Search NASA⌕ Search

SEARCH · Search NASA

Results for “D”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 739 records · Page 41
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Design and physics basis for the upcoming DIII-D SAS-VW campaign to quantify tungsten leakage and transport in a new slot divertor geometry

A set of experiments are planned to exploit the high SOL collisionality enabled by a tightly baffled slot divertor geometry to suppress tungsten leakage in DIII-D. A toroidal row of graphite tiles from the Small Angle Slot (SAS) divertor is being coated with 10–15 μ m of tungsten. New spectroscopic viewing chords with in-vacuo optics will measure the W gross erosion source from the divertor surface with high spatial and temporal resolution. In parallel, the bottom of the SAS divertor is changed from a flat to a ‘V’ shape. New SOLPS-ITER/DIVIMP simulations conducted with drifts using the planned ‘V’ shape predict a substantial reduction in W sourcing and SOL accumulation in either B × ∇B direction relative to either the old SAS divertor shape or the open, lower divertor. Dedicated studies are planned to carefully characterize the level of W sourcing, leakage, and scrape-off-layer (SOL) accumulation in DIII-D over a wide range of plasma scenarios. Various actuators will be assessed for their efficacy in further reducing high-Z impurity sources and leakage from the slot divertor geometry. Finally, this coupled code-experiment validation effort will be used to stress-test physics models and build confidence in extrapolations to advanced, high-Z divertor geometries for next-step devices.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

SiC as a core-edge integrated wall solution in DIII-D

Silicon carbide (SiC) is a promising material for use in a fusion reactor due to its low hydrogenic diffusivity, high temperature strength and resilience under neutron irradiation. To assess SiC as a main wall material in DIII-D, simulations with TRIM.SP and DIVIMP are performed on a well-diagnosed L-mode discharge. The effective charge, Z eff , across the separatrix is used as a figure of merit in comparing SiC to the current graphite walls. It is found that SiC is expected to reduce Z eff , potentially by as much as ~50%. It is discussed how SiC may be expected to "self-condition" and create wall conditions similar to siliconization, further lowering Z eff due to efficient oxygen gettering. Furthermore, the potential benefits are reviewed and a path towards SiC walls in DIII-D is presented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Experiment-modeling studies comparing energy dissipation in the DIII-D SAS and SAS-VW divertors

Recent DIII-D experiments on Small Angle Slot (SAS) divertors have confirmed that a combination of divertor closure and target shaping can enhance cooling across the divertor target and increase energy dissipation, but with significant dependence on B T (toroidal magnetic field) direction. In these novel divertors, the roles of closure, target shaping, drifts, and scale lengths are all interconnected in optimizing dissipation, with the separatrix electron density n eSEP being the key parameter associated with the level of dissipation/detachment. After modifying the original flat-targeted graphite SAS to include a V shape with a tungsten coating on the outer side of the divertor (SAS-VW), matched series of discharges were run to compare to detailed SOLPS-ITER modeling. Experimentally, when run as designed with the outer strike point at the slot vertex, SAS-VW requires nearly identical n eSEP for detachment as the original SAS, with little difference in dissipation for the new geometry. This is in contrast to (1) earlier modeling predictions that a small change of the SAS geometry to a V shape should enhance dissipation at the same n eSEP for magnetic configurations having better H-mode access (ion B × ∇B drift directed into the divertor), and (2) despite the achievement of significantly higher (2-7x) neutral pressures and compression in the SAS-VW slot. Comparisons of experimental density scans to the most recent SOLPS-ITER modeling with ExB drifts show reasonable agreement for dissipation/detachment onset when using separatrix density as the independent parameter. In order to help understand the discrepancy in modeled vs actual performance for the new configuration, additional measurements varying gas injection location and impurity injection were undertaken. In-slot D 2 gas fueling is more effective (5–22 %) in promoting detachment, in accord with modeling. In-slot impurity injection (N 2 or Ne) can yield 30 % lower core Z eff and 15 % less confinement degradation after detachment compared to main chamber puffing, as well as relatively lower tungsten leakage from the divertor. Modeling can also reproduce the improved detachment seen as the strike point moves inboard of the slot vertex. While we can explain the effects of the most important parameters causing energy dissipation in these slot divertors, it remains that many aspects of their behavior cannot be accurately modeled using state-of-art codes such as SOLPS-ITER. This is of concern for future model-driven designs utilizing similar V-shaped geometries.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Electron recombination of rotationally cold D 2 H + ions

