Search NASA⌕ Search

SEARCH · Search NASA

Results for “Complex materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41

Fast and accurate calculation of EXAFS Debye-Waller factors in U⁢O2 using the dynamical matrix method

Theoretical modeling of bonding dynamics in metal oxides is required for predicting their thermal conductivity, catalytic activity, and mechanical properties. A primary challenge is the scarcity of experimental methods for validating theoretical predictions of these atomic-scale dynamics. This work presents a workflow that uses experimental extended x-ray absorption fine structure (EXAFS) data collected at high temperatures to validate an interatomic force field for uranium dioxide (UO2), an important model material. The validated force field is then used to drive computationally intensive molecular dynamics (MD) simulations and as input for the much faster dynamical matrix Debye-Waller (DMDW) method. The predicted values of the Debye-Waller factors from the DMDW calculations are in good agreement with those obtained from the MD simulations, with residual pair-specific differences attributable to quantum zero-point motion at low temperatures and lattice anharmonicity at high temperatures. We further show that theoretical EXAFS spectra constructed directly from DMDW-derived Debye-Waller factors reproduce the experimental data (at relatively low temperatures) with accuracy comparable to full MD-EXAFS, providing an additional validation of the choice of the potential. This study establishes a validated, rapid computational pathway for modeling bond dynamics, naturally incorporating quantum nuclear\\\\r\\\\nstatistics absent in classical simulations, which are essential for the mechanistic understanding of complex oxide materials.

58 GEOSCIENCES↗

Strong Correlation DMRG and DFT

This project developed new ways to improve computer simulations of materials where electrons interact strongly with each other, a challenge for today’s most widely used method, density functional theory (DFT). We used an exact numerical method, the density matrix renormalization group (DMRG), to create highly accurate reference results for simple model systems, and used these to test DFT, prove when it will converge, and even train machine-learned functionals. We also invented new kinds of localized basis functions (“gausslets” and “multi-sliced gausslets”) and a “sliced-basis” approach that make high-accuracy simulations faster and more practical. These methods were applied to extended hydrogen systems, enabling the direct derivation of accurate low-energy models from first-principles calculations. We also introduced a new formalism, Conditional-Probability DFT, which could bypass traditional approximations. The tools and results from this work, including open-source software releases, will help scientists design and understand complex quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Data-driven modeling of dislocation mobility from atomistics using physics-informed machine learning

Dislocation mobility, which dictates the response of dislocations to an applied stress, is a fundamental property of crystalline materials that governs the evolution of plastic deformation. Traditional approaches for deriving mobility laws rely on phenomenological models of the underlying physics, whose free parameters are in turn fitted to a small number of intuition-driven atomic scale simulations under varying conditions of temperature and stress. This tedious and time-consuming approach becomes particularly cumbersome for materials with complex dependencies on stress, temperature, and local environment, such as body-centered cubic crystals (BCC) metals and alloys. In this paper, we present a novel, uncertainty quantification-driven active learning paradigm for learning dislocation mobility laws from automated high-throughput large-scale molecular dynamics simulations, using Graph Neural Networks (GNN) with a physics-informed architecture. We demonstrate that this Physics-informed Graph Neural Network (PI-GNN) framework captures the underlying physics more accurately compared to existing phenomenological mobility laws in BCC metals.

36 MATERIALS SCIENCE↗

Thermal Conductivity of a Novel Salt-Hydrogel Complex as a Phase Change Material for Building Thermal Management

