Search NASA⌕ Search

SEARCH · Search NASA

Results for “ATOMIC MODELS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Development of high-fidelity models for liquid fuel spray atomization and mixing processes in transportation and energy systems

Significant inadequacies of current models for multiphase flows present a major barrier to rapid development of advanced high-efficiency low-emissions combustion devices. Liquid spray atomization processes largely determine fuel-air mixture formation, which subsequently govern combustion and controls performance, emissions, and durability of a device. The current study presents a fundamentally-consistent framework to model the effects of breakup processes, liquid drop deformations, and internal flow dynamics on mass, momentum, and energy exchange functions. This framework builds on the Taylor Analogy Breakup (TAB) model which naturally quantifies local drop deformation dynamics. Real-fluid multicomponent thermodynamic property modeling and Gradient Theory simulations facilitate accurate calculations of molecular two-phase interface exchange functions, surface tensions forces, drop oscillations, and breakup processes. The analysis establishes that these drop dynamics, along with finite liquid viscosity effects, significantly alter gas-liquid exchange functions. The study quantifies these effects for the resulting drag coefficients of liquid drops and demonstrates significant deviations from the classic dynamic drag model, which is widely applied in modern simulations performed in academia and industry. This work also quantifies effects, which originate from gas-liquid coupling dynamics, on evaporation and heating rates. The analysis establishes that the consideration of these coupling dynamics modify mass and energy transfer rates even more significantly than the corresponding drag forces from momentum exchange. This physical complexity, however, is largely neglected in modern studies from academia and industry. A new set of equations is presented to improve the modeling of drop breakup processes to address the current shortcomings in the prediction of resulting drops proper- ties over the full range of relevant breakup conditions. The framework is based on a refined energy balance equation which explicitly enforces drop momentum conservation during the breakup process. The introduced modeling framework is entirely derived from conservation equations for mass, momentum, and energy and does not, as a consequence, introduce new modeling constants. The significance of the developed modeling advances to fuel injection processes is demonstrated using Large Eddy Simulation (LES) with a Lagrangian-Eulerian modeling approach.

42 ENGINEERING↗

Towards Spatial Control of Reaction Selectivity on Photocatalysts using Area Selective Atomic Layer Deposition on Model Dual Site Electrocatalyst Platform

Photocatalytic water splitting is a promising route to low-cost H2; however, this approach is currently limited by solar-to-hydrogen (STH) conversion efficiencies in the sub-10% range. Z-scheme water splitting, in which H2 and O2 evolving particles are operated in separate compartments and electronically coupled by a soluble redox mediator, offers improvements in STH efficiency but introduces high rates of undesired side and back reactions. Nanoscopic oxide coatings (e.g., CrOx, and SiOx) have previously been used to selectively block undesired reactants from reaching active sites; however, a coating encapsulating the entire photocatalyst particle limits activity as the particle can no longer facilitate both half reactions. In contrast to photodeposition, which may produce non-uniform overlayers due to the difficulty of controlling local electrochemical reactivity on the surface, area-selective atomic layer deposition (AS-ALD) can be used to deposit conformal ultrathin oxide coatings while preserving access to non-growth areas of a substrate surface. To develop this technique for Z-scheme photocatalysts, we performed AS-ALD of TiO2 on a dual site planar electrocatalyst based on interdigitated arrays of Pt and Au. Self-assembled monolayers of 1-octadecanethiol (ODT) were used to block growth on the Au array, resulting in a patterned surface in which only the Pt sites were encapsulated with TiO2. These electrocatalysts demonstrated localized reaction selectivity for hydrogen evolution reaction (HER) over the TiO2/Pt sites, while the uncoated Au sites retained activity towards Fe(II)/Fe(III) redox (FeRR). Under independent potential control, these microelectrodes showed that selectively deposited TiO2 coatings can suppress the rate of back reactions on neighboring active sites by an order of magnitude compared to uncoated control samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fano-Hopfield model and photonic band gaps for an arbitrary atomic lattice

