Search NASA⌕ Search

SEARCH · Search NASA

Results for “Building Structural Design”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Need for development of higher strength cryogenic structural materials for fusion magnet

A prototype fusion reactor is targeted as a beyond ITER project which is so called DEMO. Several conceptual designs have been carried out. Recently, in order to recognize practical aspects on maintenance of the prototype reactor, the replacement procedure of in-vessel components was focused and “sector process” was proposed. The process is that the reactor consists of sectors and all sectors will be drowned and replaced in a short time. The slim coil which generated higher magnetic field is required to realize the sector process. From the point of coil design, the occupancy of the structural material on the cross section of the coil increases with an increase of magnetic field. To realize the slim coil, the cryogenic structural material with higher yield strength and the proper toughness is desired.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Building America Case Study: Initial and Long-Term Movement of Cladding Installed Over Exterior Rigid Insulation (Fact Sheet)

Changes in the International Energy Conservation Code (IECC) from 2009 to 2012 have resulted in the use of exterior rigid insulation becoming part of the prescriptive code requirements. With more jurisdictions adopting the 2012 IECC builders are going to finding themselves required to incorporate exterior insulation in the construction of their exterior wall assemblies. For thick layers of exterior insulation (levels greater than 1.5 inches), the use wood furring strips attached through the insulation back to the structure has been used by many contractors and designers as a means to provide a convenient cladding attachment location. However, there has been a significant resistance to its widespread implementation due to a lack of research and understanding of the mechanisms involved and potential creep effects of the assembly under the sustained dead load of a cladding. This research was an extension on previous research conducted by BSC in 2011, and 2012. Each year the understanding of the system discrete load component interactions, as well as impacts of environmental loading has increased. The focus of the research was to examine more closely the impacts of screw fastener bending on the total system capacity, effects of thermal expansion and contraction of materials on the compressive forces in the assembly, as well as to analyze a full years worth of cladding movement data from assemblies constructed in an exposed outdoor environment.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

NDT System for Metal Components in Concrete Structures (Final Report)

Steel reinforcements embedded within concrete can corrode and crack, leading to weakening of the structures, and existing NDT (non-destructive testing) techniques do not provide the full picture. Condition assessment is critical in evaluating these structures in order to ensure safe, long-term operation of the nuclear power plants. Improved NDT techniques are needed as the nation’s generating stations age and require action based on increasingly critical inspection data. The power industry uses eddy current test (ECT) during in-service inspections to detect and monitor defects such as cracks and corrosion in metals, particularly metal pipes. However, the detection of defects in the reinforcing steel embedded in concrete is far more challenging for numerous reasons. Primary among them is the concrete layer’s thickness, which prevents the ability to have a close proximity between sensor and metallic sample. One solution to this problem is to create a higher sensitivity technique which can inspect at depth, with good spatial resolution and excellent directional sensitivity, to isolate the metal buried deep in the concrete and characterize defects in the metal. The goal of the phase II research program was to study and develop a new reinforced concrete NDT technology based on anisotropic magnetoresistive (AMR) sensors designed specifically for ECT of steel reinforcements in concrete. The first technical objective was to demonstrate the capability of inspecting steel reinforcement structures, including metal rebar and tensioning cable at or below 6” of depth embedded in concrete. Another objective was to be able to confidently identify multiple layers of reinforcements at varying depths. In addition, the technique needed to be able to provide condition assessment of the metal, providing data on the structure and positioning of the steel members, material loss, and detection of the presence of breaks. An important part of the research and development was aimed at achieving superior performance compared to existing technology. The ability to detect corrosion breaks in unbonded multi-wire and multi-strand tendons was another important objective. The final objective that led to a successful program was to build a complete prototype portable scanning system capable of demonstrating the probe performance in the field. All of these objectives were met, which provided data for the system development work going forward. RMD worked with the engineering firm Simpson Gumpertz & Heger to develop a detailed problem definition for concrete structures and the necessary sensor specifications. In addition, we developed finite element simulation models for the eddy current based NDT system through the analysis of the electromagnetic (EM) properties of sample materials and the orientation of the transmitter, sensor array (receivers), metal, and intervening materials like concrete and air. Based on the modeling and specifications, we designed and fabricated prototype sensor modules. We then acquired and fabricated test samples to characterize and optimize the sensors. Finally, we built a complete prototype for testing on actual concrete structures. This new NDT technology has high promise for greatly improving capabilities in the inspection of steel reinforcements within concrete structures, such as rebar, liners, anchors, and prestressing cables. This method could be valuable in the maintenance of nuclear power plants, and many other structures critical to our nation’s infrastructure.

