Search NASA⌕ Search

SEARCH · Search NASA

Results for “surface slopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Photoclinometric determination of the topography of the Martian north polar cap

Photoclinometry is useful for the determination of topography for areas which have a uniform albedo. The technique is applied to early spring Viking images of the Martian north polar cap, taken when the surface was covered by a nearly uniform frost cover. Unlike earlier approaches, the topographic profiling can be used for surfaces with any photometric function, but the strike of the planetary surface relative to the illumination angle must be specified along the profile. The resultant profiles are relatively insensitive to misestimation of the photometric function and slope orientation, but are quite sensitive to the assumed values of the reflectance of an equivalent level surface and the atmospheric opacity (if it is large).

Howard, A. D.↗
NASA NTRS1974

Surface fitting three-dimensional bodies

The geometry of general three-dimensional bodies is generated from coordinates of points in several cross sections. Since these points may not be smooth, they are divided into segments and general conic sections are curve fit in a least-squares sense to each segment of a cross section. The conic sections are then blended in the longitudinal direction by fitting parametric cubic-spline curves through coordinate points which define the conic sections in the cross-sectional planes. Both the cross-sectional and longitudinal curves may be modified by specifying particular segments as straight lines and slopes at selected points. Slopes may be continuous or discontinuous and finite or infinite. After a satisfactory surface fit has been obtained, cards may be punched with the data necessary to form a geometry subroutine package for use in other computer programs. At any position on the body, coordinates, slopes and second partial derivatives are calculated. The method is applied to a blunted 70 deg delta wing, and it was found to generate the geometry very well.

Dejarnette, F. R.↗
NASA NTRS1996

Radar Observations of Asteroids 1 Ceres, 2 Pallas, and 4 Vesta

Asteroids 1 Ceres, 2 Pallas, and 4 Vesta were observed with the 13-cm Arecibo radar and the 3.5-cm Goldstone radar during several apparitions between 1981 and 1995. These observations help to characterize the objects' surface properties. Echoes from Ceres and Pallas are approximately 95% polarized (muon(sub C) = sigm(sub SC)/sigma(sub OC) equivalent to 0.05) in the sense expected for specular (mirror) reflection yet broadly distributed in Doppler frequency, thus revealing surfaces that are smoother than the Moon at decimeter scales but much rougher (rms slopes > 20 deg) on larger scales. Slopes on Ceres appear to be somewhat higher when viewed with the 3.5-cm wavelength, a trend that is observed for the terrestrial planets and the Moon. In contrast, echoes from Vesta are significantly depolarized, indicating substantial near-surface complexity at scales near 13 cm (muon(sub C) = 0.24 +/- 0.04) and 3.5 cm (muon(sub C) = 0.32 +/- 0.04), which is probably a consequence of Vesta's relatively strong basaltic surface material and may be a signature of large impact features inferred to be present on the surface. The low radar albedos of Ceres (circumflex-sigma(sub C) = 0.042 +/- 0.006) and Pallas (circumfle-sigma(sub C) = 0.075 +/- 0.011) are in the range expected for surfaces with a carbonaceous chondrite mineralogy. Pallas' distinctly higher albedo implies a approximately 35% higher surface density, which could result from a lower regolith porosity and/or a higher specific gravity (zero-porosity density). Given a porosity of 45%, the specific gravities of the surface materials on Ceres and Pallas would be approximately 2.3 and approximately 3.0 g/cc, respectively, which would be consistent with (1) the presence of an additional silicate component on Pallas' surface (as inferred from spectroscopic observations) and (2) recent mass estimates, which suggest a higher mean (volume-averaged) density for Pallas than for Ceres.

Mitchell, David L.↗
DOE OSTI2021

Processes contributing to cloud dissipation and formation events on the North Slope of Alaska

Abstract. Clear-sky periods across the high latitudes have profound impacts on the surface energy budget and lower atmospheric stratification; however an understanding of the atmospheric processes leading to low-level cloud dissipation and formation events is limited. A method to identify clear periods at Utqiaġvik (formerly Barrow), Alaska, during a 5-year period (2014–2018) is developed. A suite of remote sensing and in situ measurements from the high-latitude observatory are analyzed; we focus on comparing and contrasting atmospheric properties during low-level (below 2 km) cloud dissipation and formation events to understand the processes controlling clear-sky periods. Vertical profiles of lidar backscatter suggest that aerosol presence across the lower atmosphere is relatively invariant during the periods bookending clear conditions, which suggests that a sparsity of aerosol is not frequently a cause for cloud dissipation on the North Slope of Alaska. Further, meteorological analysis indicates two active processes ongoing that appear to support the formation of low clouds after a clear-sky period: namely, horizontal advection, which was dominant in winter and early spring, and quiescent air mass modification, which was dominant in the summer. During summer, the dominant mode of cloud formation is a low cloud or fog layer developing near the surface. This low cloud formation is driven largely by air mass modification under relatively quiescent synoptic conditions. Near-surface aerosol particles concentrations changed by a factor of 2 around summer formation events. Thermodynamic adjustment and increased aerosol presence under quiescent atmospheric conditions are hypothesized as important mechanisms for fog formation.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2016