Use of electricity for space heating, ventilation and air conditioning in buildings may be better managed through temporary energy storage. Compared with electrochemical storage, the levelized cost of thermal energy storage systems can be lower depending on geographical location and thermophysical properties [1]. In any phase change material (PCM), the rate of absorption and release of thermal energy increases with higher thermal conductivity [2]. However, leading PCMs like paraffin waxes have thermal conductivities on the order of 0.1 W/mK. Glauber’s salt, a salt hydrate, possesses a relatively high thermal conductivity but suffers from supercooling and phase segregation. Research has shown that polymer-based composites with salt hydrates can prevent phase segregation and limit supercooling over hundreds of cycles [3] though the thermal conductivity of the composite may be reduced leading to low energy storage rates. Here, we report thermal conductivity measurements on polymer hydrogels which are stable in solutions of Glauber’s salt. To measure thermal conductivity of soft gels, we use a 3-omega method [4] where heat flows bidirectionally through a substrate below and through a gel placed on top. This suits measurements of both gels and liquids unlike transient plane heat source or transient hot wire methods. We report measurements of thermal conductivity of salt-hydrogel complexes as a function of temperature, cross-linking and salt concentration. In addition, we present modeling of thermal conductivity of sodium sulfate solutions with available theories. We finally employ polarized optical microscopy to observe inside the transparent hydrogel networks, showing that precipitating crystals may influence thermal conductivity measurements for high salt concentrations. Our thermal conductivity results combined with enthalpy of phase change, mass density and specific heat are essential to accurately design thermal storage systems for energy-efficient buildings.

composite, thermal conductivity↗

Epitaxial Growth of Three-Dimensionally Mesostructured Single-Crystalline Cu 2 O via Templated Electrodeposition

Significant efforts have been made over the past few decades to realize functional three-dimensional photonic crystal devices including zero-threshold lasers, waveguides, light-emitting diodes (LEDs), and solar cells; however, progress has been limited because of difficulties in creating three-dimensional photonic crystals from single-crystal materials. Most have been formed from polycrystalline materials and thus have generally exhibited poor electronic properties. Realization of materials containing complex three-dimensional mesostructures, in single-crystal form, remains a significant challenge. Furthermore, we demonstrate the epitaxial growth of three-dimensionally mesostructured Cu 2 O by bottom-up electrodeposition through a 3D silica colloidal template. Not only is the templated Cu 2 O single crystal, but when the electrodeposition continues past the colloidal template, the crystallinity of the overlying solid Cu 2 O appears to be improved because the template blocks threading dislocations, resulting in substantial reductions in the dislocation density of the overlying solid Cu 2 O.

36 MATERIALS SCIENCE↗

Observing and Modeling the Sequential Pairwise Reactions that Drive Solid‐State Ceramic Synthesis

Abstract Solid‐state synthesis from powder precursors is the primary processing route to advanced multicomponent ceramic materials. Designing reaction conditions and precursors for ceramic synthesis can be a laborious, trial‐and‐error process, as heterogeneous mixtures of precursors often evolve through a complicated series of reaction intermediates. Here, ab initio thermodynamics is used to model which pair of precursors has the most reactive interface, enabling the understanding and anticipation of which non‐equilibrium intermediates form in the early stages of a solid‐state reaction. In situ X‐ray diffraction and in situ electron microscopy are then used to observe how these initial intermediates influence phase evolution in the synthesis of the classic high‐temperature superconductor YBa 2 Cu 3 O 6+ x (YBCO). The model developed herein rationalizes how the replacement of the traditional BaCO 3 precursor with BaO 2 redirects phase evolution through a low‐temperature eutectic melt, facilitating the formation of YBCO in 30 min instead of 12+ h. Precursor selection plays an important role in tuning the thermodynamics of interfacial reactions and emerges as an important design parameter in planning kinetically favorable synthesis pathways to complex ceramic materials.

36 MATERIALS SCIENCE↗

Predicting synthesizable multi-functional edge reconstructions in two-dimensional transition metal dichalcogenides

