Search NASA⌕ Search

SEARCH · Search NASA

Results for “yield analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 721 records · Page 40

Calibration of an aerogel counter of index 1.1 at the Bevalac

The counter, which is exposed to sea level muons and to a beam of relativistic Mn-55, is 6 cm thick and approximmately 60 cm in diameter; it is viewed by twelve 12.7-cm-diameter photomultipliers. It comprises a mosaic with 48 aerogel pieces whose refractive indices are approximately 1.1. It is pointed out that a relativistic muon produces typically 23 + or - 4 photo-electrons. The light yield, which is mapped as a function of position, has an r.m.s. variation of less than 1 percent per cm. An analysis of the light yield suggests that absorption is important at short wavelengths. The calibration reveals that the light yield and uniformity of the counter are sufficient to determine particle velocity in the gamma range from 2.4 to 3.1.

Rasmussen, I. L.↗

Searching for dark matter annihilation in recently discovered Milky Way satellites with Fermi-LAT

We search for excess γ-ray emission coincident with the positions of confirmed and candidate Milky Way satellite galaxies using six years of data from the Fermi Large Area Telescope (LAT). Our sample of 45 stellar systems includes 28 kinematically confirmed dark-matter-dominated dwarf spheroidal galaxies (dSphs) and 17 recently discovered systems that have photometric characteristics consistent with the population of known dSphs. For each of these targets, the relative predicted γ-ray flux due to dark matter annihilation is taken from kinematic analysis if available, and estimated from a distance-based scaling relation otherwise, assuming that the stellar systems are DM-dominated dSphs. LAT data coincident with four of the newly discovered targets show a slight preference (each ∼2σ local) for γ-ray emission in excess of the background. However, the ensemble of derived γ-ray flux upper limits for individual targets is consistent with the expectation from analyzing random blank-sky regions, and a combined analysis of the population of stellar systems yields no globally significant excess (global significance <1σ). Our analysis has increased sensitivity compared to the analysis of 15 confirmed dSphs by Ackermann et al. The observed constraints on the DM annihilation cross section are statistically consistent with the background expectation, improving by a factor of ∼2 for large DM masses (m{sub DM,b b-bar }≳1 TeV and m{sub DM,τ{sup +}τ{sup −}}≳70 GeV) and weakening by a factor of ∼1.5 at lower masses relative to previously observed limits.

79 ASTRONOMY AND ASTROPHYSICS↗

Scanning capacitance microscopy of ErAs nanoparticles embedded in GaAs pn junctions

Scanning capacitance microscopy is used to characterize the electronic properties of ErAs nanoparticles embedded in GaAs pn junctions grown by molecular beam epitaxy. Voltage-dependent capacitance images reveal localized variations in subsurface electronic structure near buried ErAs nanoparticles at lateral length scales of 20-30 nm. Numerical modeling indicates that these variations arise from inhomogeneities in charge modulation due to Fermi level pinning behavior associated with the embedded ErAs nanoparticles. Statistical analysis of image data yields an average particle radius of 6-8 nm--well below the direct resolution limit in scanning capacitance microscopy but discernible via analysis of patterns in nanoscale capacitance images.

36 MATERIALS SCIENCE↗

Ares I-X First Stage Internal Aft Skirt Re-Entry Heating Data and Modeling

The CLVSTATE engineering code is being used to predict Ares-I launch vehicle first stage reentry aerodynamic heating. An engineering analysis is developed which yields reasonable predictions for the timing of the first stage aft skirt thermal curtain failure and the resulting internal gas temperatures. The analysis is based on correlations of the Ares I-X internal aft skirt gas temperatures and has been implemented into CLVSTATE. Validation of the thermal curtain opening models has been accomplished using additional Ares I-X thermocouple, calorimeter and pressure flight data. In addition, a technique which accounts for radiation losses at high altitudes has been developed which improves the gas temperature measurements obtained by the gas temperature probes (GTP). Updates to the CLVSTATE models are shown to improve the accuracy of the internal aft skirt heating predictions which will result in increased confidence in future vehicle designs