42 ENGINEERING↗

A comparative study on cubic and tetragonal Ce-ZrO 2 supported Rh catalysts for N 2 O decomposition

Zirconium oxide (ZrO 2 ) exhibits strong synergy with cerium oxide (CeO 2 ), acting as a structural and electronic promoter during catalytic redox reactions. As a result, Ce-ZrO 2 composite oxides are widely used as supports in various catalytic systems. In our previous work, we demonstrated that the incorporation of Zr 4+ into the CeO 2 lattice significantly enhanced Rh dispersion, improved redox ability, and stabilized surface Rh species, which collectively boosted the de-N 2 O activity of Rh/Ce-ZrO 2 catalysts. Building on these findings, the present study emphasizes that the crystallographic phase of Ce-ZrO 2 , governed by the Ce/Zr ratio, plays a decisive role in tuning the physicochemical environment of Rh active sites and thereby optimizing catalytic performance. In conclusion, tailoring the Ce/Zr ratio to favor the cubic fluorite structure emerges as a promising strategy for the rational design of highly active and stable catalysts for N 2 O decomposition and potentially other redox-sensitive environmental applications.

36 MATERIALS SCIENCE↗

TeraChem: Accelerating electronic structure and ab initio molecular dynamics with graphical processing units

Developed over the past decade, TeraChem is an electronic structure and ab initio molecular dynamics software package designed from the ground up to leverage graphics processing units (GPUs) to perform large-scale ground and excited state quantum chemistry calculations in the gas and the condensed phase. TeraChem’s speed stems from the reformulation of conventional electronic structure theories in terms of a set of individually optimized high-performance electronic structure operations (e.g., Coulomb and exchange matrix builds, one- and two-particle density matrix builds) and rank-reduction techniques (e.g., tensor hypercontraction). Recent efforts have encapsulated these core operations and provided language-agnostic interfaces. Finally, this greatly increases the accessibility and flexibility of TeraChem as a platform to develop new electronic structure methods on GPUs and provides clear optimization targets for emerging parallel computing architectures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dynamic Performance Comparison and Prediction based on Distribution-level Phasor Measurement Units

This paper introduces a new distribution level Phasor Measurement Unit (PMU) which adopts advanced hardware components and structure. The hardware parameters from the new PMU and the existing PMU are used to build a simulation model to predict the PMU performance. Therefore, a real-world testbench is built and four distribution level PMUs are tested under the steady-state and dynamic tests. The quantitative experiment result confirms the prediction model which could guide future PMU design, and also verifies the accuracy of the new PMU on the synchrophasor and frequency measurements in multiple scenarios.

Wu, Yuru↗

Progress on the Design Development for Hard Core Components for USDA Diagnostics at ITER

An ITER hard core component (HCC) is defined for each undesirable situation with cliff edge effect consequences. Such structure system components (SCCs) are designed to prevent these situations at nuclear power plants, as well as to return and maintain a safe state in the event such a situation occurs. Only two hard core situations can really lead to cliff edge effect unless HCCs are implemented to limit the consequences: extreme earthquake (SL-3) and multiples fire in tritium building initiated by SL-3. The equipment (window and/or shutter) that closes penetrations from both sides of gallery to outside (Diagnostic building, Tritium building, and Assembly building) are classified as HCCs and SIC-2. Furthermore, design status of the HCC penetrations belong to US ITER diagnostic systems will be presented in this publication.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of Covariances in a Consistent Data Assimilation for Improvement of Basic Nuclear Parameters in Nuclear Reactor Applications: From Meters to Femtometers

