Search NASA⌕ Search

SEARCH · Search NASA

Results for “task”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Review of Recent Literature Relevant to the Environmental Effects of Marine and Hydrokinetic Energy Devices, Task 2.1.3: Effects on Aquatic Organisms – Fiscal Year 2011 Progress Report Environmental Effects of Marine and Hydrokinetic Energy

A literature search was conducted by using the Web of Science® Databases component of the ISI Web of KnowledgeSM to identify recent articles that would be useful to help assess the potential environmental effects of renewable energy development in the ocean, with emphasis on marine mammals, seabirds, and fish. Several relatively recent general review articles that included possible effects of marine renewable energy devices on marine mammals and seabirds were examined to begin the search process (e.g., Boehlert et al. 2008; Thompson et al. 2008; Simas et al. 2009). From these articles, several general topics of potential environmental effects on marine mammals, seabirds, and fish were derived. These topics were used as the primary search factors. Searches were conducted with reference to the potential effects of offshore wind farms and MHK devices on marine mammals, seabirds, and fish. Additional sources were identified by cross-checking the Web of Science databases for articles that cited the review articles. It also became clear that often the potential effects were offered as hypotheses that often were not supported by the presentation of appropriate documentation. Therefore, the search was refined and focused on trying to obtain the necessary information to support or challenge a proposed potential effect to a specific concern. One of the expressed concerns regarding MHK devices is that placing wave parks in coastal waters could compromise the migration patterns of whales. Disruption of the annual migration of the gray whale (Eschrichtius robustus), which swims at least 30,000 km on its round trip from breeding grounds in Baja California to feeding areas in the Bering Sea, is of particular concern. Among the hypothesized effects on the migrating gray whales are increased predation risk by constricting migration corridor to between array and shore or by forcing the whales to swim into deeper waters, increased metabolic energy costs and delays in reaching the destinations, and interrupting feeding by blocking access to benthic areas under arrays. The literature search focused on identifying published studies that could provide information to evaluate these concerns. The results were developed into a case study that evaluated the potential effects of the placement of wave parks in coastal waters along the migration route of the gray whale. Wave parks and other MHK arrays may have additional effects on gray whales and other marine mammals, including entanglement in mooring lines and interference with communications among other effects, that were not included in this case study. The case study results were rewritten into a simpler form that would be suitable for placement on a web blog

Kropp, Roy K.↗

Reactor Pressure Vessel Task of Light Water Reactor Sustainability Program: Level 2 Milestone (M2LW-12OR0402015). Results of Examinations of Surveillance Specimens from Commercial Reactors

The reactor pressure vessel (RPV) in a light-water reactor (LWR) represents the first line of defense against a release of radiation in case of an accident. Thus, regulations that govern the operation of commercial nuclear power plants require conservative margins of fracture toughness, both during normal operation and under accident scenarios. In the unirradiated condition, the RPV has sufficient fracture toughness such that failure is implausible under any postulated condition, including pressurized thermal shock (PTS) in pressurized water reactors (PWR). In the irradiated condition, however, the fracture toughness of the RPV may be severely degraded, with the degree of toughness loss dependent on the radiation sensitivity of the materials. As stated in previous progress reports, the available embrittlement predictive models, e.g. [1], and our present understanding of radiation damage are not fully quantitative, and do not treat all potentially significant variables and issues, particularly considering extension of operation to 80y.

