Search NASA⌕ Search

SEARCH · Search NASA

Results for “Collider”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Magnet Design Optimization for Future Hadron Colliders

Fermilab in collaboration with other members of the US Magnet Development Program (MDP) is working on the development of accelerator magnets for future hadron colliders. A 4-layer, 15-T dipole with 60 mm aperture based on Nb3Sn Low Temperature Superconductor (LTS) has been fabricated and tested. It is an important milestone of demonstrating readiness of the LTS magnet technology for the next generation of hadron colliders. At the same time, design studies aimed at boosting the magnet performance even further with the help of High Temperature Superconductors (HTS) are under way. This paper introduces a novel magnet technology - Conductor On Molded Barrel (COMB) optimized for the HTS materials and discusses possible steps towards its demonstration.

43 PARTICLE ACCELERATORS↗

The United States at the Large Hadron Collider

Why the Large Hadron Collider at CERN? The LHC, located near Geneva, Switzerland, is the world’s most powerful particle collider. It accelerates and smashes atomic nuclei together, recreating the energetic conditions that existed after the Big Bang and generating new particles. Huge detectors record the collisions, and scientists study the products.

43 PARTICLE ACCELERATORS↗

Beam-beam effects in the Super Proton-Proton Collider

The Supper Proton-Proton Collider is a next-generation hadron collider that is now being designed. A baseline design aims for a peak luminosity of about 1*10^35 cm^-2 s^-1. The focus of this article is the effect of beam-beam interactions which are expected to strongly influence stability in the beams. We start with a discussion of a scheme to generate the crossing angles at the interaction points while also correcting the dispersion thus created. The optics constraints on the achievable \b{eta}* were studied. Weak-strong simulations were performed to study single particle dynamics via tune footprints, frequency map analysis and dynamic aperture calculations. The long-range interactions with the smallest separations are shown to determine the dynamic aperture. Empirical scaling laws for the dependence of the dynamic aperture on the transverse separations and on the number of long-range interactions are found. A tune scan shows several alternative working points with slightly better dynamic aperture than the baseline choice. Finally an option to significantly increase the dynamic aperture by increasing the crossing angle for different choices of \b{eta}* was studied.

43 PARTICLE ACCELERATORS↗

An Assessment of U.S.-Based Electron-Ion Collider Science

The Committee on U.S.-Based Electron-Ion Collider Science Assessment was asked by the Department of Energy (DOE), in its statement of task, to assess the scientific justification for a U.S. domestic electron-ion collider (EIC) facility and to evaluate the importance and urgency of the science that an EIC would address to both nuclear science and the physical sciences more broadly. The committee’s task also included assessing the role of an EIC in the global context, including its relationship to other facilities within the United States and around the world. Lastly, the committee was asked to assess the broader impacts of an EIC, including on U.S. science leadership. The full statement of task is included in Appendix A. In summary, the committee finds a compelling scientific case for such a facility. The science questions that an EIC will answer are central to completing an understanding of atoms as well as being integral to the agenda of nuclear physics today. In addition, the development of an EIC would advance accelerator science and technology in nuclear science; it would also benefit other fields of accelerator-based science and society, from medicine through materials science to elementary particle physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

White Paper on High Temperature Superconducting Bi-2212 Magnets for Energy Frontier Circular Colliders

As the only high-temperature superconducting (HTS) material available as an isotropic, twisted, multifilamentary round wire, Bi-2212 is very promising for expanding the high-field superconducting accelerator magnet toolbox beyond the round-wire, isotropic Nb-Ti and Nb3Sn conductors used by HEP so far. In this paper, we describe the important roles that Bi-2212 might play for future high energy circular colliders including both high energy proton and muon colliders. We describe its present technology status (conductor development, magnet design concepts, prototype magnet status) and then provide a ten-year plan for >15 T accelerator magnets and >25 T solenoid magnets within an integrated strategy to engage industry and the entire US and international scientific enterprise interested in HTS magnet applications.

43 PARTICLE ACCELERATORS↗

Initial state QED radiation aspects for future $e^+e^-$ colliders

This white paper concerns theoretical and phenomenological aspects relevant to the physics of future $e^+e^-$ colliders, in particular regarding initial-state QED radiation. The contributions each contain key technical aspects, and are formulated in a pedagogical manner so as to render them accessible also to those who are not directly working on these and immediately-related topics. This should help both experts and non-experts understand the theoretical challenges that we shall face at future $e^+e^-$ colliders. Specifically, this paper contains descriptions of the treatment of initial state radiation from several Monte Carlo collaborations, as well as contributions that explain a number of more theoretical developments with promise of future phenomenological impact.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

REBCO -- a silver bullet for our next high-field magnet and collider budget?