PHYSICAL CHARACTERIZATION OF ∼2 m DIAMETER NEAR-EARTH ASTEROID 2015 TC25: A POSSIBLE BOULDER FROM E-TYPE ASTEROID (44) NYSA

Small near-Earth asteroids (NEAs) (<20 m) are interesting, because they are progenitors for meteorites in our terrestrial collection. The physical characteristics of these small NEAs are crucial to our understanding of the effectiveness of our atmosphere in filtering low-strength impactors. In the past, the characterization of small NEAs has been a challenge, because of the difficulty in detecting them prior to close Earth flyby. In this study, we physically characterized the 2 m diameter NEA 2015 TC25 using ground-based optical, near-infrared and radar assets during a close flyby of the Earth (distance 128,000 km) in 2015 October 12. Our observations suggest that its surface composition is similar to aubrites, a rare class of high-albedo differentiated meteorites. Aubrites make up only 0.14% of all known meteorites in our terrestrial meteorite collection. 2015 TC25 is also a very fast rotator with a period of 133 ± 6 s. We combined the spectral and dynamical properties of 2015 TC25 and found the best candidate source body in the inner main belt to be the 70 km diameter E-type asteroid (44) Nysa. We attribute the difference in spectral slope between the two objects to the lack of regolith on the surface of 2015 TC25. Using the albedo of E-type asteroids (50%–60%) we refine the diameter of 2015 TC25 to 2 m, making it one of the smallest NEAs ever to be characterized.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2000

Landscape Evolution, A Comparison of Form and Process

This project's goals were to collect, analyze and interpret 3-dimensional physiographic data for understanding the processes responsible for landscape modification. The primary landforms to be studied were Neogene cinder cones in Arizona (San Francisco Volcanic Field (SFVF), Coconino and Kaibab National Forests, Arizona). We also obtained and are still analyzing digital topographic data for the Long Valley-White Mountains area of California, which display Quaternary normal fault scarps, as well as extensive evidence of degradation. The work resulted in a large database of measured rates of downslope transport of slope debris. It was hypothesized that the work would increase our understanding of process-response models of hillslope degradation, and of the effects of climate change and other parameters on degradation rates. In greater detail, our primary goal was to compare evolutionary sequences of hillslopes, as exemplified by the topography of landforms of the same type but of different ages, with measurements of the surficial processes active on the landforms. Assuming that other parameters, such as hillslope materials and vegetation are held constant, and that the effects of changing climate are negligible, then the sediment transport rates measured today on the landforms should be the same as those calculated from the inversion of landform topography by use of a diffusion-type model. However, if the effects of changing climate or other factors are not negligible, then the observed transport rates would differ from those which must be invoked to explain the current topography. We hypothesized in fact that because degradation on the event scale is highly transient and localized, we would find a wide divergence between modern, measured transport rates, and rates calculated by global landform inversion or modeling. Because of the length of time involved in collection of sufficient data on current degradation rates, we are still continuing to analyse and interpret the data. Completion of the work will increase our understanding of the potential effects of anthropogenic climate and surficial change on the Earth's solid surface, and possibly allow us to constrain paths of hill-slope evolution following anthropogenic modifications, as well as compare the short-term with the long-term rates of hillslope degradation.

Bursik, Marcus I.↗
NASA NTRS1984

Surface and allied studies in silicon solar cells

Measuring small-signal admittance versus frequency and forward bias voltage together with a new transient measurement apparently provides the most reliable and flexible method available for determining back surface recombination velocity and low-injection lifetime of the quasineutral base region of silicon solar cells. The new transient measurement reported here is called short-circuit-current decay (SCCD). In this method, forward voltage equal to about the open-circuit or the maximum power voltage establishes excess holes and electrons in the junction transition region and in the quasineutral regions. The sudden application of a short circuit causes an exiting of the excess holes and electrons in the transition region within about ten picoseconds. From observing the slope and intercept of the subsequent current decay, the base lifetime and surface recombination velocity can be determined. The admittance measurement previously mentioned then enters to increase accuracy particularly for devices for which the diffusion length exceeds the base thickness.

