SEARCH · Search NASA
Results for “study”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Surface acetone reactions on ZnxZryOz: A DRIFTS-MS study
We report a systematic DRIFTS-MS study of surface acetone aldolization and self-deoxygenation reactions on ZrO2 and Zn1Zr10Oz, using temperature programmed surface reactions of both acetone reactant and possible intermediate compounds including diacetone alcohol, mesityl oxide, phorone, and isophorone. DRIFTS was used to monitor the evolution of surface species while MS was used to track corresponding gas phase products, in an attempt to identify the distinct reaction pathways observed on the two catalysts as well as the role zinc plays in the corresponding reaction pathways. It is found that aldol condensation (or aldolization) of acetone occurs readily at low temperature (298?K), forming mainly acetone dimers (i.e., diacetone alcohol, DAA/mesityl oxide, MSO) on both ZrO2 and Zn1Zr10Oz with the latter being more active. At elevated temperatures, secondary MSO reactions are diverted, mainly caused by the different Lewis basicity on the two catalysts. Over ZrO2, MSO reacts with activated acetone (acetone enolate) to form a surface 4,4-dimethyl-2,6-heptadione (phorone-C), which is further converted into a stable isophorone intermediate. At temperatures above 473?K, polymerization/oligomerization of isophorone along with basic hydroxyl promoted decomposition reactions occur, leading to the formation of heavier carbonaceous surface species and gas-phase side products (methane and CO2). The addition of zinc balances the surface acid-base properties on ZnxZryOz (i.e., Zn1Zr10Oz) via not only enhancing the surface Lewis basicity but passivating the strong acidity. This balance, especially the enhanced surface Lewis basicity largely promotes the a-H abstraction of MSO to form MSO enolate on the Zn1Zr10Oz, which thus favors the aldolization of MSO enolate and acetone, a reaction tends to form 2,6-dimethyl-2,5-heptadien-4-one (phorone-A). Phorone-A then readily decomposes to produce isobutene as a major product at temperature as low as 373?K. Note that, despite the facile formation of isobutene at low temperatures, a high temperature (673?K) is still necessary to release the strongly adsorbed formate/carbonate/acetate species via CO2 formation.
In situ structural study of manganese and iron oxide promoted rhodium catalysts for oxygenate synthesis
Explore the source record for details and available documents.
Kinetic and mechanistic study of bimetallic Pt-Pd/Al2O3 catalysts for CO and C3H6 oxidation
Not Available
Water for electricity in India: A multi-model study of future challenges and linkages to climate change mitigation
This paper provides projections of water withdrawals and consumption for electricity generation in India through 2050. Based on the results from five energy-economic modeling teams, the paper explores the implications of economic growth, power plant cooling policies, and electricity CO2 emissions reductions on water withdrawals and consumption. To isolate modeling differences, the five teams used harmonized assumptions regarding economic and population growth, the distribution of power plants by cooling technologies, and withdrawals and consumption intensities. The results demonstrate the different but potentially complementary implications of cooling technology policies and efforts to reduce CO2 emissions. The application of closed-loop cooling technologies substantially reduces water withdrawals but increases consumption. The water implications of CO2 emissions reductions, depend critically on the approach to these reductions. Focusing on wind and solar power reduces consumption and withdrawals; a focus on nuclear power increases both; and a focus on hydroelectric power could increase consumptive losses through evaporation.
Woody bioenergy crop selection can have large effects on water yield: A southeastern United States case study
Short-rotation woody crops in the southeastern United States will make a significant contribution to the growing renewable energy supply over the 21st century; however, there are few studies that investigate how species selection may affect water yield. Here we assessed the impact of species selection on annual and seasonal water budgets in unvegetated plots and late-rotation 14–15-year-old intensively managed loblolly pine (Pinus taeda L.) and sweetgum (Liquidambar styraciflua L.) stands in South Carolina USA. We found that while annual aboveground net primary productivity and bioenergy produced was similar between species, sweetgum transpiration was 53% higher than loblolly pine annually and 92% greater during the growing season. Canopy interception was 10.5% of annual precipitation and was not significantly different between the two species. Soil evaporation was less than 1.3% of annual precipitation and did not differ between species, but was 26% of precipitation in unvegetated plots. Annual water yield was 69% lower for sweetgum than loblolly pine, with water yield to precipitation ratios of 0.13 and 0.39 for sweetgum and loblolly pine, respectively. If planted at a large scale, the high transpiration and low water yield in sweetgum could result in declines in downstream water availability relative to loblolly pine by the end of the growing season when storage in groundwater, streams, and water supply reservoirs are typically at their lowest. Our results suggest that species selection is of critical importance when establishing forest plantations for woody bioenergy production due to potential impacts on downstream water yield.