High-field superconducting magnets with a dipole field of 16 T and above enable future energy-frontier circular particle colliders. Although we believe these magnets can be built, none exists today. They can also be a showstopper for future high-energy machines due to a prohibitively high price tag based on the current conductor and magnet fabrication cost. The high-temperature superconducting REBCO coated conductor can address both the technical and cost issues, a silver bullet to lay both monsters to rest. The challenges and unknowns, however, can be too arduous to make the silver bullet. We lay out a potential road forward and suggest key action items. As a contribution from the accelerator community, we attempt to clarify for our theorist and experimenter colleagues a few aspects about the future high-field superconducting magnets. We hope to stimulate an effective plan for the 2023 P5 process that can lead to a cost-effective high-field magnet technology for future colliders and the exciting physics they can steward.

43 PARTICLE ACCELERATORS↗

Critical problems of energy frontier Muon Colliders: optics, magnets and radiation

This White Paper brings together our previous studies on a Muon Collider (MC) and presents a design concept of the 6 TeV MC optics, the superconducting (SC) magnets, and a preliminary analysis of the protection system to reduce magnet radiation loads as well as particle backgrounds in the detector. The SC magnets and detector protection considerations impose strict limitations on the lattice choice, hence the design of the collider optics, magnets and Machine Detector Interface (MDI) are closely intertwined. As a first approximation we use the Interaction Region (IR) design with beta-star=3 mm, whereas for the arcs we re-scale the arc cell design of the 3 TeV MC. Traditional cos-theta coil geometry and Nb3Sn superconductor were used to provide field maps for the analysis and optimization of the arc lattice and IR design, as well as for studies of beam dynamics and magnet protection against radiation. The stress management in the coil will be needed to avoid large degradation or even damage of the brittle SC coils. In the assumed IR designs, the dipoles close to the Interaction Point (IP) and tungsten masks in each IR (to protect magnets) help reducing background particle fluxes in the detector by a substantial factor. The tungsten nozzles in the 6 to 600 cm region from the IP, assisted by the detector solenoid field, trap most of the decay electrons created close to the IP as well as most of the incoherent electron-positron pairs generated in the IP. With sophisticated tungsten, iron, concrete and borated polyethylene shielding in the MDI region, the total reduction of background loads by more than three orders of magnitude can be achieved.

43 PARTICLE ACCELERATORS↗

Project X as a Proton Driver for a Neutrino Factory and/or a Muon Collider

Project X is the current name for Fermilab’s plans for a major augmentation of its proton-based accelerators. The proposed statement of mission need for Project X includes the requirement that there be an upgrade path to provide the proton beams needed by neutrino factories and/or muon colliders. This document discusses the ramifications of that requirement. While originally envisioned to be two reports, one for each application, the present single document allows a description of those aspects of a proton driver which are common to both a neutrino factory and a muon collider and, more importantly, allows coherent descriptions of development paths that are relevant for both applications.

43 PARTICLE ACCELERATORS↗

Readout for Calorimetry at Future Colliders: A Snowmass 2021 White Paper

Calorimeters will provide critical measurements at future collider detectors. As the traditional challenge of high dynamic range, high precision, and high readout rates for signal amplitudes is compounded by increasing granularity and precision timing the readout systems will become increasingly complex. This white paper reviews the challenges and opportunities in calorimeter readout at future collider detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Positron Sources for Future High Energy Physics Colliders

An unprecedented positron average current is required to fit the luminosity demands of future $e^+e^-$ high energy physics colliders. In addition, in order to access precision-frontier physics, these machines require positron polarization to enable exploring the polarization dependence in many HEP processes cross sections, reducing backgrounds and extending the reach of chiral physics studies beyond the standard model. The ILC has a mature plan for the polarized positron source based on conversion in a thin target of circularly polarized gammas generated by passing the main high energy e-beam in a long superconducting helical undulator. Compact colliders (CLIC, C3 and advanced accelerator-based concepts) adopt a simplified approach and currently do not plan to use polarized positrons in their baseline design, but could greatly benefit from the development of compact alternative solutions to polarized positron production. Increasing the positron current, the polarization purity and simplifying the engineering design are all opportunities where advances in accelerator technology have the potential to make a significant impact. This white-paper describes the current status of the field and provides R&D short-term and long-term pathways for polarized positron sources.