Recognition of the key role physics plays in innovative reactor design was already made clear by E. Wigner in his warning: “It has been a bit forgotten that in all really creative thinking in reactor design, a working knowledge of nuclear reaction theory is required.” More recently, extensive sensitivity and uncertainty studies and the availability of new covariance data have allowed preliminary quantification of the impact of current nuclear data uncertainties on the design parameters of the Generation-IV systems (both fast neutron and thermal neutron systems). Similar quantifications can be done for the parameters that characterize the associated innovative fuel cycle to insure sustainability, waste minimization and drastic reduction of the proliferation risks. In parallel, there has been a growing and very significant trend to develop a new generation of reactor simulation tools that rely more and more on first principles. It is safe to say that the next generation of innovative nuclear systems will be assessed with a completely new set of tools, more science based, in sharp contrast with what has been done in the past. However, the studies mentioned above point out that the present uncertainties in nuclear data should be significantly reduced in order to fully benefit from advances in modeling and simulation. Only a parallel effort in advanced simulation and nuclear data improvement will be able to provide designers with more general and well validated calculational tools to meet new design target accuracies. One further consideration related to the development of new advanced simulation tools is that there should be a more explicit link with the more fundamental physics parameters underlying the models used to describe cross sections that would avoid the use of processed, application-oriented, data (like multigroup cross sections). Finally, current methodologies for reducing uncertainties coming from nuclear data, which rely on the use of integral experiment information to perform statistical multigroup (i.e., energy spectrum weighted) cross section data assimilation should evolve to embrace new frontiers in advanced simulation. One of the drawbacks of the classical methodologies is related to the energy group structure and the type of neutron energy spectrum that are adopted in the assimilation (adjustment). In fact, after such an adjustment is performed, neutronic designers are then tied to this energy group structure and neutron energy spectrum when carrying out further calculations. In reality, this can be quite a limiting factor in view of the complex spectral issues that are involved in most reactor physics. This work combines novel, but proven, methodologies for overcoming these limitations. In fact, this is the first attempt to build up a link between the wealth of precise integral experiments and a basic theory of nuclear reactions. Essential ingredients of such a procedure, denominated here as assimilation, are covariances for model parameters and sensitivity matrices. The latter provide direct link between reaction theory and integral experiments. The result is a consistent data assimilation performed directly on the basic nuclear physics parameters that are being used in a variety of nuclear reaction mechanisms. The resulting improvement in their performance will consequently reduce related uncertainties when employed in reactor calculations. By using integral reactor physics experiments (meter scale), information is propagated back to the nuclear physics level (femtometers) covering a range of more than 13 orders of magnitude. The assimilation procedure should result in more accurate and more reliable evaluated data files of universal validity rather than tailored to a particular application. In fact, after data assimilation is carried out, the basic nuclear data file can be processed by a dedicated code into any energy group structure that the reactor physicist deems to be useful. On the other hand, integral experiments used in the assimilation should provide additional, possibly quite strict, constraints on the parameters entering nuclear reaction modeling, as well as the reaction models themselves. This report describes three years of combined research by Brookhaben National Lab (BNL) and Idaho National Lab (INL) on establishing viable assimilation methodology. The emphasis of this paper is on the empire code calculations to prepare the priors, sensitivity matrices and covariances for the model parameters. For completeness, we also include a short summary of the assimilation results produced by INL and reported earlier in annual reports [6], [7], [8].

