagnets with the magnetic moments of 1 μ{sub B} per formula unit, and band gap of 4.287 eV for RbS and 4.395 eV for KS. We also have studied the electronic and magnetic properties of (1 1 1) surfaces of RbS and KS, and have found out that the half-metallicity of their bulk is preserved in all of those surfaces. Finally, through the calculations of formation energy of RbS and KS, it is found that their thin films are stable in the equilibrium conditions, and the Rb-terminated (1 1 1) slab of RbS and the K-terminated (1 1 1) slab of KS are more stable than their S-terminated (1 1 1) slabs. All of the above properties lead the compounds of RbS and KS in CsCl structure to be promising candidates for spintronic applications.

36 MATERIALS SCIENCE↗

Spin-anticrossing effects in Co–SiO{sub 2}–Fe and ZnO–SiO{sub 2}–CuO three-nanolayer devices

Highlights: • Development of a new spintronic device. • Development of spin anticrossing spectroscopy of nanolayers. • Development of theory of quantum spin-polarized filter. - Abstract: Presently we report measurements of the spin-anticrossing spectra in the Co–SiO{sub 2}–Fe and ZnO–SiO{sub 2}–CuO three-nanolayer sandwich structures. The spin-anticrossing spectra in these systems are quite specific, differing from those observed earlier in other similar structures built of different materials. The theoretical model developed earlier is extended and used to interpret the available experimental results. A detailed ab initio analysis of the magnetic-field dependence of the output magnetic moment is also performed. The model predicts a spin-anticrossing spectrum comprising a series of peaks, with the spectral structure determined by several factors, discussed in the paper.

36 MATERIALS SCIENCE↗

Systematic DFT study of the impact of anionic variations on the physical properties of Cd1-xMnxX (XS, Se, Te; x = 6.25%)

Highlights: • The structural and electronic properties are investigated with most accurate mBJ potential. • The FM state stability is illustrated for Cd{sub 0.9375}Mn{sub 0.0625}S/Se/Te DMSs. • The FM semiconducting nature depicts potential applications in magneto-optic applications. • The absorption shifts within the visible range with S to Te variation that is verified by E{sub g}. • Thermoelectric properties indicate dominant hole-carriers and suitability at high temperatures. - Abstract: The structural and electronic properties are theoretically investigated for Cd{sub 1-x}Mn{sub x}X (XS, Se, Te; x = 6.25%) diluted magnetic semiconductors, which are further employed for extracting the magnetic, optical and thermoelectric properties using modified-Becke-Johnson (mBJ) potential. Ferromagnetic state stability is confirmed through the computed enthalpy of formation and the cohesive energies. The electronic properties elucidate Cd{sub 1-x}Mn{sub x}X (XS, Se, Te; x = 6.25%) as ferromagnetic semiconductors because both spin channels have Fermi energy level (E{sub F}) within the band gap, depicting potential applications in spintronic devices. The calculated optical response indicates shifts in the absorption within the visible energy that is consistent with the computed direct band gap values (1.9 eV–3.1 eV). Thermoelectric properties observed within 200 K–800 K show positive Seebeck coefficient indicating holes as majority charge carriers. Although Mn-doping suppresses the power factor, however, it improves with temperature, showing a potential for optimizing the thermoelectric performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Proximitized materials

Advances in scaling down heterostructures and having an improved interface quality together with atomically thin two-dimensional materials suggest a novel approach to systematically design materials. A given material can be transformed through proximity effects whereby it acquires properties of its neighbors, for example, becoming superconducting, magnetic, topologically nontrivial, or with an enhanced spin–orbit coupling. Such proximity effects not only complement the conventional methods of designing materials by doping or functionalization but also can overcome their various limitations. In proximitized materials, it is possible to realize properties that are not present in any constituent region of the considered heterostructure. While the focus is on magnetic and spin–orbit proximity effects with their applications in spintronics, the outlined principles also provide a broader framework for employing other proximity effects to tailor materials and realize novel phenomena.

36 MATERIALS SCIENCE↗

Epitaxial exchange-bias systems: From fundamentals to future spin-orbitronics

Exchange bias has been investigated for more than half a century and several insightful reviews, published around the year 2000, have already summarized many key experimental and theoretical aspects related to this phenomenon. Since then, due to developments in thin-film fabrication and sophisticated characterization methods, exchange bias continues to show substantial advances; in particular, recent studies on epitaxial systems, which is the focus of this review, allow many long-standing mysteries of exchange bias to be unambiguously resolved. The advantage of epitaxial samples lies in the well-defined interface structures, larger coherence lengths, and competing magnetic anisotropies, which are often negligible in polycrystalline samples. Beginning with a discussion of the microscopic spin properties at the ferromagnetic/antiferromagnetic interface, we correlate the details of spin lattices with phenomenological anisotropies, and finally connect the two by introducing realistic measurement approaches and models. We conclude by providing a brief perspective on the future of exchange bias and related studies in the context of the rapidly evolving interest in antiferromagnetic spintronics.

36 MATERIALS SCIENCE↗

Tunable, room-temperature multiferroic Fe-BaTiO 3 vertically aligned nanocomposites with perpendicular magnetic anisotropy

Room-temperature ferromagnetic materials with perpendicular magnetic anisotropy are widely sought after for spintronics, magnetic data storage devices, and stochastic computing. To address this need, a new Fe-BaTiO 3 vertically aligned nanocomposite (VAN) has been fabricated—combining both the strong room-temperature ferromagnetic properties of Fe nanopillars and the strong room-temperature ferroelectric properties of the BaTiO 3 matrix. Furthermore, the Fe-BaTiO 3 VAN allows for highly anisotropic magnetic properties with tunable magnetization and coercivity. Additionally, to demonstrate the multiferroic properties of the Fe-BaTiO 3 system, the new metal-oxide hybrid material system has been incorporated in a multilayer stack. Overall, this new multiferroic VAN system possesses great potential in magnetic anisotropy and property tuning and demonstrates a new material family of oxide-metal hybrid systems for room-temperature multiferroic material designs.

36 MATERIALS SCIENCE↗

Anisotropic topological surface states in thin-film monoclinic Ag 2 Se

Silver chalcogenide systems have recently attracted significant attention due to their promising topological insulating properties. Here we conducted systematic low-temperature local scanning tunneling microscopy/spectroscopy and first-principles studies on the surface states of monoclinic Ag 2 Se thin films grown using molecular beam epitaxy. Through the use of quasi-particle interference patterns, we have observed evidence for topological surface states on the selenium-terminated surfaces with different types of defect densities. The results of ab initio calculations confirm the existence of nontrivial topological surface states in the monoclinic Ag 2 Se structure, for which such properties have not been previously reported. The energy dispersion determined using voltage-dependent standing wave patterns suggests that these topological states have an anisotropic Dirac cone structure. In conclusion, this discovery may lead to new applications for monoclinic Ag 2 Se in the rapidly growing fields of nanoelectronics and spintronics.

36 MATERIALS SCIENCE↗