Dissociative recombination (DR) of electrons with small molecular ions is a fundamental process for the physics and chemistry of the interstellar medium and planetary atmospheres. In previous DR studies, detailed analysis of the experimental rate coefficients has been hindered by the difficulty of preparing the ions in well-defined quantum states. For polyatomic ions in particular, truly state-selective measurements have been elusive, allowing only qualitative benchmarks of theory. Here, we present DR studies of the deuterated triatomic hydrogen ion D 2 H + , where the molecular ions were stored for up to 1000 seconds inside the Cryogenic Storage Ring (CSR) prior to the DR measurements. Our experiments with rotationally cold D 2 H + ions allow for detailed comparison to state-of-the-art theoretical calculations. We obtain very good agreement between experiment and theory even in the important collision energy range from 1 meV to 0.5 eV, where a multitude of Rydberg resonances reveal their imprint on the rate coefficient.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Development of the first relativistic electron loss probe with pitch and energy resolution in the DIII-D tokamak

A relativistic electron probe has been developed in the DIII-D tokamak, capable of simultaneously resolving pitch angles and energies of runaway electrons (REs) for the first time. Due to the relativistic speeds of REs, their gyro-orbit size becomes comparable to those of fast deuterium with energies in the tens of keV range. This allows for the measurement of RE strike images on a phosphor plane, with their orbits being deflected by the Lorentz force as they pass through a pinhole aperture. The strike positions correspond to the energies and pitch of the incident REs. Monte Carlo N-Particle Transport Code has shown that an ultra-thin phosphor coating significantly reduces the energy deposition from γ-rays, while allowing a much greater deposition from REs, minimizing the background noise. Finally, the novel system, developed for the DIII-D tokamak, is expected to provide unprecedented insights into the phase-space dynamics of REs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Evaluation of silicon carbide as a divertor armor material in DIII-D H-mode discharges

Silicon carbide (SiC) represents a promising but largely untested plasma-facing material (PFM) for next-step fusion devices. In this work, an analytic mixed-material erosion model is developed by calculating the physical (via SDTrimSP) and chemical (via empirical scalings) sputtering yield from SiC, Si, and C. The Si content in the near-surface SiC layer is predicted to increase during D plasma bombardment due to more efficient physical and chemical sputtering of C relative to Si. Silicon erosion from SiC thereby occurs primarily from sputtering of the enriched Si layer, rather than directly from the SiC itself. SiC coatings on ATJ graphite, manufactured via chemical vapor deposition, were exposed to repeated H-mode plasma discharges in the DIII-D tokamak to test this model. The qualitative trends from analytic modeling are reproduced by the experimental measurements, obtained via spectroscopic inference using the S/XB method. Quantitatively the model slightly under-predicts measured erosion rates, which is attributed to uncertainties in the ion impact angle distribution, as well as the effect of edge-localized modes. After exposure, minimal changes to the macroscopic or microscopic surface morphology of the SiC coatings were observed. Compositional analysis reveals Si enrichment of about 10%, in line with expectations from the erosion model. Extrapolating to a DEMO-type device, an order-of-magnitude decrease in impurity sourcing, and up to a factor of 2 decrease in impurity radiation, is expected with SiC walls, relative to graphite, if low C plasma impurity content can be achieved. Furthermore, these favorable erosion properties motivate further investigations of SiC as a low-Z, non-metallic PFM.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Demonstration of reconstruction-free static magnetic control of DIII-D plasma with deep reinforcement learning

This paper presents the development and experimental validation of a reinforcement learning (RL)-based magnetic controller on the DIII-D tokamak. The controller directly maps raw magnetic diagnostic signals to actuator commands, replacing the traditional isoflux control algorithm based on equilibrium reconstruction. Four RL controllers are trained using the Soft Actor–Critic algorithm with an asymmetric Actor–Critic architecture in the NSFsim simulator. All controllers are deployed in the DIII-D Plasma Control System and operated with a 4 kHz feedback loop. Two randomization strategies are evaluated during training: evolving kinetic profiles and fixed kinetic profiles within each episode. The latter approach is found to better capture experimental deviations in the current density profile and to provide overall improved control performance. Robust operation is demonstrated across heating power scans in both L- and H-mode plasmas, as well as during transient events such as L–H transitions and pellet injections. Control errors in plasma shape and radial position remained within 1.5–2.0 cm and 1 cm, respectively. A notable discrepancy was observed in the vertical X-point position, with errors of up to approximately 4 cm, attributed to the current density distribution mismatches between simulations and experiments.