We study the light dispersion relation in a periodic ensemble of atoms at fixed positions in the Fano-Hopfield model (the atomic dipole being modeled with harmonic oscillators). Compared to earlier works, we do not restrict to cubic lattices, and we do not regularize the theory by hand but we renormalize it in a systematic way using a Gaussian cutoff in momentum space. Whereas no omnidirectional spectral gap is known for light in a Bravais atomic lattice, we find that, for a wide range of parameters, an omnidirectional gap occurs in a diamond atomic lattice, which may be realized in an experiment with ultracold atoms. The long-wavelength limit of the theory also provides a Lorentz-Lorenz (or Clausius-Mossotti) relation for an arbitrary lattice.

74 ATOMIC AND MOLECULAR PHYSICS↗

In-situ Study of Dynamic Phenomena at Metal Nanosolder Interfaces Using Aberration Corrected Scanning Transmission Electron Microcopy.

Controlling metallic nanoparticle (NP) interactions plays a vital role in the development of new joining techniques (nanosolder) that bond at lower processing temperatures but remain viable at higher temperatures. The pr imary objective of this project is t o develop a fundamental understanding of the actual reaction processes, associated atomic mechanisms, and the resulting microstructure that occur during thermally - driven bond formation concerning metal - metal nano - scale (%3C50nm) interfaces. In this LDRD pr oject, we have studied metallic NPs interaction at the elevated temperatures by combining in - situ transmission electron microscopy (TEM ) using an aberration - corrected scanning transmission electron microscope (AC - STEM) and atomic - scale modeling such as m olecular dynamic (MD) simulations. Various metallic NPs such as Ag, Cu and Au are synthesized by chemical routines. Numerous in - situ e xperiments were carried out with focus of the research on study of Ag - Cu system. For the first time, using in - situ STEM he ating experiments , we directly observed t he formation of a 3 - dimensional (3 - D) epitaxial Cu - Ag core - shell nanoparticle during the thermal interaction of Cu and Ag NPs at elevated temperatures (150 - 300 o C). The reaction takes place at temperatures as low as 150 o C and was only observed when care was taken to circumvent the effects of electron beam irradiation during STEM imaging. Atomic - scale modeling verified that the Cu - Ag core - shell structure is energetically favored, and indicated that this phenomenon is a nano - scale effect related to the large surface - to - volume ratio of the NPs. The observation potentially can be used for developing new nanosolder technology that uses Ag shell as the "glue" that stic ks the particles of Cu together. The LDRD has led to several journal publications and numerous conference presentations, and a TA. In addition, we have developed new TEM characterization techniques and phase - field modeling tools that can be used for future materials research at Sandia. Acknowledgeme nts This work was supported by the Laboratory Directed Research and Development (LDRD) program of Sandia National Laboratories. Sandia National Laboratories is a multi - program laboratory managed and operated by Sandia Corporation, a wholly owned subsidia ry of Lockheed Martin Corporation, for the US Department of Energy's National Nuclear Security Administration under contract DE - AC04 - 94AL85000.

Lu, Ping↗

Solving many-body Schrödinger equations with kinetic energy partition method

We present a general formulation of our previously developed kinetic energy partition (KEP) method for solving many-bodySchrödinger equations. In atomic physics, as well as in general molecular and solid state physics, solving many-electronSchrödinger equations is a very challenging task, often called Dirac’s challenge. The central problem is how to properly handle the electron–electron Coulomb repulsion interactions. Using the KEP solution scheme, in addition to dividing the kinetic energy into partial terms, the electron–electron Coulomb interaction is also separated into parts to be associated with a “negative mass” kinetic energy term. Therefore, the full Hamiltonian can be expressed as a simple sum of subsystem Hamiltonians, each representing an effective one-body problem. Using a Hartree-like product in constructing the wave-function, we achieve fast convergence in the calculations of the ground state energies. First, the model Moshinsky atoms are used to illustrate the solution procedure. We then apply this new KEP method to harmonium atoms and obtain precise energies with an error less than 5% using only two basis functions from each subsystem. It is thus very promising that this methodology, when further extended, can be useful for general many-body systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Thermodynamics of the three-dimensional Hubbard model: Implications for cooling cold atomic gases in optical lattices