Abstract Two-dimensional (2D) transition metal dichalcogenides (TMDCs) have attracted tremendous interest as functional materials due to their exceptionally diverse and tunable properties, especially in their edges. In addition to the conventional armchair and zigzag edges common to hexagonal 2D materials, more complex edge reconstructions can be realized through careful control over the synthesis conditions. However, the whole family of synthesizable, reconstructed edges remains poorly studied. Here, we develop a computational approach integrating ensemble-generation, force-relaxation, and electronic-structure calculations to systematically and efficiently discover additional reconstructed edges and screen their functional properties. Using MoS 2 as a model system, we screened hundreds of edge-reconstruction to discover over 160 reconstructed edges to be more stable than the conventional ones. More excitingly, we discovered nine new synthesizable reconstructred edges with record thermodynamic stability, in addition to successfully reproducing three recently synthesized edges. We also find our predicted reconstructed edges to have multi-functional properties—they show near optimal hydrogen evolution activity over the conventional edges, ideal for catalyzing hydrogen-evolution reaction (HER) and also exhibit half-metallicity with a broad variation in magnetic moments, making them uniquely suitable for nanospintronic applications. Our work reveals the existence of a wide family of synthesizable, reconstructed edges in 2D TMDCs and opens a new materials-by-design paradigm of ‘intrinsic’ edge engineering multifunctionality in 2D materials.

Hu, Guoxiang (ORCID:0000000329428564)↗

Complex spin structure in co-trimer-chain Li 2 Co 3 Se 4 O 12

Complex magnetic materials are extremely attractive for revealing unconventional spin states and novel magnetic excitations. Here, we report the structural, thermodynamic, and magnetic properties of a novel magnetic material Li 2 Co 3 Se 4 O 12 based on x-ray and neutron diffraction, specific heat, magnetization, and x-ray photoelectron spectroscopy measurements. X-ray and neutron diffraction refinements reveal two Co sites Co (1) and Co (2) even though both are in the octahedral environment. While they are not connected along the b and c directions, these octahedra are edge-shared forming the Co (2) – Co (1) – Co (2) trimer chain along the a direction. The magnetic susceptibility exhibits the Curie-Weiss (CW) temperature dependence at high temperatures (above ∼50 K) with the negative CW temperature, a dip centered at T ⁎ ∼ 8.0 K, and an antiferromagnetic transition at T N = 3.3 K. The specific heat confirms that there is a phase transition at T N and a hump at T ⁎ . The long-range magnetic transition at T N implies that, in addition to the intra-chain interaction, there is strong inter-chain interaction, which is likely due to polarized SeO 3 bridging between chains. Single crystal neutron diffraction refinement reveals a complex magnetic structure with the angle between Co (1) and Co (2) moments ∼105°. Within the Co (2) – Co (1) – Co (2) trimer, two Co (2) moments are parallelly aligned. Surprisingly, the Co (1) moment (1.92μB) is only half of the Co (2) moment (3.96μB). There is likely the spin-state change for Co (1) from the high-spin state at T > T ⁎ to the low-spin state at T < T ⁎ , causing a dip in the magnetic susceptibility and a hump in the specific heat. When the magnetic field is applied, multiple metamagnetic transitions are found in all directions, implying field-driven magnetic excitations. Our results demonstrate rich magnetic properties of Li 2 Co 3 Se 4 O 12 that are sensitive to the external stimuli such as the magnetic field.

Antiferromagnetism↗

Multi-scale and multi-technic microstructure analysis of a linear friction weld of the metastable-β titanium alloy Ti-5Al-2Sn-2Zr-4Mo-4Cr (Ti17) towards a new Post-Weld Heat Treatment

Highlights: • Soft joint showing sharp macro-zones and marked by asymmetrical process effects • Gradient of thermomechanical loads identified through progressive stages of transformation • Highly textured recrystallized β grains at the joint core with distorted β lattice • Lattices, phase fractions, microstructures and hardness homogenized after heat treatment - Abstract: Linear Friction Welding (LFW) is a solid-state joining process producing narrow joints mainly developed for the aircraft industry. The Thermo-Mechanical Processing (TMP) loads imposed on the material cause complex microstructure transformations. This study aimed at characterizing the local microstructures and crystallographic configurations to identify the mechanisms impacting the stability and the mechanical properties of a Ti17 LFW joint with the objective of establishing an innovative homogenizing Post-Weld Heat Treatment (PWHT). The process caused a narrow zone of ±2 mm from the friction interface to reach the isothermal α → β transformation temperature under a heating rate of 500 K/s followed by quenching (−100 K/s). The TMP resulted in the formation a ±3 mm wide soft Process Affected Zone (PAZ) delimited by three characteristic zones: the Welding Line (WL width ≈ 400 μm), The Thermo-Mechanically Affected Zone (TMAZ width ≈ 1 mm) and the Heat Affected Zone (HAZ). β TMP resulted in the total dissolution of the α phase in the joint core (WL + TMAZ) and formed strongly textured {110}<111> β recrystallized grains in the WL by continuous dynamic recrystallization of squeezed prior-β grains in the TMAZ. α + β TMP led to a gradual loss of hardness in the HAZ whose microstructure is similar to the one of the base material (BM) but is subject to gradual α laths dissolution due to the local temperatures experienced during LFW. A PWHT consisting in a β annealing followed by an α + β ageing resulted in a uniformly hardened weld with a homogenized Widmanstätten microstructure in the whole assembly.