Schmitz, Craig P.↗

New Measurements of Upsilon Spin Alignment at the Tevatron

We describe a new analysis of {Upsilon}(nS) {yields} {mu}{sup +}{mu}{sup -} decays collected in p{bar p} collisions with the CDF II detector at the Fermilab Tevatron. This analysis measures the angular distributions of the final state muons in the {Upsilon} rest frame, providing new information about {Upsilon} production polarization. We find the angular distributions to be nearly isotropic up to {Upsilon} p{sub T} of 40 GeV/c, consistent with previous measurements by CDF, but inconsistent with results obtained by the D0 experiment. The results are compared with recent NLO calculations based on color-singlet matrix elements and non-relativistic QCD with color-octet matrix elements.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TEA Modeling to Quantify Economic Implications for Biorefinery Processing of Isolated Anatomical Fractions of Corn Stover

The Feedstock-Conversion Interface Consortium (FCIC; https://www.energy.gov/sites/prod/files/2020/01/f70/beto-fcic-overview-web.pdf), a collaboration of nine national laboratory partners, seeks to understand impacts of feedstock attributes on biorefinery performance. It is hypothesized that different individual anatomical fractions of corn stover vary in composition and recalcitrance, such that processing each fraction on its own through dedicated campaigns may enable better biorefinery economics overall relative to processing the whole stover material. This presentation focuses on techno-economic analysis (TEA) modeling to quantify the yield and cost ramifications for processing isolated anatomical fractions of corn stover through a low-temperature conversion biorefinery, reflecting a biochemical processing pathway consisting of biomass deconstruction through pretreatment and enzymatic hydrolysis, sugar fermentation and upgrading to hydrocarbon fuels, and lignin upgrading to value-added coproducts. Commercial-scale process simulation and economic evaluation leveraged experimental and analytical data from FCIC researchers for conversion of whole corn stover plus three individual anatomical fractions (cobs, husks, and stalks) across key steps of the conversion process. Our assessment found encouraging potential for biorefinery economic gains that may be achieved through this approach. TEA results indicated fuel yields varying from 29-44 gallons gasoline equivalent (GGE)/dry ton for the individual anatomical fractions compared to whole stover at 34 GGE/ton, equating to minimum fuel selling prices (MFSPs) between $6.37-$10.18/GGE for the fractions versus $8.76/GGE for whole stover (when lignin is burned), or $9.15-$15.19/GGE for the fractions versus $13.11/GGE for whole stover (when lignin is upgraded to coproducts, based on current experimental performance levels). Cobs and husks demonstrated the ability to achieve the highest fuel yields and lowest MFSPs, outperforming whole stover, while stalks led to the opposite result, as a composite reflection of compositional differences and process convertibility. Notably, even when taking the weighted average of the results reflecting each anatomical fraction weighted by its corresponding makeup of corn stover, this feasibility TEA screening supports feedstock cost allowances on the order of roughly $22-$29/ton as may reflect accommodating additional biomass fractionation equipment during feedstock pre-processing upstream of the conversion biorefinery gate to separate corn stover into such constituent fractions. Or viewed differently, the weighted average MFSP for the fractions was found to be $0.31-$0.32/GGE lower than the MFSP for the whole stover basis across either lignin scenario, when maintaining a fixed biomass feedstock cost. These findings highlight favorable implications for biorefinery economics as may be achieved by moving to a staged campaign approach for processing different corn stover fractions sequentially. Further opportunities exist for future work to fill in data gaps for remaining anatomical constituents (e.g. leaves) that were not included in the initial experimental studies, though are expected to maintain similar trends.

biochemical processing pathway↗

On the theory of solitary Rossby waves

The evolution of long, finite amplitude Rossby waves in a horizontally sheared zonal current is studied. The wave evolution is described by the Korteweg-de Vries equation or the modified Korteweg-de Vries equation depending on the atmospheric stratification. In either case, the cross-stream modal structure of these waves is given by the long-wave limit of the neutral eigensolutions of the barotropic stability equation. Both non-singular and singular eigensolutions are considered and the appropriate analysis is developed to yield a uniformly valid description of the motion in the critical-layer region where the wave speed matches the flow velocity. The analysis demonstrates that coherent, propagating, eddy structures can exist in stable shear flows and that these eddies have peculiar interaction properties quite distinct from the traditional views of turbulent motion.