Parametric study for the optimization of ionic liquid pretreatment of corn stover
Not Available
Size-dependent selectivity and activity of silver nanoclusters in the partial oxidation of propylene to propylene oxide and acrolein : A joint experimental and theoretical study.
Model silver nanocatalysts between 9 and 23 nm in size were prepared by size-selected cluster deposition from a free cluster beam on amorphous alumina films and their size-dependent catalytic performance studied in the partial oxidation of propylene under realistic reaction conditions. Smaller clusters preferentially produced acrolein, while the 23 nm particles were considerably more selective towards the formation of propylene oxide, at reaction rates far exceeding those previously reported for larger silver particles. The activity of clusters dropped significantly with increasing particle size. First-principle calculations, of the activation energies for oxygen adsorption and its dissociation, at variable surface coverage yielded surface energies which resulted in particle shapes resembling the experimentally observed shapes of partially oxidized silver clusters. The calculated activation barriers for propylene oxide and acrolein formation on various facets and on the edges of the nanoparticles provided detailed information about the energetics of the competing reaction pathways. The size- and corresponding morphology dependent theoretical activity and selectivity are in good accord with experimental observations.
Structural studies of a bacterial condensin complex reveal ATP-dependent disruption of intersubunit interactions
N/A
Mechanical properties of jennite: A theoretical and experimental study
The objective of this study is to determine the mechanical properties of jennite. To date, several hypotheses have been proposed to predict the structural properties of jennite. For the first time as reported herein, the isothermal bulk modulus of jennite was measured experimentally. Synchrotron-based high-pressure x-ray diffraction experiments were performed to observe the variation of lattice parameters under pressure. First-principles calculations were applied to compare with the experimental results and predict additional structural properties. Accurately measured isothermal bulk modulus herein (K{sub 0} = 64(2) GPa) and the statistical assessment on experimental and theoretical results suggest reliable mechanical properties of shear and Young's modulus, Poisson's ratio, and elastic tensor coefficients. Determination of these fundamental structural properties is the first step toward greater understanding of calcium–silicate–hydrate, as well as provides a sound foundation for forthcoming atomic level simulations.
Synchrotron X-ray nanotomographic and spectromicroscopic study of the tricalcium aluminate hydration in the presence of gypsum
The rheology of modern Portland cement (PC) concrete critically depends on the correct dosage of gypsum (calcium sulfate hydrate) to control the hydration of the most reactive phase - tricalcium aluminate (C{sub 3}A). The underlying physio-chemical mechanism, however, remains unsolved mainly due to the lack of high-spatial-resolved and chemistry-sensitive characterization of the C{sub 3}A dissolution frontier. Here, we fill this gap by integrating synchrotron-radiation based crystallographic, photon-energy-dependent spectroscopic and high-resolution morphological studies of the C{sub 3}A hydration product layer. We propose that ettringite (6CaO·Al{sub 2}O{sub 3}·SO{sub 3}·32H{sub 2}O) is the only hydration product after the initial reaction period and before complete gypsum dissolution. We quantify the 2D and 3D morphology of the ettringite network, e.g. the packing density of ettringite at various surface locations and the surface dissolution heterogeneity. Our results show no trace of a rate-controlling diffusion barrier. We expect our work to have significant impact on modeling the kinetics and morphological evolution of PC hydration.
FT-IR study of CO2 interaction with Na+ exchanged montmorillonite
Explore the source record for details and available documents.
An experimental and kinetic modeling study of methyl formate low-pressure flames
Explore the source record for details and available documents.
The atmospheric impact of the reaction of N2O with NO3: A theoretical study
Not Available