Lindholm, F. A.↗
DOE OSTI2023

Insight to the Duration of 120 °C Baking on the Performance of SRF Niobium Cavities

Low-temperature baking at 100 °C - 140 °C in ultra-high vacuum for several hours is the final cavity processing technique to achieve the highest accelerating gradient cavity by eliminating the high field Q-slope, typically on cavities made of high purity fine grain niobium and subjected to electropolishing. The temperature and duration of baking control the onset of the high field Q-slope and overall quality factor over the baseline measurements. The increase in quality factor is generally related to the reduction in the temperature-dependent surface resistance, which refers to BCS surface resistance due to the reduction in the electronic mean free path and elimination of high field Q-slope is still being actively investigated. Here, we present the results of a series of measurements on 1.3 GHz TESLA shape single-cell cavities with successive low-temperature baking at 120 °C up to 96 hours. The rf loss related to the trapping of residual magnetic field refer to flux trapping sensitivity was measured with respect to the duration of 120 °C bake.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1979

Optical polarimetry of asteroids and laboratory samples

Interpretations of astronomical polarization data for more than 100 minor planets are summarized with reference to laboratory data for lunar, meteoritic, and terrestrial samples. All observed asteroids, including objects only a few kilometers in diameter, have microscopically intricate surfaces. Detailed comparisons between laboratory measurements of basaltic achondrites and telescopic results for Vesta show that its surface is particulate with a broad range of particle sizes, including a component of fine (1-5 micron) dust. The surface soils have not, however, undergone marked optical alterations as is the case for the lunar fines. For albedos greater than about 0.06, the albedo and hence the diameter can be determined with some reliability from the slope of the ascending branch of the polarization-phase curve. Many minor planets have surfaces that are remarkably uniform in albedo and texture on a hemispheric scale. A notable exception is 4 Vesta, which shows about ten percent albedo variegation between hemispheres.

Dollfus, A.↗
DOE OSTI2020

Radial Wall Jet Flow Over Sigmoidal Surfaces

Radial wall jet flows across flat smooth surfaces have been studied for decades. These studies show that the radial velocity of these jets decays inversely with distance from the nozzle with modest contribution from friction (Poreh, et al., 1967; Rajaratnam, 1976). However, the extent to which flat surface results apply to curved surfaces remains unclear. In this article we explore the influence of settled particle bed slope on these velocity profiles. We model the step change in thickness as a sigmoidal curve of variable steepness and use conservation of momentum to evaluate the velocity profile. We show that the velocity profile attenuates because of curvature. Next, we evaluate the influence of surface curvature on radial wall jet flow. Jet flows over particle beds often introduce curvature in the particle bed profile but the influence of the developed curvature on the velocity profile has not been explored. Here we develop a solution for steady fixed beds based on conservation of momentum. We find that surface curvature has a significant influence on the velocity decay coefficients and celerity of radial wall jets, provided there is velocity slip in the vicinity of the particle bed interface, which is strictly true for particle surfaces. Conservation of momentum predicts conditions where the forward momentum of the flow is directed completely upward. The solution identifies two new dimensionless groups that determine whether a curved surface is sufficient to block radial flow and force flow vertically.

Surface curvature, jet flow, multiphase flow↗
NASA NTRS2017

The Use of Sun Elevation Angle for Stereogrammetric Boreal Forest Height in Open Canopies

Stereogrammetry applied to globally available high resolution spaceborne imagery (HRSI; less than 5 m spatial resolution) yields fine-scaled digital surface models (DSMs) of elevation. These DSMs may represent elevations that range from the ground to the vegetation canopy surface, are produced from stereoscopic image pairs (stereo pairs) that have a variety of acquisition characteristics, and have been coupled with lidar data of forest structure and ground surface elevation to examine forest height. This work explores surface elevations from HRSI DSMs derived from two types of acquisitions in open canopy forests. We (1) apply an automated mass-production stereogrammetry workflow to along-track HRSI stereo pairs, (2) identify multiple spatially coincident DSMs whose stereo pairs were acquired under different solar geometry, (3) vertically co-register these DSMs using coincident spaceborne lidar footprints (from ICESat-GLAS) as reference, and(4) examine differences in surface elevations between the reference lidar and the co-registered HRSI DSMs associated with two general types of acquisitions (DSM types) from different sun elevation angles. We find that these DSM types, distinguished by sun elevation angle at the time of stereo pair acquisition, are associated with different surface elevations estimated from automated stereogrammetry in open canopy forests. For DSM values with corresponding reference ground surface elevation from spaceborne lidar footprints in open canopy northern Siberian Larix forests with slopes less than10, our results show that HRSI DSM acquired with sun elevation angles greater than 35deg and less than 25deg (during snow-free conditions) produced characteristic and consistently distinct distributions of elevation differences from reference lidar. The former include DSMs of near-ground surfaces with root mean square errors less than 0.68 m relative to lidar. The latter, particularly those with angles less than 10deg, show distributions with larger differences from lidar that are associated with open canopy forests whose vegetation surface elevations are captured. Terrain aspect did not have a strong effect on the distribution of vegetation surfaces. Using the two DSM types together, the distribution of DSM-differenced heights in forests (6.0 m, sigma = 1.4 m) was consistent with the distribution of plot-level mean tree heights (6.5m, sigma = 1.2 m). We conclude that the variation in sun elevation angle at time of stereo pair acquisition can create illumination conditions conducive for capturing elevations of surfaces either near the ground or associated with vegetation canopy. Knowledge of HRSI acquisition solar geometry and snow cover can be used to understand and combine stereogrammetric surface elevation estimates to co-register rand difference overlapping DSMs, providing a means to map forest height at fine scales, resolving the vertical structure of groups of trees from spaceborne platforms in open canopy forests.