36 MATERIALS SCIENCE↗

Evaporated Se x Te 1-x Thin Films with Tunable Bandgaps for Short-Wave Infrared Photodetectors

Semiconducting absorbers in high-performance short-wave infrared (SWIR) photodetectors and imaging sensor arrays are dominated by single-crystalline germanium and III-V semiconductors. However, these materials require complex growth and device fabrication procedures. In this work, thermally evaporated Se x Te 1- x alloy thin films with tunable bandgaps for the fabrication of high-performance SWIR photodetectors are reported. From absorption measurements, it is shown that the bandgaps of Se x Te 1- x films can be tuned continuously from 0.31 eV (Te) to 1.87 eV (Se). Owing to their tunable bandgaps, the peak responsivity position and photoresponse edge of Se x Te 1- x film-based photoconductors can be tuned in the SWIR regime. By using an optical cavity substrate consisting of Au/Al 2 O 3 to enhance its absorption near the bandgap edge, the Se 0.32 Te 0.68 film (an optical bandgap of ≈0.8 eV)-based photoconductor exhibits a cut-off wavelength at ≈1.7 μm and gives a responsivity of 1.5 AW -1 and implied detectivity of 6.5 × 10 10 cm Hz 1/2 W -1 at 1.55 μm at room temperature. Importantly, the nature of the thermal evaporation process enables the fabrication of Se 0.32 Te 0.68 -based 42 × 42 focal plane arrays with good pixel uniformity, demonstrating the potential of this unique material system used for infrared imaging sensor systems.

36 MATERIALS SCIENCE↗

Modeling phase transformations in Mn-rich disordered rocksalt cathodes with machine-learning interatomic potentials

Mn-rich disordered rocksalt (DRX) cathode materials exhibit a phase transformation from a disordered to a partially disordered spinel-like structure (δ-phase) during electrochemical cycling. Here, in this computational study, we use charge-informed molecular dynamics with a fine-tuned CHGNet foundation potential to investigate the phase transformation in LixMn 0.8 Ti 0.1 O 1.9 F 0.1 . Our results indicate that transition metal migration occurs and reorders to form the spinel-like ordering in an FCC anion framework. The transformed structure contains a higher concentration of nontransition metal (0-TM) face-sharing channels, which are known to improve Li transport kinetics. Analysis of the Mn valence distribution suggests that the appearance of tetrahedral Mn 2+ is a consequence of spinel-like ordering, rather than the trigger for cation migration as previously suggested. Calculated equilibrium intercalation voltage profiles demonstrate that the δ-phase, unlike the ordered spinel, exhibits solid-solution signatures at low voltage. A higher Li capacity is obtained than in the DRX phase. This study provides atomic insights into solid-state phase transformation and its relation to experimental electrochemistry, highlighting the potential of machine-learning interatomic potentials for understanding complex oxide materials.

