Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface codes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

X-ray polarization spectroscopy to study energy transport in ultra-high intensity laser produced plasmas

X-ray polarization spectroscopy was studied to derive directly the velocity distribution function (VDF) of hot electrons propagating in plasma created with a high intensity laser pulse. Polarization measurement was made at around 10{sup 18} W/cm{sup 2} using a laser pulse (approx10 J in approx1 ps) from Alise facility at CEA/CESTA. Chlorinated triple-layer targets were irradiated, and Cl Healpha line was observed with an x-ray polarization spectrometer. Polarization degrees were measured as a function of the target overcoat thickness, corresponding to the depth along pre-formed plasma. It is found that the polarization is weakly negative for thin coating, but becomes positive, and finally zero for thick coating. This result is consistent with predictions made with a time-dependent atomic kinetics code developed to gain an insight into the generation of polarized Cl Healpha radiation. The de-polarization on the surface is attributed to excessive bulk electron temperature and that in the deep region to elastic-scattering processes by the isotropic bulk electrons in dense region.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Review of ICR Heating on the Spherical Tokamak Globus-M

The results of experiments on the RF heating of hydrogen-deuterium plasma at ion cyclotron frequencies in the Globus-M spherical tokamak are presented. RF power up to 200 kW at frequencies about 7.5-9 MHz fed via a single-loop antenna led to an increase in the ion temperature from 180 eV up to 400 eV in the best case. High heating efficiency is maintained at high H-concentration (up to 70%). Characteristic times of the ion temperature buildup and decay corresponded to the ion energy confinement time. If the second hydrogen harmonic is arranged in front of antenna, on-axis ion heating becomes worse. It is shown, that in Globus conditions graphite shielding of an inner surface of a vacuum chamber decreases heating due to surface absorption of RF power. Simulation of processes of RF power absorption is performed also. For modeling 1-D wave code was used including all possible mechanisms of RF power absorption.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Theory and simulation of quasilinear transport from external magnetic field perturbations in a DIII-D plasma

The linear response profiles for the 3D perturbed magnetic fields, currents, ion velocities, plasma density, pressures, and electric potential from low-n external resonant magnetic field perturbations (RMPs) are obtained from the collisional two-fluid M3D-C1 code [N. M. Ferraro and S. C. Jardin, J. Comput. Phys. 228, 7742 (2009)]. A newly developed post-processing RMPtran code computes the resulting quasilinear E×B and magnetic (J×B) radial transport flows with respect to the unperturbed flux surfaces in all channels. RMPtran simulations focus on ion (center of mass) particle and transient non-ambipolar current flows, as well as the toroidal angular momentum flow. The paper attempts to delineate the RMP transport mechanisms that might be responsible for the RMP density pump-out seen in DIII-D [M. A. Mahdavi and J. L. Luxon, Fusion Sci. Technol. 48, 2 (2005)]. Experimentally, the starting high toroidal rotation does not brake to a significantly lower rotation after the pump-out suggesting that convective and E×B transport mechanisms dominate. The direct J×B torque from the transient non-ambipolar radial current expected to accelerate plasma rotation is shown to cancel much of the Maxwell stress J×B torque expected to brake the plasma rotation. The dominant E×B Reynolds stress accelerates rotation at the top of the pedestal while braking rotation further down the pedestal.

Waltz, R. E. (ORCID:0000000252034830)↗

THERMAL AND CHEMICAL STRUCTURE VARIATIONS IN TITAN'S STRATOSPHERE DURING THE CASSINI MISSION

We have developed a line-by-line Atmospheric Radiative Transfer for Titan code that includes the most recent laboratory spectroscopic data and haze descriptions relative to Titan's stratosphere. We use this code to model Cassini Composite Infrared Spectrometer data taken during the numerous Titan flybys from 2006 to 2012 at surface-intercepting geometry in the 600-1500 cm{sup -1} range for latitudes from 50 Degree-Sign S to 50 Degree-Sign N. We report variations in temperature and chemical composition in the stratosphere during the Cassini mission, before and after the Northern Spring Equinox (NSE). We find indication for a weakening of the temperature gradient with warming of the stratosphere and cooling of the lower mesosphere. In addition, we infer precise concentrations for the trace gases and their main isotopologues and find that the chemical composition in Titan's stratosphere varies significantly with latitude during the 6 years investigated here, with increased mixing ratios toward the northern latitudes. In particular, we monitor and quantify the amplitude of a maximum enhancement of several gases observed at northern latitudes up to 50 Degree-Sign N around mid-2009, at the time of the NSE. We find that this rise is followed by a rapid decrease in chemical inventory in 2010 probably due to a weakening north polar vortex with reduced lateral mixing across the vortex boundary.