We present a comprehensive study of the thermodynamic properties of the three-dimensional fermionic Hubbard model, with application to cold fermionic atoms subject to an optical lattice and a trapping potential. Our study is focused on the temperature range of current experimental interest. We employ two theoretical methods - dynamical mean-field theory and high-temperature series - and perform comparative benchmarks to delimit their respective range of validity. Special attention is devoted to understand the implications that thermodynamic properties of this system have on cooling. Considering the distribution function of local occupancies in the inhomogeneous lattice, we show that, under adiabatic evolution, the variation of any observable (e.g., temperature) can be conveniently disentangled into two distinct contributions. The first contribution is due to the redistribution of atoms in the trap during the evolution, while the second one comes from the intrinsic change of the observable. Finally, we provide a simplified picture of a recently proposed cooling procedure, based on spatial entropy separation, by applying this method to an idealized model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The use of plasma ashers and Monte Carlo modeling for the projection of atomic oxygen durability of protected polymers in low Earth orbit

The results of ground laboratory and in-space exposure of polymeric materials to atomic oxygen has enabled the development of a Monte Carlo computational model which simulates the oxidation processes of both environments. The cost effective projection of long-term low-Earth-orbital durability of protected polymeric materials such as SiO(x)-coated polyimide Kapton photovoltaic array blankets will require ground-based testing to assure power system reliability. Although silicon dioxide thin film protective coatings can greatly extend the useful life of polymeric materials in ground-based testing, the projection of in-space durability based on these results can be made more reliable through the use of modeling which simulates the mechanistic properties of atomic oxygen interaction, and replicates test results in both environments. Techniques to project long-term performance of protected materials, such as the Space Station Freedom solar array blankets, are developed based on ground laboratory experiments, in-space experiments, and computational modeling.

Banks, Bruce A.↗

Thermalization of coupled atom-light states in the presence of optical collisions

The interaction of a two-level atomic ensemble with a quantized single-mode electromagnetic field in the presence of optical collisions is investigated both theoretically and experimentally. The main focus is on achieving thermal equilibrium for coupled atom-light states (in particular dressed states). We propose a model of atomic dressed-state thermalization that accounts for the evolution of the pseudo-spin Bloch vector components and characterize the essential role of the spontaneous emission rate in the thermalization process. Our model shows that the time of thermalization of the coupled atom-light states depends strictly on the ratio of the detuning to the resonant Rabi frequency. The predicted time of thermalization is in the nanosecond domain at full optical power and about 10 times shorter than the natural lifetime in our experiment. Experimentally we investigate the interaction of the optical field with rubidium atoms in an ultrahigh-pressure buffer gas cell under the conditions of large atom-field detuning comparable to the thermal energy in frequency units. In particular, an observed asymmetry of the saturated lineshape is interpreted as evidence of thermal equilibrium of coupled atom-light states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Coupled Cluster and Density Functional Studies of Atomic Fluorine Chemisorption on Coronene as Model Systems for Graphene Fluorination