Nanstad, Randy K.↗

Digial Technology Qualification Task 2 - Suitability of Digital Alternatives to Analog Sensors and Actuators

The next generation reactors in the U.S. are an opportunity for vendors to build new reactor technology with advanced Instrumentation and Control Systems (control rooms, DCS, etc.). The advances made in the development of many current generation operating reactors in other parts of the world are being used in the design and construction of new plants. These new plants are expected to have fully integrated digital control rooms, computerized procedures, integrated surveillance testing with on-line monitoring and a major effort toward improving the O&M and fault survivability of the overall systems. In addition the designs are also incorporating major improvements in the man-machine interface based on lessons learned in nuclear and other industries. The above relates primarily to the scope of supply in instrumentation and control systems addressed by Chapter 7 of the Standard Review Plan (SRP) NUREG-0800 (Reference 9.5), and the associated Balance of Plant (BOP) I&C systems. This does not relate directly to the actuator and motor, breaker, initiation circuitry, valve position, etc. which is the subject of this report and normally outside of the traditional Distributed Control System (DCS), for both safety and non-safety systems. The recommendations presented in this report will be used as input to I&C research programming for the implementation of lessons learned during the early phases of new build both for large light water reactors (LWR) and also small modular reactors (SMR). This report is intended to support current research plans and provide user (vendor, owner-operator) input to the optimization of these research plans.

99 GENERAL AND MISCELLANEOUS↗

Review of Recent Literature Relevant to the Environmental Effects of Marine and Hydrokinetic Energy Devices; Task 2.1.3: Effects on Aquatic Organisms - Fiscal Year 2012 Progress Report

A literature search was conducted by using the Web of Science® databases component of the ISI Web of Knowledge to identify recent articles that would be useful to help assess the potential environmental effects of renewable energy development in the ocean, with emphasis on seabirds and fish. Several relatively recent general review articles that included possible effects on seabirds and fish were examined to begin the search process. From these articles, several general topics of potential environmental effects on seabirds and fish were derived. These topics were used as the primary search factors. Additional sources were identified by cross-checking the Web of Science databases for articles that cited the review articles.

Green Sturgeon↗

LLNL Genomic Assessment: TMT Task 1.4 Final Report on Sequencing Knowledge Gaps

TMT has made great progress in filling many major gaps in bacterial genome diversity. However, relatively little progress has been made in filling the much bigger gaps in viral genome diversity. At the present time no TMT performer has a demonstrated ability to perform large scale production viral sequencing, something that is necessary if TMT is to make any progress in viral countermeasures. TMT has a current over-capacity for bacterial sequencing that needs to be ramped down to ensure that there are TMT-relevant reasons to sequence further bacterial isolates of several species (see below for details.) It is a critical need for TMT to establish a credible plan to be able to sequence hundreds of viral samples per year, including many deep quasi-species analyses. This plan ought to include establishing and/or maintaining relationships with scientists currently holding valuable strains or who would be predicted to be on the forefront of emerging outbreaks worldwide and able to obtain critical samples and/or sequence data. TMT should add and test the ability to do bacterial metagenomic sequencing (e.g., not just a single isolated plaque but the entire population variation of complex clinical and environmental samples.)

59 BASIC BIOLOGICAL SCIENCES↗

Final report for EEB Hub, Task 10.2, Metrics Development, BP2

The long-term EEB Hub goal quantified during BP2 is to accelerate the adoption of advanced energy retrofits to reduce building energy use 20% by 2020 for commercial buildings in the greater Philadelphia region. For each budget period, the EEB Hub develops deliverables targeted at methods and means to achieve this long-term goal. The purpose of metrics is to regularly measure progress towards achieving the annual budget-period deliverables.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Task 3: PNNL Visit by JAEA Researchers to Participate in TODAM Code Applications to Fukushima Rivers and to Evaluate the Feasibility of Adaptation of FLESCOT Code to Simulate Radionuclide Transport in the Pacific Ocean Coastal Water Around Fukushima

Four JAEA researchers visited PNNL for two weeks in February, 2013 to learn the PNNL-developed, unsteady, one-dimensional, river model, TODAM and the PNNL-developed, time-dependent, three dimensional, coastal water model, FLESCOT. These codes predict sediment and contaminant concentrations by accounting sediment-radionuclide interactions, e.g., adsorption/desorption and transport-deposition-resuspension of sediment-sorbed radionuclides.

