Search NASA⌕ Search

SEARCH · Search NASA

Results for “AMPLITUDE MODULATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Photomechanical vibration of thin crystals of polar semiconductors

It was found that thin crystals of polar (non-centrosymmetric) semiconductors constitute a new type of photosensitive system in which incident illumination is converted into mechanical energy: thus, illumination-induced elastic deformation (bending) was observed on thin (00.1) CdS and (111) GaAs crystals; furthermore, by employing chopped light the crystals were excited to their resonant vibration (photomechanical vibration); the dependence of the amplitude of this vibration on the energy of the incident radiation was found to be similar to the dependence of the surface photovoltage on the energy of the incident radiation (surface photovoltage spectrum). The present findings are consistent with a model based on light-induced modulation of the piezoelectric surface stresses.

Lagowski, J.↗

Versatile LDV burst simulator

A device for generating burst signals is reported that can be used to determine whether or not a laser Doppler velocimeter is operating properly. A high frequency signal which corresponds to the information frequency of the laser Doppler velocimeter is modulated by a low frequency signal to provide an envelope for the high frequency signal. The high frequency signal is modulated by any modulator means such as, for example, an analog multiplier. The low frequency signal is added to the modulated signal to provide pedestals for the resulting series of burst pulses. The means are provided for selecting different combinations of these burst signals. Also means are provided for making the burst signals asymmetrical as desired. In addition, means are provided for varying the frequencies, and amplitudes of the information, envelope and pedestal frequency signals in the burst signals.

Youngbluth, O., Jr.↗

Fluctuations of inverted V electron fluxes

Fluctuations of low-energy electron fluxes during an inverted V event on Nov. 5, 1975 were detected by fixed-energy electrostatic analyzers used in the LEE (low-energy electron) experiment onboard the AE-D satellite. The flux fluctuations were observed at energies of 0.78, 1.38, and 2.62 keV, when these energies were below that of the monoenergetic beam. This suggests that the fluctuations might occur over a wide range of energies. The fluctuations were confined within a pitch angle of 15 degrees, the amplitude increasing with decreasing pitch angle. The oscillation frequencies centered around 1.75 Hz. Fluctuations at two energies were generally correlated. The heating of secondary electrons, deduced from an analysis of the distribution function, is attributed to anomalous heating by electron plasma wave turbulence, whose intensity was modulated by a low-frequency wave. The results are consistent with a model, according to which auroral precipitating electron beams enhance the anomalous resistivity at the topside ionosphere through parametric instabilities.

Lin, C. S.↗

Application of a new X-ray reflection model to V1223 Sagittarii

In intermediate polars (IPs), the intrinsic thermal emissions from white dwarfs (WDs) have typically been studied. Few reports have analysed X-ray reflections from WDs. We recently developed an elaborate IP-reflection spectral model. Herein, we report the first application of a reflection model with an IP thermal model to the spectra of the brightest typical IP V1223 Sagittarii observed by the Suzaku and Nuclear Spectroscopic Telescope Array satellites. The model reasonably reproduces the spectra within the range of 5–78 keV and estimates the WD mass as 0.92 ± 0.02 Mꙩ. The WD mass estimated by the proposed model is consistent with that measured using an active galactic nucleus reflection model and a partial covering absorption model. However, the choice of incorrect parameter values, such as an unsuitable fitting energy band and an incorrect metal abundance, was found to introduce systematic errors (e.g. ≲0.2 Mꙩ in the WD mass) in the WD mass measurement. Our spin-phase-resolved analysis resulted in discoveries regarding the modulations of the equivalent width of the fluorescent iron K α line and the angle between the post-shock accretion column and the line of sight (viewing angle). The viewing angle anticorrelates approximately with the X-ray flux and has average and semi-amplitude values of 55° and 7°, respectively, which points towards two WD spin axis angles from the line of sight of 55° and 7°, respectively. Both estimated spin axis angles are different from the reported system inclination of 24°.

Takayuki Hayashi↗

The Role of Gravity Waves in Generating Equatorial Oscillations in Modulating Atmospheric Tides