Redekopp, L. G.↗

Regulation of cancer stem cell properties by CD9 in human B-acute lymphoblastic leukemia

Highlights: {yields} We performed more detailed analysis of CD9 function for CSC properties in B-ALL. {yields} Leukemogenic fusion/Src family proteins were markedly regulated in the CD9{sup +} cells. {yields} Proliferation of B-ALL cells was inhibited by anti-CD9 monoclonal antibody. {yields} Knockdown of CD9 by RNAi remarkably reduced the leukemogenic potential. {yields} CD9-knockdown affected the expression and phosphorylation of Src family and USP22. -- Abstract: Although the prognosis of acute lymphoblastic leukemia (ALL) has improved considerably in recent years, some of the cases still exhibit therapy-resistant. We have previously reported that CD9 was expressed heterogeneously in B-ALL cell lines and CD9{sup +} cells exhibited an asymmetric cell division with greater tumorigenic potential than CD9{sup -} cells. CD9{sup +} cells were also serially transplantable in immunodeficient mice, indicating that CD9{sup +} cell possess self-renewal capacity. In the current study, we performed more detailed analysis of CD9 function for the cancer stem cell (CSC) properties. In patient sample, CD9 was expressed in the most cases of B-ALL cells with significant correlation of CD34-expression. Gene expression analysis revealed that leukemogenic fusion proteins and Src family proteins were significantly regulated in the CD9{sup +} population. Moreover, CD9{sup +} cells exhibited drug-resistance, but proliferation of bulk cells was inhibited by anti-CD9 monoclonal antibody. Knockdown of CD9 remarkably reduced the leukemogenic potential. Furthermore, gene ablation of CD9 affected the expression and tyrosine-phosphorylation of Src family proteins and reduced the expression of histone-deubiquitinase USP22. Taken together, our results suggest that CD9 links to several signaling pathways and epigenetic modification for regulating the CSC properties of B-ALL.

60 APPLIED LIFE SCIENCES↗

Towards a neutron multiplicity measurement with the Accelerator Neutrino Neutron Interaction Experiment

The Accelerator Neutrino Neutron Interaction Experiment (ANNIE) is a 26 ton Gadolinium (Gd)-loaded water Cherenkov detector located on the Booster Neutrino Beam line at Fermilab. Its main goals are the measurement of the neutron multiplicity in neutrino-nucleus interactions as well as the cross-section of Charged Current Quasi-Elastic (CCQE) neutrino interactions on water. Besides the physics goals, the experiment also aims to be a testbed for new technologies such as Large Area Picosecond Photodetectors (LAPPDs) and Water-based Liquid Scintillators (WbLS). This thesis presents a preliminary measurement of the neutron multiplicity with {ANNIE}, using an analysis conducted on a fraction of the 2021 beam year. As preparatory measures, the efficiency of ANNIE's Front Muon Veto (FMV) was determined to be {$\bar{\varepsilon}_{\mathrm{FMV}} = (95.6 \pm 1.6)\%$} while the average efficiency for active scintillator paddles in the Muon Range Detector (MRD) was found to be {$\bar{\varepsilon}_ {\mathrm{MRD}} = (92.1 \pm 7.9)\%$}. Furthermore, the simulation framework used for ANNIE was validated and adapted to reproduce the experimental data by comparing the detector response for samples of Michel electrons, Americium Beryllium neutrons, and through-going muons. The analysis finds average neutron yields of {$\bar{n}_{\mathrm{data}} (\mathrm{beam}) = (0.272 \pm 0.010_{\mathrm{stat}})$} for an inclusive set of all identified muon neutrino candidates and {$\bar{n}_{\mathrm{data}} (\mathrm{beam,FV}) = (0.287 \pm 0.044_{\mathrm{stat}})$ for interactions which happened inside of the Fiducial Volume of ANNIE, which was optimized to increase the neutron detection acceptance. The presented neutron multiplicity values represent the number of detected neutrons after all event selection cuts and are not yet corrected for the neutron detection efficiency. An equivalent analysis on a simulated beam sample predicts neutron yields of $\bar{n}_{\mathrm{MC}}(\mathrm{beam}) = (0.515 \pm 0.0 07_{\mathrm{stat}})$ and $\bar{n}_{\mathrm{MC}}(\mathrm{beam,FV}) = (0.627 \pm 0.031_{\mathrm{stat}})$, indicating that the models tend to overpredict the number of neutrons produced in such interactions. Systematic errors have been briefly considered to contribute {$\sigma_{\mathrm{sys,FMV}} \sim 0.01\,$neutrons/$\nu$-interaction} due to the slight FMV inefficiency and {$\sigma_{\mathrm{sys,n}} \sim 0.05\,$neutrons/$\nu$-interaction} due to the neutron detection efficiency. Simulation studies further highlighted the importance of neutron detection in Diffuse Supernova Background (DSNB) searches. A combination of neutron tagging and Convolutional Neural Networks was found to reduce the most relevant Neutral Current Quasi-Elastic (NCQE) interaction background below the signal level, achieving a Signal-to-Background ratio of 4:1. In a further study, we investigated the positive impact of a deployment of a WbLS target on the energy reconstruction in ANNIE. WbLS provides a scintillation signal from hadronic recoils in addition to the charged lepton that can be included in neutrino energy reconstruction. It was found that a deployed WbLS volume in ANNIE improves the neutrino energy reconstruction from 14\% to 12\%, with the potential of going beyond this if more sophisticated reconstruction algorithms are developed in the future.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for b{yields}u transitions in B{sup -{yields}}DK{sup -} and D*K{sup -} decays