Coastal Water Model↗

Technical Letter Report Development of Flaw Size Distribution Tables Including Effects of Flaw Depth Sizing Errors for Draft 10CFR 50.61a (Alternate PTS Rule) JCN-N6398, Task 4

This document describes a new method to determine whether the flaws in a particular reactor pressure vessel are consistent with the assumptions regarding the number and sizes of flaws used in the analyses that formed the technical justification basis for the new voluntary alternative Pressurized Thermal Shock (PTS) rule (Draft 10 CFR 50.61a). The new methodology addresses concerns regarding prior methodology because ASME Code Section XI examinations do not detect all fabrication flaws, they have higher detection performance for some flaw types, and there are flaw sizing errors always present (e.g., significant oversizing of small flaws and systematic under sizing of larger flaws). The new methodology allows direct comparison of ASME Code Section XI examination results with values in the PTS draft rule Tables 2 and 3 in order to determine if the number and sizes of flaws detected by an ASME Code Section XI examination are consistent with those assumed in the probabilistic fracture mechanics calculations performed in support of the development of 10 CFR 50.61a.

Fabrication Flaws Density and Distribution in RPVs↗

Screening Analysis for the Environmental Risk Evaluation System Task 2.1.1.2: Evaluating Effects of Stressors Fiscal Year 2011 Progress Report - Environmental Effects of Marine and Hydrokinetic Energy

Potential environmental effects of marine and hydrokinetic (MHK) energy development are not well understood, and yet regulatory agencies are required to make decisions in spite of substantial uncertainty about environmental impacts and their long-term consequences. An understanding of risks associated with interactions between MHK installations and aquatic receptors, including animals, habitats, and ecosystems, can help define key uncertainties and focus regulatory actions and scientific studies on interactions of most concern. As a first step in developing the Pacific Northwest National Laboratory (PNNL) Environmental Risk Evaluation System (ERES), PNNL scientists conducted a preliminary risk screening analysis on three initial MHK cases. During FY 2011, two additional cases were added: a tidal project in the Gulf of Maine using Ocean Renewable Power Company TidGenTM turbines and a wave project planned for the coast of Oregon using Aquamarine Oyster surge devices.

Environmental Risk Evaluation System↗

Electric Vehicle Preparedness Task 2: Identification of Joint Base Lewis McChord Vehicles for Installation of Data Loggers

The U.S. Department of Energy and the U.S. Department of Defense signed a memorandum of understanding on July 22, 2010, for the purpose of strengthening the coordination of efforts to enhance national energy security and to demonstrate federal government leadership in transitioning America to a low-carbon economy. The memorandum of understanding included efforts in the areas of energy efficiency, fossil fuels, alternative fuels, efficient transportation technologies and fueling infrastructure, grid security, smart grid, and storage. In support of the memorandum of understanding, the Idaho National Laboratory, with funding provided by the U.S. Department of Energy’s Vehicle Technologies Office and Federal Energy Management Program, directed ECOtality North America to conduct several U.S. Department of Defense base studies to identify potential U.S. Department of Defense transportation systems that are strong candidates for introduction or expansion of electric drive vehicles.

99 GENERAL AND MISCELLANEOUS↗

Electric Vehicle Preparedness Task 1: Assessment of Data and Survey Results for Joint Base Lewis McChord

The U.S. Department of Energy and the U.S. Department of Defense signed a memorandum of understanding on July 22, 2010, for the purpose of strengthening the coordination of efforts to enhance national energy security and to demonstrate federal government leadership in transitioning America to a low-carbon economy. The memorandum of understanding included efforts in the areas of energy efficiency, fossil fuels, alternative fuels, efficient transportation technologies and fueling infrastructure, grid security, smart grid, and storage. In support of the memorandum of understanding, the Idaho National Laboratory, with funding provided by U.S. Department of Energy’s Vehicle Technologies Office and Federal Energy Management Program, directed ECOtality North America to conduct several U.S. Department of Defense base studies to identify potential U.S. Department of Defense transportation systems that are strong candidates for the introduction or expansion of electric drive vehicles.