DIII-D↗
DOE OSTI2020

Level Structure of {sup 31}S Via {sup 32}S({ital p,d}) {sup 31}S

Background: Properties of proton-unbound S-31 states determine the P-30(p, gamma) S-31 reaction rate, which has a significant impact on explosive hydrogen burning in classical novae and type-I x-ray bursts. Despite several previous studies, uncertainties still remain with respect to the nuclear structure of S-31 near the proton threshold. Purpose: The level structure of S-31 has been presently investigated via a charged-particle spectroscopy experiment using the S-32(p, d) S-31 reaction. Method: Deuterons corresponding to S-31 excited states with 3.285 <= E-x <= 10.8 MeV were momentum analyzed via an Enge split-pole spectrograph at six laboratory angles between 10 degrees and 62 degrees. Differential cross sections of the S-32(p, d)S-31 reaction were measured at E-p = 34.5 MeV. Distorted-wave Born approximation calculations were performed to constrain the spin-parity assignments of several of the observed levels. Results: We have detected 72 excited states of S-31, out of which 17 are within the astrophysical region of interest corresponding to the temperature range of 0.1-1.5 GK. We have resolved the discrepancy in the spin and parity of an excited state with E-x = 6542 keV, showing that is it not J(pi) = 3/2(-), and therefore the contribution of this state to the P-30(p, gamma) reaction rate is likely much less significant than previously thought owing to the larger angular-momentum transfer required to populate this excited state. Moreover, our measurement results help consolidate the spin-parity assignments for the 6377 and 6636 keV states in S-31. Conclusions: This work presents the most comprehensive spin-parity assignments to date from a single-neutron transfer reaction on S-32 to S-31 excited states in the region between 6 to 7 MeV excitation energy. This region is significant for the determination of the P-30(p, gamma)S-30 reaction rate over the temperatures characteristic of explosive hydrogen burning in novae.

Setoodehnia, K.↗
DOE OSTI2022

Experimental study of the isomeric state in 16 N using the 16 N$^{g,m}$($\textit{d}$, 3 He) reaction

Here, the isomeric state of 16 N was studied using the 16 N$^{g,m}$($\textit{d}$, 3 He) proton-removal reactions at 11.8 MeV/u in inverse kinematics. The 16 N beam, of which 24% was in the isomeric state, was produced using the Argonne Tandem-Linac Accelerator System (ATLAS) in-flight system and delivered to the Helical Orbit Spectrometer (HELIOS), which was used to analyze the 3 He ions from the ($\textit{d}$, 3 He) reactions. The simultaneous measurement of reactions on both the ground state and the isomeric states, reduced the systematic uncertainties from the experiment and in the analysis. A direct and reliable extraction of the relative spectroscopic factors was made based on a distorted-wave Born approximation approach. The experimental results suggest that the isomeric state of 16N is an excited neutron-halo state. The results can be understood through calculations using a Woods-Saxon potential model, which captures the effects of weak binding.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Search for e + e − → φ χ c 0 and φ η c 2 ( 1 D ) at center-of-mass energies from 4.47 to 4.95 GeV

Utilizing a dataset of 6.7 fb − 1 from electron-positron collisions recorded by the BESIII detector at the BEPCII storage ring, a search is conducted for the processes e + e − → ϕ χ c 0 and ϕ η c 2 ( 1 D ) across center-of-mass energies from 4.47 to 4.95 GeV. In the absence of any significant signals, upper limits are set. These include limits on the dressed cross sections for e + e − → ϕ χ c 0 , as well as the product of the dressed cross section for e + e − → ϕ η c 2 ( 1 D ) and a sum of five branching fractions. Furthermore, the product of the electronic width of Y ( 4660 ) and the branching fraction of the Y ( 4660 ) → ϕ χ c 0 , denoted as Γ e + e − Y ( 4660 ) B Y ( 4660 ) → ϕ χ c 0 , is determined to be < 0.35 eV at the 90% confidence level. Published by the American Physical Society 2025

Ablikim, M.↗
DOE OSTI2024

R ( 3780 ) Resonance Interpreted as the 1 D 1 3 -Wave Dominant State of Charmonium from Precise Measurements of the Cross Section of e + e − → Hadrons