We report results from an updated study of the suppressed decays B{sup -}{yields}DK{sup -} and B{sup -}{yields}D*K{sup -} followed by D{yields}K{sup +{pi}-}, where D{sup (*)} indicates a D{sup (*)0} or a D{sup (*)0} meson, and D*{yields}D{pi}{sup 0} or D*{yields}D{gamma}. These decays are sensitive to the Cabibbo-Kobayashi-Maskawa unitarity triangle angle {gamma} due to interference between the b{yields}c transition B{sup -}{yields}D{sup (*)0}K{sup -} followed by the doubly Cabibbo-suppressed decay D{sup 0}{yields}K{sup +{pi}-}, and the b{yields}u transition B{sup -}{yields}D{sup (*)0}K{sup -} followed by the Cabibbo-favored decay D{sup 0}{yields}K{sup +{pi}-}. We also report an analysis of the decay B{sup -}{yields}D{sup (*){pi}-} with the D decaying into the doubly Cabibbo-suppressed mode D{yields}K{sup +{pi}-}. Our results are based on 467x 10{sup 6} {Upsilon}(4S){yields}BB decays collected with the BABAR detector at SLAC. We measure the ratios R{sup (*)} of the suppressed ([K{sup +{pi}-}]{sub D}K{sup -}/{pi}{sup -}) to favored ([K{sup -{pi}+}]{sub D}K{sup -}/{pi}{sup -}) branching fractions as well as the CP asymmetries A{sup (*)} of those modes. We see indications of signals for the B{sup -}{yields}DK{sup -} and B{sup -}{yields}D{sub D{pi}}{sup 0}*K{sup -} suppressed modes, with statistical significances of 2.1 and 2.2{sigma}, respectively, and we measure: R{sub DK}=(1.1{+-}0.6{+-}0.2)x10{sup -2}, A{sub DK}=-0.86{+-}0.47{sub -0.16}{sup +0.12}, R{sub (D{pi}{sup 0})K}*=(1.8{+-}0.9{+-} 0.4)x10{sup -2}, A{sub (D{pi}{sup 0})K}*=+0.77{+-}0.35{+-}0.12, R{sub (D{gamma})K}*=(1.3{+-}1.4{+-}0.8)x10{sup -2},A{sub (D{gamma})K}*=+0.36 {+-}0.94{sub -0.41}{sup +0.25}, where the first uncertainty is statistical and the second is systematic. We use a frequentist approach to obtain the magnitude of the ratio r{sub B{identical_to}}|A(B{sup -}{yields}D{sup 0}K{sup -})/A(B{sup -}{yields}D{sup 0}K{sup -})|=(9.5{sub -4.1}{sup +5.1})%, with r{sub B}<16.7% at 90% confidence level. In the case of B{sup -}{yields}D*K{sup -} we find r{sub B}*{identical_to}|A(B{sup -}{yields}D*{sup 0}K{sup -})/A(B{sup -}{yields}D*{sup 0}K{sup -})|=(9.6{sub -5.1}{sup +3.5})%, with r{sub B}*<15.0% at 90% confidence level.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Motion of the Mantle in the Translational Modes of the Earth and Mercury