Zhong, Peichen [University of California, Berkeley↗

Cavity-altered superconductivity

Is it feasible to alter the ground-state properties of a material by engineering its electromagnetic environment? Inspired by theoretical predictions, experimental realizations of such cavity-controlled properties without optical excitation are beginning to emerge. Here we devised and implemented a new platform to realize cavity-altered materials. Single crystals of hyperbolic van der Waals (vdW) compounds provide a resonant electromagnetic environment with enhanced density of photonic states and prominent mode confinement. We interfaced hexagonal boron nitride (hBN) with the molecular superconductor κ-(BEDT-TTF) 2 Cu[N(CN) 2 ]Br (κ-ET). The frequencies of infrared hyperbolic modes (HMs) of hBN match the infrared-active carbon–carbon (C=C) stretching molecular resonance of κ-ET implicated in superconductivity. Nano-optical data supported by first-principles molecular Langevin dynamics simulations confirm the presence of resonant coupling between the hBN hyperbolic cavity modes and the C=C stretching mode in κ-ET. Meissner-effect measurements using magnetic force microscopy (MFM) demonstrate a strong suppression of superfluid density near the hBN/κ-ET interface. Non-resonant control heterostructures, including RuCl 3 /κ-ET and hBN/Bi 2 Sr 2 CaCu 2 O 8+x (BSCCO), do not show the pronounced superfluid suppression. These observations suggest that hBN/κ-ET realizes a cavity-altered superconducting ground state. Our work highlights the potential of dark cavities devoid of external photons for engineering electronic ground-state properties of complex quantum materials.

36 MATERIALS SCIENCE↗

Local Structural Coherence and Interfacial Charge Transfer in Cu 2 ⁢S/Mo⁢S 2 Heterostructure

Precise control over electronic coupling at nanoscale interfaces is critical for designing materials with tunable charge-transfer behavior and catalytic function. Heterostructures with locally coherent interfaces provide a platform for interrogating interfacial charge redistribution in coupled material systems. Here, we report Cu 2 ⁢S/Mo⁢S 2 heterostructures exhibiting nanoscale crystallographic alignment, which are synthesized through a rapid thermal transformation pathway. We employed electrochemical reduction reactions to probe interfacial charge transfer, revealing shifts in product distribution attributable to modified interfacial energetics, even in the absence of optimized catalytic performance. The observed formate Faradaic efficiency suggests that interfacial electronic modulation in the heterostructure shifts product selectivity towards formate, highlighting how interface-driven electronic modulation can direct reaction pathways and influence product selectivity. Optimizing catalyst loading, architecture, and reactor configuration will be critical for future improvement. Structural and compositional integrity were confirmed through powder x-ray diffraction, x-ray photoelectron spectroscopy, and high-resolution transmission electron microscopy. Electron transfer between Cu 2 ⁢S and Mo⁢S 2 domains was further evaluated by electrochemical impedance spectroscopy, while selected-area electron diffraction revealed local crystallographic alignment consistent with a local epitaxial relationship at the Cu 2 S/Mo⁢S 2 heterointerface. To illustrate the broader applicability of this approach, a Zn⁢S/Mo⁢S 2 heterostructure was also synthesized using the same microwave strategy, confirming the generalizability of interfacial engineering principles across metal sulfide-Mo⁢S 2 systems. Collectively, these findings demonstrate that controlled local epitaxial alignment serves as an effective design principle for tuning interfacial energetics and catalytic reactivity in complex heterostructure materials.

carbon capture & utilization↗

Statistically averaged molecular dynamics simulations of hydrogen diffusion in magnesium and magnesium hydrides

Magnesium has a different crystal structure from its dihydride with hydrogenation leading to a phase transition from the hexagonal closely packed Mg into a tetragonal α-MgH 2 rutile type structure. Such materials exhibit complex hydrogen uptake and release kinetics because hydrogen diffusivities significantly change when the crystal structure changes. To provide a foundational understanding of (de)hydrogenation kinetics that is applicable to all stages of the reaction, we performed statistically averaged molecular dynamics simulations to derive hydrogen diffusivities as a function of temperature and hydrogen content for both magnesium and magnesium hydride. Furthermore, our studies confirm that hydrogen diffusivities in magnesium hydride are much lower than in magnesium, in agreement with experimental data. Additionally, we observe that in either magnesium or magnesium hydride, higher hydrogen compositions result in reduced diffusivities. The latter was not revealed by prior experiments, which were conducted at fixed hydrogen composition. Finally, we discover a non-Arrhenius behavior in magnesium hydride. The physical origin of this behavior is also discussed.