We report the precise measurements of the cross section of e + e − → hadrons at center-of-mass energies from 3.645 to 3.871 GeV. We thereby perform the most precise study of the cross sections and find a complex system composed of three resonances of R ( 3760 ) , R ( 3780 ) , and R ( 3810 ) . For the first time, we measure the R ( 3810 ) electronic width to be ( 19.4 ± 7.4 ± 12.1 ) eV . For the R ( 3760 ) resonance, we measure the mass to be ( 3751.9 ± 3.8 ± 2.8 ) MeV / c 2 , the total width to be ( 32.8 ± 5.8 ± 8.7 ) MeV , and the electronic width to be ( 184 ± 75 ± 86 ) eV . For the R ( 3780 ) resonance, we measure its mass to be ( 3778.7 ± 0.5 ± 0.3 ) MeV / c 2 , total width to be ( 20.3 ± 0.8 ± 1.7 ) MeV , and electronic width to be ( 265 ± 67 ± 83 ) eV . Forty-seven years ago, the ψ ( 3770 ) resonance was discovered, and was subsequently interpreted as the 1 D 1 3 -wave dominant state of charmonium. However, our analysis of the total-hadron cross sections indicates that the ψ ( 3770 ) is not a single state, but a complex system composed of the R ( 3760 ) , R ( 3780 ) , and R ( 3810 ) resonances. Among these, we interpret the R ( 3780 ) is a resonance dominated by the 1 D 1 3 charmonium state. Published by the American Physical Society 2024

Ablikim, M.↗
DOE OSTI2020

Tighter Confinement Increases Selectivity of d-Glucose Isomerization Toward l-Sorbose in Titanium Zeolites

Aqueous-phase isomerization of D-glucose to D-fructose and L-sorbose is catalyzed in parallel by Lewis acidic Ti sites in siliceous frameworks. Glucose isomerization rates (per Ti, 373 K) are undetectable when Ti sites are confined within mesoporous voids (Ti-MCM-41, TiO 2 -SiO 2 ) and increase to detectable values when Ti sites are confined within the smaller 12-membered ring (12-MR) micropores of Ti-Beta. Furthermore, isomerization rates decrease to lower values (by ≈20×) with further decreases in micropore size as Ti sites are confined within 10-MR pores (Ti-MFI, Ti-CON), likely because of intrapore reactant diffusion restrictions, and reach undetectable values within the 8-MR pores of Ti-CHA as size exclusion prevents glucose from accessing active sites. Remarkably, the selectivity toward l -sorbose over d -fructose increases systematically as spatial constraints around Ti sites become tighter, and is >10 on Ti-MFI. These findings demonstrate the marked influence of confinement around Ti active sites on the selectivity between parallel stereoselective sugar isomerization pathways.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Large-d phase transitions in holographic mutual information

In the AdS/CFT correspondence, the entanglement entropy of subregions in the boundary CFT is conjectured to be dual to the area of a bulk extremal surface at leading order in G N in the holographic limit. Under this dictionary, distantly separated regions in the CFT vacuum state have zero mutual information at leading order, and only attain nonzero mutual information at this order when they lie close enough to develop significant classical and quantum correlations. Previously, the separation at which this phase transition occurs for equal-size ball-shaped regions centered at antipodal points on the boundary was known analytically only in 3 spacetime dimensions. Inspired by recent explorations of general relativity at large- d , we compute the separation at which the phase transition occurs analytically in the limit of infinitely many spacetime dimensions, and find that distant regions cannot develop large correlations without collectively occupying the entire volume of the boundary theory. We interpret this result as illustrating the spatial decoupling of holographic correlations in the large- d limit, and provide intuition for this phenomenon using results from quantum information theory. We also compute the phase transition separation numerically for a range of bulk spacetime dimensions from 4 to 21, where analytic results are intractable but numerical results provide insight into the dimension-dependence of holographic correlations. For bulk dimensions above 5, our exact numerical results are well approximated analytically by working to next-to-leading order in the large- d expansion.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2020