79 ASTRONOMY AND ASTROPHYSICS↗

Highly charged Ar{sup q+} ions interacting with metals

Using computer simulation, alternative methods of the interaction of highly charged ions Ar{sup q+} with metals (Au, Ag) are used and verified in the present work. Based on the classical over-barrier model, we discussed the promotion loss and peeling off processes. The simulated total potential electron yields agree well with the experiment data in incident energy ranging from 100 eV to 5 keV and all charge states of Ar{sup q+}. Based on the TRIM code, we obtain the side-feeding rate as well as the motion and charge transfer of HCI below the surface. Some results, including the array of KL{sup x} x-ray satellite lines, the respective contribution of autoionization, and side-feeding to inner shells, and the filling rates and lifetime of inner shells for Ar agree well with experiment or theory.

74 ATOMIC AND MOLECULAR PHYSICS↗

Strongly Emitting Surfaces Unable to Float below Plasma Potential

One important unresolved question in plasma physics concerns the effect of strong electron emission on plasma-surface interactions. Previous papers reported solutions with negative and positive floating potentials relative to the plasma edge. For these two models a very different predictions for particle and energy balance is given. Here we show that the positive potential state is the only possible equilibrium in general. Even if a negative floating potential existed at t=0, the ionization collisions near the surface will force a transition to the positive floating potential state. Moreover, this transition is demonstrated with a new simulation code.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

TbsP and TrmB jointly regulate gapII to influence cell development phenotypes in the archaeon Haloferax volcanii

Abstract Microbial cells must continually adapt their physiology in the face of changing environmental conditions. Archaea living in extreme conditions, such as saturated salinity, represent important examples of such resilience. The model salt‐loving organism Haloferax volcanii exhibits remarkable plasticity in its morphology, biofilm formation, and motility in response to variations in nutrients and cell density. However, the mechanisms regulating these lifestyle transitions remain unclear. In prior research, we showed that the transcriptional regulator, TrmB, maintains the rod shape in the related species Halobacterium salinarum by activating the expression of enzyme‐coding genes in the gluconeogenesis metabolic pathway. In Hbt. salinarum , TrmB‐dependent production of glucose moieties is required for cell surface glycoprotein biogenesis. Here, we use a combination of genetics and quantitative phenotyping assays to demonstrate that TrmB is essential for growth under gluconeogenic conditions in Hfx. volcanii . The ∆ trmB strain rapidly accumulated suppressor mutations in a gene encoding a novel transcriptional regulator, which we name t rm B s u p pressor, or TbsP (a.k.a. “tablespoon”). TbsP is required for adhesion to abiotic surfaces (i.e., biofilm formation) and maintains wild‐type cell morphology and motility. We use functional genomics and promoter fusion assays to characterize the regulons controlled by each of TrmB and TbsP, including joint regulation of the glucose‐dependent transcription of gapII , which encodes an important gluconeogenic enzyme. We conclude that TrmB and TbsP coregulate gluconeogenesis, with downstream impacts on lifestyle transitions in response to nutrients in Hfx. volcanii .

Biochemistry & Molecular Biology↗

Fabrication of ZnO photonic crystals by nanosphere lithography using inductively coupled-plasma reactive ion etching with CH{sub 4}/H{sub 2}/Ar plasma on the ZnO/GaN heterojunction light emitting diodes

This article reports fabrication of n-ZnO photonic crystal/p-GaN light emitting diode (LED) by nanosphere lithography to further booster the light efficiency. In this article, the fabrication of ZnO photonic crystals is carried out by nanosphere lithography using inductively coupled plasma reactive ion etching with CH{sub 4}/H{sub 2}/Ar plasma on the n-ZnO/p-GaN heterojunction LEDs. The CH{sub 4}/H{sub 2}/Ar mixed gas gives high etching rate of n-ZnO film, which yields a better surface morphology and results less plasma-induced damages of the n-ZnO film. Optimal ZnO lattice parameters of 200 nm and air fill factor from 0.35 to 0.65 were obtained from fitting the spectrum of n-ZnO/p-GaN LED using a MATLAB code. In this article, we will show our recent result that a ZnO photonic crystal cylinder has been fabricated using polystyrene nanosphere mask with lattice parameter of 200 nm and radius of hole around 70 nm. Surface morphology of ZnO photonic crystal was examined by scanning electron microscope.