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

The Nest Home

The purpose of the project was to build a competitive solar-powered house for the U.S. Department of Energy Solar Decathlon 2015 held in Irvine, California. The house, named the Nest Home, was an innovative design that works with the environment to meet the needs of the occupants, identified as a growing family. Reused materials were instrumental in the design. Three refurbished shipping containers composed the primary structure of the house, creating an open floor plan that defies common architecture for container homes. The exterior siding was made of deconstructed shipping pallets collected locally. Other recycled products included carpet composed of discarded fishing nets, denim batting made of recycled blue jeans that outperform traditional fiberglass insulation in sound proofing and thermal resistance, and kitchen cabinets that were purchased used and refinished. Collectively these elements formed a well-balanced blend of modern design, comfort, and sustainability. The house was Missouri University of Science and Technology’s sixth entry in the DOE Solar Decathlon. Missouri S&T has been invited to compete in six of the seven decathlons held, more than any other university worldwide. The house was brought back to Rolla after the Decathlon in California where it has been placed in its permanent location on the S&T campus.

14 SOLAR ENERGY↗

Accelerating Biomimetic Solar - Energy Harvesting: Mapping the Interaction Landscape of Plasmonic-Excitonic Hybrid Nanosystems (Final Report)

In general, excitonic and plasmonic nanoscale materials in close proximity show high potential for significant breakthroughs in energy related materials research. The interactions between these two kinds of materials result in coupled optical transitions (plexcitons), distinct from those of both the individual exciton and plasmon as well as from those of the sum of their constituents (synergistic effects). By linking together materials-research and physical-research approaches, this project contributes to a concerted approach on nanomaterials energy research. The project’s overall goal is to accelerate the development of well-defined plexcitonic model systems consisting of carefully engineered plasmonic and excitonic nanomaterial— essential for both gaining a fundamental understanding of plexcitonic nanomaterials and the development of novel design principles for biomimetic solar energy harvesting. During the 3-year project period and the terminal renewal with limited support for a 12-month period, we successfully synthesized and characterized (1) a robust excitonic nanomaterial and (2) a library of plasmonic nanoparticles as well as developed (3) a microfluidic platform for homogenous nanosynthesis as summarized below: (1) Robust Excitonic Nanomaterial. Supramolecular assemblies are Nature’s most successful material system for solar energy harvesting. However, photovoltaic devices based on artificial supramolecular assemblies continue to be stymied by disappointing efficiencies and poor stability. The conceptual failure may lie in current solar cell architectures, which rely on solidifying supramolecular assemblies as an ensemble into a solid matrix, neglecting the intrinsic fragility of the assemblies’ internal structure, thus disrupting or even destroying their delicate optoelectronic properties, that is, delicate Frenkel excitonic properties. Supramolecular assemblies may finally serve as usable light harvesting material systems for solar energy conversion technologies, only if they meet the following criteria: (a) Stability, that is, the fragile structure