Symmetry-enriched quantum spin liquids in (3 + 1)d

We use the intrinsic one-form and two-form global symmetries of (3+1)d bosonic field theories to classify quantum phases enriched by ordinary (0-form) global symmetry. Different symmetry-enriched phases correspond to different ways of coupling the theory to the background gauge field of the ordinary symmetry. The input of the classification is the higher-form symmetries and a permutation action of the 0-form symmetry on the lines and surfaces of the theory. From these data we classify the couplings to the background gauge field by the 0-form symmetry defects constructed from the higher-form symmetry defects. For trivial two-form symmetry the classification coincides with the classification for symmetry fractionalizations in (2 + 1)d. We also provide a systematic method to obtain the symmetry protected topological phases that can be absorbed by the coupling, and we give the relative ’t Hooft anomaly for different couplings. We discuss several examples including the gapless pure U(1) gauge theory and the gapped Abelian finite group gauge theory. As an application, we discover a tension with a conjectured duality in (3 + 1)d for SU(2) gauge theory with two adjoint Weyl fermions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Approximate symmetries in d = 4 CFTs with an Einstein gravity dual

By applying the stress-tensor-scalar operator product expansion (OPE) twice, we search for algebraic structures in d = 4 conformal field theories (CFTs) with a pure Einstein gravity dual. We find that a rescaled mode operator defined by an integral of the stress tensor T ++ on a d = 2 plane satisfies a Virasoro-like algebra when the dimension of the scalar is large. The structure is enhanced to include a Kac-Moody-type algebra if we incorporate the T -- component. In our scheme, the central terms are finite. It remains challenging to directly compute the stress-tensor sector of d = 4 scalar four-point functions at large central charge, which, based on holography and bootstrap methods, were recently shown to have a Virasoro/ $\mathcal{W}$-algebra vacuum block-like structure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2022

Universal location of Yang–Lee edge singularity for a one-component field theory in 1 ≤ d ≤ 4

Herein we determine the universal location of the Yang–Lee edge singularity in the entire relevant domain of spatial dimensions 1 ≤ d ≤ 4 for the Ising universality class. To that end, we present analytical results for d = 1,2,4 and near four dimensions. For d = 3 and a set of fractional dimensions, we perform numerical calculations using a systematic Functional Renormalization Group approach.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Validation of NSFsim as a Grad-Shafranov equilibrium solver at DIII-D

Plasma shape is a significant factor that must be considered for any Fusion Pilot Plant (FPP) as it has significant consequences for plasma stability and core confinement. A new simulator, NSFsim, has been developed based on a historically successful code, DINA [1], offering tools to simulate both transport and plasma shape. Specifically, NSFsim is a free boundary equilibrium and transport solver and has been configured to match the properties of the DIII-D tokamak. This paper is focused on validating the Grad-Shafranov (GS) solver of NSFsim by analyzing its ability to recreate the plasma shape, the poloidal flux distribution, and the measurements of the simulated diagnostic signals originating from flux loops and magnetic probes in DIII-D. Five different plasma shapes are simulated to show the robustness of NSFsim to different plasma conditions; these shapes are Lower Single Null (LSN), Upper Single Null (USN), Double Null (DN), Inner Wall Limited (IWL), and Negative Triangularity (NT). The NSFsim results are compared against real measured signals, magnetic profile fits from EFIT [2], and another plasma equilibrium simulator, GSevolve [3]. EFIT reconstructions of shots are readily available at DIII-D, but GSevolve was manually ran by us to provide simulation data to compare against.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Preliminary proof-of-concept of real-time divertor heat flux control from infrared cameras with nitrogen injection in the DIII-D tokamak

In future tokamak reactors like ITER and the Fusion Pilot Plant (FPP), real-time feedback control of heat flux to the plasma-facing components (PFC) will be critical for steady-state operation. This work presents the first experimental demonstration of real-time divertor heat flux estimation with infrared thermography and feedback control with impurity seeding on the DIII-D tokamak. The flexible infrastructure of the Plasma Control System (PCS) on DIII-D makes this new capability possible. The PCS software runs on a gateway computer system, and five real-time compute nodes. An array of low latency streaming digitizers from D-TACQ Solutions connects to these real-time computers to collect and process data, and send commands to actuators during plasma discharges. This system handles the signal IO from the tokamak and allows the PCS to utilize the diagnostic data necessary to perform control in real-time. Feedback control on heat flux was accomplished by feeding infrared camera data from the “Infrared TV” (IRTV) camera to a custom-developed User Datagram Protocol (UDP) server. This server transmits infrared data to a newly developed PCS algorithm that estimates the heat flux to PFC. Here, a proportional integral derivative (PID) controller minimizes the error between a heat flux reference and the real-time estimate by injecting nitrogen gas into the divertor.

Algorithm development↗