36 MATERIALS SCIENCE↗

Multi-Dimensional Modeling of Nova with Realistic Nuclear Physics

This contract covered the period from 03/09/2010 to 09/30/2010. Over this period, we adapted the low Mach number hydrodynamics code MAESTRO to perform simulations of novae. A nova is the thermonuclear runaway of an accreted hydrogen layer on the surface of a white dwarf. As the accreted layer grows in mass, the temperature and density at the base increase to the point where hydrogen fusion can begin by the CNO cycle - a burning process that uses carbon, nitrogen, and oxygen to complete the fusion of four hydrogen nuclei into one helium-4 nucleus. At this point, we are running initial models of nova, exploring the details of the convection. In the follow-on contract to this one, we will continue this investigation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Wedgehog Manual and Interface Guide, Jayenne-7_0_0

Wedgehog is an IMC package developed by the CCS–2’s Monte Carlo Team1 . Wedgehog is designed to interface with a time-split radiation-hydrodynamics (rad-hydro) code and supports one-dimensional R, two-dimensional RZ or three dimensional XY Z geometry. The geometry is confined to logically rectangular Adaptive Mesh Refinement (AMR) meshes with unit aspect ratios and 2:1 refinement between adjacent cells. Wedgehog supports both two and three temperature simulations. Available scattering models for photon-electron interaction include Compton and isotropic scattering. It maintains a census of particles in between time steps to preserve the contents of the radiation field. Wedgehog can accommodate frequency dependence by using a “Multigroup” (MG) approximation that essentially averages the frequency-dependent opacity information into discrete bins. Additionally, Wedge hog includes a capability to use Opacity Distribution Factors (ODFs) that may be generated with the XCP-5 code TOPS. A previous version of Wedgehog that utilizes IBM’s Cell chip is available for the Roadrunner petascale computer at Los Alamos National Laboratory (circa 2006-2013, estimated). However, as Roadrunner is going out of service in the near future, we have dropped support for the interfaces that were deprecated in Jayenne 6 4 0 and removed in Jayenne-7 0 0. The Roadrunner version had the same interface as the mainline code and is available in RZ and XYZ geometry with all the same features except for flux tallies across a surface (i.e., tally sphere and RZ line-segment).

79 ASTRONOMY AND ASTROPHYSICS↗

Moisture Performance of Unvented Attics With Vapor Diffusion Ports and Buried Ducts in Hot, Humid Climates

Energy efficiency measures, such as cool roofs, radiant barriers, interior radiative control coatings, and buried ducts are increasing in popularity and are promoted by energy codes because of their energy-saving potential. However, these strategies can also pose moisture risks in attics by lowering surface temperatures and increasing condensation potential and moisture accumulation. Of particular concern in hot-humid climates is dripping condensation on cold air-conditioning ductwork in the summer - commonly referred to as duct "sweating" - which threatens the attic floor with conditions conducive to mold growth and rot. One strategy to mitigate these moisture issues is to wrap ductwork in thicker duct-wrap insulation with an integrated exterior vapor barrier, but thick duct wrap can be difficult to come by, expensive, and unwieldy to work with. This study explores an alternative strategy of reducing moisture issues while embracing energy efficiency by using unvented attics with vapor diffusion ports and buried ductwork in hot-humid climates. Vapor diffusion ports have been studied so far in a wide range of U.S. climates, mostly in the context of conditioned attics. In this study, the strategy is implemented in the novel context of hot-humid climates with ductwork sitting atop blown-in attic floor insulation in unconditioned attics. Using a combination of field experiments and hygrothermal modeling, the findings of this project indicate that an unvented attic with vapor diffusion ports and buried ducts may be a key part of a successful low-cost method for reducing the attic moisture load by venting excess moisture out of the attic, keeping duct-jacket surfaces above dew point temperature, and keeping the roof deck safe from winter moisture accumulation.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Advanced quadratures and periodic boundary conditions in parallel 3D S{sub n} transport