including its delicate Frenkel excitonic character needs to be stable, (b) Robustness, that is, resistant against elevated and fluctuating temperatures, and (c) Viability for device integration, that is, capable of being immobilized onto solid substrates. Here, by developing a nanocomposite via a tunable, cage-like scaffold design, we successfully provided stable supramolecular nanocomposites, that inhabit robust Frenkel excitons despite harming environmental conditions such as extreme heat stress. (2) Library of Plasmonic Nanoparticles. Naturally, current models describing plasmonic hybrid quantum states—plasmonic hybridizations—parallel those developed for molecular orbitals, equating individual plasmonic nanostructures with “atoms” and the plasmonic nanoassemblies with “molecules.” In analogy to organic synthesis, a suitably robust fabrication method would allow for “atom-like” manipulation of “molecule-like” plasmonic nanoassemblies; of high value for next-generation energy nanotechnologies. Despite this frequent comparison, current plasmonic nanoassembly fabrication methods favor top-down templating over wet-chemical synthesis, however, achieving precise control over nanostructure’s geometry and surface characteristics remain an art and a scientific challenge. The conceptual failure may lie in the current wet-chemical synthesis paradigm, as it relies on the accessibility of a multi-dimensional synthesis parameter space through limited, rather one-dimensional synthesis procedures by employing step-by-step approaches. Solution-based nanoarchitectonics for rational design of precisely built plasmonic nanoassemblies via solution-based fabrication may finally be possible only if multi-dimensional syntheses approaches are available that allow for comprehensive control over the plasmonic nanomaterials’ (a) Structural Properties and (b) Surface Properties. Here, by developing an innovative multidimensional 1,3-propanediol based polyol synthesis, we successfully provided control over the plasmonic building-block’s geometry (size and shape) together with its surface characteristics. Our results present a critical step toward the vision of a “periodic table-like” system for plasmonic materials based on straightforward wet-chemical syntheses for energy nanotechnologies. Developing deliberate modifications on this synthesis, we generated a library of plasmonic nanostructures covering the vast parameter space—opening the door for fundamental investigation of plexcitonic model systems. (3) Microfluidic Platform for Homogenous Nanosynthesis. Control over structural properties of plexcitonic nanocomposites remains a challenge due to current limitations in nanosynthesis techniques. Slight variations in nanostructure’s geometry impact their optoelectronic properties, demanding precise synthesis beyond the capabilities of solution-based (batch) synthesis processes. In contrast, the small, confined liquid volumes used in microfluidics—a reaction technique where the manipulation of fluids takes place in channels with dimensions of tens of micrometers—allows for homogenous synthesis conditions, providing excellent control of the reaction and, as a result, of the materials’ geopmetry and composition. However, thus far, the majority of plexcitonic systems has been developed via batch synthesis. Here, by successfully developing a two-channel microreactor, our microfluidic-supported synthesis approach combines the advantages of both microfluidics and batch platforms, allowing for precise spatio-temporal control over all synthesis parameters opening the possibility for homogenous nanosythnesis of well-defined plexcitonic model systems.