Slichter modes refer to the translational motion of the inner core with respect to the outer core and the mantle. The polar Slichter mode is the motion of the inner core along the axis of rotation. Busse presented an analysis of the polar mode which yielded an expression for its period. Busse's analysis included the assumption that the mantle was stationary. This approximation is valid for planets with small inner cores, such as the Earth whose inner core is about 1/60 of the total planet mass. On the other hand, many believe that Mercury's core may be enormous. If so, the motion of the mantle should be expected to produce a significant effect. We present a formal framework for including the motion of the mantle in the analysis of the translational motion of the inner core. We analyze the effect of the motion of the mantle on the Slichter modes for a non-rotating planet with an inner core of arbitrary size. We omit the effects of viscosity in the outer core, magnetic effects, and solid tides. Our approach is perturbative and is based on a linearization of Euler's equations for the motion of the fluid and Newton's second law for the motion of the inner core. We find an analytical expression for the period of the Slichter mode. Our result agrees with Busse's in the limiting case of small inner core. We present the unexpected result that even for Mercury the motion of the mantle does not significantly change the period of oscillation.

Grinfeld, Pavel↗

Synergistic Interactions During Co-Hydrothermal Liquefaction of Food Waste and Biomass Model Compounds for Increased Sustainable Aviation Fuel Production

Hydrothermal liquefaction (HTL) of lignocellulosic biomass is plagued with low biocrude yields owing to the tendency of highly reactive oxygenated intermediates to condense to form biochars. By contrast, the high protein content in food waste is comprised of substantial nitrogen species, which are known to interact strongly with oxygenates through Maillard, amide, and peptide bond formation reactions. Co-feeding food waste and lignocellulose opens new reaction pathways for biocrude formation but is currently poorly understood. This work evaluated the molecular level interactions between food waste and lignocellulose model compounds and the corresponding effect on product yields and quality. Food waste–cellulose and food waste–xylan feedstock blends achieved maximum biocrude carbon yield improvements of 12.2% and 10.1%, respectively, relative to a simple linear model that interpolates between the yields of the pure feedstocks. Increases in biocrude yield were balanced by corresponding decreases in char yield, indicating synergistic interactions between the feeds during HTL. Biocrude volatility analysis revealed that increased biocrude yield preferentially benefitted the jet fuel fraction, which comprised up to 22.6% of the total carbon yield for food waste–cellulose blends. Biocrude and char were analyzed using GC–MS and FT-IR spectroscopy to investigate the source of synergistic trends and provide greater mechanistic understanding. Key cofeeding effects included the promotion of retro-aldol condensation reactions and trans-esterification of fatty acids, sequestering carbon in the biocrude phase via the inhibition of char formation while increasing biocrude volatility toward jet fuel-range compounds. These results indicate the potential for judicious selection of HTL cofeeds to increase both biocrude yield and selectivity to desired fuel precursors, including sustainable aviation fuel.

Maillard reaction↗

Assessing Coulomb Collision Contributions to Photoelectron Deceleration above Earth’s Polar Caps

NASA’s Endurance rocket mission resolved a subtle energy shift in photoelectrons escaping from Earth’s polar caps, from which the first successful measurement of Earth’s ambipolar electrostatic field was made. Preflight models predicted that coulomb collisions with thermal electrons could add an extra energy shift of up to 1 eV. However, no such additional shift was reported in the initial analysis. Here, we identify a previously unreported effect related to the spacecraft wake, which introduced a systematic +0.25eV energy shift that countered and masked the shift from coulomb collisions. After applying an in-flight calibration for this wake effect, we find a total photopeak energy shift consistent with the combined influence of the ambipolar field and the subtler -0.37eV coulomb shift, predicted by the fully kinetic STET model. Further analysis of these recalibrated measurements yields an ambipolar field estimate in close agreement with the initial analysis.

Glyn A Collinson↗

Residual tissue repositories as a resource for population-based cancer proteomic studies