We discuss a Numerical Spectral Mode (NSM) that extends from the ground up into the thermosphere and incorporates Hines' Doppler spread parameterization (DSP) for small scale gravity waves (GW). This model is applied to describe the seasonal variations in the mean zonal circulation, the semi-annual and quasi-biennial oscillations (SAO and QBO), as well as the tides and planetary waves in the middle atmosphere. Initial results showed that this model can reproduce the salient features observed, including the QBO extending into the upper mesosphere inferred from UARS measurements. The model has now been extended to simulate also: (a) the zonal circulation of the lower stratosphere and upper troposphere, and (b) the upwelling at equatorial latitudes associated with the Brewer Dobsen circulation that affects the dynamics significantly as pointed out by Dunkerton. Upward vertical winds increase the period of the QBO observed from the ground. To compensate for that, one needs to increase in the model the eddy diffusivity and the GW momentum flux, bringing the latter closer to values recommended in the DSP. This development is conducive to extending the QBO and SAO to higher latitudes through global scale momentum redistribution. Multi-year interannual oscillations are generated through wave filtering by the solar driven annual oscillation in the zonal circulation. In a 3D version of the model, wave momentum is absorbed and dissipated by tides and planetary waves. A somewhat larger GW source (well within the DSP range) is then required to generate realistic QBO and SAO amplitudes. Since GW momentum is deposited in the altitude regime of increasing winds, the amplitude of the diurnal tide is amplified and its vertical wavelength is reduced at altitudes between 70 and 120 km. Wave filtering by the mean zonal circulation causes the GW flux to peak during equinox, and this produces a large semi-annual variation in the tide that has been observed on UARS. Without the diurnal tide, the semidiurnal tide would also be modulated in this way. But the diurnal tide filters out the GW preferentially during equinox, so that the semidiurnal tide tends to peak during solstice. Under the influence of GW, the tides are modulated significantly by planetary waves that are generated preferentially during solstice in part due to baroclinic instability.

Mayr, H. G.↗

An MSK approach to offset QASK

This paper demonstrates that an offset quadrature amplitude-shift-keyed (OQASK) signal can be represented as an n-component version of a minimum-shift-keyed (MSK) signal. For example, the signal set obtained by summing two MSK signals which are 6 dB different in power and are formed by continuous phase, frequency modulating the same oscillator with two independent binary antipodal data streams, is spectrally equivalent to an OQASK signal set composed of 16 signals in which the symbol pulse is a half-cycle sinusoid rather than the conventional rectangular form. Such generalizations as the above allow for potentially simpler implementation of spectrally shaped OQASK.

Simon, M. K.↗

SPS antenna element evaluation

The SPS transmitting array requires an architecture which will provide a low weight, high efficiency and high structural rigidity. Waveguide slot arrays constitute the most desirable option. Consequently, such an array was chosen for the SPS. Waveguide slot arrays offer high efficiency, uniform illumination, and are fairly lightweight. Bandwidths of such arrays are narrow, typically 1/2-2%. Although this does not directly impact the SPS, which transmits power at a single frequency of 2.45 GHz, the narrow bandwidth does constrain the thermal and mechanical tolerances of the antenna. The purpose of this program is to better define the electronic aspects of an SPS specific waveguide slot array. The specific aims of the program are as follows: (1) To build a full-scale half-module, 10 stick, array, the design parameters for which are to be determined analytical considerations tempered by experimental data on a single slotted radiating stick, (2) To experimentally evaluate the completed array with respect to antenna pattern, impedance and return loss; and (3) To measure swept transmission amplitude and phase to provide a data base for design of a receiving antenna.

Lunden, C. D.↗

Development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements

The development of high temperature containerless processing equipment and the design and evaluation of associated systems required for microgravity materials processing and property measurements are discussed. Efforts were directed towards the following task areas: design and development of a High Temperature Acoustic Levitator (HAL) for containerless processing and property measurements at high temperatures; testing of the HAL module to establish this technology for use as a positioning device for microgravity uses; construction and evaluation of a brassboard hot wall Acoustic Levitation Furnace; construction and evaluation of a noncontact temperature measurement (NCTM) system based on AGEMA thermal imaging camera; construction of a prototype Division of Amplitude Polarimetric Pyrometer for NCTM of levitated specimens; evaluation of and recommendations for techniques to control contamination in containerless materials processing chambers; and evaluation of techniques for heating specimens to high temperatures for containerless materials experimentation.

Rey, Charles A.↗

Line profile variations in M giants - Clues to mass-loss and chromospheric heating mechanisms

Analysis is presented of time-series, high dispersion spectra of the Mg II, k, Ca II H, and K lines of the semiregular giants Rho Per (M4 II-III, periodicity of about 50 days), R Lyr (M5 III, period of about 46 days), and g Her (M6 III, period of about 90 days). The fine error sensor on the IUE satellite and ground based UBV photometry was used to relate line profile variations to photospheric variations. The above mentioned stars were selected to study the relative importance of convective motions and global stellar pulsations in determining the structure of the outer atmospheres. Small amplitude changes, but substantial changes in the profiles of Mg II and Ca II lines were detected. It is contended that the observed variability is due to changes in chromospheric conditions and not variations within the circumstellar shell. The picture of a steady state chromosphere, which is modulated on long time scales, is corroborated by these observations. Localized heating is found in g Her.