14 SOLAR ENERGY↗

MODULARITY-AT-SCALE FOR COST COMPETITIVE DEPLOYMENT OF NUCLEAR ENERGY

Modularity options have been limited for traditional nuclear energy deployment due to the conventional light water reactor (LWR) safety requirements, such as high pressure retaining heavy and robust containment structures. However, a relatively new regulatory approach called ‘Functional Containment’ has potential to allow less expensive and more flexible designs for non LWRs. Functional containment provides flexibility in design and deployment based on risk informed and performance-based criteria, so that reactors are not over-designed. Non-nuclear industry has successfully used modular design approaches in automotive, aerospace, chemical processing, building construction, and ship building. These industries have shown that modular construction reduces construction time by around 30% - 50% compared to the conventional stick built approach. The nuclear industry can use similar approaches to reduce construction time and costs, balanced with safety requirements, using the functional containment approach. This paper discussing the background of modularity in nuclear energy, examples of less learned, modularity approaches in non-nuclear industries and the potential of cost and schedule savings through the emerging regulatory design flexibilities potentially enabling combination of modular deployment at different scales.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

An IAEA Initiative to Provide Effective Stakeholder Support Services for International Decommissioning and Environmental Remediation - 17341

The International Atomic Energy Agency (IAEA) has initiated a collaborative effort to promote stakeholder support activities through a stakeholder engagement advisory program (SEAP) as part of Phase II of the Constraints to Implementing Decommissioning and Environmental Remediation (CIDER II) program. CIDER II is a collaborative project involving a broad range of Member States, large and small, with ongoing and/or planned decommissioning and environmental remediation (D and ER) programs. The intent of this sub-group of CIDER II is to facilitate better sharing of information and knowledge in areas of stakeholder communication, engagement and participation, and a framework for directly using stakeholder input in the decision making process. The goal is to support trust building in D and ER decisions for radioactive contamination and facilities. A main premise of the CIDER II program is that stakeholder acceptance is necessary for successful D and ER decisions to be made. This paper introduces some of the major challenges to implementing such a broad scale of support for stakeholder engagement, and approaches to overcoming those challenges. Major challenges include the need to address D and ER decision making in different countries with their different languages, cultures, religions, management structures, and politics. For example, in some cases it might be important strategically to first garner support from upper levels of social, management or political hierarchies, including for example, approaching community leaders, and allowing those leaders to directly address their community. Other sites might have more success, for example, if stakeholder interaction starts with the community members. A specific project strategy also probably depends on who makes the request for stakeholder support services. Once the CIDER II SEAP gains traction, there will be a need to prioritize requests from Member States for assistance in connection with specific D and ER projects. A prioritization tool will be developed based on stakeholder engaged structured decision making (SDM). The projects in which support will initially be focused will span a wide range of D and ER problems, types of stakeholder groups, and technical issues such as potential risk to human health and the environment. A database management system will also be designed to capture information from the different proposed projects and will be expanded to house implemented projects for future reference. The case study database will be an integral part of a web-based system that also contains technical approaches for stakeholder involvement depending on the situational environment. A community of practice will be formed that will involve technical experts in stakeholder engagement and structured decision making, and informed representatives from Member States. This will address the need for SEAP to build capacity and provide education for solving D and ER problems. The web-based system will include technical tools for use by the projects, such as: identification of stakeholder groups; social network analysis (how stakeholders are connected); case study forms; best practice forms; information sheets; and 4tools that will directly support optimization of stakeholder guided solutions to D and ER problems. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Ultimate Strength of Metals

We present a theoretical model that predicts the peak strength of polycrystalline metals based on the activation energy (or stress) required to cause deformation via amorphization. Building on extensive earlier work, this model is based purely on materials properties, requires no adjustable parameters, and is shown to accurately predict the strength of four exemplar metals (fcc, bcc, and hcp, and an alloy). This framework reveals new routes for design of more complex high-strength materials systems, such as compositionally complex alloys, multiphase systems, nonmetals, and composite structures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Surface Science Studies of Nano-crystalline Metal Oxide and Metal-Metal Oxide Core-Shell Catalysts

In this project we are bridging the materials gap between fundamental surface science studies of metal-oxide, single-crystal model catalysts, and high surface catalysts that are used industrially by measuring structure-activity relationships for thin films of well-defined, metal oxide nanoparticles. We are concentrating on systems that are of interest for use as catalysts for complete-, selective- and photo-oxidation of organic oxygenates and the research program builds upon our group’s extensive experience in using surface-sensitive spectroscopic techniques to elucidate structure-activity relationships for oxide surfaces. The goals of this work are (1) determine the role that highly undercoordinated edge and corner sites play in catalysis on oxides, (2) determine if control of oxide nano-crystalline size and shape can be used to design highly active and selective catalysts for specific reactions, and (3) determine how crystallite size and shape affect the photocatalytic properties of semiconducting oxides such as TiO 2 . In addition to our current studies of nanocrystalline oxides, the research program will also include studies of hierarchal structured core-shell materials in which a metal nanoparticle is encased in a porous nano-crystalline oxide shell. Such materials have interesting catalytic properties and our goal will be to use these unique model systems to study synergistic interactions between a metal and a reducible metal oxide support. The work during the second year of the grant has focused on the catalytic and photocatalytic activity of thin films of well-defined TiO 2 nanocrystals that have a truncated bi-pyramidal shape. An overview of this work is given below.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Research Technology Laboratory (RTL) Disposition Program Final Status Survey Report