Background: Mass spectrometry-based proteomics has become a powerful tool for the identification and quantification of proteins from a wide variety of biological specimens. To date, the majority of studies utilizing tissue samples have been carried out on prospectively collected fresh frozen or optimal cutting temperature (OCT) embedded specimens. However, such specimens are often difficult to obtain, in limited in supply, and clinical information and outcomes on patients are inherently delayed as compared to banked samples. Annotated formalin fixed, paraffin embedded (FFPE) tumor tissue specimens are available for research use from a variety of tissue banks, such as from the surveillance, epidemiology and end results (SEER) registries’ residual tissue repositories. Given the wealth of outcomes information associated with such samples, the reuse of archived FFPE blocks for deep proteomic characterization with mass spectrometry technologies would provide a valuable resource for population-based cancer studies. Further, due to the widespread availability of FFPE specimens, validation of specimen integrity opens the possibility for thousands of studies that can be conducted worldwide. Methods: To examine the suitability of the SEER repository tissues for proteomic and phosphoproteomic analysis, we analyzed 60 SEER patient samples, with time in storage ranging from 7 to 32 years; 60 samples with expression proteomics and 18 with phosphoproteomics, using isobaric labeling. Linear modeling and gene set enrichment analysis was used to evaluate the impacts of collection site and storage time. Results: All samples, regardless of age, yielded suitable protein mass after extraction for expression analysis and 18 samples yielded sufficient mass for phosphopeptide analysis. Although peptide, protein, and phosphopeptide identifications were reduced by 50, 20 and 76% respectively, from comparable OCT specimens, we found no statistically significant differences in protein quantitation correlating with collection site or specimen age. GSEA analysis of GOterm level measurements of protein abundance differences between FFPE and OCT embedded specimens suggest that the formalin fixation process may alter representation of protein categories in the resulting dataset. Conclusions: These studies demonstrate that residual FFPE tissue specimens, of varying age and collection site, are a promising source of protein for proteomic investigations if paired with rigorously verified mass spectrometry workflows.

60 APPLIED LIFE SCIENCES↗

Swift heavy ion irradiation-induced amorphization of La2Ti2O7

Polycrystalline La2Ti2O7 powders have been irradiated with 2.0 GeV 181Ta ions up to a fluence of 1 × 1013 ions/cm2. Radiation-induced structural modifications were analyzed using synchrotron-based X-ray diffraction (XRD), small angle X-ray scattering (SAXS), Raman spectroscopy and transmission electron microscopy (TEM). An increase in the amorphous fraction as a function of fluence was revealed by XRD and Raman analyses and is evidenced by the reduction in intensity of the sharp Bragg maxima from the crystalline regions. Concurrently, diffraction maxima and vibrational absorption bands broaden with the increasing amorphous fraction. The cross-section for the crystalline-to-amorphous transformation (ion tracks) was determined by quantitative analysis of XRD patterns yielding a track diameter of d = 7.2 ± 0.9 nm. Slightly larger track diameters were obtained directly from TEM images (d = 10.6 ± 0.8 nm) and SAXS analysis (d = 10.6 ± 0.3 nm). High-resolution TEM images revealed that single tracks are entirely amorphous without any outer crystalline, disordered shell as found in pyrochlore oxides of the same stoichiometry. The large ratio of ionic radii of the A- and B-site cations (rA/rB = 1.94) means that disordering over the A- and B-sites is energetically unfavorable.

36 MATERIALS SCIENCE↗

Computation Of Flutter In Turbomachinery

"Direct" solution procedure supplants conventional eigenmode analysis. Iterative computational procedure yields critical mach number for onset of flutter and flutter angular frequency, of propfan, turbine with unshrouded blades, or other turbomachinery. Procedure applied to aeroelastic analysis of propfan, in which finite-element model of propfan structure combined with model of unsteady aerodynamics based on three-dimensional subsonic-lifting-surface theory. Particularly suitable for optimization in design because as optimal design evolves, flutter solution expected to change incrementally, so previous solution provides good estimates for start of current solution.

Murthy, Durbha V.↗

Wind Turbine Development at Montana State University

A survey of wind turbine blade manufacturers, repair companies, wind farm operators, and third party investigators has directed the focus of this investigation on several types of flaws commonly found in wind turbine blades: waviness and porosity/voids. Several commercial scale wind turbine blades were inspected for the development of metrics for the identification, analysis and disposition. Analysis of flaw geometries yielded metrics which utilize specific parameters to physically characterize a defect. Data as it relates flaw parameters to frequencies of occurrence have been complied. Basic statistical analysis shows that the frequency of flaw parameters generally follows standard distributions. A testing program was then developed around this flaw data. Results from static testing indicate that there is strong correlation between flaw parameters and mechanical response. Preliminary results from the in-field data collection effort and coupon level testing have established a protocol by which a defect in a blade can be characterized quantifiably. With this data it is possible to develop probabilistic analysis, damage progression models and criticality assessment tools that will enable improved blade design methodology and the development of a risk management framework which describes the probability of failure for blades with defects.

17 WIND ENERGY↗