Potential energy curves (PECs) of atomic fluorine adsorption on coronene as a model for graphene or nanocarbon surfaces have been computed. The PECs were obtained by scanning the fluorine atom distance to one of the center carbon atoms of the coronene molecule as model system in a “top” position from 4.0 to1.0 Å in intervals of 0.1 Å using a variety of quantum chemical methods. Various density functional theory (DFT) functionals, such as B3LYP, PBE, PBE0, CAM-B3LYP, and LC-ωPBE; approximate DFT methods such as several levels of the density-functional tight-binding (DFTB) method, as well as ab initio wave function theory methods such as MP2, CCSD, CCSD(T), and G2MS extrapolations, were used to evaluate energies for B3LYP/cc-pVDZ PEC geometries. G2MS is an approximation to the highly accurate CCSD(T)/cc-pVTZ level of theory in our work. We found that fluorine is chemically adsorbed on coronene with a binding energy of 22.9 and 23.3 kcal/mol at the B3LYP/cc-pVDZ and G2MS levels of theory, respectively, and 18.3 and 19.3 kcal/mol after counterpoise correction. Here, we found that pure DFT functionals and their DFTB approximations fail to predict the correct dissociation limit due to the DFT-inherent self-interaction error and various limitations in the DFTB approximation itself.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Extending electron orbital precession to the molecular case: Use of orbital alignment for observation of wavepacket dynamics

The complexity of ultrafast molecular photoionization presents an obstacle to the modeling of pump-probe experiments. Here, a simple optimized model of atomic rubidium is combined with a molecular dynamics model to predict quantitatively the results of a pump-probe experiment in which long-range rubidium dimers are first excited, then ionized after a variable delay. The method is illustrated by the outline of two proposed feasible experiments and the calculation of their outcomes. Both of these proposals use Feshbach {sup 87}Rb{sub 2} molecules. We show that long-range molecular pump-probe experiments should observe spin-orbit precession given a suitable pump pulse, and that the associated high-frequency beat signal in the ionization probability decays after a few tens of picoseconds. If the molecule was to be excited to only a single fine-structure state, then a low-frequency oscillation in the internuclear separation would be detectable through the time-dependent ionization cross section, giving a mechanism that would enable observation of coherent vibrational motion in this molecule.

74 ATOMIC AND MOLECULAR PHYSICS↗

Non-local correlation and quantum discord in two atoms in the non-degenerate model

By using geometric quantum discord (GQD) and measurement-induced nonlocality (MIN), quantum correlation is investigated for two atoms in the non-degenerate two-photon Tavis-Cummings model. It is shown that there is no asymptotic decay for MIN while asymptotic decay exists for GQD. Quantum correlations can be strengthened by introducing the dipole-dipole interaction. The evolvement period of quantum correlation gets shorter with the increase in the dipole-dipole parameter. It is found that there exists not only quantum nonlocality without entanglement but also quantum nonlocality without quantum discord. Also, the MIN and GQD are raised rather than entanglement, and also with weak initial entanglement, there are MIN and entanglement in a interval of death quantum discord. - Highlights: Black-Right-Pointing-Pointer Geometric quantum discord (GQD) and measurement induced nonlocality (MIN) are used to investigate the correlations of two two-level atoms. Black-Right-Pointing-Pointer There is no asymptotic decay for MIN while asymptotic decay exists for GQD. Black-Right-Pointing-Pointer Quantum correlations can be strengthened by introducing the dipole-dipole interaction. Black-Right-Pointing-Pointer There exists not only quantum nonlocality without entanglement but also without discord. Black-Right-Pointing-Pointer Weak initial entanglement leads to MIN and entanglement in intervals of death discord.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Features of the microstructure development under conditions, reproducing the process of friction stir welding. Molecular-dynamics study

Friction stir welding is a recently developed technology which is used in various branches of modern engineering. The basis of this technology is the friction of the rotating cylindrical or specially shaped tool between two metal plates brought together either to meet their ends of one above another with the overlap. When applying the FSW process in various economical sectors, the important task is to study the mechanisms and identify the physical laws and factors leading to formation of structural inhomogeneities and discontinuities in the weld seam. This paper analyzes the basic mechanisms behind the structural state generation in the material subjected to severe plastic deformation and heating. To investigate the atomic mechanisms of structural changes in FSW, the modeling at atomic scale has been carried out. Results of work can be a basis for new knowledge about the microstructure evolution in FSW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