Judge, P. G.↗

In-depth Analysis of LISA Pathfinder Performance Results: Time Evolution, Noise Projection, Physical Models, and Implications for LISA

We present an in-depth analysis of the LISA Pathfinder differential acceleration performance over the entire course of its science operations, spanning approximately 500 days. We find: (1) The evolution of the Brownian noise that dominates the acceleration amplitude spectral density (ASD), for frequencies f≳1 mHz, is consistent with the decaying pressure due to the outgassing of a single gaseous species. (2) Between f=36 μHz and 1 mHz, the acceleration ASD shows a 1/f tail in excess of the Brownian noise of almost constant amplitude, with ≃20% fluctuations over a period of a few days, with no particular time pattern over the course of the mission. (3) At the lowest considered frequency of f=18 μHz, the ASD significantly deviates from the 1/f behavior, because of temperature fluctuations that appear to modulate a quasistatic pressure gradient, sustained by the asymmetries of the outgassing pattern. We also present the results of a projection of the observed acceleration noise on the potential sources for which we had either a direct correlation measurement or a quantitative estimate from dedicated experiments. These sources account for approximately 40% of the noise power in the 1/f tail. Finally, we analyze the possible sources of the remaining unexplained fraction and identify the possible measures that may be taken to keep those under control in LISA.

M Armano↗

Evaluation of thick wall wave guide element

The SPS transmitting array requires an architecture which will provide a low weight, high efficiency and high structural rigidity. As noted above, waveguide slot arrays constitute the most desirable option. Consequently, such an array has been chosen for the SPS. Waveguide slot arrays offer high efficiency, uniform illumination, are are fairly lighweight. Bandwidths of such arrays are narrow, typically 1/2-2%. Although this does not directly impact the SPS, which transmits power at a single frequency of 2.45 GHz, the narrow bandwidth does constrain the thermal and mechanical tolerances of the antenna. The purpose of this program is to better define the electronic aspects of an SPS specific waveguide slot array. The specific aims of the program are as follows: (1) To build a full-scale half-module, 10 stick, array, the design parameters for which are to be determined by analytical considerations tempered by experimental data on a single slotted radiating stick, (2) To experimentally evaluate the completed array with respect to antenna pattern, impedance and return loss, and (3) To measure swept transmission amplitude and phase to provide a data base for design of a receiving antenna.

Nalos, E. J.↗

Is 1220 Crocus a precessing, binary asteroid?

Photoelectric data of the asteroid 1220 Crocus over a 13 night period in 1984 revealed the presence of two separate periods. The light curves were indicative of a precessing body, but not one in free precession due to motions induced by a collision. Closer examinations revealed periods of 30.7 and 7.9 hr with amplitudes of 0.87 and 0.15 mag, respectively. An analysis of the source of an external torque which could be causing a forced precession led to the hypothesis that 1220 Crocus has a satellite. Verification of the binary asteroid configuration will depend on more detailed light curves, the possible modulation of the shorter period by the longer, and possible use of the Space Telescope.

Binzel, R. P.↗

Secondary instability in rotating-disk flow

Primary instability of the 3D boundary layer on a rotating disk introduces periodic modulation of the mean flow in the form of stationary crossflow vortices. We study the stability of this modulated mean flow with respect to secondary disturbances. Both fundamental and subharmonic resonance cases are considered, and their corresponding results indicate that the growth rate and the frequency of the secondary instability are insensitive to the exact nature of the resonance condition. The threshold primary stationary crossflow vortex amplitude for secondary instability found in this 3D incompressible boundary layer is significantly larger than that for a 2D boundary layer which is subjected to Tollmien-Schlichting instability. The secondary instability results in a pair of travelling counter-rotating vortices, tilted up and oriented at an angle to the primary stationary crossflow vortices.

Balachandar, S.↗

Control Electronics For Reaction Wheel

Bidirectional operation achieved with single-polarity main power supply. Control circuitry generates pulse-width-modulated 800-Hz waveforms to drive two-phase ac motor and reaction wheel. Operates partly in response to digital magnitude-and-direction torque command generated by external control subsystem and partly in response to tachometric feedback in form of two once-per-revolution sinusoids with amplitudes proportional to speed. Operation in either of two modes called "normal" and "safehold." In normal mode, drive pulses timed so that, on average over one or few cycles, motor applies commanded torque. In safehold mode, pulses timed to keep motor running at set speed in one direction.