Paul M Montesano↗
NASA NTRS1977

A Study of Variable Features on Mars During the Viking Primary Mission

The Viking coverage revealed numerous wind streaks on the surface of Mars. The Viking images have provided the first good examples of very distinctive mixed tone streaks which appear to consist of a tapered light streak bordered by two dark side lobes. Attention is given to a general lack of eolian activity, eolian activity on the slopes of the Tharsis volcanos, spectacular albedo changes since 1972, more subtle albedo changes, surface detail and wind flow patterns in Hellas, wind flow in the vicinity of Olympus Mons, and a comparison of the 1972 and 1976 wind streak patterns.

Veverka, J.↗
NASA NTRS1998

Low sonic boom shock control/alleviation surface

A sonic control device that reduces the effects of shock waves generated by an aircraft traveling at supersonic speeds. The control device includes a control surface located at or near the nose section of the aircraft. The position of the control surface can be moved between a retracted position and an extended position. When in a deflected position, the control surface increases the air pressure at the nose section. The increase in air pressure at the nose section decreases both the pressure amplitude and the slope of the overall shock wave as the wave travels toward the ground. Additionally, the deflection of the control surface may induce a downward directed pressure increase which creates less of a drag penalty than a truly blunt nose. When shock control is not desired, the control surface is moved back to the retracted position to reduce the drag on the plane. The moving control device allows a supersonic aircraft to efficiently travel above both land and water.

Morgenstern, John M↗
NASA NTRS1993

The impact of clouds on the shortwave radiation budget of the surface-atmosphere system - Interfacing measurements and models

Two datasets have been combined to demonstrate how the availability of more comprehensive datasets could serve to elucidate the shortwave radiative impact of clouds on both the atmospheric column and the surface. These datasets consist of two measurements of net downward shortwave radiation: one of near-surface measurements made at the Boulder Atmospheric Observatory tower, and the other of collocated top-of-the-atmosphere measurements from the Earth Radiation Budget Experiment. Output from the European Centre for Medium Range Weather Forecasts General Circulation Model also has been used as an aid in interpreting the data, while the data have in turn been employed to validate the model's shortwave radiation code as it pertains to cloud radiation properties. Combined, the datasets and model demonstrate a strategy for determining under what conditions the shortwave radiative impact of clouds leads to a heating or cooling of the atmospheric column. The datasets also show, in terms of a linear slope-offset algorithm for retrieving the net downward shortwave radiation at the surface from satellite measurements, that the clouds present during this study produced a modest negative bias in the retrieved surface flux relative to that inferred from a clear-sky algorithm.

Cess, Robert D.↗
NASA NTRS1993

The Impact of Clouds on the Shortwave Radiation Budget of the Surface-Atmosphere System: Interfacing Measurements and Models

Two datasets have been combined to demonstrate how the availability of more comprehensive datasets could serve to elucidate the shortwave radiative impact of clouds on both the atmospheric column and the surface. These datasets consist of two measurements of net downward shortwave radiation: one of near-surface measurements made at the Boulder Atmospheric Observatory tower, and the other of collocated top-of-the-atmosphere measurements from the Earth Radiation Budget Experiment. Output from the European Centre for Medium-Range Weather Forecasts General Circulation Model also has been used as an aid in interpreting the data, while the data have in turn been employed to validate the model's shortwave radiation code as it pertains to cloud radiation properties. Combined, the datasets and model demonstrate a strategy for determining under what conditions the shortwave radiative impact of clouds leads to a heating or cooling of the atmospheric column. The datasets also show, in terms of a linear slope-offset algorithm for retrieving the net downward shortwave radiation at the surface from satellite measurements, that the clouds present during this study produced a modest negative bias in the retrieved surface flux relative to that inferred from a clear-sky algorithm.