Significant updates in numerical quadratures have warranted investigation with 3D Sn discrete ordinates transport. We show new applications of quadrature departing from level symmetric ( S{sub 2}o). investigating 3 recently developed quadratures: Even-Odd (EO), Linear-Discontinuous Finite Element - Surface Area (LDFE-SA), and the non-symmetric Icosahedral Quadrature (IC). We discuss implementation changes to 3D Sn codes (applied to Hybrid MOC-Sn TITAN and 3D parallel PENTRAN) that can be performed to accommodate Icosahedral Quadrature, as this quadrature is not 90-degree rotation invariant. In particular, as demonstrated using PENTRAN, the properties of Icosahedral Quadrature are suitable for trivial application using periodic BCs versus that of reflective BCs. In addition to implementing periodic BCs for 3D Sn PENTRAN, we implemented a technique termed 'angular re-sweep' which properly conditions periodic BCs for outer eigenvalue iterative loop convergence. As demonstrated by two simple transport problems (3-group fixed source and 3-group reflected/periodic eigenvalue pin cell), we remark that all of the quadratures we investigated are generally superior to level symmetric quadrature, with Icosahedral Quadrature performing the most efficiently for problems tested. (authors)

97 MATHEMATICS AND COMPUTING↗

Crystallographic analysis of the implanted TiNi monocrystal containing misoriented localized shear mesobands in its near-surface layer [001]{sub B2}

The study was carried on for the implanted single TiNi crystal containing misoriented localized shear mesobands in its near-surface layer [001] B2. Due to the response of material to the Si ion implantation treatment of the single TiNi crystal, deformation mesobands would form in its near-surface layer. Specially designed software tools were employed for the treatment of experimental data obtained from X-ray and electron diffraction patterns. The 3D crystallographic orientations were calculated for the localized shear regions, which were displaced relative to one another and with respect to the original monocrystal orientation.

36 MATERIALS SCIENCE↗

Coupled Experiment and Theory to Explore the Limits of Material Strength at High Strain Rates

Critical components such as detonators in Sandia's stockpile are heterogeneous materials that rely on accurate constitutive models for each material used in the component. However, experiments to study materials at high pressure are challenging and time consumptive, therefore we turn to modeling tools to refine and predict outcomes beforehand. Efficient models balance absolute physical accuracy against approximate but computationally lightweight constitutive inputs. By using a relatively small number of high fidelity simulations and experiments we have be able to broaden the predictive power of the shock response in metals and polymers. We have tailored the analysis of these simulations to determine a size dependent material strength, which can be used as constitutive model inputs for continuum hydrodynamics codes. For the shocked Cu, MD simulations show a yield strength from RMI jet growth of approximately 450MPa that depends on the details of the free surface geometry. This value is close to the yield strength of 500MPa parameterized for an elastic-perfectly-plastic strength model from experiments at the Dynamic Compression Sector at Argonne National Lab. The same analysis applied to MD simulations of PMMA jetting resulted in no clear determination of yield strength, implying a more complex RMI process in polymeric materials. Atomistic simulations of both materials are shown to be valuable training metrics and show the need for explicit strain rate dependent strength for future improvements in strength models used in continuum codes.

36 MATERIALS SCIENCE↗

Analyses of SPERT-CDC test 859 by FEMAXI-7 and RANNS codes

In the current Japanese regulation concerning fuel safety of water-cooled reactors, the criterion of fuel failure due to pellet-cladding mechanical interaction (PCMI) in a burnup range of 25-40 GWd/t is determined substantially based on the result of SPERT-CDC test 859 (SPERT859). However, there is room for discussion if the result of SPERT859 test rod with a burnup of 31.8 GWd/t represents the failure behavior of the fuel rod for commercial light water reactor because it was reported in some literatures that the cladding of SPERT859 test rod corroded excessively during pre-irradiation. On the other hand, the oxide thickness on the cladding of SPERT859 test rod was not reported in the data of its post-irradiation examinations (PIEs) after pre-irradiation, and the probability of the excessive corrosion on the cladding of the test rod and the effect of such excessive corrosion on the fuel enthalpy at failure of the test rod has not yet been clarified. In this study, the oxide thickness of the cladding formed on the cladding outer surface of SPERT859 test rod and its fuel enthalpy at failure due to PCMI under this corrosion condition were analyzed by using fuel performance codes FEMAXI-7 and RANNS. From the analysis results of FEMAXI-7, it was found that the excessive corrosion of the cladding of the test rod should be assumed to reproduce the fuel outer diameter measured in PIEs after pre-irradiation. The fuel enthalpy at failure of the test rod was calculated by using RANNS, and the calculated fuel enthalpy at failure was relatively close to the value of SPERT859 test rod. These results suggested that the fuel enthalpy at failure of SPERT859 was affected by the excessive corrosion on the cladding of the test rod and was likely lower than that of the typical fuel for light water reactors. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Characterization of geometrical factors for quantitative angle-resolved photoelectron spectroscopy