99 GENERAL AND MISCELLANEOUS↗

Electric Vehicle Preparedness Task 1: Assessment of Data and Survey Results for NAS Jacksonville and NS Mayport

The U.S. Department of Energy and the U.S. Department of Defense signed a memorandum of understanding on July 22, 2010, for the purpose of strengthening the coordination of efforts to enhance national energy security and to demonstrate federal government leadership in transitioning America to a low-carbon economy. The memorandum of understanding included efforts in the areas of energy efficiency, fossil fuels, alternative fuels, efficient transportation technologies and fueling infrastructure, grid security, smart grid, and storage. In support of the memorandum of understanding, the Idaho National Laboratory, with funding provided by the U.S. Department of Energy’s Vehicle Technologies Office and Federal Energy Management Program, directed ECOtality North America to conduct several U.S. Department of Defense base studies to identify potential U.S. Department of Defense transportation systems that are strong candidates for introduction or expansion of electric drive vehicles.

99 GENERAL AND MISCELLANEOUS↗

Progress Letter Report on Bending Fatigue Test System Development for Spent Nuclear Fuel Vibration Integrity Study (Out-of-cell fatigue testing development - Task 2.4)

Vibration integrity of high burn-up spent nuclear fuel in transportation remains to be a critical component of US nuclear waste management system. The structural evaluation of package for spent fuel transportation eventually will need to see if the content or spent fuel is in a subcritical condition. However, a system for testing and characterizing such spent fuel is still lacking mainly due to the complication involved with dealing radioactive specimens in a hot cell environment. Apparently, the current state-of-the-art in spent fuel research and development is quite far away from the delivery of reliable mechanical property data for the assessment of spent fuels in the transport package evaluation.

Spent Nuclear Fuel Vibration Integrity↗

Task P: Experimental Particle Physics (Final Report)

The UCSD Elementary Particle Physics group investigates physics at the High Energy Frontier by working exclusively on the CMS experiment at the Large Hadron Collider at CERN. The goal of all four PIs is to discover new facets of the as-yet unwritten laws of nature as a new high-energy regime is opened at the LHC. To that end, we are primarily working on the search for the Higgs boson(s), on the search for supersymmetry, and the search for other new particles and interactions. Further, our goal is to have a very significant intellectual impact on the experiment, as we have in the past. We have played a leading role in the Higgs search in the past and particularly in the observation of a new boson that is consistent with a Higgs-like particle. All four PIs are very involved in the Higgs search. Vivek Sharma was the CMS Higgs co-coordinator during 2010-11. One of our key goals is to measure the properties of this particle as accurately as possible during the upcoming proposal period. The most important modes for this measurement are H 0 → γγ, H 0 → ZZ, and H 0 → WW. We have played leading roles in the measurement of these channels up to now and our goal is to continue work in these channels, measuring the production modes of the “Higgs”, the spin and parity, and the decay branching fractions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

IEA HPP Annex 41 Cold Climate Heat Pumps: Task 1 Report Literature and Technology Review United States - ORNL/TM-2013/472

During the mid-1970s, following the first oil embargo, heat pumps became of great interest to northern U. S. electric power companies, particularly for those experiencing large peak demands during the heating season, as shortages of natural gas and oil led to increased usage of direct electric heating. Air-source heat pumps (ASHP), given their wider market presence relative to other heat pump types, almost universal applicability, and inherent efficiency and capacity issues at cold outdoor temperatures were of primary interest as an electrical heating system alternative at that time. ASHPs based on the simple vapor compression cycle suffer both heating capacity (output) and efficiency (coefficient of performance or COP) degradation as the outdoor ambient temperature drops.

Baxter, Van D.↗