43 PARTICLE ACCELERATORS↗

Muon Collider

This document is part of Subvolume C 'Accelerators and Colliders' of Volume 21 'Elementary Particles' of Landolt-Börnstein - Group I 'Elementary Particles, Nuclei and Atoms'. It contains the the Section '12.2 Muon Collider' of the Chapter '12 Outlook for the Future' with the content:

43 PARTICLE ACCELERATORS↗

Polarized Electron - Polarized Deuteron Deep-Inelastic Scattering in Electron-Ion Collider with Tagging

For the past several years there have been an intensive research and development for the possible electron-ion collider that will be able to probe deep inelastic processes at unprecedentedly high energies in eA channel. One of the important advantages of the collider kinematics in DIS processes is the possibility for an unambiguous separation of hadrons emerging from DIS and hadrons fragmenting from the target nucleus. This creates a unique possibility for tagging the interacting nucleon with the recoil slow fragments in the DIS process. The situation is most clean for the deuteron target in which case the recoil particle is a nucleon. In addition, the possibility of having polarized deuteron beams will create unprecedented opportunities in probing polarization degrees of freedom for parton distributions in the interacting bound nucleon. In this work we develop a theoretical framework for the polarized electron-polarized deuteron deep inelastic scattering in which the recoil nucleon is detected in the target fragmentation region. Two main contributions for which theoretical models are developed are the plane-wave impulse approximation, in which no reinteractions are taking place between the final state products of DIS and the recoil nucleon.

Sargsian, Misak↗

Snowmass 2021 White Paper: Electron Ion Collider for High Energy Physics

Electron Ion Collider (EIC) is a particle accelerator facility planned for construction at Brookhaven National Laboratory on Long Island, New York by the United States Department of Energy. EIC will provide capabilities of colliding beams of polarized electrons with polarized beams of proton and light ions. EIC will be one of the largest and most sophisticated new accelerator facilities worldwide, and the only new large-scale accelerator facility planned for construction in the United States in the next few decades. The versatility, resolving power and intensity of EIC will present many new opportunities to address some of the crucial and fundamental open scientific questions in particle physics. This document provides an overview of the science case of EIC from the perspective of the high energy physics community.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Update on the JLEIC Electron Collider Ring Design

The design concept of electron collider ring in the Jefferson Lab Electron-Ion Collider (JLEIC) is based on a small beam size at the interaction point (IP) to boost the luminosity. With a chosen beta-star at the IP, electron beam size is determined by the equilibrium emittance obtained by the linear optics design. In this paper, we present an update on the lattice design of the electron ring considering not only preservation of low beam emittance, but also optimization of geometric arrangement. In particular, recently development of the lattice design has been focused on incorporating the vertical dogleg, which brings the electron beam to the ion beam plane for collisions, in the spin rotator design. The vertical dogleg is designed with no horizontal emittance growth, controlled vertical emittance and no first-order effect on the electron polarization. Single particle nonlinear beam dynamics study is also performed to explore the momentum acceptance and dynamic aperture in this updated design.

Lin, F.↗

HELEN: Traveling Wave SRF Linear Collider Higgs Factory

Traveling wave SRF accelerating structures offer several advantages over the traditional standing wave structures: substantially lower $H_pk/E_acc$ and lower $E_pk/E_acc$, ratios of peak magnetic field and peak electric field to the accelerating gradient, respectively, together with substantially higher $R/Q$. In this paper we discuss how a linear collider Higgs Factory HELEN can be built using TW-based SRF linacs. We cover a plan to address technological challenges and describe ways to upgrade the collider luminosity and energy.

43 PARTICLE ACCELERATORS↗

Collider Limits on Dark Matter

Dark matter pair production at high energy colliders may leave observable signatures in the energy and momentum spectra of the objects recoiling against the dark matter. We discuss signatures of Dark Matter in the jets + missing energy and photon + missing energy channels at the Tevatron and at LEP. Working in a largely model-independent effective theory framework, we can convert the collider bounds into constraints on the dark matter-nucleon scattering cross section and on the dark matter annihilation cross section. Our bounds are highly competitive with those from direct and indirect dark matter searches, especially for light WIMPs and for WIMPs with spin-dependent or leptophilic interactions. For example, we show that LEP rules out light (<~ 10 GeV) thermal relic dark matter if annihilation into electrons is among the dominant annihilation channels.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Interaction region design for a RHIC-based medium-energy electron-ion collider

As a first step in a staged approach towards a RHIC-based electron-ion collider, installation of a 4 GeV energy-recovery linac (ERL) in one of the RHIC interaction regions is currently under investigation. To minimize costs, the interaction region of this collider has to use the present RHIC magnets for focusing of the high-energy ion beam. Meanwhile, electron low-beta focusing needs to be added in the limited space available between the existing separator dipoles. We discuss the challenges and present the current design status of this e-A interaction region.

43 PARTICLE ACCELERATORS↗