For conventional angle-resolved x-ray photoelectron spectroscopy (ARXPS), the area under the core-level peaks depends mainly on the in-depth distribution of chemical species at the top surface of a specimen. But the x-ray photoelectron spectroscopy (XPS) intensity is also affected by tool-related geometrical factors such as the shape of the x-ray beam, the spectrometer analysis volume, and the manipulator rotation axis. Data analysis is therefore typically based on normalization with respect to the signal from the substrate. Here, we present an original method to perform quantitative ARXPS without normalization, involving evaluation of these geometrical factors. The method is illustrated for a multiprobe XPS system using a methodology based on a specific software (XPSGeometry{sup Registered-Sign }), but is a general process that can be adapted to all types of XPS equipment, even those not specifically designed for ARXPS. In that case, this method enables bringing the sample as close as possible to the manipulator axis of rotation in order to perform automatic acquisitions.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

SANTA BARBARA CLUSTER COMPARISON TEST WITH DISPH

The Santa Barbara cluster comparison project revealed that there is a systematic difference between entropy profiles of clusters of galaxies obtained by Eulerian mesh and Lagrangian smoothed particle hydrodynamics (SPH) codes: mesh codes gave a core with a constant entropy, whereas SPH codes did not. One possible reason for this difference is that mesh codes are not Galilean invariant. Another possible reason is the problem of the SPH method, which might give too much “protection” to cold clumps because of the unphysical surface tension induced at contact discontinuities. In this paper, we apply the density-independent formulation of SPH (DISPH), which can handle contact discontinuities accurately, to simulations of a cluster of galaxies and compare the results with those with the standard SPH. We obtained the entropy core when we adopt DISPH. The size of the core is, however, significantly smaller than those obtained with mesh simulations and is comparable to those obtained with quasi-Lagrangian schemes such as “moving mesh” and “mesh free” schemes. We conclude that both the standard SPH without artificial conductivity and Eulerian mesh codes have serious problems even with such an idealized simulation, while DISPH, SPH with artificial conductivity, and quasi-Lagrangian schemes have sufficient capability to deal with it.

79 ASTRONOMY AND ASTROPHYSICS↗

Modeling Warm Dense Matter Experiments using the 3D ALE-AMR Code and the Move Toward Exascale Computing

The Neutralized Drift Compression Experiment II (NDCX II) is an induction accelerator planned for initial commissioning in 2012. The final design calls for a 3 MeV, Li+ ion beam, delivered in a bunch with characteristic pulse duration of 1 ns, and transverse dimension of order 1 mm. The NDCX II will be used in studies of material in the warm dense matter (WDM) regime, and ion beam/hydrodynamic coupling experiments relevant to heavy ion based inertial fusion energy. We discuss recent efforts to adapt the 3D ALE-AMR code to model WDM experiments on NDCX II. The code, which combines Arbitrary Lagrangian Eulerian (ALE) hydrodynamics with Adaptive Mesh Refinement (AMR), has physics models that include ion deposition, radiation hydrodynamics, thermal diffusion, anisotropic material strength with material time history, and advanced models for fragmentation. Experiments at NDCX-II will explore the process of bubble and droplet formation (two-phase expansion) of superheated metal solids using ion beams. Experiments at higher temperatures will explore equation of state and heavy ion fusion beam-to-target energy coupling efficiency. Ion beams allow precise control of local beam energy deposition providing uniform volumetric heating on a timescale shorter than that of hydrodynamic expansion. The ALE-AMR code does not have any export control restrictions and is currently running at the National Energy Research Scientific Computing Center (NERSC) at LBNL and has been shown to scale well to thousands of CPUs. New surface tension models that are being implemented and applied to WDM experiments. Some of the approaches use a diffuse interface surface tension model that is based on the advective Cahn-Hilliard equations, which allows for droplet breakup in divergent velocity fields without the need for imposed perturbations. Other methods require seeding or other methods for droplet breakup. We also briefly discuss the effects of the move to exascale computing and related computational changes on general modeling codes in fusion energy.

42 ENGINEERING↗