Chamberlin, Keith↗

Characteristic recovery times of Forbush-type decreases in the cosmic radiation. I - Observations at earth at different energies

Data on 30 asymmetric Forbush decreases recorded by the IMP spacecraft at 1 AU and the Mt. Washington neutron monitor over the period 1972-84 are examined to characterize the recovery characteristics of cosmic rays after the events. The spacecraft data are concentrated at energies of 1.7 GV, while the terrestrial instruments recorded events at 5 GV. Attention is paid to the relative amplitudes of the recorded transient decreases, the characteristic recovery times, and the energy dependence of the amplitudes and recovery time. The recovery times were found to be equal at both energy levels, supporting a concept of energy independence for the recoveries. Also, no correlations were found between the recovery times and the occurrences of a solar magnetic field reversal or with phase in the solar modulation cycle. A time-dependent, two-dimensional model is defined, which expresses the cosmic ray particle distributions as a function of the decay of the disturbance, with a small dependence on the transport parameters of the cosmic rays.

Lockwood, J. A.↗

Influence of cross-flow on nonlinear Tollmien-Schlichting/vortex interaction

The transition of an incompressible three-dimensional boundary layer with strong cross-flow is considered theoretically and computationally in the context of vortex/wave interactions. Specifically the work centers on two lower-branch Tollmien-Schlichting waves which mutually interact nonlinearly to induce a longitudinal vortex flow. The vortex motion in turn gives rise to significant wave modulation via wall-shear forcing. The characteristic Reynolds number is large and, as a consequence, the waves' and the vortex motion are governed primarily by triple deck theory. The nonlinear interaction is captured by a viscous partial-differential system for the vortex coupled with a pair of amplitude equations for each wave pressure. Following analysis and computation over a wide range of parameters, three distinct responses are found to emerge in the nonlinear behavior of the flow solution downstream: an algebraic finite-distance singularity, far-downstream saturation or far-downstream wave decay leaving pure vortex flow. These depend on the input conditions, the wave angles and the size of the cross flow.

Davis, D. A. R.↗

The QBO as Potential Amplifier and Conduit to Lower Altitudes of Solar Cycle Influence

In several papers, the solar cycle (SC) effect in the lower atmosphere has been linked to the Quasi-biennial Oscillation (QBO), which is generated primarily by small-scale gravity waves. Salby and Callaghan (2000) analyzed the observed zonal winds of the QBO over more than 40 years and found that it contains a relatively large SC signature at 20 km. Following up on an earlier 2D study with our global-scale Numerical Spectral Model (NSM), we discuss here a 3D study with the QBO under the influence of the SC. For a SC period of 10 years, the amplitude of the relative variations of radiative forcing is taken to vary for simplicity from 0.2% at the surface to 2% at 50 km to 20% at 100 km and above. Covering a limited time span of 40 years, this model produces in the lower stratosphere a relatively large modulation of the QBO, which appears to be related to the SC and is in qualitative agreement with the observations. Some of the energy in the QBO, confined to low latitudes primarily, is redistributed globally by the meridional circulation and planetary waves presumably, so that a measurable SC modulation is generated in the tropospheric temperatures of the polar regions. Further studies are needed, (1) to determine whether the effect is real and prevails in more extensive simulations and whether the results are robust when shorter integration steps are employed, and (2) to explore the mechanism(s) that may ample the apparent SC influence of the UV radiation extending into the lower atmosphere. Quasi-decadal oscillations, generated internally by the QBO interacting with the seasonal cycles, may interfere with or aid the SC effect.

Mayr, Hans G.↗

Higher Order Parametric Excitation Modes for Spaceborne Quadrupole Mass Spectrometers

This paper describes a technique to significantly improve upon the mass peak shape and mass resolution of spaceborne quadrupole mass spectrometers (QMSs) through higher order auxiliary excitation of the quadrupole field. Using a novel multiresonant tank circuit, additional frequency components can be used to drive modulating voltages on the quadrupole rods in a practical manner, suitable for both improved commercial applications and spaceflight instruments. Auxiliary excitation at frequencies near twice that of the fundamental quadrupole RF frequency provides the advantages of previously studied parametric excitation techniques, but with the added benefit of increased sensed excitation amplitude dynamic range and the ability to operate voltage scan lines through the center of upper stability islands. Using a field programmable gate array, the amplitudes and frequencies of all QMS signals are digitally generated and managed, providing a robust and stable voltage control system. These techniques are experimentally verified through an interface with a commercial Pfeiffer QMG422 quadrupole rod system.When operating through the center of a stability island formed from higher order auxiliary excitation, approximately 50% and 400% improvements in 1% mass resolution and peak stability were measured, respectively, when compared with traditional QMS operation. Although tested with a circular rod system, the presented techniques have the potential to improve the performance of both circular and hyperbolic rod geometry QMS sensors.

Gershman, D. J.↗