As part of the Battelle Facility Restoration Program (Smoter and Biebesheimer 2017), the Research Technology Laboratory (RTL) Complex was remediated through demolition and surveyed to show it meets the radiological release criteria for unrestricted use under the clearance process (DOE 2011). The restoration program has directed the implementation of the Multi-Agency Radiation Survey and Site Investigation Manual (MARSSIM) methodology (NRC 2011) to verify the suitability of the site to be released for unrestricted use under the clearance process in U.S. Department of Energy (DOE) Order 458.1 (Biebesheimer 2018a; DOE 2011). The use of MARSSIM is accepted by federal and state agencies, including DOE. This report documents how the MARSSIM process was used to assure any residual radioactivity is within acceptable levels and as low as reasonably achievable. Past land use for the RTL Complex property included agricultural, residential, and industrial activity. The historical site assessment (HSA) (Lindenmeier et al. 2015; Biebesheimer 2018b) identified use of radionuclides in past RTL Complex research and development activities from commissioning in 1966 until it was vacated in 2017. Based on the information provided in the HSA, the RTL Complex was delineated into six survey units. The 520 building footprint, tank vault and 530 building footprint, other building footprints, and pipeline survey units included excavated areas. The paved areas and open areas survey units were unexcavated areas. Survey units were all determined to be Class 3, with low probability of containing residual radioactivity, after demolition of the structures within the RTL Complex. The Research Technology Laboratory (RTL) Disposition Program: Final Status Survey Plan (Bunn et al. 2018) was designed and conducted to provide quantitative data regarding the residual radioactivity present in each survey unit. Authorized radiological release limits were developed and approved by the DOE Office of Science in December 2016 (DOE 2017). Fourteen random sample locations were identified within each survey unit. Forty-four specific judgmental sample locations were selected across the site based on information in the HSA. The number of sample locations within a survey unit ranged from 15 to 28, for a total of 127 random and judgmental sample locations identified across the RTL Complex. Sampling for the final status survey occurred over 12 days between November 11 and December 7, 2018. Laboratory results were independently validated by Analytical Quality Associates prior to evaluation. All of the over 880 residual radioactivity measurements were less than the release limits and action levels established through the RTL Disposition Program. A sum of fractions calculation for each survey unit resulted in values that were less than unity. Based on the results presented in this report, the restoration program recommends that the RTL Complex be released for unrestricted use.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

2021 Component Innovation Awardee: Siva Powers America

Siva Powers America earned a Competitiveness Improvement Project (CIP) Component Innovation award that will enable the company to evolve its 250/50 wind turbine design, discontinue its existing 13.4-meter wind turbine blades, and develop new 14.4-meter blades. These longer blades, which have additional extenders at the hub, will increase the rotor diameter to 35 meters, allowing for improved energy production at sites with lower wind resources. A collaboration with the National Renewable Energy Laboratory (NREL) includes a redesign, build, and on-site structural test for the new prototype blades. This will ultimately allow Siva Powers America to pursue recertification of the SIVA 250/50 to meet international standards.

CIP↗

Hierarchical Assembly of Plasmonic Nanostructures using Virus Capsid Scaffolds and DNA Origami Tiles

Building plasmonic nanostructures using biomolecules as scaffolds has shown great potential for attaining tunable light absorption and emission via precise spatial organization of optical species and antennae. Here we report bottom-up assembly of hierarchical plasmonic nanostructures using DNA origami tiles and MS2 virus capsids. These serve as programmable scaffolds that provide molecular level control over the distribution of fluorophores and nm-scale control over their distance from a gold nanoparticle antenna. While previous studies on DNA origami assembly of plasmonic nanostructures focused on the distance-dependent response of single fluorophores, these hybrid nanostructures enable us to investigate the plasmonic response of the entire ensemble of fluorescent molecules organized on the virus scaffold. By combining finite-difference time-domain (FDTD) numerical simulations with atomic force microscopy (AFM) and correlated scanning confocal fluorescence microscopy, we show that the dye molecule ensemble can effectively suppress the fluorescence quenching in the single molecule quenching regime. This bio-inspired approach to assembling plasmonic nanostructures paves the way for exploring new designs to achieve controlled light harvesting and energy transfer for optical and optoelectronic applications.

plasmonics, assembly, DNA origami, virus capsid↗