36 MATERIALS SCIENCE↗

Temperature- and composition-dependent hydrogen diffusivity in palladium from statistically-averaged molecular dynamics

Solid-state hydrogen storage materials undergo complex phase transformations whose kinetics is often limited by hydrogen diffusion. Among metal hydrides, palladium hydride undergoes a diffusional phase transformation upon hydrogen uptake, during which the hydrogen diffusivity varies with hydrogen composition and temperature. Here we perform robust statistically-averaged molecular dynamics simulations to obtain a well-converged analytical expression for hydrogen diffusivity in bulk palladium that is valid throughout all stages of the reaction. Our studies confirm significant dependence of the diffusivity on composition and temperature that elucidate key trends in the available experimental measurements. Whereas at low hydrogen compositions, a single process dominates, at high hydrogen compositions, diffusion is found to exhibit behavior consistent with multiple hopping barriers. Further analysis, supported by nudged elastic band computations, suggests that the multi-barrier diffusion can be interpreted as two distinct mechanisms corresponding to hydrogen-rich and hydrogen-poor local environments.

36 MATERIALS SCIENCE↗

Nonperturbative phonon scatterings and the two-channel thermal transport in Tl 3 VSe 4

We review the role of nonperturbative phonon scattering in strongly anharmonic materials having ultralow lattice thermal conductivity with unusual temperature dependence. We take Tl 3 VSe 4 as an example and investigate its lattice dynamics using perturbation theory (PT) up to the fourth order and molecular dynamics (MD) with a machine-learning potential. We find distinct differences of phonon linewidth between PT and MD in the whole Brillouin zone. The comparison between the theoretical phonon linewidths and experiments suggests that PT severely underestimates the phonon scatterings, even when the fourth-order anharmonicity is included. Moreover, we extend our calculations to higher temperatures and evaluate the two-channel thermal conductivity based on the unified theory developed by Simoncelli et al. [Nat. Phys. 15, 809 (2019)]. We find a crucial coherence contribution to the total thermal conductivity at high temperatures. Our results pave the path for future studies of phonon properties and lattice thermal conductivities of strongly anharmonic crystals beyond the conventional PT realm.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Collective Nanoparticle Dynamics Associated with Bridging Network Formation in Model Polymer Nanocomposites

The addition of nanoparticles (NPs) to polymers is a powerful method to improve the mechanical and other properties of macromolecular materials. Such hybrid polymer–particle systems are also rich in fundamental soft matter physics. Among several factors contributing to mechanical reinforcement, a polymer-mediated NP network is considered to be the most important in polymer nanocomposites (PNCs). Here, we present an integrated experimental–theoretical study of the collective NP dynamics in model PNCs using X-ray photon correlation spectroscopy and microscopic statistical mechanics theory. Silica NPs dispersed in unentangled or entangled poly(2-vinylpyridine) matrices over a range of NP loadings are used. Static collective structure factors of the NP subsystems at temperatures above the bulk glass transition temperature reveal the formation of a network-like microstructure via polymer-mediated bridges at high NP loadings above the percolation threshold. The NP collective relaxation times are up to 3 orders of magnitude longer than the self-diffusion limit of isolated NPs and display a rich dependence with observation wavevector and NP loading. A mode-coupling theory dynamical analysis that incorporates the static polymer-mediated bridging structure and collective motions of NPs is performed. It captures well both the observed scattering wavevector and NP loading dependences of the collective NP dynamics in the unentangled polymer matrix, with modest quantitative deviations emerging for the entangled PNC samples. Here, we identify an unusual and weak temperature dependence of collective NP dynamics, in qualitative contrast with the mechanical response. Hence, the present study has revealed key aspects of the collective motions of NPs connected by polymer bridges in contact with a viscous adsorbing polymer medium and identifies some outstanding remaining challenges for the theoretical understanding of these complex soft materials.

36 MATERIALS SCIENCE↗