Cess, Robert D.↗
DOE OSTI2023

Off-axis representation of hyperbolic mirror shapes for X-ray beamlines

Mirror-centered, closed-form expressions for hyperbolic surfaces used in X-ray beamlines have been derived. Hyperbolic mirrors create a virtual focus or source point and can be used to lengthen or shorten the effective focal distance of a compound optical system. The derivations here express off-axis segments of a hyperbolic surface in terms of the real and virtual focal distances and the incident glancing angle at the center of the mirror. Conventional mathematical expressions of hyperbolic shapes describe the surfaces in Cartesian or polar coordinates centered on an axis of symmetry, necessitating cumbersome rotation and translation to mirror-centered coordinates. The representation presented here, with zero slope and the origin at the central point, is most convenient for modeling, metrology, aberration correction, and general surface analysis of off-axis configurations. The direct derivation avoids the need for nested coordinate transforms. A series expansion provides a helpful approximation; the coefficients of the implicit equation are also provided.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Attosecond Probing of Coherent Vibrational Dynamics in CBr 4

A coherent vibrational wavepacket is launched and manipulated in the symmetric stretch (a1) mode of CBr 4 , by impulsive stimulated Raman scattering (ISRS) from nonresonant 400 nm laser pump pulses with various peak intensities on the order of tens of 10 12 W/cm 2 . Extreme ultraviolet (XUV) attosecond transient absorption spectroscopy (ATAS) records the wavepacket dynamics as temporal oscillations in XUV absorption energy at the bromine M 4,5 3d 3/2,5/2 edges around 70 eV. The results are augmented by nuclear timedependent Schrödinger equation simulations. Slopes of the (Br 3d 3/2,5/2 ) –1 10a 1 * core-excited state potential energy surface (PES) along the a 1 mode are calculated to be –9.4 eV/Å from restricted open-shell Kohn–Sham calculations. Using analytical relations derived for the small-displacement limit and the calculated slopes of the core-excited state PES, a deeper insight into the vibrational dynamics is obtained by retrieving the experimental excursion amplitude of the vibrational wavepacket and the amount of population transferred to the vibrational first-excited state as a function of pump-pulse peak intensity. Experimentally, the results show that XUV ATAS is capable of resolving oscillations in the XUV absorption energy on the order of a few to tens of meV with tens of femtosecond time precision. This corresponds to change in C–Br bond length on the order of 10 –4 to 10 –3 Å. The results and the analytic relationships offer a clear physical picture, on multiple levels of understanding, of how the pump-pulse peak intensity controls the vibrational dynamics launched by nonresonant ISRS in the small-displacement limit.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

Investigation of liquid cloud microphysical properties of deep convective systems: 1. Parameterization raindrop size distribution and its application for stratiform rain estimation

Abstract To investigate liquid‐phase ( T > 3°C) cloud and precipitation microphysical properties within Deep Convective Systems (DCSs), eight DCS cases sampled by the University of North Dakota Citation II research aircraft during Midlatitude Continental Convective Clouds Experiment were selected. A full spectrum of raindrop size distribution (DSD) was constructed from 120 µm to 4000 µm through a combination of two‐dimensional cloud probe (120 to 900 µm) and High Volume Precipitation Spectrometer (900 to 4000 µm) data sets. A total of 1126 five second DSDs have been used to fit to Gamma and Exponential functions within the stratiform rain (SR) regions of DCSs. The Gamma shape μ Γ and slope λ Γ parameters are then compared with those derived from surface disdrometer measurements. The similar μ Γ ‐ λ Γ relationships but different μ Γ and λ Γ value ranges from two independent platforms at different elevations may represent the real nature of DSD shape information in clouds and at the surface. To apply the exponentially fitted DSD parameters to precipitation estimation using Next Generation Weather Radar (NEXRAD) radar reflectivity factor Z e , the terms N 0 E and λ E have been parameterized as a function of Z e using an empirical N 0 E ‐ λ E relationship. The averaged SR rain rate retrieved from this study is almost identical to the surface measurements, while the NEXRAD Q2 precipitation is twice as large. The comparisons indicate that the new DSD parameterization scheme is robust, while the Q2 SR precipitation estimation based on Marshall‐Palmer Z‐R relationship, where a constant DSD intercept parameter ( N 0 E ) was assumed, needs to be improved for heavy precipitation cases.

Wang, Jingyu↗